Repairing and Maintenance at Tubewell No. 1 , 2 and Booster, E Riskhaw Battery and other allied works fall under the jurisdiction of the SDE W/s Sub Division No. 12, CHD

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in: .6.1

Cement mortar 1:4 (1 cement : 4 coarse sand) .6.1.1

Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. .10.25

In gratings, frames, guard bar, ladder, railings, brackets,gates and similar works .10.25.2

12 mm cement plaster of mix : .13.1

1:4 (1 cement: 4 fine sand) .13.1.1

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. .13.8

Distempering with 1st quality acrylic distemper (ready mixed) having VOC (Volatile Organic Compound ) content less than 50 gram/ litre, of approved brand and manufacturer including applying additional coats wherever required to achieve even shade and colour .13.81

Old work (one or more coats) .13.81.1

Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete .13.88

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : .13.99

One or more coats on old work .13.99.1

Finishing walls with water proofing cement paint of required shade : .13.109

Old work (one or more coats @ 2.20 kg/10 sqm) complete. .13.109.2

Renewing glass panes, with putty and nails wherever necessary including racking out the old putty: .14.5

Float glass panes of nominal thickness 4 mm (weight not less than 10kg/sqm) .14.5.1

Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead. .15.56

Providing and fixing enclosed type water meter (bulk type) conforming to IS : 2373 and tested by Municipal Board complete with bolts, nuts, rubber insertions etc. (The tail pieces if required will be paid separately) .18.6

150 mm dia nominal bore .18.60.3

Providing and fixing in position industrial type pressure gauges with gun metal / brass valves complete etc. as required. .E&M DSR 2025 30.8

Providing and Fixing of Exhaust Fan (heavy duty motor with copper wound metallic body )12"size complete in all respect including wiring, exhaust fan to switch borad as per site requirement Make:- Crompton/Phillips/Havell's/Bajaj. .NSR

Size 12" Sweep 900 RPM with louver of Havells make turbo Force SP / Orient make Industrial Heavy Duty / Crompton make EXHD 300-6-1/ Bajaj make Supreme DLX/ Usha make Turbo HDEF only. .

S/I/T/C High Power LED Flood light Luminaries 100 watts of ( Philips/ Wipro/ Bajaj/ LT /Panasonic/ Jaquar/ Trilux/ Havells/ Crompton) make only. The job includes the cost of testing, commissioning and making connection with 3 X 2.5 sq mm. copper wire from adjacent light point , other petty material and labour etc. as required to complete the same to the entire satisfaction of Engineer In Charge Specification of LED fittings.Make:- Orient/Havell's/Crompton/Bajaj/Usha. .NSR

Replacement of E- Rikshaw Battery 135 amp 12 Volts against damage condumn irreparable complete in all respect as per site requirement make Exide, luminous, Sukam, Amaron. .NSR

Replacement of E- Rikshaw controlar against damage condumn irreparable complete in all respect as per site requirement .NSR