PROVISION OF CHAIN LINK FENCING FROM GRADE SEPARATOR GATE TO VIJAY BUILDING GATE AT SMA VARUNAPURI AND AROUND PERIMTER WALL OF INS HANSA

Excavating post holes or similar holes each n exc. 0.5 cum getting out in soft/disintegrated rock including returning filling and removing surplus soft/disintegrated rock to a distance n exc. 50m & making good surface.

M&L Plain Cement Concrete Type C2 1:3:6 (using 40 mm graded stone aggregate) in foundations, filling and mass concrete.

Removing excavated material exc. 250 m but n exc. 500 m and depositing where directed.

S&F posts & struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., & similar work conforming to Fe 290-0 Gde E-165

M&l for TMT round bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire(annealed) not less than 0.9mm dia or securing with clips complete all as specified.

S&F Mild steel bolts purpose n. exc 12mm made with exagonal or square head one end and screwed the other, or screwed both ends; each screwed end to be fitted with washers and one hexagonal or square nut. Exc 30cm long complete all as specified and directed by Engineer-in-charge.

Supplied Chain link MS galvanisd fencing 75 x 75 mm mesh size of 4 mm thick , any size or type completed all as specified and directed by Engineer-in-Charge.

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc.including provission of binding wire completed all as specified and directed by Engineer-in-Charge.

S&F Galvanised. 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed (each line wire to be measured) completed all as specified and directed by Engineer-in-Charge.

S&F of steel galvanised punched type concertina coil 1050mm dia when stretched with 255 nos of clip with weight 15.6Kg/coil and average coverage area is 6.00RM per coil.