Loading
Loading…
Loading…
Tender Value
₹49.9 L
EMD Value
₹99,800
Closing Date
31 Aug 2026, 6:00 pm7d left
Vipin Chandra Rai, IDSE
GE UTILITY BATHINDA
REPAIR /MAINT OF B/R WORKS OF WATER SUPPLY INSTALLATION UNDER GE (U) BATHINDA AT BATHINDA MIL STN
2026_MES_783274_1
8969/2026-27/E8
Open Tender
Miscellaneous Works
Item Rate
180 days
Garrison Engineer Utility Bathinda
as per NIT
9 documents required · 9 mandatory
₹500
Garrison Engineer Utility Bathinda
₹99,800
Yes
7 Aug 2026
7 Aug 2026
2 Sept 2026
7 Aug 2026
31 Aug 2026
22 Aug 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Demolition of brick work or stone/ boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars etc but excluding ashlar facing dressed stone work and precast concrete articles complete all as specified and directed | 3 | Cum | - | - |
| 2 | M&L for Brick work with subclass ‘B’ old size fly ash bricks, straight or curved on plan exc 6m mean radius built in cement mortar (1:6) complete all as specified and directed by Engineer-in-Charge. | 3 | Cum | - | - |
| 3 | Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided complete all as specified and directed by Engineer-in-Charge. | 1.5 | Cum | - | - |
| 4 | M&L for Reinforced cement concrete 1:2:4 type B-1 using 20mm graded stone aggregate as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies deck slabs, and in shelves and the like complete all as specified and directed by Engineer-in-Charge. | 1.5 | Cum | - | - |
| 5 | Use & waste of Form work to soffits of suspended slabs such as roof slabs, floor slabs, landing horizontal or slopping similar work not. Exc 200mm thick and flat rough finished surfaces complete all as specified and directed by Engineer-in-Charge | 6 | Sqm | - | - |
| 6 | Mild steel TMT bars 10 mm dia and over cut to length, bent to shapes required, including cranking, bending spirally for coping for columns, hooking ends and binding or welding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed by Engineer-in-Charge | 300 | Kg | - | - |
| 7 | Hacking out old broken glass (any thickness, size, quality or description) from metal frames including punching or drilling out old glazing pins/spring clips and providing and fixing 3 mm thick ordinary sheet glass and glazing with oil putty not exc. 0.50 sqm in each pane complete all as specified and as directed by Engineer-in-Charge. | 140 | Sqm | - | - |
| 8 | S&F in repair galvanized mild steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanized wire staples complete all as specified and directed by Engineer-in-Charge | 10 | Sqm | - | - |
| 9 | Taking down Chowkats or frames with shutters (without taking off shutters from the frame) not exc 1.5sqm each and removing from site complete all as specified and directed by Engineer-in-Charge. | 5 | Each | - | - |
| 10 | S&F solid PVC door frame of size 50mm x 47mm made out 5mm thick PVC sheet prelaminated on single side and plain on other side reinforced with MS square tube including painting of edges to match with prelaminated sheet, fixed in opening as per specification stipulated in SSR Part-I (2009) complete all as directed by Engineer-in-Charge | 23.5 | RM | - | - |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 2.18 MB
8969t.pdf
Tender Documents • 1.47 MB
BOQ_877587.xls
BOQ • 0.63 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at [email protected].