SPL REPAIR TO EXPLOSIVE STORES HOUSE (ESH) NO P-547 TO P-558 AND PROVN OF TFF PARKING SHED (IRON) AT SASF UNDER AGE B/R-II, ALWAR

Amount

Taking down chowkhat with shutter without taking off shutte from the frame exc 1.5 Sqm and not exc 4 Sqm each complete all as specified and directed.

Taking down chowkhat with shutter without taking off shutte from the frame n exc 1.5 Sqm each complete all as specified and directed.

Demolition lime concrete in any description and in any position not other wise specially provided for complete all as specified and directed.

S&F box type steel ventilator with top hung shutter including hinges, steel peg stay, handle including one shop coat of Zinc Chromate primer complete all as specified.

S&F 3 mm thick sheet glass ordinary quality and glazing with oil putty in square n exc 0.50 Sqm in each pane complete all as specified and directed.

S&F frame work such as grills, gratring etc with ends of bars shouldered &/or riveted or forged into spikes, framed guard bars, barred iron door ladder, frame balusters, walk ways, railing, frame work or water tanks & similar work conforming to Fe-290 Gde E-165 complete all as specified and directed.

M&L framed work as in doors or gates angle or other covering door, cooler stand, hold fast etc to be prepared for handing or sliding with including either hooks and hinges or steel hanging dor fittings (exclusIve of steel or othr covering, running rails and guides) and hanging also fastening and fixing complete conforming to FE-410W Gde E-250.

S&F mild steel black sheet 1.25mm thick fixed with Mild steel frame work for door/gates etc and necessary fixing with screwes/rivets/welding complete all as specified and directed.

Taking down carefully existing lightening conductor, strip etc laying on roof surface and refixing in same position after finishing the work and making good. Note : Any damage occurred during taking down and execution of roof treatment work same shall be deemed to the Contractor. No extra payment will be paid for this purpose.

Demolition of existing lime concrete/PCC padding, roof treatment of any thickness laid over RCC roof/Chajjas etc removing complete layer of bitumen under cocnrete/PCC padding, cleaning and washing of roof with water to remove dust etc as preparation to receive treatment all as directed and specified.

M&L providing cement concrete type B-0, 1:2:4 (using 20mm graded stone aggregate) as in padding on roof and floor complete all as specified & directed.

M&L rendering 15mm thick polymer modified cement mortar 1:3 mixed with latex SBR as per manufacture guidelines including finishing the cement concrete surface even and smooth without extra cement: Liquid of M/S Choksey/STP/Sika/Pidilite as approved by GE. Note : Exact quantity and application process as per manufacture guidelines.

M&L waterproofing treatment by water proofing liquid on roof (AP SMARTCARE DAMP PROOF -1048 ASIAN PAINTS) after proper cleaning of new surface free from dust and applying three coats of damp proof + one coat of damp proof shade (Origami) SPS05061048005 or equivalent complete as per Manufacturer instructions. Note :- (i) Application shall be carried out through authorised applicator of manufacturer only and as per guidelines of manufacturer strictly. (ii) The contractor shall submit the name of authorised applicator, in case manufacturer does not directly do it, from whom he intends to get the work done and get his name approved in writing from GE before commencement of water proofing treatment. After completion of work a certificate shall be obtained by the contractor from the manufacturer about the execution of the work through their authorised applicator & shall be submitted to GE & CTC copy hereof. (iii) The guarantee and warranty from the Manufacturer shall be obtained by the contractor in original for a period of 6 years for the product used and for the purpose of effectiveness of the treatment.

The contractor shall submit same to the GE on a non-judicial stamp paper of the appreciate value for the enforceable guarantee and warranty of the treatment. For the purpose of giving this guarantee and warranty contractor may enter into suitable MOU with the manufacturer. GE shall verified the guarantee and warranty and convey its acceptance in writing and the date of validity of the guarantee and warranty. (iv) All the materials shall be brought directly from manufacturer or their authorised dealers only. (v) A proper record of materials brought at site consumption of materials and balance at site on day to day shall be maintained duly signed by Engineer in Charge. (vi) Original purchase voucher of manufacturer shall be submitted by the contractor to Engineer-in-Charge for entire quantity of materials to be incorporated in the work. (vii) The procurement of material and execution of the work of water proofing treatment shall be got executed from one of the following manufacturer approved by GE :- (a) M/S ASIAN PAINTS – SMART CARE DAMP POOF (b) M/S STP LTD – SHALICRY MHI (c) M/S SIKA INDIA PVT LTD – SIKA COOl COAT (viii) Work will be executed in restricted area.

Demolition of brick work built in cement mortar or cement lime mortar including all quion arches complete all as specified and directed.

M&L brick work with fly ash 'brick (old size brick) straight or curved on plan exc 6m mean radius built cement mortar 1:6 complete all as specified and directed.

M&L15mm thick rendering in cement mortar 1:6 on other than fair faces of brick work surace finished even and smooth with out using extra cement complete all as specified and directed.

M&L providing precast cement concrete (1:2:4) type B1, using 20mm graded crushed stone aggregate as in roof kerbs or mud stops, rounded or chamfered on edges in lintels upto 1.5m clear span,cills, steps, seismic and other similar bands, plinth courses, string courses , lacing courses, parapits and railings upto 60cm in height, copings kneelers, apex stones, bed plates, kerbs, water throughs and the like including weathering slightly rounded or chamfered angles and throating as directed

Taking down cement or cement lime plaster, any description on brick or stone walls,etc including racking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.

M&L15mm thick rendering in cement mortar 1:6 on other than fair faces of brick work surace finished even and smooth with out using extra cement complete all as specified and directed.

M&L 5mm thick rendering in cement mortar 1:4 on ceiling surace rendering is to be even and smooth with out using extra cement complete all as specified and directed

M&L rendering in patches in repairs (n.exc 3 Sqm each patch) 10mm thick in cement mortar 1:4 on fair faces of Brick/stone/concrete surfaces finshing the surface even and smooth without using extra cement complete all as specified and directed.

M&L for Rough cast plaster on exterior walls applying the under coat of cement and sand morrtar 1:3 not less than 10mm thick and while it is still in plastic state the roughcast mixture consisting of crushed stone or fine gravel aggregate (size between 6 to 12mm ) mixed with coarse sand and cement in the raio of 1:1:1 shall be applied and finished even. The mix of cement and sand shall made slightly wetter than normal for rendering to ensure that larger aggregate are thoroughly covered complete all as specified and directed.

M&L preparation of newly plasterd surface of wall and applying three coats of white wash complete all as specified and directed.

M&L preparation of new plastered surface of ceiling and applying three coat of white wash complete all as specified and directed.

M&L preparation of old surface of ceiling and applying one coat of white wash complete all as specified and directed.

M&L preparation of newly plasterd surface of wall and applying two coats exterior emulsion weather coat (Apex) paint over a coat of weather coat primer complete all as specified and directed.

M&L complete removal of existing treatment including cleaning of mortar drops, smoke soot, moulds, moss, efforsecent salt, trading oil grees spots etc using grinding machine on wall surfaces and preparation of old plastered wall surfaces and applying two coats of white wash complete all as specified and directed.

M&L complete removal of existing surfaces of wall by brooming down/scrapping, rubbing/washing including cornices, pilasters etc and applying two coat of weather proof exterior paint (Apex paint) of approved shade/tint over a weather coat primer complete all as specified & as directed. Note : Contactor shall deposit full quantities of approved weather coat exterior emulsion paint to AGE B/R-II stores before start the work.

M&L preparation of new steel surface of any description not exceeding 10cm in width or girth and applying two coats of fire resistent paint a coat of fire proof primer complete all as speified and directed.

M&L writing letters or figures (Block, Roman, Itslic or Indian) n.exc 30cm height with thick synthetic enamel paint complete all as specified and directed.

M&L 50mm thick PCC 1:2:4 type B1 (using 20mm graded crushed stone aggregate) as in floor laid in alternate panels, finishing the cement concrete surface even and smooth with out using extra cement complete all as specified and directed.

Supply only glass dividing strips 3mm thick and 38mm width complete all as specified and directed.

S&F UPVC (SWR) pipes of 110mm bore single socketed in any length fixed to wall incl taking out old u/s PVC/CI pipe with fittings complete all as specified and directed.

S&F UPVC (SWR) bend 110mm bore of any radius complete all as specified and directed.

S&F in repair 110mm stack clamp out of 50mmx 5 mm flat iron and 16 mm dia round iron stays incl bolts and nuts and securing ends of stays to walls or roof etc, complete all as specified and directed.

Excavation in trenches not exceeding 1.50m wide and not exc 1.50m in depth and getting out in hard/dense soil complete all as specified and directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm complete all as specified and directed.

Removing surplus excavated soil to a distance n.exc 50 metre and n exc 100 metre and depositing where directed at a level n.exc 1.5 m above the stafrting point complete all as specified and directed.

M&L PCC (1:4:8) type D-2, (using 40mm graded stone aggregate) in foundation, mass concrete complete all as specified and directed.

M&L RCC work Design Mix (M25) as in foundation including, raft, plinth beam bases for column etc basement slabs under ramed piles and mass concrete complete all as specified and directed.

M&L RCC work Design mix (M-25) as in columns, pillars, piers posts and struts complete all as specified and directed.

M&L TMT bars, 10mm dia and over cut to length, bent to shape required including cranking, bending spirally for hooping for column, hooking ends and binding with and incl MS wire (annealed) not less than 0.9 mm dia complete all as specified and directed.

All as per ser item No 42.00 above but 5mm to 10mm dia as in stirrups, spacers binders etc.

M&L form work to side of concrete foundation, footing, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams and similar work, vertical or to batter complete all as specified and directed.

M&L form work to side of pillar posts struts piers columns etc complete all as specified and directed.

M&L steel work as in tubuler section (in any description) ncluding special shaped washer etc. complete using ERW or induction butt welded tubes conforming to IS 1161-1979 grade St-240 (R) complete all as specified and directed.

S&F plates (Plain or chequered) chanels square cut or notched (ordinary and counter sunk) forming holes, without any attachment complete all as specified and directed.

S&F hand rails, half round, flatsection or other steel section drilled and countershunk for blusters running bars for wind ties, door, balusters including securing bolts, including all necessary drilling, bolting riviting etc & similar work confirming to F-290 Gde E -165 complete all as specified and directed.

M&L mild steel screwe bolts (machine made) 16 to 20mm with hexagonal or square heads at one end and screwed the other, or screwed both ends each screwed end to be fitted with washers and one hexagonal or square nut, exc 22.5cm long but n.exc 30cm long and dia of neck not less than 11mm to 15mm complete all as specified and directed.

S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering /cladding to wall fixed with self tapping screws complete all as specified and directed.

S&F Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering /cladding to wall fixed with self tapping screws complete all as specified and directed.

M&L hardcore of gauge (broken bricks) n.exc 63mm deposited spread levelled in layers n exc 15 cm thick watered and rammed to a true surface with gauze broken boulder exc 90cm complete all as specified and directed.

M&L 100mm thick PCC 1:2:4 type B1 (using 20mm graded crushed stone aggregate) as in floor finishing the cement concrete surface with out using extra cement complete all as specified and directed.

M&L forming 12mm thick expansion joints filled wih preformed biumenious filler and top 20mm mm primed with sealing compound Gde 'B' complete all as specified and directed.

S&F 300mm long mild steel sliding door bolts clip type, stove enameled black, with bright bolt not less than 12mm dia and including a minimum of 06 bolts and nuts, four on bolt plate and two on staple plate and fixed, ISI marked complete all as specified.

S&F butt hinges of size 100mm medium weight, cold rolled mild steel ISI marked complete all as specified.

M/s S Amarjit Singh