Repair and renovation of Sub Centre Building at Dasarathpur including attached quarter under CD-I, Ranat. SW- Renovation of IEI

Amount

Wiring for light point/fan point/exhaust fan point/call bell point with 1.5sqmm FRLS PVC insulated copper conductor single core cable in surface/recessed medium class PVC conduit with piano type switch, phenolic laminated sheet, suitable size M.S box and earthing the point with 1.5 Sqmm FRLS PVC insulated copper conductor single core cable etc. as required.

Group - A

Wiring for light/ power plug with 2X4 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit alongwith 1 No. 4 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing as required.

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required.

2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire

2 X 6 sq. mm + 1 X 6 sq. mm earth wire

Supplying and fixing following piano type switch/ socket on the existing switch box/ cover including connections etc. as required.

5/6 A switch

3 pin 5/6 A socket outlet

Supplying and fixing metal box of 150mm X 75mm X 60mm deep (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in font including providing and fixing 3 pin 5/6 amps socket outlet and 5/6 amps piano type switch, connection, painting etc. as required. (For light plugs to be used in non residential buildings).

Supplying and fixing metal box of 180mm X 100mm X 60mm deep (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including providing and fixing 6 pin 5/6 & 15/16 amps socket outlet and 15/16 amps piano type switch, connection, painting etc. as required

Supplying and fixing of 4way PVC gang Box of 6" X 3.5" size on surface with ISI marks including providing and fixing 2 Nos.3 pin 5/6 Amps PT Socket outlet and 2 Nos. 05/06 Amps PT switch, connection, painting etc. as required.

Supplying and fixing 3 pin, 5 A ceiling rose on the existing junction box/ wooden block including connections etc. as required.

Supplying and fixing call bell/ buzzer suitable for single phase, 230 volts, complete as required.

Installation, testing and commissioning of wall bracket /ceiling fittings of all sizes and shapes containing upto two GLS/CFL/ LED lamps per fitting, complete with all accessories including connections etc. as required.

Installation, testing and commissioning of ceiling fan, including wiring the down rods of standard length (upto 30 cm) with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable etc. as required.

Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required

Supplying and fixing PVC batten/ angle holder including connections etc. as required.

Installation of exhaust fan in the existing opening, including making good the damage, connection, testing, commissioning etc. as required

Upto 450mm sweep

Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator)

8 way , Double door

Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, “C” curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.

Single pole

Supplying and fixing following rating, double pole, 240 V, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.

Providing and laying earth connection from earth electrode with 4.00 mm dia copper wire in 15 mm dia G.I. pipe from earth electrode including connection with copper thimble excavation and re-filling as required

Providing and fixing 4.00mm dia copper wire on surface or recess for loop earthing as required.

Supplying, Installation, Testing and Commissioning of ASHLOK Make SEE brand saf earthing electrode type-19, 50mm dia, length 2 Mtr (short time current- 52.6rms for 1 sec, peak - 125.6) with back fill compound including providing masonary enclosure with cover plate having locking arrangement etc. as required.

Supplying of Surface mounted LED Batten Luminaires with Lamp type 22W LED 6500K, Make: Havells, E-LITE LED PRIDE PLUS/NXT or its equivalent as approved by Engineer - in - Charge.

Supplying of Surface/ Wall mounted bulkhead fitting with P65 protection Make: PHILIPS, VistaGlow Type : WT140W LED7S CW PSU S1 PC or its equivalent as approved by Engineer - in - Charge.

Supplying of Mirror Light 8W LED surface/wall mounted LED batten luminaires, Make: POLYCAB, Model: INTENSO LXS LED BATTEN 8W or its equivalent to ISI as approved by Engineer - in - Charge.

Supplying of 5 star, 26W (BLDC Type) energy saving A.C Ceiling fan (1200mm sweep) for operation of 230V, with all accessories etc as required. Make:-Havells. Model : Efficiencia DX BLDC Color: White or Equivalent as approved by EIC.

Supplying of Exhaust Fan 250mm Sweep (Non Mettalic Type) with all accessories etc as required.Make: Havells, Model: Thrill Air-DX White or its Equivalent to ISI as approved by EIC.

Supplying & fixing of 10W LED lamps with light output of 950 lumen Make:- Havells or its equivalent to ISI .

Supplying and fixing T.W Board of 250mm x 300mm x 60mm deep(nominal size) on surface for installation of Energy meter as required.

DAYAL HALDER (BID ID -45827)

Biswajit Sarkar (BID ID -45946)

SARAVANA TRADING COMPANY (BID ID -45958)

M/s G K Construction (BID ID -45940)

M/s Mani Enterprises (BID ID -45937)