ADDITION ALTERATIONS AND SPL REPAIRS TO VARIOUS OTM ACCN INCL PROVN OF ACCN FOR DUTY OFFICER CLERK AND VISITORS ROOM AT ARTY CENTRE UNDER GE GOLCONDA

Amount

Lump sum price worked out by the Contractor for “BUILDINGS AND STRUCTURES” " as listed in Schedule ‘A’ Part-I Representing ** _______ % ____________ percent *Above / Below the lump sum price of Rs.16,45,000.00 inserted by the MES in Schedule ‘A’ Part-I

Lump sum price worked out by the Contractor for “INTERNAL ELECTRIFICATION” " as listed in Schedule ‘A’ Part-II Representing ** _______ % ____________ percent *Above / Below the lump sum price of Rs. 76,212.78 inserted by the MES in Schedule ‘A’ Part-II

Lump sum price worked out by the Contractor for “SEWAGE DISPOSAL” as listed in Schedule ‘A’ Part-III Representing ** _______ % _________________ percent *Above / Below the lump sum price of Rs. 15,68,339.02 inserted by the MES in Schedule ‘A’ Part-III

Lump sum price worked out by the Contractor for “EXTERNAL WATER SUPPLY” as listed in Schedule ‘A’ Part-IV Representing ** _______ % ______________ percent *Above / Below the lump sum price of Rs. 3,42,777.54 inserted by the MES in Schedule ‘A’ Part-IV

Lump sum price worked out by the Contractor for “EXTERNAL ELECTRIFICATION” as listed in Schedule ‘A’ Part-V Representing ** _______ % ____________ percent *Above / Below the lump sum price of Rs 7,12,200.72 inserted by the MES in Schedule ‘A’ Part-V

Schedule 'A' Part VI (Addition /Alterations and Spl repairs (B/R & E/M)) This Schedule is not prepriced by MES and the prepriced rate has not been indicated in column No 5 and shall be treated as Rs 0.00 indicates this fact only.The tenderer is required to quote their rates in Column 7. This Schedule consists of items Serially numbered as 7 to 223

M & L pre-painted galvalume aluminium zinc coating GI based corrugated Mangalore profile sheet 0.50 mm thick of any colour having tensile strength 550 mpa as in roof covering fixed with self tapping screws including Dismantling of AC sheets / Galvalume sheet / GI Sheet of corrugated or semicorrugated etc. sheets in roof coverings / Mangalore pattern roofing tiles or with ceiling tiles or slate roofing including battens for tiles, shingles etc of any size including tilting fillets n exc 15 cm centre to centre all as specified and directed.

M & L pre-painted galvalume aluminium zinc coating GI based corrugated Mangalore profile sheet 0.50 mm thick of any colour having tensile strength 550 mpa as in cladding to wall, fixed with self tapping screws all as specified and directed.

M&L pre- painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof overing fixed with self tapping screws including Dismantling of Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings and boarding, any description fixed in any position with nails all as specified and as directed.

M&L pre- painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in ridge, hip, valley gutter or cladding to wall, fixed with self tapping screws including Dismantling of Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings and boarding, any description fixed in any position with nails all as specified and as directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for all as specified and as directed.

Dismantling timber scantlings 40 Sqcm and over in section in any position in framed work all as specified and as directed.

S & F for Steel work in tubular trusses & vertical post including special shaped washer etc complete using ERW or induction butt welded tubes conforming to I.S. 1161-1979 grade st-240 all as specified and as directed.

S & F for MS framed structure roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats of Grade Fe 410 -W (Gde- E- 250) quality- A etc.all as specified and as directed.

M & L for preparation of new or previously untreated steel surfaces of any description, over 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer all as specified and as directed.

Drilling holes round, drill or cut in second class hardwood diameter or side not exc 15 mm dia and complete all as specified and as directed.

S & F for mild steel screw bolts of 5 to 10 mm diameter of shank (machine made) with hexagonal or square heads at one end and screwed the other, each screwed end to be fitted with washers and one hexagonal or square nut, length of bolt exc. 10 cm. but not exc 15cm complete all as specified and as directed.

M & L for brick work with sub-class `B' bricks, straight or curved on plan exceeding 6 M mean radius built in cement mortar 1:6 including Demolition of brick work or stone/ boulder masonry, built in cement mortar including all quoins, pillars etc. all as specified and as directed.

M&L for brickwork with sub class ‘B’ bricks, straight or curved on plan to anin half brick thick walls built in cement mortar 1: 4 including demolition of brick work or stone/ boulder masonry, built in cement mortar including all quoins, pillars etc. all as specified and as directed.

Taking down cement plaster on wall of any desdriptions incl racking out joints for key scrubbing with water etc. all as specified and as directed.

M & L for rendering 15mm thick in cement mortor 1:4 (5 mm thick with IWPC @ 3% by weight of cement over a coat of 10 mm thick ) on Brick wall surfaces, finished even and smooth without using extra cement ( IWPC measured separately ) all as specified and as directed.

M & L for rendering 10mm thick in cement mortor 1:6 on Brick wall surfaces, finished even and smooth without using extra cement all as specified and as directed.

M&L for two coats of oil bound distemper over a coat of chalk whiting primer on newly plastered surfaces including 1.5 mm thick wall care putty on wall including preperation all as specified and as directed.

M&L for preparing new plastered surfaces and applying Two coats of cement based paint on surfaces of walls all as specified and as directed.

M&L for complete removal of existing treatment and applying two coats of oil bound distemper over a coat of alkali resistant primer on old surface of walls including 3mm thick wall care putty on wall complete all as specified and as directed.

M&L for complete removal of existing treatment and applying two coats of cement base paint on walls surfaces all as specified and as directed.

Preparation of old painted steel surfaces of any description, over 10 cm width or girth, not otherwise described and applying one coat of synthetic enamel paint all as specified and as directed.

M&L for preparation of old painted wood and wood based surfaces of any description, not otherwise described, over 10 cm width or girth and applying one coat of Synthetic enamel paint (Ordinary tint) all as specified and as directed.

Demolition of cement concrete (unreinforced) of any description of any position not otherwise specfically provided for as in sunken floors & floor etc all as specified and as directed.

M&L for Machine cut kota stone slab flooring 20 -25mm thick over & incl cement screed base CM(1:6) 20mm thick laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete including Dismantling Stone slabs and tiles of any description or thickness in floors,plinth Protection, aprons etc Laid, bedded and pointed in any mortar,complete all as specified and as directed.

M&L for Machine cut kota stone slab 20 -25mm thick in riser of steps, skirting, dado and pillar laid over & incl cement backing CM(1:4) 10mm thick and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete including Dismantling Stone slabs and tiles of any description or thickness in floors,plinth Protection, aprons etc Laid, bedded and pointed in any mortar,complete all as specified and as directed.

M&L 75mm thick plain cement concrete 1 : 4 :8 Type D2 (using 40mm graded stone aggregate) as in sub base of floors laid in alternative bays including necessary form work all as specified and as directed.

M & L for 25 mm thick PCC 1:2:4 Type B0 (using 12.5 mm graded stone aggregate) below tiles for levelling of existing surface complete all as specified and as directed.

Taking down Chowkats or frames not exceeding 1.5 Sq. M each (Without taking off shutters from the frames) complete all as specified and as directed.

Taking down Chowkats or frames exceeding 1.5 Sq. M but not exceeding 4 Sq. M each (Without taking off shutters from the frame) complete all as specified and as directed.

Taking down shutters of any description not exceeding 1 Sq. M each complete all as specified and as directed.

Taking down shutters of any description exc. 1.0 Sq. M but not exc. 2.0 Sqm each complete all as specified and as directed.

S & F Second class hard wood plain, solid, straight chowkats and frames, wrought, framed, rebated on the solid, rounded or chamfered, put together with glue pinned at joints all as specified and as directed.

S&F 35 mm thick factory made Plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated supplied and fitted to chowkats all as specified and as directed.

S&F 30 mm thick 2nd class hard wood gauzed and skeleton shutters for doors & Windows open rebated and prepared to receive glass, gauge etc., divided into square with plain chamfered or rounded mitered and rebated sash bars, any number, edges of framing, plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc, size of members of shutters all as specified in SSR Part-I Section 8 clause 8.24 (a)/ 8.24 (b) complete all as specified and as directed.

S & F 100 mm long medium weight, cold rolled mild steel Butt hinges all as specified and as directed.

S & F 75 mm long medium weight, cold rolled mild steel Butt hinges all as specified and as directed.

S & F 150 mm size mild steel pressed handles, oval type, stove enamelled black complete all as specified and as directed.

S & F 125 mm size mild steel pressed handles, oval type, stove enamelled black complete all as specified and as directed.

S & F 125 mm long mild steel barrel tower bolts, stove enamelled black, with bright bolt all as specified and as directed.

S & F 100 mm long mild steel barrel tower bolts, stove enamelled black, with bright bolt all as specified and as directed.

S & F for 300 mm mild steel sliding door bolts, plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate all as specified and as directed.

S & F 125 mm long mild steel wire type I Gate and shutter, hook & eye all as specified and as directed.

S&F 170 mm, ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and as directed.

S & F 125 mm long floor door stopper of aluminium alloy body, and tongue, ISI marked, anodised, with hard drawn steel spring, fixed in floor all as specified and as directed

S & F stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.4 mm and fixed with wooden beeds all as specified and as directed.

M & L for hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads all as specified and as directed.

S & F for 4 mm thick Sheet glass, ordinary quality and glazing with oil putty or wooden beading in squares not exceeding 0.5 Sq. M in each pane all as specified and as directed.

S & F Mild steel Angles, bars, flats etc., as in supports for stiffening of fencing, wall ties, hold fasts, clamps and similar small articles confirming to Fe 410-O 0r Fe 310-O all as specified and as directed.

M & L for plain Cement Concrete Type C1 1:3:6 (using 20 mm graded granite stone aggregate) cast in situ in lintels up to 1.5 M span, cills and other similar bands, plinth courses, parapets, copings, bed plates and the like including weathering, slightly rounded all as specified and as directed.

M & L for preparation of new or previously untreated wood and wood based surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of Synthetic enamel paint (Ordinary tint) over a coat of Pink primer all as specified and as directed.

S & F true or horizontal level 600mmx600mm panels, false ceiling, hot dipped galavnised steel sections exposed suface with precoated capping, main tee of size 24x32mm at every 1200mm c/c and cross tee of size 24x27mm (1200mm & 600mm long) at every 600mm c/c and wall angle of size 19x19mm fixed to perimetere wall, as per manufacturer's instructions, grid to be suspended at every 1200mm c/c in both directions by using 3mm dia pre-straightened GI wire at every 1200mm internal at the main tee, including 9mm thick gypsum board of size 600mm X 600mm with rear size aluminium foil and front side PVC lamination, complete including dismantling wall and ceiling boards (fibre, pulb, insulation etc) or insulation boards slabs/blankets any thickness including cover fillets all as specified and as directed.

S&F of curtain rod 25mm MS decorative type powder coated all as specified in repairs complete all as specified and as directed.

S&F of 25 mm dia MS brackets to curtain pipe, decorative type powder coated complete all as specified and as directed.

M & L for APP based polymeric membrane weighing minimum 3Kg/Sqm and minimum 3 mm thick reinforced with polyster non wove fabric (weight not less than 150 gms/sqm) laid over primed surface including bituminous primer conforming to IS-3384 applied @ 0.3 ltrs/sqm by forced application and applying one coat bitumen grade 85/25 @ 1.2 Kg/Sqm over finished with one coat of aluminium paint @ 100 ml/sqm, 10 cm overlap fused uniformly by LPG torch flame over and including M&L rendering 10mm thick on brick work or concrete surfaces in CM 1:4 and finished even and smooth without using extra cement with IWPC @ 3% (IWPC measured separately) as in roof slabs over and including 40 mm thick padding concrete PCC 1:2:4 type B0 (12.5mm graded stone aggregate) with IWPC (IWPC measured and paid seperately) including taking down existing felt, plaster and preparing the surface of roof by cleaning of foreign materials down with water and roughening surfaces of old concrete floor or concrete surfaces by picking, sweeping clean and washing down with water to remove dust, etc.and brushing neat cement slurry with 3 Kg., of cement per square metre complete all as specified and as directed” Note :-Rate included taking down and refixing of earth strips or any other in the same position

Supply only integral water proofing compound all as specified and as directed.

S&F PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube suppling fixing in opening etc.all as specified and as directed.

S & F Factory Made Solid PVC Moulded Door Shutter with particle board core, 28 to 30mm thick(stiles), with 2, 4, or 6 raised paneldesign with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification& drawing all as specified and as directed.

S&F 100 mm Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type B-21 and fixed to PVC Doors complete all as specified and as directed.

S&F 125 mm length of aluminium anodised barrel tower bolts of extruded section and fixed all as specified and as directed.

S&F 125 mm length of extruded aluminium alloy handles, fabricated type, anodised all as specified and as directed.

S & F Mild steel work framed work as in guards bars, grills, barred iron doors, framed and hung gates, including pintle hinges, stops, hand made sliding bolts etc. and similar work confirming to Fe 290 Gde - E - 165 all as specified and as directed.

S&F MS bands, straps, support or stays for rain water, flat iron for securing wire mesh including cutting to length, drilling hole for fixing bolts, cranking etc. and confirming Fe-290 grade E-165.all as specified and as directed.

S&F in repairs Vitreous China squatting pan , "Orissa" pattern size 580 X 440 mm white with intgrel footrest (excluding flushing cistern & flush pipe) including 110mm dia PVC SWR 'P' or 'S' trap, fixing of cistern, complete including provision of cement concrete all as specified and as directed.

Suply only PVC valveless syphonic action type flushing cistern 10 lit capacity low level white with inlet, ball valve, float and handle including brackets and 32mm PVC flush pipe flush pipe complete all as specified and as directed.

S & F PVC valveless syphonic action type flushing cistern 10 lit capacity low level white with inlet, ball valve, float and handle including brackets and 32mm PVC flush pipe flush pipe complete all as specified and as directed.

S&F in repairs PVC connection 15mm dia, 45 Cms long with brass ferrules on both ends fixed complete all as specified and as directed.

S & F in repair 15mm bore Bib taps, chromium plated cast copper alloy but fancy type, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and as directed.

S&F in repairs 15 mm dia fancy type stop valves/ angle cock chromium plated screwed down, high pressure, screwed both ends for iron pipe or for unions and fixed complete all as specified and asdirected.

M&L for 15 mm bore GI Tubing medium grade with all fittings fixed to wall and ceiling in floor complete as specified including taking down existing u/s GI pipe line complete all as specified and as directed.

M&L for 20 mm bore GI Tubing medium grade with all fittings fixed to wall and ceiling in floor complete as specified including taking down existing u/s GI pipe line complete all as specified and as directed.

M&L for 25 mm bore GI Tubing medium grade with all fittings fixed to wall and ceiling in floor complete as specified including taking down existing u/s GI pipe line complete all as specified and as directed.

S&F for rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) of 2000 ltrs capacity hoisted and fixed in position all as specified including dismantling old tank complete all as specified and as directed.

S&F for rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I of capacity 2000 litre all as specified and as directed.

S&F 25 mm Ball brass valves, high pressure, with polythene float and fly-nut complete, screwed for iron pipe or brass ferrule and fixed all as specified and as directed.

S&F in repair 25 mm Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and as directed.

S&F in repair 20 mm Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and as directed.

S & F PVC( SWR ) pipes 110mm dia single socketed , in any lenth with rubber ring joints as rainwater, soil waste and vent pipe (with all fittings) fixed to wall or laid in trenches incl taking down complete all as specified and as directed.

S & F PVC( SWR ) pipes 75mm dia single socketed , in any lenth with rubber ring joints as rainwater, soil waste and vent pipe (with all fittings) fixed to wall or laid in trenches incl taking down complete all as specified and as directed.

S&F PVC (SWR) bends any radius 110mm bore in repairs all as specified and as directed.

S&F PVC (SWR) bends with access door any radius 110mm bore in repairs all as specified and as directed.

S&F PVC(SWR) vent cowl 110mm bore all as specified and as directed.

S&F PVC (SWR) bends any radious 75 mm dia completee all as specified and as directed.

S&F PVC (SWR) junction single (single T) equal or unequal with access door of bore 75mm all as specified and as directed.

M&L non skid coloured ceramic floor tiles 7-8 mm thick (square/ rectanglar ) area of each tile exc 0.11 sqm but n. exc 0.18 sqm , set and jointed in neat cement slurry and pointed with white or coloured cement to match complete over screed bed or bedding layer 15 mm thick CM 1:6 for laying floor finishes including dismantling floor, hearth or wall tiling incl cement mortar bedding (but not backing) and rubbish of the premises all as specified and as directed.

S&F for glazed ceramic coloured tiles of size 350x250x7mm/450x350x7 mm thick for vertical surfaces as in dado/skirtings set and jointed in neat cement slurry and pointed in white or coloured cement to match including Rendering 10 mm thick backing coat in CM 1:4 of fair faces of brick work or concrete surface and Dismantling floor, hearth or wall tiling incl cement mortar bedding (but not backing) and rubbish of the premises all as specified and as directed.

S&F for non skid coloured ceramic tiles 7 to 8mm thick (square or rectangular) area of each tile exceeding 0.11sqm but not exceeding 0.18 sqm, in floors etc, and cement screed in CM 1:6, 15 mm thick and jointed in neat cement slurry and pointed all as specified and as directed.

S&F for glazed ceramic coloured tiles of size 350x250x7mm/450x350x7 mm thick for vertical surfaces as in dado/skirtings set and jointed in neat cement slurry and pointed in white or coloured cement to match and over rendering in CM 1:4, 10mm thick all as specified and as directed.

M&L Rendering 5 mm thick in CM 1:3 on fair faces of brick surfaces of ceiling finished the surface fair and even complete all as specified and as directed.

M&L for Preparing of newly plastered surfaces and applying three coats of white wash on walls complete and all as specified and as directed.

M&L for Preparing of old plastered wall surfaces and applying One coat of white wash on walls complete and all as specified and as directed.

M&L for praparation of newly plastered surfaces and applying Three coats of White wash on Ceiling complete all as specified and as directed.

M&L for praparation of old plastered surfaces and applying One coat of White wash on Ceiling complete all as specified and as directed.

S&F in repair 110 mm CP Grating complete all as specified and as directed.

S&F in repair for PVC waste pipe for urinal/WHB with complete fitting etc 38 mm dia. 60cm long all as specified and as directed.

S & F in repair vitreous china urinal, Half stall type, white (excluding flushing cistern & flush pipe & waste pipe) but exncluding waste pipe, complete including providing & fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with screws, pointing around urinal back in cement complete all as specified and as directed.

M & L for 75 mm thick PCC 1:3:6 type C2 (Using 40 mm graded granite stone aggregate) as in plinth protection finishd even and smooth with out using extra cement all as specified and as directed.

M&L Machine pressed precast concrete interlocking paver block with grey cement and pigment any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade all as specified and as directed. (Note: rate including providing PCC 1:2:4 type B1 to sides of tiles as filleting / support.)

Taking down completely existing treatment along with plaster as in sunken slabs vertical faces all as specified and as directed.

M&L 40mm thick cement concrete type B-1, 1:2:4 (20mm graded aggregate) & surface even & smooth using extra cement with IWPC (IWPC measured and paid seperately) as in sunken slabs all as specified and as directed.

M&L for applying evenly a coat of industrial bitumen 85/25 at the rate of 1.2kg/Sqm including cleaning surface complete all as specified and as directed.

M&L for 15mm thick in CM 1:3 rendering on brick or concrete surfaces finished even and smooth without using extra cement with IWPC (IWPC measured and paid separately) as in sunken slab all as specified and as directed.

S&F of low density polyethylene pipes (LDPE) of pressure rating 6 Kgf/sqcm fixed to walls, floors etc of 32mm bore as in spouts for sunken slabs all as specified and as directed.

M&L cement concrete type E-2, 1:5:10 (40mm graded stone aggregate) as in mass fillings all as specified and as directed.

S&F of steel ventilators with top hung shutters, glazed and wire gauzed and bottom half portion fixed glazed type complete including hings, steel peg stay complete all as specified and as directed.

S&F in repairs wash down water closet (pedestal pattern) complete white with plastic water closet seat black closed pattern with flat bottom and cover and mild steel chromium plated or aluminised hinging device and flush pipe of polythelene of low or density or PVC 32mm dia for low level flushing cistern incl pedestal pan and trap, and connection to drain (or outgoing pipe) complete all as specified and as directed.

S&F in repair vitreous china wash basin, white, flat back size 550 x 400mm including 01 Nos cast copper alloy 15mm CP fancy type pillar tap, 01 Nos 32mm waste coupling , one pair of MS bracket, cutting for and pinning in ends of brackets or erecting stand complete all as specified and as directed.

S & F in repair tubular towel rail 20 mm dia ‘D’ type 60 cm long between flanges of brass chromium plated all as specified and as directed.

S & F in repair Soap dish, any type, fixed to plugs with chromium plated brass screws complete all as specified and as directed.

S&F PVC (SWR) floor trap 75mm dia outlet, plain with grating including jointing with solvent cement in repairs all as specified and as directed.

S&F PVC (SWR) junction double (double T) equal or unequal with access door of bore 75mm all as specified and as directed.

S&F PVC (SWR) junction double (double T) equal or unequal with access door of bore 110mm

S & F in repairs health faucet with spray jet (hand shower) cromium plated incl all fitting & fixtures complete all as specified and as directed.

S&F in repair two way bib cock/tap 15 mm chromium plated complete fancy type of branded as specified and as directed.

M & L for sand filling under floors or in foundations including watering and consolidation

Surface excavation n.exc 30cm deep and averaging 15cm deep and getting out in hard/dense soil all as specified and as directed.

Excavation in trenches n.exc 1.5 m wide and n.exc 1.5 m in depth for foundation,etc or for shafts wells, cesspits, manholes, pier holes etc n.exc 10 sqm on plan and n.exc 1.5 m in depth and getting out in hard/dense soil all as specified and as directed.

Returnng, filling in including spreading, levelling, watering and well ramming in layers not exc 25cm all as specified and as directed.

Spreading & Levelling and well ramming including watering as required in layers n.exc 25 cm thick all as specified and as directed.

Removing excavated material n exc 50m and depositing where directed at a level n exc 1.5m above the starting point all as specified and as directed.

M&L for PCC type D2 1:4:8 (40mm graded Aggr) in foundations, filling and mass Conc all as specified and as directed.

Use & waste of rough finished flat Form work to sides of concrete foundations rafts, footing, base of columns, raft and raft beams, sides & soffits of foundation (if any) of foundation and plinth beams and similar work all as specified and as directed.

M & L for reinforced Cement Design mix M-25 (using 20 mm graded granite stone aggregate) in foundations including rafts, footings and mass concrete, foundation beams, plinth beams, bases for columns, basement slabs etc all as specified and as directed.

Use and waste of form work to sides and soffits of floor or roof beams, lintles, cantlevers, shelves incl supports etc for rough finished surface of concrete all as specified and as directed.

M&L for reinforced cement Design mix M-25 1:2:4 (20 mm graded aggregate) in lintel bands, roof beams and cantilevers etc all as specified and as directed.

Use & waste of rough finished Square, rectangular or polygonal Form work to sides of pillars, posts, struts, columns and stanchions all as specified and as directed.

M & L for reinforced Cement Concrete Designl mix M-25 (using 20 mm graded granite stone aggregate) in Columns, piers, posts and struts all as specified and as directed.

Use and waste of form work to chullah hoods,chajjas troughs and similor items including edges all as specified and as directed.

M&L for reinforced Cement Design mix M-25 (20 mm graded aggregate) nominal mix for Chajjas all as specified and as directed.

Use and waste of formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) rough finished surface all as specified and as directed.

Use and waste of formwork to edges of concrete flats, treads, breaks in floors,window cills, concrete railings,openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/PCC bands in walls, horizontal or sloping and similar work exc 10cm but n exc 20cm wide rough finished surfaces all as specified and as directed.

M&L for reinforced Cement Design mix M-25 20 mm graded aggregate nominal mix for slabs supported on walls, beams and columns in floors, roofs, landings balconies canopies, desk slabs and in shelves and the like all as specified and as directed.

M&L for mild steel TMT bars 10mm dia and over, cut to length bent to shap required including cranking, bending spirally for hooping for columnshooking ends and binding with and including mild steel wire (annealed not less than 0.9 mm dia or securing with clips all as specified and as directed.

All as per Sl item No. 138 above but 6 to 8 mm dia bars all as specified and as directed.

All as per Sl item No.138 above but 5mm dia and over upto and incl 10 mm dia in spacers, stirrups and binders all as specified and as directed.

M&L brick work with fly ash bricks built in CM 1:4 straight or curved on plan exc 6 mtr mean radius all as specified and as directed.

M & L for half brick wall with fly ash bricks straight or curved on plan to any radius built in cement mortar 1:4 complete all as specified and as directed.

M&L hardcore of gauge n.exc 63mm deposited, spread and levelled in layers n.exc 15cm thick, watered and rammed to a true surface in broken stone or boulders all as specified and as directed.

S&F for 150mm long aluminium anodized barrel tower bolts of extruded section and fixed all as specified and as directed.

S&F for 150 mm long alluminium alloy anodized handles fabricated type all as specified and as directed.

S & F for vitreous china squatting pan (Orissa pattern) size 580X440mm white with integral foot rest (excl flushing cistern) including flushing pipe etc complete all as specified and as directed.

S&F for stop valve/angle cock 15mm bore cast copper alloy but fancy type chromium plated with long shank and cup screwed down high pressure fixed to iron pipes or for unions as specified and as directed

S&F for concealed stop valve/angle cock 15mm bore cast copper alloy chromium plated and cup screwed down high pressure screwed both end for iron pipes or for unions and fixed all as specified and as directed.

S&F for fancy type bib tap 15 mm bore chromium plated, cast copper alloy , screwed for iron pipe or for brass ferrule all as specified and as directed.

S&F for rotational moulded polyethylene water storage tanks (cylinderical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I of capacity 1000 litre all as specified and as directed.

S&F of ball valves high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed to 25mm bore pipe all as specified and as directed.

S & F for tubular towel rail 20 mm dia ‘D’ type 60 cm long between flanges of brass chromium plated all as specified and as directed.

S&F for GI pipes medium grade 15 mm dia with all fittings and fixed to walls and ceilings or laid in floors.

All as per SI Item No 153 but 25 mm dia complete all as specified and as directed.

S&F for GI pipes medium grade t 20 mm dia complete all as specified and as directed.

S & F for gun metal 20mm bore dia of pipe globe or gate valve with iron wheel head screwed both ends for iron pipe all as specified and as directed.

S & F for 110 MM PVC (SWR) pipe single socketed in any length with rubber ring joints laid in trenches or in floors all as specified and as directed.

S & F for 75mm PVC (SWR) pipes single socketed in any length with rubber ring joints, laid in trenches or in floors all as specified and as directed.

S & F for 75 mm PVC (SWR) bends with access door all as specified and as directed.

S&F for Collapsible steel gates, top hung, consisting of channel pickets, pivoted flat bars, top and bottom runners, brass handles etc., as specified, erected in position and securing runners with holdfasts and brackets, complete all as specified and as directed.

Figured glass pin headed quality in squre n.exc. 0.5 Sqm in each pane of 3.00mm thick all as specified and as directed.

S&F 0.63 mm nominal dia of wire galvanised mild steel wire cloth and average width of aparture 1.40 mm and fixed with tinned tacks or galvanised wire stapple complete all as specified and as directed.

M & L for APP based polymeric membrane minimum weighing 3Kg/Sqm and minimum 3mm thick reinforced with polyster non wove fabric (weight not less than 150 gms/Sqm) laid over primed surface including bituminous primer conforming to IS-3384 applied @ 0.3 Ltrs/Sqm by forced application and applying one coat bitumen grade 85/25 @ 1.2 Kg/Sqm over finished with one coat of alluminium paint @ 100 ml/Sqm 10cm overlap fused uniformly by LPG torch flame, over fand including rendering 15mm thick on brick work or concrete surfaces in CM 1:4 and finished even and smooth without using extra cement with IWPC (IWPC measured separately) as in roof slabs complete all as specified and as directed. ( Make: IWL / STP/ TIKKITAR) .

S&F vitreous china wash basin, white, flat back size 550 x 400mm including 01 Nos cast copper alloy 15mm CP pillar tap, 01 Nos 32mm waste coupling and pipe, one pair of MS bracket, cutting for and pinning in ends of brackets or erecting stand complete all as specified and as directed.

S & F vitreous china urinal, Half stall type, white (excluding flushing cistern & flush pipe & waste pipe) but exncluding waste pipe, complete including providing & fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with screws, pointing around urinal back in cement complete all as specified and as directed.

M&L CP Soap dish approximate size 100mm oval type or any type, fixed to plugs with chromium plated brass screws all as specified and as directed.

M&L for 100mm thick cement concrete type B-2 1:2:4 (40mm graded stone aggregate) all as specified and as directed.

Cutting in to existing manholes for connecting new drains making good to pipe 150mm internal dia and rendering cutting out existing benching for and forming branch channel(1/2 round or 3/4 section) in cement concrete 1:2:4 type B-1 smooth finished and reforming benching all as specified and as directed.

Excavating post holes or similar holes, each not exceeding 0.5 Cum, getting out in Hard/ Dense soil, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, watering, and removing surplus soil all as specified and as directed.

M&L for walling of random rubble, uncoursed, well bonded, bedded and solidly hearted, built in cement mortar 1:6 all as specified and as directed.

M&L for Rendering 15 mm thick in CM (1:4) on fair faces of stone surface of walls finished even and smooth w/o using extra cement all as specified and as directed.

M&L for plain Cement Concrete Type B1 1:2:4 (using 20 mm graded stone aggregate) in foundation filling, mass concrete and similar works and for MS Pipe fixing all as specified and as directed.

S&F MS Plain plates, square cut, with riveted, bolted or welded attachment Fe-410-W (Gde-E-250) quality A all as specified and as directed.

M&L for Rendering 15 mm thick in CM (1:4) on fair faces of brick or concrete surface of walls finished even and smooth w/o using extra cement all as specified and as directed.

M&L for reinforced Cement Concrete 1:2:4 (using 20 mm graded aggregate) nominal mix for slabs supported on walls, beams and columns in floors, roofs, landings balconies canopies, desk slabs and in shelves and the like all as specified and as directed.

S & F for gun metal 25mm bore dia of pipe globe or gate valve with iron wheel head screwed both ends for iron pipe all as specified and as directed.

S&F of ball valves high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed to 25mm bore pipe all as specified and as directed.

S&F 125mm dia brass chromium plated shower rose with or without swivel joints including fixing to steel pipe or union all as specified and as directed.

Taking down existing sub main wiring of any description and size including earth wire, batten, conduits, for taking in credit and making good the disturbed surfaces of walls, floors etc. all as specified and as directed.

Taking down carefully existing point wiring of any description for (light, fan, sockets, bells etc) complete including fittings such as sunken boxes, switches, sockets, ceiling rose, lamp holders, brackets, fittings, pendants, fan regulators etc and making good the disturbed surface of walls, floors etc all as specified and as directed.

M&L Point wiring for one light point/fan point/bell point controlled by one switch with 1.5 sqmm multistrand copper conductor cable PVC (FRLS) insulated unsheathed copper conductor single core multi stand flexible cable and 1.50 sqmm PVC (FRLS) insulated unsheathed copper conductor single core cable ( green colour) as earth lead in and including PVC rigid conduit with all fittings for concealed type on stone / brick, masonary walls, roof etc including new CI/MS sunken box of required size and all as directed by Engineer-in-Charge & 3 mm thick plastic laminated sheet for housing switches sockets, regulators etc. including cutting/running chases, pinning in and making good the disturbed surfaces to match with the existing specification all as specified and directed.

All as per item no.182 but One 5 pin 5/6 Amps switch socket outlet on independent board complete all as specified and as directed.

All as per item no.182 but One 5 pin 5/6 Amps switch socket outlet on same board complete all as specified and as directed.

All as per item no.182 but for One 5 pin 15 / 16 Amps switch socket outlet point on independent board with 2.5 sqmm PVC (FRLS) insulated unsheathed copper conductor single core multi stand flexible cable and 2.5 sqmm PVC (FRLS) insulated unsheathed copper conductor single core cable (green colour) as earth lead complete all as specified and as directed.

M & L point wiring for one light point/fan point/bell point controlled by one switch with 1.5 sq. mm (nominal area) single core PVC insulated FRLS unsheathed multi-stranded copper conductor cable (maintaining colour code), 1100 volts grade in and including non metalic rigid PVC conduit medium grade with appropriate size with all fittings (ISI Marked) suitable for concealed wiring on stone/brick, masonary walls, roof etc including modular sunken box of adequate size with suitable modular plate cover for mounting modular switches, sockets, regulators, light fittings etc. complete with all fittings and accessories fixed to wall/ ceiling for one light/ fan /bell point controlled by one oneway modular switches including one run 1.5 sqmm (nominal area) PVC insulated FRLS unsheathed multi-stranded copper conductor cable green in colour for earth continuity conductor connected to common earth dolly including cutting/running chases, pinning in and making good the disturbed surfaces to match with the existing specification, complete all as specified and as directed.

All as per Item No.186 above but one 5 Amps 3/5 pin modular socket outlet on independent board complete all as specified and as directed.

All as per Item No. 186 above but for one 3/5 pin 5/6 Amps modular socket outlet point on same board with other switches complete all as specified and as directed.

All as per item No 186 but for One 3 pin 15 / 16 Amps modular switch socket outlet point on independent board with 2.5 sqmm PVC (FRLS) insulated unsheathed copper conductor single core multi stand flexible cable and 2.5 sqmm PVC (FRLS) insulated unsheathed copper conductor single core cable (green colour) as earth lead complete all as specified and as directed.

M&L switch piano flush type single pole one way 5 Amps complete all as specified and as directed.

M&L switch socket combination flush type 5 Amps Multipurpose 2 in 1, 3 pin/5 pin with porcelain base complete all as specified and as directed.

M&L Switch socket combination 2 in 1 flush type universal 3 pin 5 & 15 Amps complete all as specified and as directed.

M&L lamp holder insulated body with back plate suitable for battern fittings complete all as specified and as directed.

S&F Ceiling rose surface bakelite 65 x 50 mm 2/3 terminals complete all as specified and as directed.

M&L Fan Regulator (Rotary step type, Switch/Socket type Dimmer) 230/240V, AC complete all as specified and as directed.

S&F Modular switch, single pole, one way, 6 Amps one module complete all as specified and as directed.

S&F Modular 6A 3 pin universal socket outlet, 2 module complete all as specified and as directed.

S&F Modular switch, single pole, one way, 16 Amps one module complete all as specified and as directed.

S&F Modular socket outlet 2-in-1, 6/16 Amps, 2 module complete all as specified and as directed.

S&F modular stepped type electronic fan regulator 220 volts, 100Watt complete all as specified and as directed.

S&F 9 W LED bulb of base B22 with color temp 6500K all as specified and as directed.

Supply and fixing LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specified and as directed.

S&F Wall mounted indoor decorative 20W LED 6000K (4 ft.), extruded aluminium batten in anodised finish with opal diffuser, IP20 heat sink provided for efficient heat dissipation and integrated electronic driver, lamp color white complete set including necessary connection with twin twisted unsheathed PVC copper cable of suitable size complete all as specified and as directed.

Supply and fixing LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified and as directed.

S & F LED light fittings, 1x10 watts bulk head luminaires etc complete with all accessories and including connecting up with twin core twisted flexible PVC copper conduct cabe of 23/0.0076 from ceiling rose all as specified and as directed.

Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and as directed.

S & F Ceiling fans, complete with three blade, down rod, accessories 230V, 1200mm sweep, with Squirrel cage induction motor complete all as specified and as directed.

S & F wall mounted heavy duty Air circulator with three blade and accessories 230V, 450mm sweep complete all as specified and as directed.

Supply and fix exhaust fan, steel body AC single Phase. 230V of size 300mm sweep with blades, and frame and louvers all as specified and as directed.

S&F Sheet metal enclosure MCB distribution board including 200 Amps bus-bar single pole and neutral 240V, 8 Ways, double door including taking down of existing sheet metal enclosure complete all as specified and as directed.

All as per item No-210 above but TPN 4 way, 415 V complete all as specified and as directed.

All as per item No-210 above but TPN 6 way, 415 V complete all as specified and as directed.

Supply and fixing 240V, 10 KA 'C' curve miniature circuit breaker (MCB) of SPN and current carrying capacity 32 AMP, in the MCB DB Complete with connection testing and commissioning all as specified and as directed.

Supply and fixing 240V, 10 KA 'C' curve miniature circuit breaker (MCB) of single poles and current carrying capacity 5 to 32 AMP, in the MCB DB Complete with connection testing and commissioning all as specified and as directed.

Supply and fixing 415V 10KA 'C' curve miniature circuit breaker (MCB) of TPN/FP of current carrying capacity 40 to 100 AMP in the DB complete with connection testing and commissioning all as specified and as directed.

Submain wiring with two single core PVC (FRLS) insulated flexible copper conductor cable of size 6 Sqmm and one single core PVC (FRLS) insulated unsheathed flexible copper conductor cable green colour of size 6.0 Sqmm as earth lead in and including PVC conduit medium grade with all fittings suitable for concealed type and making good the disturbed wall surfaces to match with existing specification all as required at site complete with all as specified and as directed.

All as per item No.216 above but Sub main wiring using two runs of 4.0 sqmm wire with 4.0 sqmm earth wire complete all as specified and as directed.

All as per item No.216 above but Sub main wiring using four runs of 6.0 sqmm wire with one run of 6.0 sqmm earth wire complete all as specified and as directed.

S&F in repair bracket suitable for fixing of building security light fitting made out from 40 mm bore GI pipe, medium grade 2 metre in length, made to shape as required, fixed to pole with MS flat iron clamp of size 25x4mm duly welded, bent to shape and making holes etc complete including necessary nuts, bolts & washer etc as required and all as specified and as directed.

Taking down Ceiling fan, ceiling cable end, dismantling blades and removing fan and blades and refixing ceiling fan and connecting up including provision of cable from ceiling rose or connector to fan complete all as specified and as directed.

M&L fabricated of iron bands,straps,supports or stays for rain water ,ventilating pipes including bolts if required hooks(stay) heavy for large gates ,hook and pintle hinges,large hasps and staples ,chains,hand made slidings bolts clamps hold fasts,wall ties hook for hanging fans,plain angles cleats for securing purlins to wood trusses or rafters ,knee piece inserts two way and three way straps plate washers and similar small articles conforming to Fe 290 Gde E-165, including clamps nuts,bold,fixing and old one complete all as specified and as directed.

M & L for making / drilling hole to RR masonry/brick wall of any thickness for fixing exhaust fan of 300mm dia and fixing 2 Nos of precast RCC circular frame and filled gap with PCC (1:2:4) incl plastering, white washing etc for making good and match to existing wall surface complete all as specified and as directed.

M&L for earthing with galvanized mild steel earth plate electrode 60 centimetre x 60 centimetre x 6.3 mm thick buried directly in ground vertically to a depth not less than 2.25 metres below ground level, the top edge of the earth plate at a depth of not less than 1.5 metres below ground level connected to galvanized iron earth wire of 4 mm dia by means of bolts, nuts and washers made out of GI / steel earth wire protected by GI light grade pipe 15 mm bore, 20mm dia medium grade galvanised iron watering pipe perforated at bottom 1.75m long with funnel and wire mesh, common salt and charcoal filling complete and connecting to main switch board / control board all s shown in electrical plate of SSR Part - I connected to earthing test point and including testing on completion complete all as specified and as directed. NOTE: The unit rate shall also include for excavation, earth work in hard/dense soil, plain cement concrete 1:2:4 type C1 by using 20 mm graded aggregate in pit, 75 mm thick reinforced cement concrete 1:2:4 type B1 using 20 mm graded aggregate cover duly reinforced with 6 mm dia TMT bars @ 75mm centre to centre both ways with 12mm dia MS bar handle made to shape, GI pipe & GI earth lead 7mm dia upto 7.50m length, wire mesh, salt, charcoal complete.

RMK PROJECTS

Sri Lakshmi Enterprises

SANJEEV CONSTRUCTIONS

BHATNAGAR ASSOCIATES

THE DECAN ENGINEERING AND REFRIGERATION COMPANY

M/s RAMA LAKSHMI CONSTRUCTIONS

Sri Associates