REPAIR AND MAINTENANCE OF LT DISTRIBUTION PANEL,MAIN FEEDER PILLAR,UG CABLE ETC, DISMANTLING AND ERRECTION OF LT OVER HEAD LINE AT BSF CAMPUS HUMHAMA UNDER FTR HQ BSF KASHMIR

Amount

Supplying of channel iron 75 mm X 40 mm X 6 mm (7.14 kg per metre) cross arm for 4 wire over head line complete with clamps,bolts, nuts and washer etc including drilling of holes for insulator pins etc (as per drawing) and painting with primer and finished paint as required .

Supplying and erection of galvanised 'D' iron clamps complete with shackle insulator (100 mm X 110 mm), G.I. bolts, nuts and washers, coach screws etc. as required.

Supplying and erection of 100 mm X 110 mm shackle insulator with G. I. Bolt, nuts and straps etc. as required .

Erection of Rabbit ACSR condcutor(6/3.35+1/3.35),(214 kg/Km) including binding etc compete as required.

Supplying and erection of stay set complete (galvanised) with 19/20 mm dia X 1.8 metres long stay rod, anchor plate of size45 cm X 45 cm X 7.5 mm, thimble, stay clamps, turn buckle ( 20 mm X 60 cm ), 7/ 4.00 mm dia G.I. stay wire and strain insulator etc in cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size ) foundation including excavation and refilling etc. as required.

Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.(i) 3½ X 70 sq. mm (38mm)

Supplying and fixing of light class G.I. pipe of 50 mm dia. (nominal) 3 meter length along the pole for protection of under ground cable as required.

Earthing with G.I. earth pipe 4.5 metre long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc.with charcoal/ coke and salt as required.

Providing and laying earth connection from earth electrode with 6 SWG dia G.I. Wire in 15 mm dia G.I. pipe from earth electrode including connection with G.I. thimble excavation and re-filling etc as required.

Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing as required

Supplying and fixing of 32 mm dia X 2.00 metres long G.I. pipe (medium class) bracket for mounting of fluorescent / HPMV / HPSV street light fitting on pole including bending the pipe to the required shape, 2 nos 40 mm X 3 mm flat iron clamps with nuts,bolts and washer, painting the flat iron with primer and finish paint etc. as required.

Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 kV grade as required i).2 X 25 sq. mm (22mm)

ii) 3½ X 35 sq. mm (32mm)

iii) 3½ X 70 sq. mm (38mm)

iv)3½ X 120 sq. mm (45mm)

Supplying & laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 kV grade of following size in the existing excavation, sand cushioning, protective covering and refilling the trench etc. as required.(ISI marked Make Havells /Polycab/ Finolex /CCI /KEI /RR Kabel)req.(Havells/Gloster/Laser/Finolax make)(i) 2 X 25 sq. mm

ii) 3½ X 35 sq. mm

ii) 3½ X 70 sq. mm

iii)3½ X 120 sq. mm

Painting of of steel tubular pole hight 10 mtr steel pole including pole bracket, angle frame in installed position with two or more coat of synthetic enameled paint to give an even shade,over an under coat of oxide zinc chromate primer of approved braand manufactrure including scrafing and cleaning the surface etc as required.Approved make primer :Asian/Burger/Shilimer and Paint Make Asian/Apcolite.

SITC of steel tubular pole(swaged type 10 mtr long 410 SP 40 weight 128 kg approx as per specification duly welded with steel anchor base plate size 300mmx300mmx60mm thick) strut in cemnet concrete 1:3:6 (1 cement:3 coarse sand :6 graded stone aggregate 40 mm nominal size) foundation including excavation and refilling and secured with holding clamps,bolts,nut,etc as required. this steel tubular pole shoudl confirm following specification.i) Length of section (a) Bottem,mid & top = 5.20m+2.40m+2.40m,ii) Outside diameter and thickness of section,(a) bottem,mid & Top = 139.7x 4.50 mm+ 114.3x4.50mm+ 88.9x 3.25mm.

Supplying of Rabbit ACSR condcutor(6/3.35+1/3.35),(214 kg/Km) including binding etc compete as required.

P/I/T/C of 70W IP66 protection street lights LED Luminiers Energy saving and environmental friendly long life LED street light made up of pressure die cast aluminium housing with acrylic cover as diffuser with including wiring with 3 x 1.0 sq mm FRLS PVC insulated copper conductor cable etc as required.make Havells/ Bajaj/ Phillips.

Providing and fixing four pole MCCB 125 Amp 35 KA , thermal & Fix maganetic100 % of Icu 220V, with thermal magnetic release in existing cubical panel board including drilling holes in cubical panel with suitable lock nut and washer with spreader terminals making connections etc as required.(Make- Havells,L&T,C&S).

Providing and fixing four pole MCCB 80 Amp 35 KA , thermal & Fix maganetic100 % of Icu 220V, with thermal magnetic release in existing cubical panel board including drilling holes in cubical panel with suitable lock nut and washer with spreader terminals making connections etc as required.(Make- Havells,L&T,C&S).

Providing and fixing four pole MCCB 250 Amp 35 KA , thermal & Fix maganetic100 % of Icu 220V, with thermal magnetic release in existing cubical panel board including drilling holes in cubical panel with suitable lock nut and washer with spreader terminals making connections etc as required.(Make- Havells,L&T,C&S).

SITC of cubical cvanopy type out door inspection/din type joint box having size 600 mm (H) X 450 mm (W ) X 400 mm (D) fabricated with MS sheet 2 mm thick mounted on 04 Nos 35 mm X 35 mm x 5 mm thick having angle iron frame, erected in cement 1:3:6 ( 1 cement: 3 corse sand : 6 graded stone aggregate 40 mm nominal size) foundation including exvation and refilling, painting with primer and finish paint as required and consisting of following accessories. a) 04 Nos Aluminium bus-bar strip suitable for 200A,415 Volt, current capacity with suitable insulated support for Al. Bus Bar.

M.L. ELECTRICAL AND MECHANICAL WORK