Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹41.4 LAccepted-AOC | L1 | Accepted-AOC Lowest | |
| 2 | L2₹42.1 L+₹68,040 (1.64%)Rejected-Finance MOURYA HEIGHTS SATAVNAGAR HANDEWADI ROAD HADAPSAR PUNE 28 | PUNE | MAHARASHTRA | 411028 | L2 | Rejected-Finance Not Lowest | |
| 3 | L3₹42.3 L+₹87,162 (2.10%)Rejected-Finance FLAT NO 601 TOWER NO 30 SECTOR NO 21 AMANORA PARK TOWN HADAPSAR PUNE 411028 | PUNE | MAHARASHTRA | 411028 | L3 | Rejected-Finance Not Lowest | |
| 4 | L4₹43.9 L+₹2.5 L (5.97%)Rejected-Finance FLAT NO A 15 ARCHANA GREEN SOCIETY NIBM ROAD KONDHWA PUNE 411048 | PUNE | MAHARASHTRA | 411048 | L4 | Rejected-Finance Not Lowest | |
| 5 | L5₹44.9 L+₹3.5 L (8.34%)Rejected-Finance | L5 | Rejected-Finance Not Lowest |
Tender Value
₹44.9 L
EMD Value
₹89,820
Closing Date
29 Jun 2022, 6:00 pmClosed
GE NORTH PUNE
Garrison Engineer North General Cariappa Marg Camp Pune 411001
GE (N) P/TOKEN- 27 OF 2022-2023 PROVISION OF CERTAIN LBW, MW AND SPECIAL REPAIR WORKS IN THE AREA OF AGE B/R (EAST) AND AGE E/M (NORTH) UNDER GE (NORTH) PUNE
2022_MES_528071_1
GE (N) P/TOKEN- 27 OF 2022-2023
Open Tender
Civil Works
Item Rate
270 days
GE NORTH PUNE
Refer tender documents.
8 documents required · 8 mandatory
₹500
GE NORTH PUNE
₹89,820
Yes
26 Sept 2022
2 Jun 2022
1 Jul 2022
2 Jun 2022
29 Jun 2022
17 Jun 2022
Amount
Surface excavation not exc 30 cm deep and averaging 15 cm deep and getting out in any type of soil complete all as specified and as directed
Excavating over areas n.exc. 1.5 m deep in any type of soil and getting out in any type of soil complete all as specified and as directed
Excavation in trenches n.exc 1.5m wide and n.exc 1.5m in depth for foundation, manholes , inside drains etc and getting out in Soft/loose soil complete all as specified and as directed
Returning filling in including spreading levelling watering and well ramming in layers n.exc 25cm in dense/hard soil complete all as specified and as directed
Removing the excavated surplus soil not exceeding 50 mtr but exc 1.5km, n.exc 5 km and depositing where directed at a level n.exc 1.5 mtr above the starting point complete all as specified and as directed
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises.
Demolition of cement concrete in any position, sunken portion etc un-reinforced complete all as specified and as directed.
M&L for moorum filling in floors with moorum brought from outside MD land, laid in layers n. exc 15 cm thick spread, levelled and rammed including watering etc complete all as specified and as directed
Removing building materials etc to a distance of 1.5km incl loading and unloading and stacking at the destination. and depositing where directed complete all as specified and as directed
M&L for broken stone hard core of gauge n.exc 63mm deposited, spread and leveled in layers not exc 15cm thick, watered and rolled, rammed to a true surface complete all as specified and as directed
M&L for 100mm thick PCC (1:3:6) type C2 (using 40mm graded stone agg) as in sub base complete all as specified and as directed
M&L PCC (1:3:6) type D-2 (40mm graded stone agg) as mass concrete as in foundation complete all as specified and as directed
M&L 75mm thick PCC 1:3:6 type C2 (20mm graded stone agg) as in plinth protection fixed even and smooth with out using extra cement complete all as specified and as directed
M&L PCC (1:2:4) type B-1 using 20mm stone graded aggregate as in coping complete all as specified and as directed
M&L Precast cement concrete block masonry with solid blocks using type B1, 1:2:4 (20mm graded aggregate) set in cement mortar 1:6 complete all as specified and as directed
M&L 40mm thick PCC 1:2:4, type B1 including smooth finish of concrete surfaces complete all as specified and as directed
M & L for ATT of soil under existing floors using Chloropyriphos 2% EC emulsion at the rate 1 liter per hole, 300mm apart including drilling & plugging 12mm dia holes with cement mortar 1:2 (1 cement: 2 coarse sand) to match the existing floors complete all as specified and as directed.
M&L coloured vitrified double charged tiles 10mm thick (square/rectangular) area of each tile exc 0.18sqm but not exc 0.36 sqm as in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the tiles incl 20mm thick screed bed or bedding layer in CM 1:6 and dismantling/demolition on existing surface complete all as specified and as directed. Make : Kajaria/NITCO/Johnson.
-Ditto- all as per item No 18 here in before but skiting/dado on 10mm thick plaster in CM 1:4 complete all as specified and as directed
M&L for vitrified colour ceramic double charged/dark shade tiles 10 mm thick, area of each tiles exc 0.36 sqm but n.exc 0.42 sqm in floors set & jointed in neat cement slurry & pointed in coloured cement to match including 20 mm thick screed bed in CM 1:6 complete all as specified and as directed.
M&L for vitrified colour ceramic double charged/dark shade tiles 10 mm thick, area of each tiles exc 0.36 sqm but n.exc 0.42 sqm in Skirting /dado set & jointed in neat cement slurry & pointed in coloured cement to match including 10 mm thick back coat in CM 1:4 complete all as specified and as directed.
M&L for Joint free Non skid colour ceramic tiles 7 to 8 mm thick area of each tile exc 0.18Sqm but not exc 0.38 Sqm laid in floors set & jointed in neat cement slurry & pointed in coloured cement to match including 20mm thick screed bed or bedding layer in CM 1:6 complete all as specified. Make : Kajaria/NITCO/ Johnson. complete all as specified and as directed
M&L glazed ceramic coloured tiles of size 450 x 300 x 7mm thick, on vertical surfaces of walls such as skirting dado etc. set and jointed in neat cement slurry and pointed in white or colour cement to match including 10mm thick rendering in cement mortar 1:4 and dismantling existing floor tiling complete all as specified and as directed. Make : Kajaria/NITCO/Johnson.
M&L vitrified coloured tiles of size 400mmx400mmx9-10mm thick laid set and jointed in neat cement slurry and pointed in white or colour cement to match including 20mm thick screed bed or bedding in CM 1:6 with adhesive complete all as specified and as directed. Make : Kajaria/NITCO/Johnson.
M&L for providing filleting in any position and to any shape in cement mortar 1:3 incl all mitres etc stops etc section of fillet exc 25 but n.exc 50 sqcm complete all as specified and as directed
M&L in repair old size brick fly ash bricks straight or curbed on exc 6M mean radius built in CM 1:6 complete all as specified and as directed
S&F GI chicken wire mesh at the junctions of wall/column/ beam at suitable size to avoid cracks before plasteing at the areas required all as specified and as directed
Taking down cement plaster on brick/ block walling including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and as directed
M&L for rendering 15mm thick in CM (1:6) on brick or concrete surfaces finished with a thin layer of sagol finish complete all as specified and as directed
M&L for rendering 15mm thick on fair faces of brick or concrete wall surfaces in CM (1:4) finished with sponge finish complete all as specified and as directed
M&L Granite (of any type), 18- 20mm thick (table rubbed and polished) in steps, jambs, pillars, window cills,cooking platform,WHB plateform and like in cement mortar (1:4) incl pointing in white cement (1:2) using marble dust with admixer of pigment to match with marble shade including making full curving the edges complete including 15 mm thick screed bed in CM 1:4 complete all as specified and directed.
M&L for machine cut 20mm to 25mm thick polished cudappah stone slab as in shelves, partitions, cooking platform below granite stone and like including necessary jointing and pointing and making good to disturbed surface complete all as specified and as directed
S&F vitreous china European type wash down water closet pan (Pedestal pattern) of Rimless Single piece-WC with UF soft close seat cover, Hinges, Fixing Accessories, Assessories set and Cistern fittings, size: 390x710x720mm with S trap 300mm including making good complete all as specified and as directed. Make : Jaquar Cat No VGS-WHT-81851SN or equivalent
S & F vitreous china table top basin thin rim round in shape of size 360x360x120mm excluding taps but incl necessary brackets CP brass wastes coupling and other fittings complete all as specified and as directed. Make: Jaquar Cat No.SLS-WHT-6905 or equivalent
S&F in repair 15mm dia brass chromium plated fancy type, pillar tap with extension body with fly nuts capstan head screwed down high pressure with or Without lettered hot or cold with long scewed shank complete all as specified and as directed.Make: Jaquar Cat No.VGP-81021N or equivalent
Taking down hand shower (health faucet) of cast copper alloy chromium plated with 8mm dia, 1m long flexible tube and wall hook and refixing in the same location complete all as specified and directed by Engr-in-charge.
Taking down chromium plated bib cock with wall flange quarter turn and refixing in the same location complete all as specified and as directed.
Taking down wall mixer brass chromium plated quarter turn 2 in 1 with provision for over head shower bend pipe on upper side connecting legs and wall Flanges suitable for fixing with GI pipes 15mm dia, and refixing in the same locationcomplete all as specified and as directed.
Taking down angle cock with flange quarter turn chromium plated cast copper alloy ISI marked, high pressure screwed down and refixing in the same location complete all as specified and as directed
Taking downTwo Way bib taps with wall flange quarter turn suitable for 15mm bore pipe long body fancy type brass CP, screwed down screwed for iron pipe or brass ferrule and refixing in the same location complete all as specified.
Taking down and refixing CP Exposed shower pipe with provision for simultaneous working of showers with operating Divertor Knob with sliding holder for Handshower, wall brackets & 15mm concealed water inlet connection (for connection to concealed shower mixer) without shower complete all as specified and as directed.
S&F in repair Toilet paper holder of stainless steel, all as specified and as directed. Make: Johnson Fusion series Cat part No: T3254C or equivalent as approved by the GE.
S & F in repair brass Chromium plated soap dispenser with glass bottle, fixed to wall with CP brass screws, all as specified and as directed. Make: JAQUAR Cat Part No. AKP-35735P or equivalent
S & F in repair brass Chromium plated soap dish , fixed to wall with CP brass screws, all as specified and as directed . Make: JAQUAR Cat Part No. AQN-7731 or equivalent
S&F Single Towel Rail 600mm long chrome plated fixed with and incl Chromium plate Brass screws complete all as specified and as directed.Make: JAQUAR Cat Part No. CAN-1111SM or equivalent
S&F in repair Brass Chromium plated towel ring all as specified and as directed. Make: JAQUAR Cat Part No. AKP-35721P or equivalent
S/F for 110mm dia PVC (SWR) grade single socketed pipes in any length complete with rubber ring joints fixed to walls complete all as specified and as directed.
S/F repair for 75mm dia PVC (SWR) grade single socketed pipes in any length complete with rubber ring joints fixed to wall complete all as specified and as directed
M&L for 110mm dia PVC (SWR) grade single socketed pipes in any length complete with rubber ring joints or fixed in trenches or in floors complete all as specified and as directed.
M&L for 75mm dia PVC (SWR) grade single socketed pipes in any length complete with rubber ring joints laid in trenches and fixed in floors complete all as specified and as directed
S&F 110mm bore PVC (SWR) bends any radius complete all as specified and as directed
S&F 75mm bore PVC (SWR) bends any radius complete all as specified and as directed
S&F PVC (SWR) junction (Single ‘T’) of size 110mm bore complete all as specified and as directed
S&F PVC (SWR) junction (Single ‘T’) of size 75mm bore complete all as specified and as directed
S&F PVC (SWR) vent cowl of size 110mm bore complete all as specified and as directed
S&F PVC (SWR) floor trap, plain with grating including jointing with solvent cement, 75mm dia complete all as specified and as directed
Taking down chowkats or frames not exc. 1.5 sq. m each with shutters (without taking off shutters from the frames) complete all as specified and as directed
Taking down chowkhat or frame with shutter (without taking off shutter from the frame) exc. 1.5 sq.m but n exc 4 sqm each incl taking out hold fast complete all as specified and as directed.
Taking down Aluminium door with frames exc. 1.5 sq. m but n exc 4 sqm each complete and refxing again in same opening after complete all as specified and directed
S&F powder coated Anodized Aluminium Frame for partition with one or more rebates including joining cleat, good quality of, PVC rubber lining for fixing particle board etc complete all as specified and as directed
S&F fully glazed single/double leaf openable door, using aluminium powder coated sections on door floor spring, pivots, with 5 mm thick glass in panels fixed with aluminium glazing clips section No. 19381 and 19352 and PVC rubber beading all around including with 1” interlock and handle, two lever door lock, sliding wheel etc sections as given below and all as specified and as directed.Top-19528, Middle – 19575, Bottom – 19530, Vertical – 19526, 1” Interlock (20939), 1” Handle (20602)
S&F for aluminium powder coated three track sliding window with two glazed shutters, with 4mm thick tinted glass of modigaurd and one shutter of stainless steel wire mesh 0.25 mm to 0.36mm nominal dia of wire & average width of aperture 1.40mm to 2mm including good quality of bearing handle, locks, PVC rubber lining etc complete all as specified and as directed. Catlouge numbers of Jindal company or equivalent make as specified. Sections of Jindal company : Three track bottom – 20957, Three track top/vertical – 20958,Handle – 20606, Interlocking – 20605, Top and bottom – 20604.
S&F 5.0 mm thick tinted glass including rubber beading for securing sheet glass in aluminium frame work complete all as specified and as directed.
Factory made 100 % solid wood plastic composite(WPC) door frame, single rivet 90 mm x 45 mm made from wood plastic composite (Single extruded process) material with density 780 Kg/ Cum and complete all as specified and directed.NOTE: During Fixing of chowkhat, surface Shall be make good in plumb with existing finishes like cement plaster, similar wall tile,floor tile etc and as per site requirement complete all as specified and as directed
S&F factory Made Solid PVC Molded shutter shutterof 30 mm thick, consisting of frame made up of MS tube of size 40mm X 20mm (19 gauge) for top, bottom rail, and in styles rail, ,with 2, 4, or 6 raised panel design with 5mm thick Molded PVC prelamenated Sheet on the front face & 5mm thick Plelaminated plane PVC sheet on back face.Inside core shall be of PVC solid board of 20 mm thick. Door shall be providede with 20 mm thick Pvc lipping all around the edges , fixing in frame at site complete all as specified and directed Note : All screws shall be self tapping and length of Screw not less than 50 mm.
S&F Stainless steel butt hinges medium weight 100mm complete all as specified and as directed. NOTE :- All screws shall be self tapping chrome plated and length of screw not less 38 mm
M&L for preparation of newly plastered surfaces of walls and applying two coats of cement base paint over one coat of primer complete all as specified and as directed
M&L for preparation of newly plastered surfaces of walls and applying two coats of OBD over a coat of primer complete all as specified and as directed.
M&L for preparation of newly plastered surfaces of wall and applying two coats of cement base paint over a coat of white wash complete all as specified and as directed
M&L for preparation of old plastered surfaces of wall and applying one coat of lustre paint complete all as specified and as directed.
Complete removal of existing treatment on wall (any number of layers ) by scarping with steel scapers or any other means including filling depessions of scrapped surface with putty and preparation of surface for further treatment and then applying two coats of Oil bound distemper white or tinted over a coat of primer complete all as specified and as directed
S&F Drapery curtain rod of metalic 20mm dia covered with powder coating complete with MS bracket golden colour rings and side caps fixed in position by drilling holes in walls and fixed the brackets with rawl plug and steel screw complete all as specified as directed
Supply and fixing in repairs Door closer hydraulically regulated designation No-2 universal type ISI marked suitable for door shutter of weight between 36 to 60 kg, cast iron body complete all as specified and as directed. Make : Heera/Ashokas/Universal
Demolition of Brickwork or stone / block masonry, built in cement mortar dressed stonework and precast concrete articles complete all as specified and as directed
Dismantling wall, ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs any thickness, including cover fillets complete all as specified and as directed.
M&L position suspended false ceiling system using T-grid suspended ceiling grid system. The size of grid shall be 600x600mm, with GI frame work main runner 38 x 24 x 3600mm, cross 'T' 25 x 24 x 60mm/25 x 24 x 1200mm and wall angle 24 x 24 x 2540mm (thickness of the material of 0.30mm ), using 9mm thick ceiling panel laminated with PVC film on front face and foil back available in due drop texture as per IS-2095, part-I-1996, fixed in the grid of T-grid suspended ceiling grid system duly suspended by 4mm dia GI bar hanger from the purlins of the roof with butterfly clips complete all as specified and as directed. Make:-Gyproc/Armstrong.
M&L for 18 mm thick superior quality chemically treated, edge glued, finger jointed rubber wood panels fixed by secret nailing as in cup boards, panelling, shelves, lining etc including grid work 60 cm x 60 cm with using 2nd class hardwood wooden fillets of size 50 mm x 38 mm fixed to wall through screws / nails and finished with two coats of Melamine polish over one coat of natural colour wood filler putty etc. including applying sand paper and finishing to a glossy finish complete all as specified and as directed
Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed
M&L pre-laminated particle board,18/19 mm thick exterior, grade, prelminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to Aluminium frame work complete all as specified and as directed
M & L 12 mm Pre-laminated particle board, exterior grade, prelaminated both side with decoeative choice lamination & other sidebalancing white lamination, fixed with instruction (Make as approved by GE) complete all as specified and as directed
S & F 4 mm thick sheet glass, ordinary quality and glazing with oil putty/rubber beading in square exc 0.5 Sq.m in each pane in any height complete all as specified and as directed
S & F 40 mm dia polished hardwood cupboard knobs fixed with nuts, screws and washer of brass polished complete all as specified and as directed
S & F contionous hinges MS bright finish or electro galvinised with of flaps 30mm complete all as specified and as directed
S&F Ball catches with 8mm dia steel ball, and brass body and striking plate including letting in and fixed complete all as specified and as directed
M&L for complete removal of existing finish /treatment on walls, preparing surface and make surface free from loose particles oil stains etc and surface and applying two coats of cement based paint on wall, complete all as specified and as directed.
Supply and fix for rolled mild steel roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. conforming Fe 410-W(Gde-E-250) quality -B complete all as specified and as directed.
Supply and fix for 0.50mm thick pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet of any colour having tensile strength of 550 Mpa as in roof covering fixed with self tapping screws with two corrugation side lap complete all as specified and as directed.
Supply and fix for 0.50mm thick pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of any colour, having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and as directed.
S&F Stainless steel hand rail of grade 304 with round tube of 50mm dia with two tier rails, baluster of 25.4mm dia mirror polished and flush joints incl end caps fitted in steps complete all as specified and as directed
S&F in repairs aluminium powder coated fancy type decorative brackets suitable for 25 mm dia curtain rod (minimum projection from wall 75 mm ) fixed to wall including drilling, rawl plug, screws etc complete all as specified and as directed.
S&F mild steel framed work such as grills, gratings, etc with end of bars shouldered and / or riveted or forged into spike framed guard bars, barred iron doors and similar work conforming to Fe 410-0 or Fe 310-O complete all as specified and as directed
M&L for preparation of new steel or iron surfaces of any description over 10cm width or girth not otherwise described and applying two coats of synthetic enamel paint over a coat of zinc chrome red oxide primer all as specified and as directed.
M&L for machine pressed precast cement concrete coloured interlocking tiles, paver block, any shape and size as approved, 60mm thick, conforming to IS 15658-2006, M-35 grade in floor/ pavement laid over and including 30mm thick sand cushioning laid dry to the profile including vibrating with surface vibrator after laying of tiles complete incl dismantling old blocks all as specified and as directed. NOTE : (i) Manufacturers test certificate for crushing strength and Water absorption shall be submitted alongwith sample.
S&F 15mm bore tubes medium grade galvanized ISI marked with all fittings short pieces and fixed complete to walls, floor, ceiling etccomplete all as specified and as directed
S&F 20 mm bore GI tubing 'medium grade' galvanised, with all fittings and fixed complete to walls and ceiling or laid in floors all as specified and as directed.
S&F in repairs Vitreous China wash down water closet pan (pedestel pattern) ETWC white, including trap connection to drain (outgoing pipe) and to flushing pipe, antisyphonage pipe, PVC jet for Pedestal pattern pan including 450/600mm long PVC connection and plastic water closet seat of white in colour, back closed pattern with flat bottom and cover and mild steel chromium plated or aluminised hinging device etc complete all as specified and as directed. Make : Cera/Prayag/Johnson Pedder.
S&F in repair 10 ltr capacity PVC valveless syphonic action type flushing cistern low level white with inlet ball valve float ovel handle including brackets and PVC flushing pipe of polyethylene of low or high density or PVC 32mm dia complete all as specified and as directed. Make : Cera/Prayag/Johnson Pedder.
M&L PVC connection 15mm size with PTMT nuts of length 600mm complete all as specified and as directed
M&L mild steel TMT bars10 mm dia,and over cut to length, bent to shape required, including cranking, bending spirally for hooping for columns,hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia. or securing with clips complete all as specified and as directed
M & L for point wiring complete with and including single core PVC FRLS insulated unsheathed flexible bright annealed multistaranded copper conductor cables 1.5 Sqmm (22/0.30mm) 1100 Volts grade drawn through and including heavy grade PVC rigid conduits 20mm or higher dia as reqd at site totally concealed in walls / floors/ ceilings including all conduit accessories / fittings/junction boxes/ inspection covers etc of heavy grade, ISI marked and sunken terminal boxes of factory made 16 SWG pressed steel housing , totally concealed in walls covered with modular white colour cover plate with inner frame suitable to modular switch and sockets, fan regulators etc. including 1.5 Sqmm (22/0.30m) 1100 Volt grade FRLS, PVC insulated, unsheathed flexible multi stranded copper conductor cable as continuous earth wire connected to metallic bodies of luminaires/ fans etc. at one end and to common earth dolly at other end all as specified , directed and shown on drgs, for:- (a) One light point / wall fan point controlled by one, one way switch 6 Amps
(b) One bell point controlled by one, bell switch 6 Amps
(c) One 3 point 5 Amps switch socket outlet point controlled by one switch on same board
(d) One light point controlled by controlled by one, one way switch 6 Amps with additional two light points on the same switch circuit complete all as specified and as directed
(e) One light point controlled by controlled by one, one way switch 6 Amps with additional three light points on the same switch circuit complete all as specified and as directed
Description all as per 1 here-in before but using PVC conduit only for ceiling portion in false cealing for one light point controlled by one, one way switch 6 Amps with additional four light points on the same switch circuit complete all as specified and as directed
Description all as per 1 here-in before but using 2.5 Sqmm single core copper conductor FRLSH cable of multistranded PVC insulated unsheathed 1100 Volts grade for one 5 /15 amps socket socket combination point including necessary running of 2.5 Sqmm PVC insulated multistranded copper conductor single core FRLSH cable as earth continuity conductor along with wiring and connecting to common earth dolly
M & L for point wiring complete complete with and including single core PVC FRLS insulated unsheathed flexible bright annealed multistaranded copper conductor cables 1.5 Sqmm (22/0.30mm) 1100 Volts grade drawn through and including heavy grade PVC rigid conduits 20mm or higher dia as reqd at site totally concealed in walls / floors/ ceilings including all conduit accessories / fittings/junction boxes/ inspection covers etc of heavy grade, ISI marked and PVC terminal boxes, mounted surface on walls covered with modular white colour cover plate with inner frame suitable to modular switch and sockets, fan regulators etc. including 1.5 Sqmm (22/0.30m) 1100 Volt grade FRLS, PVC insulated, unsheathed flexible multi stranded copper conductor cable as continuous earth wire connected to metallic bodies of luminaires/ fans etc. at one end and to common earth dolly at other end all as specified , directed and shown on drgs, for:- (a) One bell point controlled by one, bell switch 6 Amps
Description all as per 4 here-in before but using 2.5 Sqmm single core copper conductor FRLSH cable of multistranded PVC insulated unsheathed 1100 Volts grade for one 5 /15 amps socket socket combination point including necessary running of 2.5 Sqmm PVC insulated multistranded copper conductor single core FRLSH cable as earth continuity conductor along with wiring and connecting to common earth dolly
S & F Modular switch piano flush type, single pole , one way, and 5/ 6 Amps, single module complete all as specified and as directed.
S & F Modular switch bell push piano flush type ,single module complete all as specified and as directed.
S & F Modular switch piano flush type, single pole , one way, and 15/16 Amps, single module complete all as specified and as directed.
S & F Modular socket outlet multipurpose, having provision for 3 pin 5/6 Amp, 2 module piano flush type, complete all as specified and as directed.
S & F Modular socket outlet multipurpose, having provision for 3 pin 15/16 Amp, and 3 pin, 5/6 Amp, 2 module piano flush type, complete all as specified and as directed.
S & F Electronic Ding Dong type suitable for operation on AC. 230 volts, 50 Hz AC supply complete all as specified and as directed.
S & F Lamp holder, (Angle/ bracket) insulated body, with back plate for batten fittings complete all as specified and as directed
S & F LED Lamps 05 Watt in holder complete all as specifiedand as directed
Supply and fixing LED track mounted, moveable base , round focus light 30 W , fully adjustable beam Angle 40º Aluminium casing ( including driver casing) complete all as specified and as directed Make Jaquar Cat No LTRLB1R030XW or equivalent in Bajaj or Philips
Supply and fixing recess mounted , COB based LED down light 30 watt with anodized reflector complete all as specified and as directed Make Jaquar Cat No LERS04R030XN or equivalent in Bajaj or Philips
Supply and fixing wall mounted die cast aluminium housing light fitting 10x0.5 W , transparent tempered anti glare diffuser with IP 54 complete all as specified and as directed Make Jaquar Cat No LFLT01S105XW or equivalent in Bajaj or Philips
Supply and fixing wall mounted fan, 400 mm sweep, 3 blade, single phase, 3 No speed set, 1320 RPM motor speed, double string and making connections complete all as specified & as directed. Make- Bajaj or equivalent
S & F TPN phase segregated double door vertical type 6 way distribution board 415 volts, 50 Hz With provision for MCCB as incomer and SP / TP MCB's as outgoing with necessary cement work and electrical connections complete all as specified and as directed.
Supply and fixing MCB single pole rated capacity 5 to 32 Amps 240 Volts breaking capacity 10 KA complete all as specified and as directed
Supplied and fixed MCCB 100 Amp, 50 Hz, 415 V with rupturing Breaking Capacity Icu at 415V AC 50Hz 30 (kA) complete all as specified and as directed
Supply and install 7 Watt LED light source, white colour, corded electric and plug smart compatible table lamp with 3 stages brightness adjustment & touch control to switch it on/ off complete all as specified and as directed. Make Syska TL-1007-I or equivalent in bajaj, Philips
M& L for Earthing complete with galvanised steel earth plate electrode 600 x 600 x 6.0 mm thick, buried vertically in ground (Earth pit not less than 2.25 metres deep below normal ground level and top edge of the plate not less than 1.5 m below ground level), connected to and including GI strip 32x6 mm as earthing lead by means of bolts, nuts & checknuts and washers of galvanized iron or steel drawn through GI pipe 40 mm dia medium grade pipe for protection of G.I earth strip, both to be provided to the extent of 7.5 metres, all as shown on electrical plate No 3 of MES SSR-2009 Part-I, other end connected to electrical main switch board (inside the bldg) GI protection pipe buried in ground, laid under floors/plinths or fixed on walls or concealed in walls etc; with provision of mixture of charcoal dust & common salt packed upto minimum 150 mm all around the earth plate , including PCC 1: 2 : 4 type B-1 earth pit with precast RCC cover in CC 1:2:4 type B1 with handle , with G.I 20 mm dia medium grade pipe for watering and M.S funnel with wire mesh for watering arrangement, including necessary excavation and earth work in any type of strata & testing on completion complete all as specified and as directed.
Supply and fixing user friendly , easy to update data through computer, Power 230 Volt , AC 50 Hz, rectangle moving message . Wall mounted hanging type , English language, red colour, Aluminium frame, P10 LED Running/ scrolling programable text message water proof LED info display board WI-FI ( RED,7 INCH X 37 INCH) complete all as specified and as directed.
M & L for submain wiring with approved colour coding as per IS with two single core PVC insulated FRLSH cable with stranded copper conductor of size 4 Sqmm nominal area and drawing into PVC casing and caping and its accessories (ISI marked) of suitable size after chasing in walls etc one run of PVC insulated multistranded copper conductor 2.5 Sqmm (nominal area) single core FRLSH cable as earth continuity conductor along with submain wiring and connecting to earth dolly all as specified and as directed. Note- Two run of 6 Sqmm, one run of 4 Sqmm cable and PVC conduit will be measured as one unit complete all as specified and as directed
M & L for submain wiring with approved colour coding as per IS with two single core PVC insulated FRLSH cable with stranded copper conductor of size 6 Sqmm nominal area and drawing into PVC casing and caping and its accessories (ISI marked) of suitable size after chasing in walls etc one run of PVC insulated multistranded copper conductor 4 Sqmm (nominal area) single core FRLSH cable as earth continuity conductor along with submain wiring and connecting to earth dolly all as specified and as directed. Note- Two run of 6 Sqmm, one run of 4 Sqmm cable and PVC conduit will be measured as one unit complete all as specified and as directed
Supply and install hi wall split units indoor/outdoor complete with cordless remote control unit and with in built air ioniser and Plasma filter for better indoor air quality with minimum 5 star rating and EER 3.2.of capacity 1.5 TR
Supply and fix, installation of 5 KVA voltage stabilizer for automatic operation with copper wound coil, single phase naturally air cooled indoor type wall mounted with electronic time delay relay, designed for input variation between 170 volt to 250 volts with out put voltage at 230 volt with accuracy of + 2.5% suitable for above water cooler complete all as specified and as directed.
Supplied and fixed single pole and neutral sheet metal enclosure suitable for 240 V with a two pin and earth plug and socket plug top complete with one single pole MCB 20 Amps complete all as specified and as directed
Supplied and fixed sheet metal enclosure MCB DB Prewired TPN 4 way vertical type with 200 Amps rated bus bar 415 Volts double door with magnetic locking system including necessary provision for inserting the DBs in wall by cutting the brick/ stone masonary etc and making good of disturbed surface to match the existing colour of wall complete all as specified and as directed
Supply and fixing MCB tripple pole and neutral rated capacity 63 Amps 415 Volts breaking capacity 10 KA complete all as specified and as directed
Supply and fixing MCB single pole rated capacity 5 to 32 Amps 240 Volts breaking capacity 10 KA complete all as specified and as directed
Supply and fixing Multi purpose high quality Air conditioner rust proof powder coated, wall mounting outdoor unit stand consisting of (Bracket - 02 Nos & L Shape-02 Nos) made out of 3mm thick high grade steel including Anchor fastners, with nuts bots and washers complete all as specified and as directed
Supply, installation, commis-sioning of Water cooler fully stainless steel, electric driven single phase having approx storage and nominal cooling capacity 60/120 complete all as specified and as directed
Supply and fix, installation of 3 KVA voltage stabilizer for automatic operation with copper wound coil, single phase naturally air cooled indoor type wall mounted with electronic time delay relay, designed for input variation between 170 volt to 250 volts with out put voltage at 230 volt with accuracy of + 2.5% suitable for above water cooler complete all as specified and as directed.
Unplasticised PVC pipes of pressure rating 10 kgf/cm2 fixed complete to walls, ceilings or infloors etc., any type of pipe sizeof the followings :- (a) 15 mm dia
(b) 32 mm dia
Cutting existing steel tubing for alterations or additions (Each cut measured) 15 mm bore of pipe
Tubes, 'Medium grade' galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors 15 mm bore of pipe complete all as specified and as directed
Supplied and fixed Ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed 15mm bore dia of pipe
Supply & laying LT UG XLPE sheathed PVC insulated, screened PVC bedded, Galvanised Steel Strip of Wire armoured Electric Power Cable heavy duty with stranded Aluminium Conductor 1100 Volt grade, ‘E’ Grade, cross-sectional area 50 Sqmm 3½ Core, laid in trenches/surface of Wall/in GI Pipe along with Pole for connection to OH Lines including Brass Cable Glands Mild Steel Flat Iron Clamps, etc. and Testing complete all as specified and as directed. NOTE : Earthworks, cable protection pipe, etc. will be measured and paid under appropriate Items.
Supply & laying LT UG XLPE sheathed PVC insulated screened, PVC bedded, galvanised steel strip of wire armoured electric power cable heavy duty with stranded aluminium conductor 1100 Volt grade, cross-sectional area 25 Sqmm 4 core, laid in trenches / on surface of wall / along with Pole in and passing through cable protection corrugated pipe & connecting to OH Lines or switch fuse unit and testing, complete all as specified and as directed.
Supply and laying 50 mm outer dia , Low density polyethylene pipes (LDPE) of pressure rating 6 kgf/cm2 fixed laid in trenches with antirodent and non flame propogating properties of approved colour for cable protection, complete all as specified and as directed.
Excavation in Trenches not exc 1.50 Metre wide and not exc 1.50 Metre depth for laying of UG Cable/ foundation of Pole / Stays / Pipe etc getting out in soft loose soil, complete all as specified and as directed.
Returning, Filling in including Spreading, Leveling, Watering and Well ramming in layers not exc. 25 Cm thick in Soils, complete all as specified and as directed.
Removing Surplus soils to a distance not exc 50.00 Metre away and depositing where directed at a level not exc 1.50 Metre above the Starting Point, complete all as specified and as directed.
Supply and fixing as in repairs 24 Watt LED high quality design PC Batten fitting with intregrated electronic driver, connector block, holder, decorative end caps, LED tube light etc complete with all accessories prewired and mounting PVC rectangular block, including provision of flexible copper conductor cable of suitable size from ceiling rose to connector and taking down old unserviceable fitting from existing postion for carrying to store, making good disturbed surfaces complete all as specified and as directed. Make- Jaquar Cat No-LGLZ01X024XW or equivalent
Supply and fixing as in repairs 10 Watt LED High quality aluminium extruded fitting with intregrated electronic driver, connector block, holder, decorative end caps, LED tube light etc complete with all accessories prewired and necessary mounting PVC rectangular block, including provision of flexible copper conductor cable of suitable size from ceiling rose to connector and taking down old unserviceable fitting from existing postion for carrying to store, making good disturbed surfaces complete all as specified and as directed. Make- Jaquar Cat NoLGLZ01X010XW or equivalent
Supply and fixing as in repairs LED Recess-mounted, COB based LED 10 W downlight with anodized reector complete with all accessories prewired and fixing in false ceiling including provision of flexible copper conductor cable of suitable size from ceiling rose to connector and taking down old unserviceable fitting from existing postion for carrying to store, making good disturbed surfaces all as specified and as directed. Make- Jaquar Cat NoLETS01R020XW or equivalent
Supply and fixing LED 24 Watt Unique Slimmest recess com surface panel , solution to provide variable cutout size for installation in recess. with aluminium die cast housing including provision of flexible copper conductor cable of suitable size from ceiling rose to connector and taking down old unserviceable fitting from existing postion for carrying to store, making good disturbed surfaces all as specified and as directed. Make-Havells Cat No LHEAABP7IL1W024 or equivalent
Supply and fix for energy saving new generation environmental friendly long life versatile pressure die aluminium IP-66 for security light fitting luminaire of capacity 30 watt with high power LEDs as light source and electronic driver , necessary mounting arrangements and provision of 1.0 Sqmm 3 core copper conductor cable multistranded from ceiling rose to light fitting including 1.5 metres long GI pipe medium grade bracket of suitable size & shape to light fitting mounting dia, secured and fixed with clamps made out of MS flat iron of size 25mm x 5mm, nuts, bolts etc , as approved, complete all as specified and as directed. Make- Jaquar Cat No LPCRSRT30WXW or equivalent
Note : 1. Performance security:- Refer Condition 22 of Special Conditions. 2. Quoted Contract Sum shall be arrived at after deducting the amount of Credit Schedule (refer Schedule of Credit in pdf form for quantity, rate and amount etc.) for old unserviceable materials retrieved from site.
Gauri Associates
UNIQUE ENGINEERS
M/S Eknath agencies
M/s Akshay Contruction
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .