Repair and renovation works at RCMA office inside Factory at HAL Lucknow

Name of the Individual / Firm / Company: * Mandatory

Type of ownership Pvt. Ltd. / Proprietorship/Partnership/ Public limited/ Govt. Agencies/ Trust

Details of Constitution or Legal Status such as certificate of incorporation, shops and establishments, Contractor registration No etc.,

Address for correspondence:

Contact details

Intending parties having credentials as mentioned below may participate in e-tendering. The pre-qualification requirements for the works are as under :-

List of similar works executed in the past 7 years with value, schedule period of completion reasons for delay in completion if any and salient features of works, with documentary evidence of satisfactory completion.

PAN No.:

Constitution and legal status i.e. Proof of proprietary/Partnership firm or company & authorised person for receiving or signing the documents to be submitted.

Goods and Service Tax ID No.

SAC for the said work shall be 995419

Bank account details such as account no., name of account holder, name and address of the bank, IFSC code duly certified by the bank along with cancelled cheque as a document of proof shall be attached.

Registered Contractor

Average annual financial turn over during the last 3 years, ending 31st March 2025 of the previous financial year [ should not be less than 30% of Amount put to tender]

EMD of Rs.47900.00

Latest Solvency Certificate issued from Nationalized/ scheduled Bank issued and NOT before 12 months from the last date of Tender submission

Experience of having successfully completed similar works during last 7 years ending last day of previous month. [Latest work experience certificate may be uploaded]

(i) THREE similar completed works each costing not less than the amount equal to 40% of the estimated cost.

(ii) TWO similar completed works each costing not less than the amount equal to 50% of the estimated cost.

(iii) ONE similar completed work each costing not less than the amount equal to 80% of Amount put to the tender.

Details of person holding the power of Attorney (If different from contact person)

DECLARATION I

DECLARATION II

DECLARATION III

Description of item

Dismantling tile work for thickness of tiles 10 mm to 25 mm in floors and roofs laid in cement mortar including stacking material within 50 metres lead, cost of all labours, scaffolding, tranportation, loading, unloading, T & P etc. required for proper completion of the work, all complete at any height as per specification and as directed by Engineer-in-charge.

Dismantling /Demolishing R.C.C work of any description manually/ by mechanical means disposal of unserviceable material within 50 metres lead including cost of all labours, scaffolding, tranportation, loading, unloading, T & P etc. required for proper completion of the work, all complete at any height/ depth as per specification and as directed by Engineer-in-charge.

Taking down carfully damaged / old wash basin, EWC, urinal etc with all fitting and removing of debris at directed place and stacking of serviceable material and depositing to Civil factory store disposal of unserviceable material within 50 metres lead including cost of all labours, tranportation, loading, unloading, cutting, wastages, T & P etc. required for proper completion of the work, all complete at any height, as per specification and as directed by Engineer-in-charge.

Taking out doors, windows and clerestory window shutters (steel or wood) Of area 3 sq. metres and below including stacking within 50 metres lead and stacking of serviceable material and depositing to Civil factory store disposal of unserviceable material within 50 metres lead including cost of all labours, tranportation, loading, unloading, T & P etc. required for proper completion of the work, all complete at any height, as per specification and as directed by Engineer-in-charge

Providing and laying Brick work Cement mortar 1:6 (1 cement :6 coarse sand) with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth, including stacking material within 50 metres lead, cost of all labours, material, scaffolding, tranportation, loading, unloading, wastages, T & P etc. required for proper completion of the work, all complete at any height, as per specification and as directed by Engineer-in-charge.

Providing, rendering, dubbing out cement plastering 15 mm thick with cement mortar 1:6 (1 cement: 6 coarse sand) on walls/ceiling, of rough / fair faces of brick wall / concerete surface of any description including jambs, soffit and edges of plastering chamfering wherever required, finishing of surface even and smooth without using extra cement, including hacking on concrete surface, cost of all labours, material, scaffolding, tranportation, loading, unloading, wastages, T & P etc. required for proper completion of the work, all complete at any height as per specification and as directed by Engineer-in-charge.

Providing and laying cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 40 mm nominal size) in floor/ roof/ pavements, laid to required slope and camber in panels as required, including consolidation finishing and tamping, cost of all labours, material, scaffolding, tranportation, loading, unloading, wastages, cutting, T & P etc. required for proper completion of the work, all complete at any height, as per specification and as directed by Engineer-in-charge.Engineer-in-charge.

Providing hacking of CC flooring including cost of all labours, material, equipment tranportation, loading, unloading, wastages, cutting, T & P etc. required for proper completion of the work, all complete at any height, as per specification and as directed by Engineer-in-charge.Engineer-in-charge.

Providing and fixing Heat Resistant Terrace Tiles (300 mm x 300 mm x 20 mm) with SRI (solar refractive index) > 78, solar reflection >0.70 and initial emittance > 0.75 on waterproof and sloped surface of terrace,of shade & make Kajaria/ Johnsons/ Nitco/ Somany, as approved by EIC, laid on 20 mm thick cement sand mortar in the ratio of 1:4 (1 cement : 4 coarse sand) and grouting the joints with mix of white cement & marble powder in ratio of 1:1, including rubbing and polishing of the surface upto 3 cuts complete, including providing skirting upto 150 mm height along the parapet walls in the same manner including cost of all labours, material, wastages, loading, unloading, T & P etc. required for proper completion of the work, all complete at any height as per specification and as directed by Engineer-in-charge. Prior Sample shall be approved by the EIC

Providing and laying Vitrified tiles of shade & make Kajaria/ Johnsons/ Nitco/ Somany, as approved by EIC, in floor in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved brand, manufacturer, colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only . Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily. Glazed Vitrified tiles Matt/Antiskid finish of size ( 600 X 1200 ) or as per site requirement. Prior Sample shall be approved by the EIC, including cost of all labours, materials, wastages, cutting, T&P etc. required for proper completion of the work, all complete at any height/floor as per specification, drawing and as directed by Engineer in charge.

Providing and laying polished granite stone slab machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, colour as approved by EIC in required design, texture and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including cost of all materials, labours, cutting, T & P, wastages, etc. required for proper completion of the work, all complete at any height, as per specifications, drawings and as directed by Engineer-in-Charge (EIC).

Providing edge moulding to 18 mm thick Granite work counters, Vanities etc., including machine polishing to edge to give high gloss finish etc. including cost of all materials, labours, equipment, T & P, wastages, cutting, etc. required for proper completion of the work, all complete at any height, as per specifications, drawings and as directed by Engineer-in-Charge (EIC).

Providing opening of required size & shape for wash basin/ kitchen sink in kitchen platform, vanity counter and similar location in marble/ Granite/ stone work, including necessary holes for pillar taps etc, including moulding, rubbing, grinding and polishing of cut edges, joints should be chamfered in turning points, cost of all materials, labours, T & P, wastages, circular/ oval cutting/ general cutting as per requirement etc. required for proper completion of the work, complete at any height, as per specification, drawing and as directed by E.I.C.

Removing dry or oil bound distemper, water proofing cement paint, synthetic enamel or of any painted surface and the like by scrapping, sand papering and preparing the surface smooth, including necessary repairs to scratches, scaffolding, work to any height with all safety measures, cost of all labour, material, T&P, etc. required for proper completion of the work, all complete at any height as per drawing, specification and direction of EIC.

Providing and applying 01mm thick wall care putty (Birla/ JK/ Asian/ Berger or as approved ) on wall and ceiling for making surface smooth & even including preparation of surface by sand paper, wire brushing, washing down, filling holes, removal of nails etc, including cost of all labours, materials, scaffolding and wastage, work to any height with all safety measures and T&P etc. required for proper completion of the work, all complete at any height, as per drawing, specification and direction of EIC.

Providing & applying two coats or more of 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gram/litre, of approved make & shade such as Asian/Berger/ICI to walls of any description at any height / depth of approved shade and colour, all complete to achieve even shade and colour : New/old work (two or more coats) over and including water thinnable priming coat with cement primer having VOC content less than 50 gram/litre including preparation of surface by sand papering, filling holes, cracks with birla putty stopping ,removing oil/smudge marks spreading and removing coverings, to doors, windows, floors, fittings, etc. to protect from splashes, removing and replacing furniture's, moveable cupboards,chicks, blinds, etc. washing floors, cleaning glass,joinery, leaving the premises clean neat and tidy, disposing rubbish outside in dustbins including cost of all labours, materials, scaffolding, work to any height with all safety measures, T&P etc. required for proper completion of the work, all complete at any height, as per specification, drawing and as directed by Engineer in charge.

Providing and applying two or more on new/old work over an under coats of synthetic enamel paint on wall / wood/ steel surface of any description any girth at any height with first quality synthetic enamel paint of Asian / Shalimar / Berger/ ICI/ Dulux etc. of approved tint which give an even shade and including preparing of surface by sand papering, removing oil/ smudge marks, filling, touching, including cost of all labours, materials, scaffolding, T&P etc. required for proper completion of the work, all complete at any height with all safety measures, as per specification, drawing and as directed by Engineer in charge.

Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of size 450x350mm / 350 x 250 / 300X450mm or larger size of make kajaria / johnson/ nitco/ orient-bell as approved colour, shades, pattern and print / design on walls, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete, cost of all labours, materials, scaffolding, cutting, wastage, T&P etc. required for proper completion of the work, all complete at any height, as per specification, drawing and as directed by Engineer in charge.

Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of make kajaria / johnson/ nitco/ orient-bell as approved, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/sqm including pointing in white cement mixed with pigment of matching shade complete, cost of all labours, materials, scaffolding, cutting, wastage and T&P etc. required for proper completion of the work, all complete at any height/floor, as per specification, drawing and as directed by Engineer in charge.

Providing, Fabricating & fixing of Structural steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses, hot finished welded type tubes etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, welding and bolted with special shaped washers, cost of all labours, materials, wastages, erection, T&P etc. required for proper completion of the work, all complete at any height, as per specification, drawing and as directed by Engineer in charge.

Providing , fabricating and fixing Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. MS works In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works including cost of all labour material, cutting as per site requirement, T & P, erection, scaffolding, wastage etc. required for proper completion of the work, all complete at any height/depth, all as per specifications, drawings and as directed by Engineer-in-Charge (EIC).

Providing & applying two coat or more coat of weather resistant exterior paint of first quality of approved shade and of make like apex of Asian /weather coat long life of Berger/weather shield max of ICI, as approved by EIC including priming coat of exterior primer applied @ 0.90 litre/10 sqm, preparation of surfaces, by brooming down, removal of flakes, oil, grease marks by sand papering where required, filling holes /Cracks with birla putty / snowfilla, spreading and removing covering to doors, windows, fittings, floor, etc. to protect from splashes, removing & replacing moveable furnitures, leaving the premises clean and tidy, disposing Rubbish outside in dustbins removal of all splashes and cleaning glass and joinery (Two or more coats applied @ 1.43 litre/ 10 sqm over), including cost of all labours, materials, scaffolding, wastages T&P etc. required for proper completion of the work, all complete at any height with all safety measures, as per specification, drawing and as directed by Engineer in charge.

Providing & fixing at all heights, levels and locations colour finish Aluminium alloy roofing sheets of 0.56 mm thick alloy of make TATA/ Jindal or as approved by EIC, IS designation 31500, temper Hx8 conforming to IS 737 and dimensions as per IS code 2676 with characteristics of good formability and corrosion resistance. The profile sheets shall be fixed to truss members in slope or required pitch or curvature with Hex cap headed self drilling/tapping Stainless steel screws M6, 50 mm long with 3 mm EPDM seal washer etc. all including cost of all labours, materials, scaffolding, sundries, wastages, cutting, T&P etc. required for proper completion of the work, all complete at any height, as per specification, drawing and as directed by Engineer in charge. (Cost of truss / frame work shall be paid separately). 0.56 mm, Aluminium Color coated troughed profile with center to center pitch of 200 mm, depth of 32 mm, overall profile width1092 mm, cover width 1000mm.

Providing and fixing of Pre-coated colour or mill finish Aluminium Roofing Accessories in 0.71 mm thickness precoated/mill finish aluminium Ridges plain (500- 600mm), ,Alloy 31500 (IS designation) for color, coating shall be 5-7 microns epoxy primer on both sides of the sheet and polyester top coat 15-18 microns, using self drilling/tapping SS screws of size 6 x 50mm with 3mm thick EPDM seal and SS plain washer complete including cost of all labours, materials, scaffolding, sundries, wastages, cutting, T&P etc. required for proper completion of the work, all complete at any height, as per specification, drawing and as directed by Engineer in charge

Providing and fixing ISI marked flush door shutters-30 mm thick including ISI marked Stainless Steel butt hinges with necessary screws of make Century /Swastik /Action /TESA /Kitply, as approved conforming to IS : 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters, ISI marked Stainless Steel butt hinges with necessary screws including cost of all labours, materials, wastages, cutting, T&P etc. required for proper completion of the work, all complete at any height, as per specification, drawing and as directed by Engineer in charge.

Providing and fixing 125mm bright finished brass handles with screws ISI marked including cost of all labours, materials, T&P etc. required for proper completion of the work, all complete at any height, as per specification, drawing and as directed by Engineer in charge

Providing and fixing 250x10 mm bright finished brass tower bolts (barrel type) with necessary screws ISI marked including cost of all labours, materials, T&P etc. required for proper completion of the work, all complete at any height, as per specification, drawing and as directed by Engineer in charge

Providing and fixing 150 mm bright finished floor brass door stopper with rubber cushion, necessary brass screws to suit shutter thickness including, cost of labour, materials, T&P etc, required for proper completion of the work, all complete as per specifications, drawings and as directed by Engineer-in-Charge (EIC).

Providing and fixing Aluminium extruded section body tubular type universal hydraulic door closer of approved brand and manufacture like Godrej/ Amar/Everest as approved by EIC, (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 36 kg to 80 kg and door width from 701 mm to 1000 mm), with double speed adjustment with necessary accessories and screws etc. including cost of materials, labour, T&P etc, required for proper completion of the work, all complete at any height, as per specifications, drawings and as directed by Engineer-in-Charge.

Providing and fixing Powder Coated Aluminium (minimum thickness of powder coating 50 micron ) work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required, thickness of aluminium section shall be 1.5 - 2.00mm including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / SS stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) including disposal of unserviceable material and stacking of serviceable material with in 50 meters lead, cost of all labour, material, T&P, wastage, cutting, etc. required for proper completion of the work, all complete at any height, as per specification, drawing and as directed by Engineer in charge.

Providing and fixing powder coated Aluminium (minimum thickness of powder coating 50 micron ) work for shutters of doors, windows & ventilators including hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides, Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required thickness of aluminium section shall be 1.5 - 2.00mm including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / SS stainless steel screws, all complete, including cost of all labour, material, T&P, wastage, cutting etc. required for proper completion of the work, all complete at any height, as per drawing, specification and direction of E.I.C. (Glazing, paneling and dash fasteners to be paid for separately).

Providing and fixing glazing in Aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge (Cost of Aluminium snap beading shall be paid in basic item) With float glass panes of 5.0 mm avg thickness (weight not less than 12.50 kg / sqm) including cutting straight or curved as per site requirement, rounding off edges jointing with steel screws all complete as per architectural drawings, cost of all labours, material, wastage, T & P etc. required for proper completion of the work, all complete at any height, as per specification and as directed by Engineer in charge.

Providing and fixing white vitreous china pedestal type water closet (European type) with ISI marked white solid plastic seat and lid of make Somany/Parryware/ Cera/ Hindware as approved with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required : with all fittings and fixtures complete, cost of all labours, material, wastage, T & P, cutting and making good the walls and floors wherever required, etc. required for proper completion of the work, all complete at any height, as per specification and as directed by Engineer in charge.

Providing and fixing wash basin of make Somany/Parryware/ Cera/ Hindware as approved with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including fittings & painting of brackets, cutting and making good the walls wherever require: White Vitreous China Flat back wash basin size 550x 400 mm with single 15 mm C.P. brass pillar tap, painting of fittings and brackets, including cost of all labours, material, wastage, T & P, cutting wherever required, etc. required for proper completion of the work, all complete at any height, as per specification and as directed by Engineer in charge.

Providing and fixing 15 mm nominal bore C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931 of approved make such as Cera/ L&K/ ARK/ Plumber as approved including cost of all labours, material, wastage, T & P, cutting and making good the walls and floors wherever required, etc. required for proper completion of the work, all complete at any height, as per specification and as directed by Engineer in charge.

Providing and fixing Circular type 100 mm nominal dia PTMT/CP grating of approved quality and colour including cost of all labours, material, T & P, cutting in floors wherever required, etc. required for proper completion of the work, all complete at any height, as per specification and as directed by Engineer in charge.

Providing and fixing 600 mm long CP towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not less than 190 gms complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour, including cost of all labours, material, cutting, wastages, T & P etc. required for proper completion of the work, all complete at any height, as per specification and as directed by Engineer in charge.

Taking out existing wooden / Aluminium door shutter, repair by cutting, resizing, painting etc. and refixing of repaired door shutters to existing door frames, including replacement of old hinges with SS screw by SS hinges and screws etc. as required, including cost of all labours, materials, cutting, wastages, T&P etc. required for proper completion of the work, all complete at any height, as per specification, drawing and as directed by Engineer in charge.

Providing and fixing IS : 12817 marked 100X58X1.90 mm stainless steel butt hinges with stainless steel screws including cost of all labours, materials, T&P etc. required for proper completion of the work, all complete at any height, as per specification, drawing and as directed by Engineer in charge.

Providing and fixing aluminium sliding door bolts 250x16 mm, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to approved colour or shade, with nuts and screws etc. complete 300x16 mm, including cost of all labours, materials, cutting, T&P etc. required for proper completion of the work, all complete at any height, as per specification, drawing and as directed by Engineer in charge.

Providing and fixing 600x120x5 mm glass shelf with edges round off, supported on anodised aluminium angle frame with C.P. brass brackets and guard rail complete fixed with 40 mm long screws, rawl plugs etc. including cost of all labours, materials, cutting, wastages, T&P etc. required for proper completion of the work, all complete at any height, as per specification, drawing and as directed by Engineer in charge.

Providing and fixing C.P. brass long nose bib cock of make Somany/Cera/ L&K/ ARK/ Plumber as approved quality conforming to IS standards and weighing not less than 810 gms including cost of all labours, materials, T&P etc. required for proper completion of the work, all complete at any height, as per specification, drawing and as directed by Engineer in charge.

Providing and fixing 15mm nominal bore C.P. brass angle valve for basin of make Somany/Cera/ L&K/ ARK/ Plumber as approved, mixer and geyser points of approved quality conforming to IS:8931 including cost of all labours, materials, T&P etc. required for proper completion of the work, all complete at any height as per specification, drawing and as directed by Engineer in charge.

Supplying & Fixing of 04 mm thick ACP sheet consisting of 3mm thick FR grade mineral core sandwiched between two Aluminium sheets (each 0.5mm thick).The aluminium composite panel cladding sheet shall be coil coated, with Kynar 500 based PVDF / Lumiflon based fluoropolymer resin coating of approved colour and shade on face # 1 and polymer (Service) coating on face # 2 as specified using stainless steel screws, nuts, bolts, washers, cleats, weather silicone sealant, backer rods etc of make Alstone / Alkor/Aludecor/ Eurobond or as approved, for fixing in Al partition/ Al door etc. including cost of all labours, materials, cutting, wastages, T&P etc. required for proper completion of the work, all complete at any height, as per specification, drawing and as directed by Engineer in charge.

Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to Eureopean type W.C. of quality of make Somany/Cera/ L&K/ ARK/ Plumber as approved including cost of all labours, materials, T&P etc. required for proper completion of the work, all complete at any height as per specification, drawing and as directed by Engineer in charge.

Providing and fixing 15 mm nominal bore C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931 including cost of all labours, materials, T&P etc. required for proper completion of the work, all complete at any height, as per specification, drawing and as directed by Engineer in charge.

Providing and fixing CP Brass 32mm size Bottle Trap of approved quality & including cost of all labours, materials, T&P etc. required for proper completion of the work, all complete at any height, as per specification, drawing and as directed by Engineer in charge.

Providing and fixing Oval shape 450x350 mm (outer dimensions) mirror of superior glass of make Modiguard/Saint Gobain as approved by EIC, shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing including cost of all labours, materials, scaffolding, wastages, T&P etc. required for proper completion of the work, all complete at any height, as per specification, drawing and as directed by Engineer in charge.

Providing and fixing C.P. Brass toilet paper holder including cost of all labours, materials, T&P etc. required for proper completion of the work, all complete at any height, as per specification, drawing and as directed by Engineer in charge.

Disposal of dismantled material like Lime, moorum, building rubbish, brick, concrete, MS parts etc, by mechanical transport including loading,unloading and stacking upto a lead of 2.0 km, cost of all labours, materials, T&P etc. required for proper completion of the work, all complete at any height, as per specification, drawing and as directed by Engineer in charge.

Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc, of make TATA/ Jindal or as approved by EIC, including welding, grinding, buffing, polishing and making curvature (wherever required as approved) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of approved size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.) including cost of all material, labour, cutting, wastages, T&P etc, required for proper completion of the work, all complete at any height as per specification, drawing and as directed by Engineer in charge.

Supplying & Fixing 08mm thick fluted PVC wall panneling of approved brand in required pattern in same or different colour, including cost of beading, channels, angles required for proper fixing of the panelling on wall, with tongue and groove joint or as per manufacturer specifications, to be fixed firmly on wall, including labour, wastage etc. including cost of all material, labour, SS screws, cutting, wastages, T&P etc, required for proper completion of the work, all complete at any height as per specification, drawing and as directed by Engineer in charge.

Providing and fixing Vertical venetian blinds of 75/ 100mm width of approved colour & texture/pattern ( approved designs printed / plain) including its hardware mechanism of repuated manufacturer such as Vista, Aerolux , MAC or as approved all complete with material , fixing, fixing accessories, making holes in concrete / brick wall, making good, wastage etc. including cost of all materials , labours, T & P, cutting wastages, making provisions for harware fittings, etc all complete at all height as per drawing, specification and as per direction of E.I.C. The pattern, design, colour etc shall be approved by EIC. (sample is to be approved before procurment from reputed manufacture) including cost of materials, labour, T&P etc, required for proper completion of the work etc all complete all as per specifications, drawings and as directed by Engineer-in-Charge.

Providing and fixing of make DORMA/Ozone/ Taiton or as approved frameless Automatic Bi-Parting Sliding Door operator for clear opening size approx of 1800mm x 2100mm or as per site requirement, modular design, including internal cover, eagle sensors, and programme switch complete, either Operator Dimensions (L): 4150 mm. The track profile should be separate from the main profile for enabling reduction in vibration. Microprocessor controlled control unit. It should be Self-learning, with adjustable parameters for opening and closing speed, hold-open time and opening and closing froce etc as per direction of Engineer-in-charge .Make Dorma, Ozone , etc or as approved by EIC. Automatic Door should be intgrated with Microwave Sensor / Wireless Push Button / Hand sensor, Safety Light Barrier & Push Button, locking arrangments, access control solutions, door locks, door closers, floor springs and automatic door entry systems. . Also have option of Electromechnical Lock & Battery Pack.The side of door shall also be filled with similar material comprising with aluminium sections,12mm thick toughned glass, locking etc, including cost of materials, labour, T&P etc, required for proper completion of the work etc all complete all as per specifications, drawings and as directed by Engineer-in-Charge.

Providing and fixing GI Metal false ceiling lay in plain tegular edge of approved make Armstrong/ Knauff or as approved by EIC global white color tiles of size 595x595 mm, and 0.5 mm thick with 8 mm drop; made of G I sheet having galvanizing of 100 gms/sqm (both sides inclusive) and electro statically polyester powder coated of thickness 60 microns (minimum), including factory painted after bending, tiled false ceiling of specified materials of size 595x595 mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel sections ( galvanized @ 120 grams/ sqm, both side inclusive) consisting of main "T" runner with suitably spaced joints to get required length and of size 24x38 mm made from 0.30 mm thick (minimum) sheet, spaced at 1200 mm center to center and cross "T" of size 24x25 mm made of 0.30 mm thick (minimum) sheet, 1200 mm long spaced between main "T" at 600 mm center to center to form a grid of 1200x600 mm and secondary cross "T" of length 600 mm and size 24x25 mm made of 0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall angle of size 24x24x0.3 mm and laying false ceiling tiles of approved texture in the grid including, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main "T" runners to be suspended from ceiling using GI slotted cleats of size 27 x 37 x 25 x1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm GI adjustable rods with galvanised butterfly level clips of size 85 x 30 x 0.8 mm spaced at 1200 mm center to center along main T, bottom exposed width of 24 mm of all T-sections shall be pre-painted with polyester paint, including cost of all material, labour, cutting, wastages, T&P etc. required for proper completion of the work, all complete at any height, as per specification, drawing and as directed by Engineer in charge.

Providing and fixing GI Metal false ceiling lay in perforated tegular edge of approved make Armstrong/ Knauff or as approved by EIC global white color tiles of size 595x595 mm, and 0.5 mm thick with 8 mm drop; made of G I sheet having galvanizing of 100 gms/sqm (both sides inclusive) and electro statically polyester powder coated of thickness 60 microns (minimum), including factory painted after bending, tiled false ceiling of specified materials of size 595x595 mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel sections ( galvanized @ 120 grams/ sqm, both side inclusive) consisting of main "T" runner with suitably spaced joints to get required length and of size 24x38 mm made from 0.30 mm thick (minimum) sheet, spaced at 1200 mm center to center and cross "T" of size 24x25 mm made of 0.30 mm thick (minimum) sheet, 1200 mm long spaced between main "T" at 600 mm center to center to form a grid of 1200x600 mm and secondary cross "T" of length 600 mm and size 24x25 mm made of 0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall angle of size 24x24x0.3 mm and laying false ceiling tiles of approved texture in the grid including, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main "T" runners to be suspended from ceiling using GI slotted cleats of size 27 x 37 x 25 x1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm GI adjustable rods with galvanised butterfly level clips of size 85 x 30 x 0.8 mm spaced at 1200 mm center to center along main T, bottom exposed width of 24 mm of all T-sections shall be pre-painted with polyester paint, including cost of all material, labour, cutting, wastages, T&P etc. required for proper completion of the work, all complete at any height, as per specification, drawing and as directed by Engineer in charge.

Total (A)

Above