8312/E8

Amount

Demolition of brick work or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars etc complete all as specified and directed.

Dismantling posts of any type ( wood, steel or RCC) of any section embedded in concrete including taking out embedded portion and making good disturbed surfaces of ground complete all as specified and as directed.

Dismantling 100mm dia cast iron pipe jointed in cement mortar in foul places including necessary scaffolding upto any height of building including safety measure complete all as specified and as directed.

Dismantling fencing wire mesh any type complete all as specified and as directed.

Demolition of Plain cement concrete (un-reinforced) of any description and in any position not otherwise specifically provided for complete all as specified and directed.

Taking down cement plaster on brick or stone walls etc including racking out joints, hacking for key, scrubbing down with water complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for compleet all as specified and as directed.

Excavation in trenches n.exc 1.5 m wide and n.exc 1.5 m in depth for foundation, etc n exc 10 Sqm on plan and getting out in soft/loose soil complete all as specified and directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 Cm as in soft/loose soil complete all as specified and directed.

Removing excavated material not exc. 50 m and depositing where directed at a level not exc 1.5 m above the starting point complete all as specified and directed.

Material and Labour Plain cement concrete 1:4:8 type D2 (using 40 mm graded crushed stone aggregates) as in foundation, filling and mass concrete as in bed and sides of Gully trap complete all as specified and as directed.

Material and Labour Plain cement concrete 1:3:6 type C2 (using 40 mm graded crushed stone aggregates) as in foundation, filling and mass concrete as in bed and sides of Gully trap complete all as specified and as directed.

Material and Labour Plain cement concrete 1:3:6 type C1 (using 20 mm graded crushed stone aggregates) as in coping and benching of manholes complete all as specified and as directed.

Material and Labour Plain cement concrete 1:2:4 type B1 (using 20 mm graded crushed stone aggregates) as in bed block for embedding agle iron fencing post. complete all as specified and as directed.

Material and Labour Plain cement concrete 1:3:6 type C1 (using 20 mm graded crushed stone aggregates) as in surface channel complete all as specified and as directed.

Material and Labour precast RCC (1:2:4) type B1 (using 20 mm graded crushed stone aggregate) as in cover slabs for manholes / gully traps / drain etc set in cement mortar (1:4) complete including necessary form work complete all as specified and directed including demolition of old unserviceable cover slab. Note: Necessary form work shall deemed to be included in quoted rates.

Material & labour Fly ash Brick work with bricks class designation 7.5, old size, straight or curved on plan exceeding 6 m mean radius built in Cement Mortar 1:6 complete all as specified and as directed.

All as per Item No.17.00 here in before but except bricks complete all as specified and as directed. Note:- Old serviceable bricks obtained from demolition shall be reused.

Supply and fix Mild steel TMT bars 6mm to 8mm dia, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed by Engineer-in-Charge.

Supply and fix Mild steel angle iron work in posts and struts and flat iron in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 complete all as specified and as directed.

Supply and fix Mild steel Framed work as in doors or gates of angle or other section with gusset plate, rails, braces etc complete drill for fixing steel sheeting or other coverings etc including necessary welding, riveting, nut bolting etc complete conforming to Fe-410-W, E-290 complete all as specified and as directed.

Supply and fix 1.60mm thick Mild steel, plain black sheet in steel gates etc cut to size, holes punched, including screws, clout nails, rivets & welding etc complte all as specified and as directed including taking out old unserviceable black sheet.

Supply and fix Galvanised. 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed (each line wire to be measured) including taking down old unserviceable barbed wire complete all as specified and as direcetd.

Supply only PVC coated chain link fencing mild steel galvanised 3mm dia ( minimun weight 3Kg/Sqm) of wire and spacing 75mm x75mm including line wires to any type standards, rails and straining bolts including provision of binding wire complete all as specified and as directed . Note:- Line wires shall be measured and paid separately under relevant items of these schedule.

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provission of binding wire complete all as specified and as directed.

Materials and labour 40 mm thick, plain cement concrete 1:2:4, type B-1(using 20mm graded crushed stone aggregates) as in flooring finishing even and smooth without using extra cement complete as specified and directed.

Supply Only Mild steel 10mm dia round bar including binding with mild steel wire ( annealed) not less than 0.90mm dia complete.

Supply and fixing in Mild steel screw bolts (machine made) & dia of neck 11 to 15 mm , with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, n exc 5cm long complete all as specified and as directed.

Materials and labour 75 mm thick, plain cement concrete 1:4:8, type D-2 (using 40mm graded crushed stone aggregates) as in sub base complete as specified and directed.

Materials and labour 75 mm thick, plain cement concrete 1:3:6, type C-2 (using 40mm graded stone aggregate) as in plinth proction finished the surfaces even and smooth without using extra cement complete as specified and directed.

Supply and Fix Enduara Tiles of size 300mm x300mmx 10mm thick, suitable for hi-turf external tiles, anti skid, scratch resistance and neutral to UV rays and acid/ alkali resistance as in floor over and including 15mm thick cement sand screed bed 15mm thick 1:4 complete all as specified and as directed including dismantling old unserviceable tiles with screed bed.

Supply and Fix Enduara Tiles of size 600mm x600mmx 10mm thick, suitable for hi-turf external tiles, anti skid, scratch resistance and neutral to UV rays and acid/ alkali resistance as in floor over and including 15mm thick cement sand screed bed 15mm thick 1:4 complete all as specified and as directed including dismantling old unserviceable tiles with screed bed.

Material and Labour 16-18mm thick granite(of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms, wall cladding and like in CM(1:4) incl pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including 15mm thick screed bed in CM 1:4 including necessary edge moulding/chamfering (full or half moulding) including dismanteling of old unserviceable stone slab complete all as specified and directed.

Materials and labour for non-skid, ceramic, coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exc 0.11 Sqm but n.exc 0.18 Sqm, in floors etc,set and jointed in neat cement slurry and jointed in white or coloured cement to matcht as on vertical surfaces such as skirtings, dados, risers etc over 10mm thick backing course in CM 1:4 complete all as specified and directed including taking down old unserviceable tiles with screed bed.

Materials and labour Rendering 20 mm thick on brick or concrete surfaces in two layers of 10mm thick each in CM 1:4 and surface finished even and smooth without using extra cement including mixing water proofing compound @2% by the weight of cement complete all as specified and directed by Engr-in-Charge. Note:- water proofing compound shall be measured and paid separately under relevant item of these schedule.

Materials and labour Rendering 15 mm thick on brick or concrete surfaces in CM 1:6 and surface finished even and smooth with using extra cement complete all as specified and directed by Engr-in-Charge.

Materials and labour Rendering 10 mm thick on brick or concrete surfaces in CM 1:4 and surface finished even and smooth without using extra cement complete all as specified and directed by Engr-in-Charge.

Supply only Liquid water proofing compound ( ISI marked) complete all as specified and directed.

Materials and Labour Cement based paint of any colour / tint, two coats over a coat of primer on newly plastered external surfaces including necessary preparation of surfaces complete all as specified and as directed.

Materials and labour Synthetic enamel paint, two coats over a coat of red oxide primer on new steel or iron surfaces over 10 Cm width or girth including necessary preparation of surfaces complete all as specified and as directed.

Materials and labour Concrete bed for 150mm dia pipe in PCC 1:3:6 type C2 ( using 40mm graded crushed stone aggregates.including packing under and haunching against the sides of pipes after they are laid and tested complete all as directed by Engr-in-Charge including deolition of old unserviceable existing concrete bed to drain pipe.

Supply and fix 150mm dia (internal) Stoneware salt glazed drain pipe grade ‘A’ laid in trenches and jointed with cement mortar 1:1 etc. complete all as specified and as directed by Engineer-in-Charge including taking down old unserviceable SGSW pipe.

Supply and fix 110 mm bore, PVC (SWR) pipe, single socketed, in any length with rubber ring joints fixed to wall etc complete all as specified and directed including necessary scaffolding and safety measurements including taking out old unserviceable PVC(SWR) pipe with fittings.

Supply and fix 110 mm bore, PVC (SWR) bends of any radius complete all as specified including scaffolding and safety measure complete all as directed.

Supply and fix 110 mm bore, PVC (SWR) junction single, (Single T) equal or unequal complete all as specified including scaffolding and safety measure complete all as directed.

Supply and fix 110 mm bore, PVC (SWR) junction single Y equal or unequal complete all as specified including scaffolding and safty measure complete all as directed.

Materials and labour Cast iron Nahani / floor trap with grating for 100mm dia of outlet pipe including making good disturbed area/ surfaces with cement mortar 1:3 including taking down old unserviceable one.

Supply and fix 100mm bore cast iron soil, waste and vent pipes,sand cast pipe in any length with or without ears, with cement joints, fixed to walls or floors and disturbed portion of the wall making good with cement concrete in (1:2:4) including distance pieces, plugs, holder bats etc and all as specified and as directed.

Refixing old serviceable cast iron pipe 100mm dia at new or old position with cement joints including necessary scaffolding and safety measure complete all as specified and as directed.

Supply and fix 100mm bore of pipe CI bends (any radius) with duck foot or heel rest bends complete all as specified and directed.

Supply and fix 100mm dia CI Tee, branch piece (any radius) diminishing pieces or tapers in foul places with oval access door including necessary scaffolding upto any height of building including safety measure complete all as specified and as directed.

Material and Labour for applying first coat of cement slurry in sunken floor @ 0.488 Kg/ Sqm mixed with acrylic based polymer modified cementitous composit compound @ 0.253 Kg /Sqm this layer will be allowed to air cure for for 4 hrs & second layer of cement slurry @ 0.242Kg /Sqm mixed with acrylic based polymer modified cementitous compound @ 0.126 Kg/Sqm & this layer will be allowed to air cure for 4hrs followed with water curing for 48 hrs & applying 200 micron thick polythene film paste with help of adhesive shall be provided over treatment & all as specified & as directed by Engr in charge.

Supply and fix in replacement Vitreous China squatting pan of ‘Orissa pattern’, size 580 mm x 440mm (white) with ‘P’ or ‘S’ trap, front or back inlet and foot rests, any pattern complete including provision of PCC bedding and connection to trap, and to flushing pipe, antisyphonage pipe, etc. complete including making good to floor all as specified and directed by the Engr-in-Charge. Make : Hindware Cat part 20042 or equivalent of make as per specified in PS.

Supply and fix in repairs Vitreous china wash down water closet ( padestal pattern) white, with 'S' or 'P' trap ( excluding flushing cistern and flush pipe) including new PVC seat cover and making good disturbed surfaces with concrete as per existing one complete all as specified and directed by the Engr-in-Charge. Make : Parryware Cat part No.C0297or equivalent as specified in PS.

Supply and fixing in repair 10 litre capacity low level PVC flushing cistern (any colour), syphonic action type, with inlet, ball valve, float, handle, fixed with cast iron bracket (of suitable size) and providing 32 mm dia PVC flush pipe and making all necessary connections complete as directed. Make : Parryware Model No C-8090 or equivalent as specified in PS.

Material and Labour for Uprooting of tree from walls of bldgs up to extranded root and spraying of acid of required quantity complete from any location of Bldg up to 4 storied and making good disturbed surfaces with cement mortar (1:4) or cement concrete type C1(1:3:6) using 20mm graded aggregate including necessary scafolding complete for tree of girth up to 5 to 10 CM complete all as specified and directed by Engr-in-Charge.

Cleaning of all debris / vegitation over roof surfaces of accessible or unaccessible roof portion upto any height and the mouth of rain water pipe and around the tanks area and removal of materials outside the MOD land including necessary scaffolding and safety measure complete all as directed by Engineer-in-Charge.

Cleaning of existing 100mm dia sewage line upto 1.50m depth from ground level using jute or PVC nylon rope with knot at one end and other end free passed through the line or by rodding & removing all liquid / semi liquid / solid sludge etc coming in the next manhole is removed complete all as specified and as directed. Note:-(i) Once cleaned the sewage lines, the Contractor shall maintain the lines functional upto the date of Completion at his own cost. (ii) Any damged done by the Contractor during cleaning shall be make good by the Contractor at his own cost upto the satisfaction of Enginner-in-Charge.

Cleaning of existing 200mm dia sewage line upto 1.50m depth from ground level using jute or PVC nylon rope with knot at one end and other end free passed through the line or by rodding & removing all liquid / semi liquid / solid sludge etc coming in the next manhole is removed complete all as specified and as directed. Note:-(i) Once cleaned the sewage lines, the Contractor shall maintain the lines functional upto the date of Completion at his own cost. (ii) Any damged done by the Contractor during cleaning shall be make good by the Contractor at his own cost upto the satisfaction of Enginner-in-Charge.

Cleaning of existing 300mm dia sewage line upto 1.50m depth from ground level using jute or PVC nylon rope with knot at one end and other end free passed through the line or by rodding & removing all liquid / semi liquid / solid sludge etc coming in the next manhole is removed complete all as specified and as directed. Note:-(i) Once cleaned the sewage lines, the Contractor shall maintain the lines functional upto the date of Completion at his own cost. (ii) Any damged done by the Contractor during cleaning shall be make good by the Contractor at his own cost upto the satisfaction of Engineer-in-Charge.

Cleaning of blocked kitchen trap / nahani trap / Water closet of any type / pattern and making the drain channel fully functional by flushing with sufficient quantity of water to entire satisfaction of Engineer-in-Charge including cleaning and removing the waste materials / sludge etc to a distance outside residential area and burying the same in a pit and spreading bleeching powder surrounding the area @ 1Kg/ Sqm and sealing the top with fine sand of suitable depth complete all as specified and as directed. Note:-(i) Cost of earth work in excavation required for digging the borrow pit and burrying the the waste materials / sludge in the borrow pit and sealing the pit with fine sand and spreadind of bleeching powder shall deemed to be included in the rate quoted. (ii) Any damged done by the Contractor during cleaning shall be make good by the Contractor at his own cost upto the satisfaction of Enginner-in-Charge.

Cleaning of under ground sewage pipe line/ covered/ uncovered drain of any type and dia ( cleaning length n.exc 30m from manhole to manhole or from manhole to septic tank) by rodding / bamboo split and taking out waste and foreign materials and flushing with sufficient quantity of water etc. and cutting of the bushes both side of sewage line upto 0.5 mtr each side and throwing the waste materials into non residential area or near by drain / nallahand including cutting the bushes surrounding the sewage line upto 0.50m complete all as specified and as directed. Note:-(i) Once cleaned the sewage lines, the Contractor shall maintain the lines functional upto the date of Completion at his own cost. (ii) Any damged done by the Contractor during cleaning shall be make good by the Contractor at his own cost upto the satisfaction of Enginner-in-Charge.

Lifting of cover and desilting of blocked manhole of any size and depth and removal of sludges in water sealed container outside residential area and washing with adequate quantity of water and refixing the cover in the same location and burying the same in a pit and spreading bleeching powder surrounding the area @ 1Kg/ Sqm and sealing the top with fine sand of suitable depth complete all as specified and as directed by Engr-in-Charge. Note:-(i) Cost of earth work in excavation required for digging the borrow pit and burrying the the waste materials / sludge in the borrow pit and sealing the pit with fine sand and spreadind of bleeching powder shall deemed to be included in the rate quoted. (ii) Any damged done by the Contractor during cleaning shall be make good by the Contractor at his own cost upto the satisfaction of Enginner-in-Charge.

BHASKAR SUPPLY AGENCY

JOY RAM ENTERPRISE

UNIVERSAL TRADING CENTRE

MS HORIZEN

INDIA ELECTRICAL EQUIPMENTS

MS JYOTI INDUSTRIES

ARATI TRADING CO