Loading
Loading…
Loading…
Tender Value
₹63.5 L
EMD Value
₹1.3 L
Closing Date
2 Apr 2026, 9:30 pmClosed
University of Agricultural Sciences Bengaluru
EO - KRISHNAMURTHY D
Construction of walk in growth chamber at department of crop physiology , GKVK
UASBNG/2025-26/OW/WORK_INDENT110/CALL-3
UASBNG/2025-26/OW/WORK_INDENT110/CALL-3
Open
Other Works
Two Tender Document System(Two Cover)
Vice Chancellor Office Bengaluru
6 documents required · 6 mandatory
Liquid assets and /or availability of credit facilities of no less than Rs. xxxxxx Lakhs (estimated cash flow for 3 months of peak construction period)
Total value of civl engineering works executed and payments received in the last five years (year-wise)
List of existing commitments and ongoing works
List of works for which tenders already submitted
Banker Details for reference
Construction equipment owned by the tenderer and equipment proposed to be deployed on this contract, if awarded
Reports on the financial standing of the tenderer, such as profit and loss statements and auditor’s reports for the last five years
Qualification and experience of the key technical and management personnel in permanent employment with the tenderer and those that are proposed to be deployed on this contract, if awarded
List of Financial Resources with Certificates
Should have Satisfactory completed as a prime Contractor, at least one similar work to an extent of 50% (Rs. 38.00 Lakhs.) of the cost of the work in the last five years.
Executed in any one year (for a continuous period of 12 months), the following minimum quantities of work. 1.Earth Work-20.00 Cum 2.PCC/RCC-22.00 Cum 3.SSM-8.00 Cum 4.Solid concrete block-34.00 Sqm 5 Steel work - 4150 Kg 6 Plastering/ Plastering -160.00 Sqm 7 Poly carbonate sheet - 155 Sqm 8 Glass work - 594 Sft 9 GI Mesh work- 92 sqm 10 P/s Hot Air Blower/ Humidifier system 2 Nos 11. P/s 5 tn Air conditioning system -1 Nos
The Tenderer or his identified sub-contractor should posses required valid electrical license for executing building electrification works and should have executed similar electrical works for Rs.18.50 lakhs
The statement as per section-3 (1.5A) of KW4 existing commitments and on going works.
Qualification and experience of the key technical and management personnel in permanent employment with the tenderer and those that are proposed to be deployed on this contract
Registration Certificate of Establishment, Form-C certificate issued by Dept. of Labour Govt. of Karnataka
The statement as per section-3 (1.5B) of KW4 works for which tenders already submitted
Assessed available tender capacity AxNx1.5-B as per clause 3.6 Section 2-ITT of Conditions of contract
Site visit certificate
To qualify for award of this contract, each Tenderer in its name should have in the last five years i.e. 20-21, 21-22, 22-23, 23-24 & 24-25 achieved in at least two financial years an average annual financial turn over of Rs.150.00 Lakhs
Liquid Assets and / or availability of credit facilities of not less than Rs.25.00 lakhs (Credit lines /letter of Credit /Certificates from banks for meeting the fund requirement, etc
GST paid details and IT returns copies for the previous 5 years
Reports on the financial standing of the tenderer, such as profit and loss statements and CA audited reports for the last five years.
₹1,590
₹1.3 L
26 Mar 2026
26 Mar 2026
4 Apr 2026
1 Apr 2026
Construction of walk in growth chamber at department of crop physiology , GKVK
Earth work excavation by manual means for drains, canals, waste weir draft, approach channels, key trench, foundation of Bridges and such similar works, as per drawing and technical specifications, in...
Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes...
Providing Size Stone masonry with hard stone in foundation & plinth with Cement mortar 1:6 (1 cement : 6 coarse sand).
Providing and laying in Cement Concrete for all Basement & surface level works, return walls, retaining walls, sunken floors etc. The granite/trap/ basalt crushed graded coarse aggregates and fine agg...
Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tyin...
Providing and constructing load bearing wall with Solid Concrete blocks of size 400x150x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2...
Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) finished with a top layer 6 mm thick cement plaster with cement mor...
Finishing walls with water proofing cement paint of required shade :New work (Two coats applied @ 4.84 kg/10 m²) to give an even shade after thoroughly brooming the surface to remove all dirt, dust, ...
Providing and fixing G.I. chain link fabric fencing of required width in mesh size 50x50 mm including strengthening with 2 mm dia wire or nuts, bolts and washers as required complete as per the direct...
Providing and fixing Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approv...
Providing and fixing 6mm Clear/opal white/solar bronze/blue/green tinted Multi wall poly carbonate sheet for Tubular structure. The work including cost of all materials, labour charges and usage charg...
Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thick- ness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades,...
Above the GI sheet cladding, Saint-Gobain toughened glass panels of 8 mm / 10 mm thickness will be fixed around the full surrounding of the shed to ensure maximum visibility, enhanced temperature rete...
Supply and fixing Hot Air Blower as per the following technical specifications: Type - SISW, Model - ACSLL, Make - Air Control Systems, with a fan capacity of 1500 CFM and a fan speed of 1440 RPM. The...
Supply and installation of a humidifier system for the Hardening Chamber, designed to maintain precise humidity levels as per operational requirements. The unit includes a high- efficiency industrial ...
Supply and installation of LED lighting system for the Hardening Chamber, suitable for the 20 ft x 25 ft structure to ensure uniform and sufficient illumination throughout the chamber. The setup inclu...
Supply and installation of a 5-Ton Air Conditioning System suitable for maintaining controlled temperature inside the Hardening Chamber. The unit includes a high-efficiency 5 TR air conditioner (Indus...
Supply and installation of a fully equipped Electrical Panel Board designed to control and protect the Air Conditioning system, Heater, LED Lighting, and Humidifier of the Hardening Chamber. The panel...
Fabricating, supplying and fixing GI Mesh table using 'L' angle frame 2" with 5 mm thickness, legs made out of 50x50x2mm thickness with supporing of 40NB GI Pipe, Top of the table fixing using 4mm GI ...
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
KW 3 1.docx
Tender Document • 0.23 MB
DRAWING.PDF
Design Document • 0.90 MB
TN 30.docx
Others - NOTIFICATION • 0.01 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .