Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹27.9 LAccepted-AOC | L1 | Accepted-AOC L1 | |
| 2 | L2₹30.3 L+₹1.6 L (5.49%)Rejected-Finance | L2 | Rejected-Finance Not being lowest | |
| 3 | L3₹30.8 L+₹2.1 L (7.45%)Rejected-Finance CB 1 MAHAVEER NAGAR BARMER 344001 RAJ | BARMER | RAJASTHAN | 344001 | L3 | Rejected-Finance Not being lowest | |
| 4 | L4₹34.8 L+₹6.1 L (21.3%)Rejected-Finance NEAR RAILWAY STATION UTARLAI BARMER RAJASTHAN PIN 344001 | BARMER | RAJASTHAN | 344001 | L4 | Rejected-Finance Not being lowest | |
| 5 | L5₹35.2 L+₹6.5 L (22.7%)Rejected-Finance 00 LALPUR KICHHA ROAD RUDRAPUR KICHHA RUDRAPUR UDHAM SINGH NAGAR UTTARAKHAND 263148 | UDAM SINGH NAGAR | UTTARAKHAND | 263148 | L5 | Rejected-Finance Not being lowest |
Tender Value
Refer Docs
EMD Value
₹99,900
Closing Date
27 Jul 2021, 6:00 pmClosed
GE Army Jaisalmer
GE Army Jaisalmer 345001
Repair and maint of internal wiring EM fittings and fixtures at Zone-II under the jurisdiction of GE (A) Jaisalmer
2021_MES_452803_1
8112/21-22/e8
Open Tender
Electrical and Maintenance Works
Item Rate
270 days
Jaisalmer
Please refer Tender documents.
8 documents required · 8 mandatory
₹500
GE Army Jaisalmer
₹99,900
Yes
12 Oct 2021
19 Jun 2021
29 Jul 2021
19 Jun 2021
27 Jul 2021
5 Jul 2021
Amount
Taking down carefully copper/aluminium point wiring (light, fan socket or power) complete including PVC Casing Capping/conduit, fixture and fitting such as switches, ceiling roses, pendents, regulators, sockets , light fitting etc removing materials for taking credit and making good disturbed surface of walls,floors etc all as directed.
Taking down old point wiring from existing concealed conduit including fixture and fitting such as switches, ceiling roses, pendents, regulators, sockets etc and making good disturbed surface of walls, floors etc all as directed.
Taking down the existing unserviceable Old unsv Switches, Sockets, Fan regulator, 2 way switch, Bell push, Bell, Ceiling Rose, Holder etc as existing at site including necessary making good the disturbed surfaces to match with the existing finishes all as specified.
Taking down of old unsv submain wiring of anytype any size complete all as specified and directed with casing capping / surface conduit/ existing concealed conduit complete all as specified and directed
Taking down submain wiring any type any size from existing conduit complete all as specifie d and directed
Taking down the existing unserviceable main switch / cut out / DBs of any type / capacity / description as existing at site including necessary making good the disturbed surfaces to match with the existing finishes all as specified.
Taking down the existing unserviceable MCBs/MCCBs of any type / capacity / description as existing at site including necessary making good the disturbed surfaces to match with the existing finishes all as specified.
Taking down of old unsv tubelight fitting /bulkhead/ garden light/ gate light of any descriptionlight fitting any type any watt complete all as specified and directed
M&L for point wiring using approved colour coding as per IS (Red , Black and Green for single phase circuits),with multistranded copper conductor 1.5 sq mm nominal cross-sectional area , single core, PVC insulated and unsheathed FRLS cable 1100 Volts grade, ISI-694 marked with valid CML No.in and inciuding medium grade, PVC casing caping/conduit and accessories on wall/roof/floor etc, ISI marked with mild steel/pressed steel sunken box of 1.8 mm thick and 60 mm deep (with earth dolly) duly painted with two coats of anti corrosive paint/aiuminium paint over a coat of red oxide primer internally. and two coats of black bituminous paint over a coat of red oxide primer externally,covered with 3 mm thick plastic laminated sheet cover for fixing of switches, socket and fan regulators etc, inciuding PVC insulated multistranded copper conductor 1.5 sq mm nominal cross sectional area single core FRLS cable as earth continuity conductor to common earth and connecting to earth dolly complete all as specified and directed by Engineer-in-charge for One light or fan point, controlled by one, one way switch 5 Amps.
All as per Item No 9.00 here-in-before but for one bell/buzzer point controlled by one push botton.
All as per Item No 9.00 here-in-before but for one socket out let 3 pin 5 Amps on the same board.
All as per Item No. 9.00 here-in-before but for one socket outlet of 3 pin 5 Amp on independent board.
All as per Item No. 9.00 here-in-before but for one light point controlled by two, 2 way switches.
All as per Item No 9.00 here-in-before but for one socket outlet of 15 Amps fixed on independent board with 4.0 Sq mm multistranded copper conductor wire FRLS PVC insulated and 4.0 Sq mm multistranded copper conductor wire FRLS PVC insulated as earth wire complete all as specified.
M&L for point wiring using approved colour coding as per IS (Red , Black and Green for single phase circuits),with multistranded copper conductor 1.5 sq mm nominal cross-sectional area, single core, PVC insulated and unsheathed FRLS cable 1100 Volts grade, ISI-694 marked with valid CML No.in and existing PVC Concealed conduit of 20 mm bore with accessories in wall floor etc with 3 mm thick plastic laminated sheet cover for fixing of switches, sockets and fan regulators etc, inciuding PVC insulated multistranded copper conductor 1.5 sq mm nominal cross sectional area single core FRLS cable as earth continuity conductor to common earth and connecting to earth dolly complete all as specified and directed by Engineer-in-charge for One light or fan point, controlled by one, one way switch 5 Amps.
All as per Item No 15.00 here-in-before but for one bell/buzzer point controlled by one push botton.
All as per Item No 15.00 here-in-before but for one socket out let 3 pin 5 Amps on the same board.
All as per Item No. 15.00 here-in-before but for one socket outlet of 3 pin 5 Amp on independent board.
All as per Item No 15.00 here-in-before but for one socket outlet of 15 Amps fixed on independent board with 4.0 Sq mm multistranded copper conductor wire FRLS PVC insulated and 4.0 Sq mm multistranded copper conductor wire FRLS PVC insulated as earth wire complete all as specified and directed by Engineer-in-charge.
S&F switch piano, flush type, 5 amps, 230 volts, single pole, one way (ISI marked) complete specified.
S/F modular switch one way 6A, 1 module
S&F switch piano, flush type, 15 amps, 230 volts, single pole, one way (ISI marked) complete all as specified.
S/F modular switch one way 16A, 1 module
S&F switch piano, flush type, 5 amps, 230 volts, single pole, two way (ISI marked) complete all as specified
S&F sockets outlet multipurpose 2 in 1, 5 Amps flush type confirming to IS all as specified.
S/F modular socket 6A-2/3 pin combined 2 module
S&F sockets outlet multipurpose 2 in 1 pin, 5 and 15 Amps flush type confirming to IS all as specified.
S/F modular socket 6A/16A , 2/3 pin combined 2 module
S&F ceiling rose, PVC of size 65 mm x 18 mm two to three terminals (ISI marked) all as specified.
S&F bell push flush type 5 Amps complete all as specified.
S&F stepped type, electronic fan regulator on the existing phenolic laminated sheet etc as required all as specfied
S/F modular fan regulator , 120W 2 module on the existing sheet etc as required all as specfied
M&L for lamp holder, PVC/ polycarbonate type with cord grip cap suitable for prndant fittings including taking down unserviceable lamp holder of any description complete all as specified
M&L for lamp holder, PVC/ polycarbonate type with back plate suitable for batten fittings including taking down unserviceable lamp holder of any description complete all as specified
S&F bell AC single pole Ding Dong type 230 volt all as specified.
M&L for submain wiring with approved colour code/as per IS (Red, black & green for single phase) circuit with two single core PVC insulated cable with multistranded copper coductor of nominal cross sectional area of 4.0 Sq mm (FRLS) in and including PVC casing & capping non metallic including one run of PVC insulated multistranded copper conductor nominal cross section area of 4.0 Sq mm (FRLS) of continuous earth wire green in colour including taking down old u/s sub-main wiring complete all as specified and directed by Engineer-in-charge. (NOTE: Two runs of 4.0 sqmm cable & One run of 4.0 sqmm cable and One run of PVC casing & capping shall be paid as one unit length.)
M & L for submain wiring with approved colour code/as per IS (Red, black & green for single phase) circuit with two single core PVC insulated cable with multistranded copper coductor of nominal cross sectional area of 4.0 Sqmm (FRLS) in existing concealed/Surface conduit non metallic including one run of PVC insulated multistranded copper conductor nominal cross section area of 4.0 Sqmm (FRLS) of continuous earth wire green in colour including taking down old u/s sub-main wiring complete all as specified and directed by Engineer-in-charge. (NOTE: Two runs of 4.0 Sqmm cable & One run of 4.0 Sqmm cable shall be paid as one unit length.)
M&L for submain wiring with approved colour code/as per IS (Red, black & green for single phase) circuit with two single core PVC insulated cable with multistranded copper coductor of nominal cross sectional area of 6.0 Sq mm (FRLS) in and including PVC casing & capping non metallic including one run of PVC insulated multistranded copper conductor nominal cross section area of 6.0 Sq mm (FRLS) of continuous earth wire green in colour including taking down old u/s sub-main wiring complete all as specified and directed by Engineer-in-charge. (NOTE: Two runs of 6.0 sqmm cable & One run of 6.0 sqmm cable and One run of PVC casing & capping shall be paid as one unit length.)
M&L for submain wiring with approved colour code/as per IS (Red, black & green for single phase) circuit with two single core PVC insulated cable with multistranded copper coductor of nominal cross sectional area of 6.0 Sqmm (FRLS) in existing concealed /surface conduit non metallic including one run of PVC insulated multistranded copper conductor nominal cross section area of 6.0 Sqmm (FRLS) of continuous earth wire green in colour including taking down old u/s sub-main wiring complete all as specified and directed by Engineer-in-charge. (NOTE: Two runs of 6.0 Sqmm cable & One run of 6.0 Sqmm cable shall be paid as one unit length.)
S & F for LED tube light fitting 20 Watt 4 Feet in lenth, IP 20 Protection, wall mounted type, Slim LED Batten with extruded aluminium housing and polycarbonate diffuser, elegant design with end caps, having excellent thermally managed polycarbonate extrution, LM 80 Certified LED having Integral Electronic Constant Current Driver Opreating voltage 240 V , 50Hz AC Supply and Operating tempraeture 0 to 50 C, Power factor ≥ 0.9, Lumen output ≥ 2000, necessary mounting arrangements , provision of new 3 core multistranded copper conductor of size 23/0.193 from ceiling rose to fitting with white color flexible pipe complete all as specified Make Orient, Philips, Crompton, Havells etc
S & F for LED tube light fitting 10 Watt, 2 Feet or 591 MM in length, IP 20 Protection, wall mounted type, Slim LED Batten with extruded aluminium housing and polycarbonate diffuser, elegant design with end caps, having excellent thermally managed polycarbonate extrution, LM 80 Certified LED having Integral Electronic Constant Current Driver, IP 20 Protection, Opreating voltage 240 V , 50Hz AC Supply and Operating tempraeture 0 to 50 C, Power factor ≥ 0.9, Lumen output ≥ 1000, necessary mounting arrangements on PVC Square box 2 Nos, provision of new 3 core multistranded copper conductor of size 23/0.193 from ceiling rose to fitting with white color flexible pipe complete all as specified Make Orient, Philips, Crompton, Havells etc
Supply and fixing of recessed/ceiling mounted down lighter with CRCA housing with high bright LED,idealy suited for low ceiling areas Brilliance 36watt LED, size 2ft x 2ft The product features color tuning from 3000 K to 6500 K, necessary mounting arrangements , provision of new 3 core multistranded copper conductor of size 23/0.193 from ceiling rose to fitting with white color flexible pipe complete all as specified Make- Philips, Orient, crompton or equivalent.
S & F LED light fitting 1 X 10 W bulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size complete all as specified Make- Philips, Orient, crompton or equivalent.
S & F LED 15 Watt Square surface mounted LED panel. PDC aluminum housing and high translucent frosted plastic diffuser makes it a robust Luminaire. Efficacy 100lm/w complete all as specified Make Orient, Philips, Crompton, Havells etc
Supply and fixing LED building security light fitting 35 Watt (or above) 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with electronic driver including thermal management in multiple optics complete with IP 65/66 protection complete with pre wired and necessary mounting arrangements, provision of new 3 core multistranded copper conductor of size 23/0.193 from ceiling rose to fitting complete all as directed by Engineer-in-Charge. Make Orient, Philips, Crompton, Havells etc
S & F in repair GI pipe bracket medium grade of 40 mm dia for building security light,clamps made of FI 40 mm x 6 mm Incl nuts, bolts & washers, painting complete as specified.
S&F Integral decorative LED bollard with polycarbonate diffuser square shaped with IP 65 protection suitable for 10 watts LED with necessary MS base box made out of MS sheet of 2 mm thick of suitable size abbended in PCC 1:2:4 base, elecrical connections with adequate size including removal of old unserviceable one complete as all specified and as directed. Make:Havells Cat part No Havells OUNTBL10WLED830PSYMTOPMMA (0.6 M) , Philips or its equavalent in Wipro.
S & F for LED post top lantern/gate Light 35 watt light fitting made of cast aluminium spigot housing with decarative opal acrylic diffuser with IP 65 protection complete with all accessories including removal of old unserviceable complete all as specified and directed. Make-Havells Cat part No CORALPT35WLED830PSYMTOPC or its equavalent in Bajaj, Philips, Crompton.
Supply and fix energy saving, environment friendly & robust Highbay/Mediumbay roof truss light LED for covered shed 150 W IP65 luminaire with high efficacy with fixing arrangement such as bracket,MS clamp,Nut bolts etc and connecting completed as specified and directed. Note:- Fixing of light at any height arrangement of ladder should be provided by contractor.
S & F for MCCB DB VTPN 4 way 415 V double door IP 43 with provision for FP MCCB/Isolator/RCCB etc as incommer and SP/TP MCBs as out going complete prewired including Bus Bar etc suitable for operation on 415 volt 50 Hz AC supply complete all as specified and as directed
S & F for sheet metal enclosure MCB DB TPN 4 way with 200 Amps rated bus bar 415 volts double door with magnitic locking system complete all as specified and as directed.
S & F for sheet metal enclosure MCB SPN DB 8 way with 200 Amps rated bus bar 240 volts double door with magnitic locking system complete all as specified and as directed.
S & F for sheet metal enclosure MCB SPN DB 4 way with 200 Amps rated bus bar 240 volts double door with magnitic locking system complete all as specified and as directed.
S & F for sheet metal enclosure MCB SPN DB 2 way 240 volts sngle door with magnitic locking system complete all as specified and as directed.
S & F MCCB 4P 415 volts 16 KA suitable for fixing on VTPN DB of capacity 100 Amps with extended terminals complete all as specified. Make : Schindier / Legrand / L&T / ABB / Havells Note:- Suitable size and frame of MCCB required as per existing DBs at site.
Supply and fixing 415V 10KA 'C' curve miniature circuit breaker (MCB) of tripple pole and neutral rated capacity TPN 40 To 100 Amps current carrying capacity in the DB complete with connection testing and commissioning complete all as specified and as directed. Make - Shindier/ Legrand/ L&T / ABB
Supply and fixing 415V 10KA 'C' curve miniature circuit breaker (MCB) of tripple pole rated capacity TP 25 To 63 AMP Amps current carrying capacity in the DB complete with connection testing and commissioning complete all as specified and as directed. Make - Shindier/ Legrand/ L&T / ABB
Supply and fixing miniature circuit breaker (MCB) of single pole and neutral SPN 32 AMP 240V, 10KA 'C' curve in the MCB DB complete with connection testing and commissioning complete all as specified and as directed. Make - Shindier/ Legrand/ L&T / ABB
Supply and fixing miniature circuit breaker (MCB) of single pole SP 5-32 AMP 240V, 10KA 'C' curve in the MCB DB complete with connection testing and commissioning complete all as specified and as directed. Make - Shindier/ Legrand/ L&T / ABB
S/F flame proof rotary type switch with termination box in LM6, 16A, single pole 250V Make- Sudhir, Shyam or equivalent.
Supply and fixing LED light fitting 1x30 Watt flame proof, CMRI certified recommended for gas/ vapor group of IIA & IIIB, Zone 1 & 2 and IP 65 protection with die cast aluminum housing with heat resistant toughened glass, with LED tube light fixtures driver, holders, connector etc. Complete with all accessories prewired and including connecting up with three core flexible copper conductor cable in flexible metalic conduit with suitable size. Make- Sudhir, Shyam or equivalent.
SS SODHA ENTERPRISES
M/S PRASHANT BENIWAL
M/S TANUSHREE CONSTRUCTION COMPANY
S R ENTERPRISES
Leelashah Enterprises
JAI ENGINEERING COMPANY
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .