e TENDER FOR SUPPLY AND INSTALLATION OF 4 inch, 3 inch and 2 inch DIA GI PIPELINE FROM M1 TO LLR BEHIND INDUSTRIAL CANTEEN AND LLR TO OHT AT TERRACE OF CISF BARRACKS AT Ch.PA UNDER TWO COVER SYSTEM

Cost for the supply of G.I.Pipe 4" dia-'C' Class as per IS 1239 (Part-I)

Cost for the supply of M.S.Flange suitable for 4" dia G.I.Pipe with necessary bolts, nuts and washers.

Cost for the supply of M.S. Gate Valve with flange end- 4" dia..

Cost for the supply of G.I.Tee- 4" X 4" X 4" with flange end

Cost for the supply of G.I.Reducer- 4" X 3" with flange end

Cost for the supply of G.I.Elbow- 4" dia. - 'C' Class as per IS 1239

Cost for the supply of G.I.Long Bend- 4" dia. - 'C' Class as per IS 1239

Cost for the supply of G.I.Pipe 3" dia-'C' Class as per IS 1239 (Part-I)

Cost for the supply of M.S.Flange suitable for 3" dia G.I.Pipe with necessary bolts, nuts and washers

Cost for the supply of Gate Valve with flange end- 3" dia.

Cost for the supply of G.I.Tee- 3" X 3" X 3" with flange end

Cost for the supply of G.I.Long Bend- 3" dia. - 'C' Class as per IS 1239

Cost for the supply of G.I.Pipe 2" dia-'C' Class as per IS 1239 (Part-I)

Cost for the supply of G.I. Long Bend 90 degree- 2" dia. - 'C' Class .

Cost for the supply of G.I.TEE- 2" dia.

Cost for the supply of G.I.Coupling- 2" dia.

Cost for the supply of Gate Valve (Gun Metal), size 2" with ISI mark

Cost for the supply of 100 mm (4" dia.) C.I.Foot valve (Ball type) Flange end

Cost for the supply of 100 mm (4" dia.) C.I.Non- return valve (Ball type) Flanged end.

Cost for the supply of 100 mm (4" dia.) C.I.Butterfly valve Body cast iron IS - 210 - EG 260, disc stainless steel CFS, seat Black Nitrile, Pressure Rating PN-10.

Cost for the supply of Indian Insertion Rubber (white) 3mm thick X 3' width

Cost for the supply of RCC Hume pipe 12" dia, length 12m

Charges for the Earthwork of size 1m X 1m X 1m shall be carried out

Charges for the cutting of concrete floor of size 1m X 1m X 1m and refill with concrete mixture

Cost for the supply of centrifugal Mono Block pump set, Power 20HP, Suction 100 mm, Delivery 80 mm, Head 50 Mtrs, Discharge rate 22 lps at 50 Mtrs, sealing Gland packet, Pump Shaft stainless steel, High efficiency energy saving pumps. MAKE: Kirloskar / Crompton/ CRI/ Texmo

Cost for the supply of fully automatic star and delta Starter, 415 Volt, 50Hz with suitable overload protection and single phase preventor with 100 Amps MCCB 4 pole, Earthing system and other suitable accessories and cables

Charges for Installation, testing and commissioning of pump and motor as per Sl.No.25 & 26

Charges for fabrication and installation of complete receiving and delivery Pipelines of size 4", 3" and 2" as per Drawing

Annai Enterprises