REPAIR REPLACEMENT OF ELECTRIC WIRING INCL FITTINGS FIXTURES AT SMQ TMQ OMQ OTM REPAIR OF SOLAR WATER HEATER SOLAR LIGHTS CEILING FANS EXHAUST FANS GEYSERS FIRE ALARM SYSTEM INCL CONNECTED ITEMS AT SMQ AT AF STN CHANDINAGAR

Amount

Taking down Geyser of any size and capacity after disconnecting all electrical and water connections, dismantling of geyser for checking of unserviceable parts, repair/replacement of worn out parts, reassembling, testing, cleanig with chemical to clear choking due to scaling and refixing in its original location incl making all necessary electrical & water connections complete all as specified and directed by Engineer-in-Charge. (Note: Parts will be measured separately and paid for under ‘Supplied only’ rates here-in-after)

Supply only Heating Element 1500 W complete all as specified and directed by Engineer-in-Charge.

Supply only Thermostat 45˚C to 100˚C complete all as specified and directed by Engineer-in-Charge.

Supply only 15A plug top complete all as specified and directed by Engineer-in-Charge.

Supply only Inlet/Outlet PVC connection set complete all as specified and directed by Engineer-in-Charge.

Supply only Geyser apparatus plate for 25 ltrs complete all as specified and directed by Engineer-in-Charge.

Brazing of steel tank after taking out the steel tank from outer body complete all as specified and directed by Engineer-in-Charge.

Grouting of nuts and bolts for fixing of geyser incl nuts, bolts & washers, cement work complete all as specified and directed by Engineer-in-Charge.

M&L for rewinding the following fans using super enameled copper conductor of suitable gauge including insulation varnishing, packing including taking down and refixing the fans in original position complete all as specified and directed by Engineer-in-Charge. (Note: Other unserviceable / worn out components will be measured and paid separately here-in-after) Ceiling fan any sweep complete all as specified and directed by Engineer-in-Charge.

Exhaust fan 300 to 450 mm sweep complete all as specified and directed by Engineer-in-Charge.

Exhaust fan 450 to 600 mm sweep complete all as specified and directed by Engineer-in-Charge.

Air circulator of any sweep complete all as specified and directed by Engineer-in-Charge.

Wall Mounted fan of any sweep complete all as specified and directed by Engineer-in-Charge.

S&F in replacement ball bearing suitable for Ceiling fan of any sweep complete all as specified and directed by Engineer-in-Charge.

S&F in replacement ball bearing suitable forfor Exhaust fan of any sweep complete all as specified and directed by Engineer-in-Charge.

S&F in replacement ball bearing suitable for Air circular/wall fan of any sweep complete all as specified and directed by Engineer-in-Charge.

S&F in replacement Shackle & clamps including rubber bush, bolts, nuts & split pin etc. complete suitable for ceiling fan complete all as specified and directed by Engineer-in-Charge.

S&F in replacement capacitors of 3.15 Mfd complete all as specified and directed by Engineer-in-Charge.

S&F in replacement capacitors of 4 Mfd complete all as specified and directed by Engineer-in-Charge.

S&F in replacement brass bush suitable for ceiling fan of any sweep complete all as specified and directed by Engineer-in-Charge.

S&F in replacement brass bush suitable for exhaust fan of any sweep complete all as specified and directed by Engineer-in-Charge.

S&F in replacement brass bush suitable for air circular /Pedestal fan of any sweep complete all as specified and directed by Engineer-in-Charge.

S&F in replacement brass bush suitable for wall Mounted fan of any sweep complete all as specified and directed by Engineer-in-Charge.

S&F in replacement PVC insulated twin twisted copper flexible wire of size 24/0.2mm including necessary connections complete all as specified and directed by Engineer-in-Charge.

S&F in replacement analouge addresseble type smoke detector based on scattered light & response LED shall be visible from 360 deg blinking LED in normal operation with soft addressing with base with self built intelligence as per IS:11360 complete all as specified and directed by Engineer-in-Charge.

S&F in replacement Addresseble manual call point resetablle type complete all as specified and directed by Engineer-in-Charge.

S&F in replacment addresseble electronic sounder cum strobe complete all as specified and directed by Engineer-in-Charge.

S&F cable copper conductor PVC insulated FRLS 2 core 1.5 Sqmm in existing MS conduit including taking out old u/s complete all as specified and directed by Engineer-in-Charge.

Taking down carefully aluminium point wiring light, fan socket or power complete fitting such as switches, ceiling rose, fan regulator, socket including light fitting etc complete with conduit and T/W battern all as specified and as directed by Engineer-in-Charge.

M&L for point wiring with single core PVC insulated unsheathed 1100 volt grade cable with stranded copper conductor of size 1.5 Sq mm (Nominal area) drawn through and including non metallic rigid PVC conduit medium duty ISI marked not less than 25mm dia, fixed on wall, ceiling with GI saddles GI screws, rawal plugs (concealed conduit wiring) with all fittings including Tee, junction boxes and provision of pressed steel terminal box of suitable size with 3 mm thick plastic laminated sheet cover for mounting switch sockets and regulators and drawing continuous earth wire with and including PVC insulated unsheathed 1100 volts grade cable with stranded coper conductor of size 1.5 Sq mm (Nominal area) complete all as specified and directed by Engineer-in-Charge for following (Color coding to be followed):- One light point controlled by one switch.

One fan point controlled by one switch complete all as specified and directed by Engineer-in-Charge

One 3 pin 5 Amps socket outlet independent with cables 1.5 sqmm size complete all as specified and directed by Engineer-in-Charge

One bell/buzzer point controlled by one bell push complete all as specified and directed by Engineer-in-Charge

All same as per item No 25.01 above but with conductor of size 2.5 Sq mm (nominal area) for one 3 pin socket outlet 15 Amps on independent board complete and earth continuity wire with 1.5 Sq mm PVC insulated stranded copper conductor cable complete all as specified and directed by Engineer-in-Charge. Note : For item Sl No 25 & 26 wiring circuit in PVC concealed conduit ot be taken from main DB only.

M&L for switch piano type 5 Amps, single pole one way complete all as specified and directed by Engineer-in-Charge.

M&L for switch piano, flush type 15 Amps single pole one way complete all as specified and directed by Engineer-in-Charge.

M&L for socket outlet 2 in 1, 3 pin, 5 and 15 Amps Flush type complete all as specified and directed by Engineer-in-Charge.

M&L for socket outlet 3 pin , 5 Amps flush type complete all as specified and directed by Engineer-in-Charge.

S&F call bell ding dong type 230 volt single phase complete set inclusive suitable size wire from ceiling rose to calling bell as directed by Engr - in -Charge.

S&F bell push flush type switch complete all as specified and directed by Engineer-In-Charge

S&F stepped type electronic fan regulator flush type complete all as specified and directed by Engineer-in-Charge.

M&L for switch 6 amps modular type one one waycomplete all as specified and directed by Engineer-in-Charge.

M&L for switch 16 amps modular type one one way complete all as specified and directed by Engineer-in-Charge.

M&L for modular type fan regulator (Step type) , 120 W-2 module complete all as specified and directed by Engineer-in-Charge.

Supply and fixing modular socket 6Amps 2/3 pin combined 2 module complete all as specified and directed by Engineer-in-Charge.

Supply & Fixing modular Socket 6A/16A 2/3 Pin combined 2 module complete all as specified and directed by Engineer-in-Charge.

Supply and fixing white cover plate with frame 3 module complete all as specified and directed by Engineer-in-Charge.

S&F Metal flush box 3 Module for fan regulator with switch etc complete all as specified and directed by Engineer-in-Charge.

S&F White cover plate 4 module with frame complete all as specified and directed by Engineer-in-Charge.

S&F Metal Flush Box 4 Module complete all as specified and directed by Engineer-in-Charge.

S&F single pole and neutral sheet metal enclosure with a two pin and earth plug and socket complete with plug top 20 amps with MCB SP 230 Volt 20 Amps complete all as specified and directed by Engineer-in-Charge.

S&F TPN vertical distribution board 8 way IP 42 Double door (Power Shell) steel sheet Phosphatised powder coated with Din rail removable busbar shrouded neutral link with conditonal short circuit rating of 10 KA rating complete all as specified and directed by Engineer-in-Charge. Make Crabtree Xpro Cat pt no DCDKTHODCW08 Eqiv in Havells/Standard/Schnider

S&F SPN MCB distribution board 8 Way IP 42 Double door (Power shell) steel sheet Phosphatised powder coated with Din rail removable busbar shrouded neutral link with conditonal short circuit rating of 5 KA complete all as specified and directed by Engineer-in-Charge. Make Standard Cat pt no DSDPSHODIW08 or Eqiv in Havells /Standard /Schnider

S&F fixing MCB TPN 63 A C Series Amps complete all as specified and directed by Engineer-in-Charge. MAKE Standard CAT PT NODSMSCTNF063

S&F MCB SPN 40 AC Series Amps complete all as specified and directed by Engineer-in-Charge. Make: Standard CAT PT NO DSMSCSNF040

S&F MCB SP 6- 32 A B series Amps complete all as specified and directed by Engineer-in-Charge. Make Standard Cat pt no DSMSBSPF006-032

M&L for sub main wiring with 2x6 sqmm and 1x4.0 sqmm as earth wire PVC FRLS insulated stranded copper conductor including non metallic rigid PVC conduit medium duty ISI marked not less than 20mm dia, fixed on wall, ceiling with GI saddles GI screws, rawal plugs (concealed conduit wiring) with all fittings incl taking down unservicable wiring and making good the disturbed surface complete all as specified and directed by Engineer-in-Charge.

M&L for sub main wiring with 2x4 sqmm and 1x2.5 sqmm as earth wire PVC insulated stranded copper conductor including non metallic rigid PVC conduit medium duty ISI marked not less than 20mm dia, fixed on wall, ceiling with GI saddles GI screws, rawal plugs (concelead conduit wiring) with all fittings incl taking down old unservicable wiring and making good the disturbed surface complete all as specified and directed by Engineer-in-Charge.

S&F for ceiling rose surface bakelite 65 x 50 mm two to three terminals complete all as specified and directed by Engineer-in-Charge.

S&F in replacement Edgelit LED slim panel having powder coated extruded Aluminium body with high quality LGP and PMMA diffuser swparate HPF driver suitbale for Armstrong and grid cei000 K , 40 Watt including connecting up with twin core twisted flexible copper cable with suitable size complete all as specified and directed by Engineer-in-Charge. MakePolycab Cat pat no PCGLP 2x2 40 60 or equiv in Havells/Halonix

S&F in replacement LED post top fitting, power coated aluminium die cast & spun aluminium wuth clear/opal diffuser 5700K IP65, 40 Watt including connecting up with twin core twisted flexible copper cable with suitable size complete all as specified and directed by Engineer-in-Charge. Make: Polycab Cat pat no PCGLPT 01 40 C or equiv in Havells/Halonix

S&F in replacement LEd bay light made of pressure die aluminium housing, extruded aluminium heat sink & enclosed with toughened glass IP66, 120 Watt including connecting up with twin core twisted flexible copper cable with suitable size complete all as specified and directed by Engineer-in-Charge. Make Halonix Cat pat no HLBL-ML04-120-CWL or equiv in Havells/Polycab

S&F in replacement LED focus grey powder coated PDC Aluminium body with toughned glass visor CCT 3000 K, 18 Watt including connecting up with twin core twisted flexible copper cable with suitable size complete all as specified and directed by Engineer-in-Charge. Make Polycab Cat pat no PCGLFS 18 or equiv in Havells/Halonix

S&F in replacement Single phase Electronic energy meter with KWH meter LCD display 5-30 Amps, 240 Volts, 50 Hz, compelte incl connections incl meter box UV stablised transpatent polycarbonate/Flame retardant with hing type locking arrangement complete all as specified and directed by Engineer-in-Charge..

S&F in replacement LED based bollard with aluminium extruded housing with glare free opal diffuser IP65, 15 Watt including connecting up with twin core twisted flexible copper cable with suitable size complete all as specified and directed by Engineer-in-Charge. Make Halonix Cat pat no HLOB-02-15-CW or equiv in Havells/Polycab

Taking down old U/S solar water heater of 500 LPD capacity incl dismantling and removal from staging of tank cold water tank and taking down all connections hot and cold water pipe line connections and electric supply connections and removal of all items from roof top for carrying out repair and servicing all as specified and as directed by Engr in charge.

Supply and Install SS Water Tank of Capacity 500 Ltrs double wall insulated with PUF Insulation machine injected inner shell SS 316 and Outer Shell SS 304 Stucco Aluminium alloy coated coloured steel complete on roof tops at aheight of 7 ft incl connection of inlet and outlet water connections complete all as specified and as directed by Engr in Charge. Make Neropure /Nectar cat pt no CYL/750/04/SS

M&L for taking down old worn out and u/s GI pipe with aluminum cladding complete of size 20mm and 25mm bore all as specified and as directed by Engr in charge.

M&L for hot water pipe duly insulated with glass wool and aluminium cladding 20 mm bore complete all as specified and as directed by Engr in Charge

M&L for hot water pipe duly insulated with glass wool and aluminium cladding 25 mm bore complete all as specified and as directed by Engineer in Charge.

M&L for taking down old u/s gunmetal gate valve of size 20 mm and 25 mm complete for replacemnt all as specified and as directed by Engr in Charge.

M&L for replacement of Gunmetal gate valve with iron wheel head screwed both ends for iron pipe and fixed 25 mm dia all as specified and as directed by Engr in charge.

M&L for replacement of Gunmetal gate valve with iron wheel head screwed both ends for iron pipe and fixed 20mm dia all as specified and as directed by Engr in charge.

M&L for replacement of unservicable parts of solar water heater complete with servicable parts and making it servicable complete testing and commsioning and brazing of tanks for arrresting leakages all as specified and as directed by Engr in Charge.Note : parts will be measured hereafter as supply only.

Supply and fixing only following items for solar water heater 500 LPD all as specified and as directed by Engr in charge. (a) Absorber Plate made of copper sheet, laser or ultrasonically welded to copper tubes with FlangesL-1860 W-1240 H-100, weight 36 kg working pressure 80 KPA .

(b) Aluminum anodized aluminum extrusion casing made of solid construction in a natural % off white

(c) single pane 3.2 mm tempered low iron glass collector.

(d) 50 mm Insulation resin bonded rock wool & aluminum foil.48 kg/m sq

(e) Back plate of collector

(f) Heat exchanger for 500 Liter Hot water tank

(g) Makeup Tank for heat exchanger of 5 Liter with ball cock.

(h) Heating element 3 KW with thermostat for electrical Back up

M&L MS Framed brackets of angles or tees with and flages cut to shape, drilled and countersunk for screw, including bending and welding angles, as necessary, gusset plates,riceting, etc. n exc 10 kg each brackets, conforiming to Fe.290 Gde-E-165 (Brackets over 10 kg each to be measured under 'Structural Steel') complete all as specified and directed by Engineer-in-Charge.

Supply and fix battery 100 AH, 12 V suitbale for solar light fitting after taking down the un serviceable battery complete all as specified and directed by Engineer-in-Charge. Make : Exide.

Supply and fix LED light fittings 12 Watt suitable for solar security light after taking down the un serviceable light fittings complete all as specified and directed by Engineer-in-Charge.

Supply and fix Battery compartment box made up of MS sheet 2mm thick size of 580 X 445 X 255 mm with MS cover, locking arrangement and fixing accessories with inside weather proof coated and out side two coats of Aluminium paint including writing of pole number in black colour paint etc complete all as specified and directed by Engineer-in-Charge.

36SHRI RADHEY ASSOCIATES

Saini Enterprises

H.B. Traders