SPECIAL REPAIR AGAINST EXISTING PIPELINE FOR CADET TRAINEE OFFRS IN BLDG NO. 1,2,3,4,5,6,7 and 8 AT NCC OTA, KAMPTEE.

Amount

Excavation in trenches in any type of soil, not exceeding 1.5m wide and not exceeding 1.5m in depth for foundation / laying of pipes and getting out soft /loose soil complete all as specified and directed

Returning, filling in any type of soil, including spreading, levelling, watering and well ramming in layers not exceeding 25cm soft /loose soil complete all as specified and directed

Removing excavated material (soils) not exceeding 50m and depositing where directed at a level not exceeding 1.5 m above the starting point. complete all as specified and directed

M&L for cutting of cast iron pipe mains 150 mm bore for insertion of tees, collars, sluice valves, etc including dewatering work required for working water pipe lines complete all as specified and directed.

M&L for cutting of cast iron pipe mains 100 mm bore for insertion of tees, collars, sluice valves, etc including dewatering work required for working water pipe lines complete all as specified and directed.

Taking out unserviceable CI sluice valve, 150 mm bore, double flanged from the existing pipe line by unscrewing nuts, bolts and removing of rubber gasket joints including de-watering work required for working pipe complete, refacing, regrinding and refixing all as specified and directed.

Taking out unserviceable CI sluice valve, 100 mm bore, double flanged from the existing pipe line by unscrewing nuts, bolts and removing of rubber gasket joints including de-watering work required for working pipe complete, refacing, regrinding and refixing all as specified and directed.

Taking out unserviceable CI sluice valve, 80 mm bore, double flanged from the existing pipe line by unscrewing nuts, bolts and removing of rubber gasket joints including de-watering work required for working pipe complete, refacing, regrinding and refixing all as specified and directed.

S&F in replacement of sluice valve, 150 mm bore, flanged and drilled type PN-1.6, ISI marked with CI hand wheel and stainless steel spindleof IS:6603 bronze rings complete with jointing and jointing materials such as bolts, nuts, washers and rubber gaskets complete all as specified and directed.

S&F in replacement of sluice valve, 100mm bore, flanged and drilled type PN-1.6, ISI marked with CI hand wheel and stainless steel spindleof IS:6603 bronze rings complete with jointing and jointing materials such as bolts, nuts, washers and rubber gaskets complete all as specified and directed.

S&F in replacement of sluice valve, 80mm bore, flanged and drilled type PN-1.6, ISI marked with CI hand wheel and stainless steel spindleof IS:6603 bronze rings complete with jointing and jointing materials such as bolts, nuts, washers and rubber gaskets complete all as specified and directed.

Taking up or down GI tubing and fitting, 80 mm bore, from wall/ trenches and disconnecting from main distribution lines including necessary cutting of existing pipe line and threding the same and dewatering work as required and removing from site complete all as specified and directed.

Taking up or down GI tubing and fitting, 50 mm bore, from wall/ trenches and disconnecting from main distribution lines including necessary cutting of existing pipe line and threding the same and dewatering work as required and removing from site complete all as specified and directed.

Taking up or down GI tubing and fitting, 40 mm bore, from wall/ trenches and disconnecting from main distribution lines including necessary cutting of existing pipe line and threding the same and dewatering work as required and removing from site complete all as specified and directed.

Taking up or down GI tubing and fitting, 25 mm bore, from wall/ trenches and disconnecting from main distribution lines including necessary cutting of existing pipe line and threding the same and dewatering work as required and removing from site complete all as specified and directed.

Taking up or down GI tubing and fitting, 20 mm bore, from wall/ trenches and disconnecting from main distribution lines including necessary cutting of existing pipe line and threding the same and dewatering work as required and removing from site complete all as specified and directed.

Taking up or down GI tubing and fitting, 15 mm bore, from wall/ trenches and disconnecting from main distribution lines including necessary cutting of existing pipe line and threding the same and dewatering work as required and removing from site complete all as specified and directed.

Re-laying only in trenches trenches / fixing in wall GI tubing, 80 mm bore, medium grade with all fitting complete all as specified and directed.

Re-laying only in trenches trenches / fixing in wall GI tubing, 50 mm bore, medium grade with all fitting complete all as specified and directed.

Re-laying only in trenches trenches / fixing in wall GI tubing, 40 mm bore, medium grade with all fitting complete all as specified and directed.

Re-laying only in trenches trenches / fixing in wall GI tubing, 25 mm bore, medium grade with all fitting complete all as specified and directed.

Re-laying only in trenches trenches / fixing in wall GI tubing, 20 mm bore, medium grade with all fitting complete all as specified and directed.

Re-laying only in trenches trenches / fixing in wall GI tubing, 15 mm bore, medium grade with all fitting complete all as specified and directed.

Supply and laid in replacement of in trenches GI tubing, 80 mm bore, medium grade with all fitting complete all as specified and directed.

Supply and laid in replacement of in trenches GI tubing, 50 mm bore, medium grade with all fitting complete all as specified and directed.

Supply and laid in replacement of in trenches GI tubing, 40 mm bore, medium grade with all fitting complete all as specified and directed.

Supply and laid in replacement of in trenches GI tubing, 25 mm bore, medium grade with all fitting complete all as specified and directed.

Supply and laid in replacement of in trenches GI tubing, 20 mm bore, medium grade with all fitting complete all as specified and directed.

Supply and laid in replacement of in trenches GI tubing, 15 mm bore, medium grade with all fitting complete all as specified and directed.

Supply and fix in repair gun metal gate valve with iron wheel head, screwed both ends for iron pipe and fixed to 50 mm bore including taking down / removing old unserviceable valve complete all as specified and directed.

Supply and fix in repair gun metal gate valve with iron wheel head, screwed both ends for iron pipe and fixed to 40 mm bore including taking down / removing old unserviceable valve complete all as specified and directed.

Supply and fix in repair gun metal gate valve with iron wheel head, screwed both ends for iron pipe and fixed to 25 mm bore including taking down / removing old unserviceable valve complete all as specified and directed.

Supply and fix in repair gun metal gate valve with iron wheel head, screwed both ends for iron pipe and fixed to 20 mm bore including taking down / removing old unserviceable valve complete all as specified and directed.

Supply and fix in repair gun metal gate valve with iron wheel head, screwed both ends for iron pipe and fixed to 15 mm bore including taking down / removing old unserviceable valve complete all as specified and directed.

Material and labour for DI fitting for spigot & socket end pipes such as bends (any type, radius and angle), tapers any type (straight, bend, increasing, decreasing or double socket etc), Tee pieces single branch, `Y` junction, double branch, cross (all sockets or socket and spigot) collars, caps and plugs and mechanical joints etc upto 150 mm bore including removing/ dismantling of old CI fittings complete all as specified and directed.

Dismantling of valve pit chamber and M&L for Construction of valve pit chamber of size 1200 x 1200 x 1200 mm with 15 Cm thick PCC foundation 1 : 4 : 8 type D2 ( using 40 mm graded stone aggregate) and 15 cm thick hard core 20cm PCC solid block grade D - 5 masonary work built in CM (1:6) 15 mm thick internal & external plastering in CM (1:4), MS sheet cover 6 mm thick including 50 x 50 x 5 mm MS angle frame fixed in coping of PCC 1 : 2:4 type B-1 ( using 20 mm stone aggregate) making hole in valve chamber cover as per sluice valve location in side the valve chamber for insurtion of MS rod of 12 mm dia of 1.5m long along with valve spindle cap properly welded to ms rod with locking arrangement & painting with one coat of red oxide & two coats of black bituminous paint & all as specified & directed including removing of extra soil from site for the following sizes complete all specified and directed.

Dismantling of valve pit chamber and M&L for Construction of valve pit chamber of size 600 x 600 x 600 mm with 15 Cm thick PCC foundation 1 : 4 : 8 type D2 ( using 40 mm graded stone aggregate) and 15 cm thick hard core 20cm PCC solid block grade D - 5 masonary work built in CM (1:6) 15 mm thick internal & external plastering in CM (1:4), MS sheet cover 6 mm thick including 50 x 50 x 5 mm MS angle frame fixed in coping of PCC 1 : 2:4 type B-1 ( using 20 mm stone aggregate) making hole in valve chamber cover as per sluice valve location in side the valve chamber for insurtion of MS rod of 12 mm dia of 1.5m long along with valve spindle cap properly welded to ms rod with locking arrangement & painting with one coat of red oxide & two coats of black bituminous paint & all as specified & directed including removing of extra soil from site for the following sizes complete all specified and directed.

NOTE:- SCHEDULE OF CREDIT (Amount shall be deducted offline from the total quoted amount to workout the net contract sum to be considered for acceptance.) [(-) Rs. 13,108.00]

chronicle enterprises (BID ID -3111196)

Paragon Electrotechnics (BID ID -3109381)