Construction of 100 seated hostel at Govt. UGHS, Serakapadi under Muniguda Block

MISCELLANEOUS WORK :Sand Buket as per IS Specicification

Extra lift over initial lift

Filling in foundation and plinth with sand, well watered and rammed to required thickness with all leads and lifts, cost, conveyances & royalty and all taxes of materials, cost of labour, T & P required for the work etc. complete in all respect as directed by the Engineer-in-Charge.

Backfilling with excavated earth

Anti-termite treatment with Chloropyriphos 20%

Cement concrete (1:3:6) with 40 mm in foundation using 40 mm size clean hand black hard broken granite metal of approved quality from approved quarry mixing with concrete mixture laying manually including hoisting, lowering and laying in layers not exceeding 15 cm thick to the required l

evel, ramming, watering with cost conveyance, royalty and all taxes of materials, cost of labour, T & P and machineries etc curing etc. complete. as directed by the Engineer-in-Charge.

Reinforced Cement concrete M-25 with 20mm size & down graded crusher broken hard granite chips consistent with strength and strengthen cover of concrete of approved quality and from approved quarry mixing with concrete mixture & laying manually including hoisting with and laying concrete in layer not exceeding 15cm in depth to the required thickness and compacting as per the direction of the Engineer-in-charge including rigid or smooth shuttering, chattering, watering and curing for four weeks and finishing the exposed surface smooth with cost, conveyance, taxes and royalties and taxes of all materials, labour T & P, hire and running charges of machineries required for the work, but excluding cost conveyances of M/S.T.S. Rods RCC foundation, footing bases, mass concrete

Plinth Band

BEAM & COLUMN Ground Floor

First Floor

Reinforced Cement concrete M-25 with 20mm size & down graded crusher broken hard granite chips consistent with strength and strengthen cover of concrete of approved quality and from approved quarry mixing with concrete mixture & laying manually including hoisting with and laying concrete in layer not exceeding 15cm in depth to the required thickness and compacting as per the direction of the Engineer-in-charge including rigid or smooth shuttering, chattering, watering and curing for four weeks and finishing the exposed surface smooth with cost, conveyance, taxes and royalties and taxes of all materials, labour T & P, hire and running charges of machineries required for the work, but excluding cost conveyances of M/S.T.S. Rods RCC foundation, footing bases, mass concrete

Plinth Band

BEAM & COLUMN Ground Floor

Second Floor

Reinforced Cement concrete M-25 with 20mm size & down graded crusher broken hard granite chips consistent with strength and strengthen cover of concrete of approved quality and from approved quarry mixing with concrete mixture & laying manually including hoisting with and laying concrete in layer not exceeding 15cm in depth to the required thickness and compacting as per the direction of the Engineer-in-charge including rigid or smooth shuttering, chattering, watering and curing for four weeks and finishing the exposed surface smooth with cost, conveyance, taxes and royalties and taxes of all materials, labour T & P, hire and running charges of machineries required for the work, but excluding cost conveyances of M/S.T.S. Rods RCC foundation, footing bases, mass concrete

Plinth Band

Terrace

Reinforced Cement concrete M-25 with 20mm size & down graded crusher broken hard granite chips consistent with strength and strengthen cover of concrete of approved quality and from approved quarry mixing with concrete mixture & laying manually including hoisting with and laying concrete in layer not exceeding 15cm in depth to the required thickness and compacting as per the direction of the Engineer-in-charge including rigid or smooth shuttering, chattering, watering and curing for four weeks and finishing the exposed surface smooth with cost, conveyance, taxes and royalties and taxes of all materials, labour T & P, hire and running charges of machineries required for the work, but excluding cost conveyances of M/S.T.S. Rods RCC foundation, footing bases, mass concrete

Plinth Band

LINTLE Ground Floor

Reinforced Cement concrete M-25 with 20mm size & down graded crusher broken hard granite chips consistent with strength and strengthen cover of concrete of approved quality and from approved quarry mixing with concrete mixture & laying manually including hoisting with and laying concrete in layer not exceeding 15cm in depth to the required thickness and compacting as per the direction of the Engineer-in-charge including rigid or smooth shuttering, chattering, watering and curing for four weeks and finishing the exposed surface smooth with cost, conveyance, taxes and royalties and taxes of all materials, labour T & P, hire and running charges of machineries required for the work, but excluding cost conveyances of M/S.T.S. Rods RCC foundation, footing bases, mass concrete

Plinth Band

BEAM & COLUMN Ground Floor

Weather coating two coats to the wall with approved shade over a coat of wall primer on new work to give on even shade including cost of weather conveyance, taxes of all materials, labour etc complete.GROUND FLOOR

Reinforced Cement concrete M-25 with 20mm size & down graded crusher broken hard granite chips consistent with strength and strengthen cover of concrete of approved quality and from approved quarry mixing with concrete mixture & laying manually including hoisting with and laying concrete in layer not exceeding 15cm in depth to the required thickness and compacting as per the direction of the Engineer-in-charge including rigid or smooth shuttering, chattering, watering and curing for four weeks and finishing the exposed surface smooth with cost, conveyance, taxes and royalties and taxes of all materials, labour T & P, hire and running charges of machineries required for the work, but excluding cost conveyances of M/S.T.S. Rods RCC foundation, footing bases, mass concrete

Plinth Band

RCC STAIR Ground Floor

CHAJJA Ground Floor

SLAB Ground Floor

Supplying, straightening, cutting, bending, binding, cranking, hooking, and jointing, (if required) the HYSD rod and tying the grills, hoisting and placing in proper position as required for R.C.C. works including cost, conveyance and all taxes of HYSD rod and binding wires of 18 to 20 gauge with cost of labour and T & P required for the work etc. complete in all respect as directed by the Engineer-in-charge.FOUNDATION

GROUND FLOOR

FIRST FLOOR

SLAB Ground Floor

Supplying, straightening, cutting, bending, binding, cranking, hooking, and jointing, (if required) the HYSD rod and tying the grills, hoisting and placing in proper position as required for R.C.C. works including cost, conveyance and all taxes of HYSD rod and binding wires of 18 to 20 gauge with cost of labour and T & P required for the work etc. complete in all respect as directed by the Engineer-in-charge.FOUNDATION

GROUND FLOOR

SECOND FLOOR

SLAB Ground Floor

Supplying, straightening, cutting, bending, binding, cranking, hooking, and jointing, (if required) the HYSD rod and tying the grills, hoisting and placing in proper position as required for R.C.C. works including cost, conveyance and all taxes of HYSD rod and binding wires of 18 to 20 gauge with cost of labour and T & P required for the work etc. complete in all respect as directed by the Engineer-in-charge.FOUNDATION

SLAB Ground Floor

Supplying, straightening, cutting, bending, binding, cranking, hooking, and jointing, (if required) the HYSD rod and tying the grills, hoisting and placing in proper position as required for R.C.C. works including cost, conveyance and all taxes of HYSD rod and binding wires of 18 to 20 gauge with cost of labour and T & P required for the work etc. complete in all respect as directed by the Engineer-in-charge.FOUNDATION

GROUND FLOOR

SLAB Ground Floor

Supplying, straightening, cutting, bending, binding, cranking, hooking, and jointing, (if required) the HYSD rod and tying the grills, hoisting and placing in proper position as required for R.C.C. works including cost, conveyance and all taxes of HYSD rod and binding wires of 18 to 20 gauge with cost of labour and T & P required for the work etc. complete in all respect as directed by the Engineer-in-charge.FOUNDATION

GROUND FLOOR

TERRACE FLOOR

SLAB Ground Floor

Supplying, straightening, cutting, bending, binding, cranking, hooking, and jointing, (if required) the HYSD rod and tying the grills, hoisting and placing in proper position as required for R.C.C. works including cost, conveyance and all taxes of HYSD rod and binding wires of 18 to 20 gauge with cost of labour and T & P required for the work etc. complete in all respect as directed by the Engineer-in-charge.FOUNDATION

GROUND FLOOR

Earth work in all kinds of soil within 30m. Initial lead and 1.5m. Initial lift including rough dressing and breaking clods to maximum 5cm.to 7cm. and laying in layers not exceeding 0.3 m. in depth as per direction of the Engineer-in-charge.Hard soil

SLAB Ground Floor

Supplying, straightening, cutting, bending, binding, cranking, hooking, and jointing, (if required) the HYSD rod and tying the grills, hoisting and placing in proper position as required for R.C.C. works including cost, conveyance and all taxes of HYSD rod and binding wires of 18 to 20 gauge with cost of labour and T & P required for the work etc. complete in all respect as directed by the Engineer-in-charge.FOUNDATION

GROUND FLOOR

Fly ash brick masonry of size 23 cm x 12cm x 8cm having a crushing strength not less than 75 Kg/sq.cm in cement mortar (1:6) in superstructure including splays cutting, circular moulding, chamfering and corbelling, and watering and curing etc. complete including cost conveyance, royalty and all taxes of materials with cost of labour, T & P etc. required for the work complete in all respects as directed by the Engineer-in-Charge.GROUND FLOOR

SLAB Ground Floor

Supplying, straightening, cutting, bending, binding, cranking, hooking, and jointing, (if required) the HYSD rod and tying the grills, hoisting and placing in proper position as required for R.C.C. works including cost, conveyance and all taxes of HYSD rod and binding wires of 18 to 20 gauge with cost of labour and T & P required for the work etc. complete in all respect as directed by the Engineer-in-charge.FOUNDATION

GROUND FLOOR

Fly ash brick masonry of size 23 cm x 12cm x 8cm having a crushing strength not less than 75 Kg/sq.cm in cement mortar (1:6) in F&P including splays cutting, circular moulding, chamfering and corbelling, and watering and curing etc. complete including cost conveyance, royalty and all taxes of materials with cost of labour, T & P etc. required for the work complete in all respect as directed by the Engineer-in-Charge.F&P

SLAB Ground Floor

Supplying, straightening, cutting, bending, binding, cranking, hooking, and jointing, (if required) the HYSD rod and tying the grills, hoisting and placing in proper position as required for R.C.C. works including cost, conveyance and all taxes of HYSD rod and binding wires of 18 to 20 gauge with cost of labour and T & P required for the work etc. complete in all respect as directed by the Engineer-in-charge.FOUNDATION

12 mm thick cement plaster in cement mortar (1:6) over stone masonry finished smooth including watering and curing, cost conveyance royalty and all taxes of materials with cost of labour and T & P etc, required for the work complete in all respect.GROUND FLOOR

SLAB Ground Floor

Supplying, straightening, cutting, bending, binding, cranking, hooking, and jointing, (if required) the HYSD rod and tying the grills, hoisting and placing in proper position as required for R.C.C. works including cost, conveyance and all taxes of HYSD rod and binding wires of 18 to 20 gauge with cost of labour and T & P required for the work etc. complete in all respect as directed by the Engineer-in-charge.FOUNDATION

Fly ash brick masonry of size 23 cm x 12cm x 8cm having a crushing strength not less than 75 Kg/sq.cm in cement mortar (1:4) in superstructure including splays cutting, circular moulding, chamfering and corbelling, and watering and curing etc. complete including cost conveyance, royalty and all taxes of materials with cost of labour, T & P etc. required for the work complete in all respects as directed by the Engineer-in-Charge.GROUND FLOOR

SLAB Ground Floor

Supplying, straightening, cutting, bending, binding, cranking, hooking, and jointing, (if required) the HYSD rod and tying the grills, hoisting and placing in proper position as required for R.C.C. works including cost, conveyance and all taxes of HYSD rod and binding wires of 18 to 20 gauge with cost of labour and T & P required for the work etc. complete in all respect as directed by the Engineer-in-charge.FOUNDATION

Finishing of wall surface of wall with Acrylic wall putty (water based) of approved make and finishing smooth and even surface, to receive painting with all cost of scaffolding slaging, charges with cost of all materials, labour, T&P and all taxesetc complete.GROUND FLOOR

SLAB Ground Floor

Supplying, straightening, cutting, bending, binding, cranking, hooking, and jointing, (if required) the HYSD rod and tying the grills, hoisting and placing in proper position as required for R.C.C. works including cost, conveyance and all taxes of HYSD rod and binding wires of 18 to 20 gauge with cost of labour and T & P required for the work etc. complete in all respect as directed by the Engineer-in-charge.FOUNDATION

Wall painting two coats with plastic emulsion paint of approved shade on new work over one coat of primer with approved primer on new wall surface, completeGROUND FLOOR

Fixing Vitrified tile in dados, skirtings or risers of steps on 12 mm thick cement plaster (1:3) jointed with neat cement slurry mixed with pigments to match the shade of the tiles rubbing and polishing etc. completeGROUND FLOOR

Fixing Granite tile in floors, trade or steps & landing on 19 mm thick cement plaster (1:1) jointed with neat cement slurry mixed with pigments to match the shade of the tiles rubbing and polishing etc. completeGROUND FLOOR

Fixing PVC Doors etc. complete

30 mm thick WPC door shutter

WPC door frame

Supplying all materials, labour and T&P for fitting and fixing white glazed vitreous china porcelain Indian Pan water closet of size 23" of approved make confirming to IS-2556 and top inlet for sinking into floor with 100mm PVC 'P' trap etc. including supply of necessary cement concrete for fitting the closet etc. complete in all respect in all floors including cost, conveyance and taxes of all materials etc. complete and as per PH specification and direction of Engineer-in-charge.

Supplying all materials, labour and T&P for fitting and fixing white glazed vitreous china porcelain European water closets of approved make confirming to IS-2556 and top inlet for sinking into floor with 100mm PVC 'P' trap etc. including supply of necessary cement concrete for fitting the closet etc. complete in all respect in all floors including cost, conveyance and taxes of all materials etc. complete and as per PH specification and direction of Engineer-in-charge.

RCC WALLS & FINS ( Ground floor)

Supplying all materials, labour, T&P and fixing standard sized shower (bath shower) of approved make etc complete including cutting the wall and making good the damages, including cost of all materials complete as per PH specification and direction of Engineering-in- charge.

Supplying all materials, labour, T&P and fixing standard sized CP Bib cock of approved make etc complete including cutting the wall and making good the damages, including cost of all materials complete as per PH specification and direction of Engineering-in-charge.

Supplying all materials, labour, T&P and fixing standard sized 15mm dia Angular Stop cock of approved make etc complete including cutting the wall and making good the damages, including cost of all materials complete as per PH specification and direction of Engineering-in- charge.

Supplying all materials, labour, T&P and fixing standard 15mm sized pillar cock of approved make etc complete including cutting the wall and making good the damages, including cost of all materials complete as per PH specification and direction of Engineering-in-charge.

Supplying all materials, labour, T&P and fixing standard sized two way CP Bib cock of approved make etc complete including cutting the wall and making good the damages, including cost of all materials complete as per PH specification and direction of Engineering-in- charge.

Supplying all materials, labour, T&P and fixing standard sized shower (Health Faucet) of approved make etc complete including cutting the wall and making good the damages, including cost of all materials complete as per PH specification and direction of Engineering-in- charge.

Supplying all materials, labour, T&P and fixing standard sized CP soap Dish holder of approved make etc complete including cutting the wall and making good the damages, including cost of all materials complete as per PH specification and direction of Engineering-in-charge.

Supplying all materials, labour, T&P and fixing standard sized Chromium Plated brass towel rail complete with Chromium Plated brass brackets fixed to wooden plugs with Chromium Plated brass screws as per specification and direction of the Engineer in charge

Supplying all material, labour T&P and fixtures for providing and fixing of stain less steel sink of size600x450x225mm of approved make with its components like 40mm CP waste of cat no ALD 709, 40mm waste pipe etc, including all requisite fixing materials complete as per the PH specification and direction of Engineer-in-charge

Supplying all materials, labour, T&P and fixing standard sized sink cock of florentine single lever quaterturn of approved make complete including cutting the wall and making good the damages, including cost of all materials complete as per PH specification and direction of Engineering-in- charge.

Providing and fixing circular type stainless steel jalli (grating) with hole for floor /nahani trap etc complete as per PH specification and direction of the engineer in charge

Fixing 600x450mm bevelled edge mirror of superior glass mounted on 6mm thick A.C sheet or plywood sheet and fixed to wooden plugs with Chromium Plated brass screws and washers complete as per specification and direction of the Engineer in charge

Supplying all materials, labour, T&P and fixing standard sized glass-shelf with CP brass brackets and guard rails complete fixed to woden plugs with CP screws as per specification and direction of the Engineer in charge

Supplying all materials, labour, T&P and fittings and fixing of Poly Propelene white double layer water storage Tank of approved make confirming to IS 12701-1996 including cutting holes through the tank and fixing mild steel tubes and fittings and providing extra sockets and jam nuts, fixing ball valve etc including hoisting upto terrace level and placing the tank to the required position etc all complete as per PH specification and direction of Engineer-in-charge. (To provided with brick masonary guard walls which will be paid separately) 2000 LTR

Supplying all materials, labours, T&P and fitting and fixing of the following size of CPVC pipe confirming to IS 15778 certification mark with socket and screw joints in walls and floors including supplying of required number of fittings of approved make including cutting threads to pipes and pipes to length, including wastage,etc for fitting to the walls with supply of holder ats, clamps, fixing wooden plugs in walls, including testing of pipe line for water tightness complete as per IS specification including cost, conveyance and taxes of all materials all complete as per PH specification and direction of Engineer-in-charge 15mm dia.

20 mm dia

25 mm dia

32 mm dia

40mm dia

50 mm dia

Providing all materials, labour, Fitting & fixing of CPVC Ball Valve with CTS socket. Make : Prince)25mm Dia

32mm Dia

40mm dia

50mm dia

Supplying all materials,labours,T&P for cutting holes through existing brickwork including making good the damages in cement mortar (1:4) for taking GI pipes and fittings/PVC pipes and fittings etc all complete as per PH specification and direction of Engineer-in-charge.

Supplying all materials,labours,T&P for cutting holes through existing RCC floors & roofs including making good the damages for taking GI pipes and fittings/PVC pipes and fittings etc all complete as per PH specification and direction of Engineer-in-charge.

Supplyng all materials, labour, T&P for construction of brick masonary Gulley trap chamber of size300mm x 300mm with CI gulley trap, by Fly ash brick masonry in CM (1:4), CP (1:6) with 150mm x 150mm CI grating including labour and materials for fitting and fixing 100mm dia square mouth CI gully trap with supply of all jointing materials and encasing the gully trap with a block of CC (1:4:8) with 25mm size hard stone metal all complete with providing and fixing of 250mm x 250mm precast RCC cover slab including cost, conveyance, taxes of all materials to site complete as per the PH specification and direction of Engineer-in-charge.

Providing all materials labour, T&P for making grooves in bricks/stone masonary walls vertically or horizontally up to required depth and width in all floor for laying of pipes and fittings up to 50mm dia, testing the joints with required water pressure and making good the damages with cement concrete 1:2:4 with 12mm size h.g.c.b.chips and finished smooth with cement morter (1:4) to original shape including cost of all materials, curing, conveyance of all materials etc. all complete excluding GST as per specification & direction of Engineer-in-charge.

Supplying all materials, labours, T&P and fitting and fixing of the following size of CPVC pipe confirming to IS 15778 certification mark with socket and screw joints in walls and floors including supplying of required number of fittings of approved make including cutting threads to pipes and pipes to length, including wastage,etc for fitting to the walls with supply of holder ats, clamps, fixing wooden plugs in walls, including testing of pipe line for water tightness complete as per IS specification including cost, conveyance and taxes of all materials all complete as per PH specification and direction of Engineer-in-charge 50 mm dia.

Supplying all materials & labour, T&P and constructing brick masonary chamber for water sluice valve, single air valve & non return valve with Fly ash brick masonary in cement mortar (1:4) as per approved drawing and specification CC (1:4:8) with 4cm size hard granite metal on the bed, 12mm cement plaster (1:6) to inside and cement flush pointing (1:6) to outside surface with 100mm thick RCC M20 cover slab with 20mm hg chips using required quantity of tor steel, centring and shuttering to the slab and dismantling it after 31 days of casting, filling the outside cavity with excavated materials, watering, curing including cost, conveyance, taxes of all materials, labour charges for cutting, bending, binding and tying the grills in proper position etc all complete as per drawing, design and direction of Engineer-in- charge.(Chamber (0.75x0.75x0.7mtr)

Supplying all materials, labour, T&P and fitting and fixing of double air valve of 50mm Dia confirming to the relevant IS specification and dimension including fixing it in position along the pipeline with supply of all required materials such as rubber insertion, nuts & bolts including cost of all materials, taxes, and duties, transportation charges from store to site etc all complete as per the direction of Engineer-in-charge.

Painting two coats with any approved paints over a coat of priming to new wood work and iron works including sand papering, puttying the surfaces with all cost, conveyance, royalty and all taxes of materials including cost of paints and primer, cost of labour and T & P etc required for the work complete in all respect.GROUND FLOOR

Fixing Vitrified tile in floors, trade or steps & landing on 20 mm thick cement plaster (1:4) jointed with neat cement slurry mixed with pigments to match the shade of the tiles rubbing and polishing etc. Complete GROUND FLOOR

Supplying and filling the Foundation & Plinth with clean coarse river sand of approved quality from approved quarry, laying in layers not exceeding 150mm thick, watering and ramming including cost, conveyance, royalty and taxes of all materials, cost of all labour, T&P etc. as required for the work complete as per direction of the Engineer-in-charge.

Providing and laying in position ready mixed M25 grade concrete having compressive strength at 28 days test not lessthan 250kg/sq.cm for reinforced cement concrete work using cement content as per approved design mix etc Foundation

RCC Wall

Cutting,straightening coiled or bent up HYSD/TMT Reinfocement Bars welding or jointing if necessary ,bending, binding,tying the grills as etc

Providing 12mm. thick cement plaster with cement mortar of mix (1:4) in all floors cement and with screened and washed sharp sand for mortar with neat cement punning finished smooth to brick/RCC walls after racking out the joints including watering and curing complete with cost, etc

Providing & applying cement punning over cement plaster

Back filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead upto 50 m and lift upto 1.5m.

Soak Pit Supplying and filling the Foundation & Plinth with clean coarse river sand of approved quality from approved quarry, laying in layers not exceeding 150mm thick, watering and ramming including cost, conveyance, royalty and taxes of all materials, cost of all labour, T&P etc. as required for the work complete as per direction of the Engineer-in-charge.

Providing & laying cement concrete of prop. (1:4:8) in foundation bed and floors using 40mm nominal size down graded, screened, washed hard black crusher broken granite metal of approved quality & from approved quarry including laying in the layers not exceeding 100 mm thick, etc

Providing and laying in position ready mixed M25 grade concrete having compressive strength at 28 days test not lessthan 250kg/sq.cm for reinforced cement concrete work using cement content as per approved design mix etc Foundation

Providing 12mm. thick cement plaster with cement mortar of mix (1:4) in all floors cement and with screened and washed sharp sand for mortar with neat cement punning finished smooth to brick/RCC walls after racking out the joints including watering and curing complete with cost, etc

Fly Ash Brick Masonry in cement mortar of mix (1:6) using Fly Ash bricks of size 25c.m x 12 c.m x 8 c.m in Foundation & Plinth having crushing strength not less than 75 kg per square c.m. with cement and screened & washed sharp sand for mortar after immersing the bricks for 6 (Six) hours in water before use in works with all necessary projections, splays cutting, circular moulding, corbelling, chamfering, watering and curing etc. including cost, coveyance,stacking, loading, unloading, royalties , all taxes ,cost of all labour,Labour cess ,scaffolding, sundries and T&P required for the works etc. complete in all respect as directed by the Engineer-in-charge.

Supplying all materials, la

110mmx110mm 'P' Trap (Make:Astral)

110mmx87.5º Plain bend

110mmx87.5º Door bend

110mmx45º Plain bend

110mm dia single 'Y' withoutdoor

110mm WC connector/Bend with lip ring

110mm Socket plug

110mm Pushfit Coupler

Upvc Tee (150 x 150 x 150)mm

Upvc Elbow

Sinking of 200 mm x150mm size production well through DTH or combination drilling riges in hard rock area with PVC or GI casing pipes. 120mtr depth (1nos) Including 1HP submersible pump Set.

Second

bour, T&P, fitting and fixing uPVC SWR pipes (Type-B)(Co-moulded Ring type) of approved make confirming to IS-13592/1992with ISI marked, both below & above ground level or fixing on wall surface in all floors including transportation & scaffolding etc. all complete as per specification excluding GST & direction of the Engineer-in-charge. Pipe 110mm dia

First floor

Supplying, fitting and fixing of Antiskid Ceramic Floor Tiles in flooring using special plain / printed series Ceramic Floor Tile of premium grade ( having minimum thickness 7 mm to 8 mm & size 300 mm x 300 mm OR 600 mm x600 mm, confirming to I.S 13755 of approved quality and shade in floors, treads on steps and landings on 25 m.m thick bed of cement mortar of mix (1:1) laid in proper slope and gradient with screened & washed sharp etc Ground floor

bour, T&P, fitting and fixing uPVC SWR pipes (Type-B)(Co-moulded Ring type) of approved make confirming to IS-13592/1992with ISI marked, both below & above ground level or fixing on wall surface in all floors including transportation & scaffolding etc. all complete as per specification excluding GST & direction of the Engineer-in-charge. Pipe 110mm dia

First floor

INTERNAL ELECTRIFICATION Recessed wirring to light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLSH/LSZH PVC insulated copper conductor of ISI marked Make- Finolex/Anchor/Polycab/ HAVELLS/RR KABLE/KEI with 20 mm dia PVC non metallic heavy duty conduit FRLS type ISI marked Make-AKG/BEC/Precision/Norpack 6A modular type ( flame retradant type) switch ISI marked Make-Schneider (Zencelo) /legrand( Myrius) /Panasonic (vision)/Eq. and ceiling rose ISI marked of modular type G.I box with metallic cover plate (both side) (flame retradant type) Make-Schneider (Zencelo) / legrand( Myrius) / Panasonic (vision)/Eq. of suitable size, modular box with 1.5 sq. Mm FRLSH PVC insulated single core multistandard copper conductor as earth wire including all accessories and connection as per direction of Engineer -in -Charge. (Group-A)

Group-B

Group-C

Subsequent point of group control

Supplying,fixing of 6A Plug on the separate board with complete fitting by 01 no of 6A switch & socket(modular type)( (anti bactorial & flame retradant type)) with suitable size modular box & cover(anti bactorial & falme retradant type) including supplying of all required accessories of ISI marked as approved as per direction of engg-in-charge..Make-Schneider (Zencelo) / legrand( Myrius) /Panasonic (vision)/Eq. (Maximum 02 nos point in one circuit).

Supplying ,fixing of 6A Plug on the same board in existing switch board with complete fitting by 01 no of 6A switch & socket (modular type)( (flame retradant type)) & other required accessories of ISI marked as approved as per direction of Engg. -in -Charge. Make-Schneider(Zencelo)/legrand( Myrius) /Panasonic (vision) /Eq. (Maximum 02 nos point in one circuit).

Supply and installation of Rubber Mats 8 mm thick

Supplying,fixing of 1x16A Plug on the separate board with complete fitting by 01 no of 16A switch & socket(modular type)( flame retradant type)) with suitable size modular box & cover( falme retradant type) including supplying of all required accessories of ISI marked as approved as per direction of engg-in-charge.. Make-Schneider ( Zencelo ) / legrand ( Myrius) / Panasonic (vision)/Eq. (For equipment power).

b) 2 x 1.5mm2 + 1 x 1.5mm2

c) 2 x 2.5mm2 + 1 x 1.5mm2

d) 2 x 4mm 2 + 1 x 1.5mm2

4 Way(8+12) Way TPN MCB DD DB Horizontal Type as per IEC 61439-3 suitable for Flush mounting and Surface mounting with 100A Copper Bus Bar for each phase, with neutral Bus bar, Earth Bar & Cable ties for cable management, prefitted masking sheet, IP43-IK09 with metal door(but with out MCB/ RCCB/ Isolator)(FOR LIGHT,POWER INDOOR,3-PH,POWER LOAD)

Supplying and fixing 6 amps to 32 amps rating, 240 volts, C series, single poles MCB of Make-LEGRAND/ Siemens/ Schneider /Equievalant model of Havells/C& S/ ABB/Hagar/L&T in the existing MCB DB complete with connections as per direction of Engg.-in-Charge.

Supplying and fixing 6-32Amps DP 240 volts, MCB Make-LEGRAND/ Siemens/ Schneider /Equievalant model of Havells/C& S/ ABB/Hagar/L&T in the existing MCB DB complete with connections as per direction of Engg.-in-Charge.

Supplying and fixing 40Amps 4P 415 volts MCB Make-LEGRAND/ Siemens/ Schneider /Equievalant model of Havells/C& S/ ABB/Hagar/L&T in the existing MCB DB in the existing MCB DB complete with connections as per direction of Engg.-in-Charge.

Supplying and fixing 40Amps 4P 415 volts RCCB 30 mA Make-LEGRAND/ Siemens/ Schneider /Equievalant model of Havells/C& S/ ABB/Hagar/L&T in the existing MCB DB complete with connections as per direction of Engg.-in-Charge.

Fitting & Fixtures S/F. of Superior type Call bell with push & flexible cord.

Supplying, installation, testing and commssioning of 1200 mm sweep white/milky colour BLDC ceiling fan with aluminium blades having wattage not more than 28W and air delivery ≥215m3/min Make-Crompton Energion Groove /Havells Efficiencia Neo/Usha Technix ) including wiring the down rod of standard length (upto 30 cm) with 1.5 sq mm PVC insulated, copper conductor, single core cable etc. as required as per direction of Engg.-in-Charge.

S/F of BLDC Fan regulator.Make:Legrand / L&T / Havells / Anchor / Eq

S/F. of 250mm Sweep Exhaust fans of ISI marked.(Make:-Havells Thrill Air DX / Usha / Crompton / Orient / Bajaj / Halonix/equivalent)

e) 4 x 6mm2 + 2 x 2.5mm2

S/F. of 90Wt. With efficacy of 120lm/W Light emitting diode Street light fittings of Havells/ Crompton/ Bajaj/Philips/Halonix /Panasonic/ Wipro/LT

S/F. of 20Wt.,100lumens/watt efficacacy, aluminium batten Light emi

tting diode Tube light fittings of Havells/ Crompton/ Bajaj/Philips/ Halonix /Panasonic/Wipro/LT

S/F. of 18 Wt.Surface/Recess Mounting LED Down Light of Bajaj/ Havells / Crompton/ Philips/ Panasonic/Wipro/Halonix make.

S/F. of 15 Wt.Surface/Recess Mounting LED Down Light of Bajaj/ Havells / Crompton/ Philips/Panasonic/Wipro/Halonix make.

S/F. of 12 Wt.Surface/Recess Mounting LED Down Light of Bajaj / Havells / Crompton / Philips / Panasonic/ Wipro / Halonix make.

Supply and fixing 3 pin, 5A ceiling rose on the existing junction box/wooden block including connection etc as required.

Lightning Protection Supply of 8 mm Aluminum Round Conductor.Tested as per IEC 62561. as per direction of engineer in charge.Make-OBO/Dehn/Cape

Supply of Roof conductor holder for parapet- Polyamide Conductor holder:With M8 female thread or diameter 7mm, M8 Screw to connect the conductor holder.Weather and temperature resistant from -35 to +90 degree Celsius tested.Conductor holder @ 1 meter distance.Tested as per IEC 62561. as per direction of engineer in charge.Make-OBO/Dehn/Cape

Supply of Polyamide roof cable holder for flat roof: DIN 48829 Form B1. Closed form with bottom. Filling weight 1Kg (frost-resistant concrete). Sleeve from polyethylene, black @ 1 meter distance. Tested as per IEC 62561. Make-OBO/Dehn/Cape

Supply of Connector: For T cross and parallel connectors. Quick installation using hexagonal bolt M10X30 high-grade hot dip galvanised. Tested as per IEC 62561 ( 2nos / expansion piece ).Make - OBO / Dehn / Cape

Supply of 1 mtr vertical air terminal with mounting accessories on the flat surface to meet the requirements of IS/IEC 62305.Tested for Electrical , mechanical and chemical as per IEC 62561. Tested for 100kA lightning current. Make-OBO / Dehn / Cape

Supply of Vertical air terminal with accessories:Providing of Air terminals as per IS-IEC -62305 part-3 Nominal size Ø10/16 mm aluminium rod: 3 Mtr Airterminal: semi-hard (E-AlMgSiO5 corresponds to DIN 48801) Suitable for high wind load. Tested as per IEC 62561. Make-OBO/Dehn/Cape

Supply for Providing of Stand for Fang Fix system 16 kg with base and clamp ,made up of frost resistant concrete and clamp testedupto 100KA lightning current . Make-OBO/Dehn/Cape

Supply for Providing of Stand for Fang Fix system 16 kg made up of frost resistant concrete. Make-OBO/Dehn/Cape

Supply of Test Joint (Folding Clamp) suitable to connect 8mm round conductor and max by 30x3 mm GI strip as specified in drawing and directed by Engineer.Tested for 100kA lightning current. Make-OBO / Dehn / Cape

Supply of IP 66 Poly Propylene Junction Box. Installation at 1Mtr Height For Test Joint .Internal dimensions: 100x100x48 mm Make-OBO/Dehn/Cape

Supply of Galvanised Steel Flat 30X3 mm thickness from earth electrode directly in ground as required. Flat conductor Hot Dipped Galvanized. Tested as per IEC 62561. Make-OBO/Dehn/Cape

Supply for Providing of Cross connector for Flat: Suitable for 30mm Galvanised steel strip. Installed with 4 nos of hexagonal plate. Tested for 100kA lightning current. Make-OBO/Dehn/Cape

Supply of flat conductor holder- Fit: FL 30, With mounting hole 6.2 x 22 mm, With 2 cylinder bolts M6 x 16 and over-piece from hot-dip galvanised steel, Bottom section from polyamide, black. Tested as per IEC 62561. Make-OBO / Dehn / Cape

Supply for Providing of Plastic Corrosion Protection strip: Approx 1.1 mm thick. Width 50mm. Made of petrolatum- coated chemical fibre fabric. Make-OBO/Dehn/Cape

Supply of UL Listed maintenance free ,Low carbon copper coated earth rod of 3 metre electrode having diameter of 17.2mm with copper coating thickness of 250micron tested as per IEC 62561-2 Make-OBO / Dehn / Cape

Supply of universal clamp made of SS to connect rod with flat conductor Make-OBO/Dehn/Cape

Supply of Earth conductivity enhancing mineral compound shall be of 25kg/pit tested as per IEC 62561-7,TCLP tested Make-OBO / Dehn / Cape

Supplying and laying 25 mm x 5 mm CU earth strip ISI marked on surface or in recess for connection etc as required.

Supply of The above arrangements shall be provided with Heavy duty earth champer of 5000kg load bearing capacity to ensure the safety of earthing system Make-OBO/Dehn/Cape

Installation of The above arrangements including all accessories as per Direction of Engg. In charge.

Supply of 35 sq.mm 3 & 1/2 core XLPE Al.Armoured Cable of ISI marked.(Make -Polycab / Havells / KEI / RR Kable / Finolex / Gloster)

Laying and fixing of one number of PVC insulated and PVC sheathed/ XLPE power cable of 1.1 KV grade of size exceeding 25 sq.mm but not exceeding 120 sq.mm direct in ground including excavation, sand cushing, protective covering and refilling the trench etc. as required.

Laying and fixing of one number of PVC insulated and PVC sheathed/ XLPE power cable of 1.1 KV grade of size exceeding 25 sq.mm but not exceeding 120 sq.mm on surface as required.

Supplying and making end termination with brass compression gland and aluminum lugs for following size of PVC insulated and PVC sheathed / XLPE aluminum cable of 1.1 KV as required. (3.5C x 35 sq.mm)

S/F of special earthing complete with 3mtr long 40 m dia G.I pipe , 600x600x3.15mm thick copper plate , charcoal , salt including excavation of earth and filling of loose soil upto ground level including all connection and masonary work.

Supplying installation testing and commissioning of ABC type fire extinguishers of 6 kg capacity confirming to IS:14609 & ABC powder confirming IS:13849 presurized with Nitrozen Gas marked.including cost of all material & labour for all floors & service building etc. all complete. Make-KANEX/FIRE SHILD /SAFEX or equivalent

Supplying, installation, testing and commissioning of Mechanical Foam type 9 litre capacity Fire Extinguisher, ISI marked, IS: 10204, containing 540 ml AFFF liquid ISI marked, IS: 4989 Part II and a polyurethane coated CO2 Gas Cartridge, ISI marked, IS: 4947 complete with gunmetal union cap, nylon hose with plastic foam making branch and wall mounting bracket as per direction of Engineer-in-charge.

Supplying, installation, testing and commissioning of CO2 type Fire Extinguisher 4.5 kg capacity confirming to IS: 2878 made from ISI marked seamless cylinder confirming to IS: 7285, fitted with ISI marked controlled valve confirming to IS: 3224, high pressure 1mtr discharge hose & horn complete with initial gas charged with carrying handle & wall mounting bracket for all floors & service building etc. as per direction of Engineer-in-charge.Make-KANEX/FIRE SHILD /SAFEX or equivalentor equivalent