Special repair works to 1 No. of INS, 1 No. of SI and 12 Nos. of PC/HC Quarters at Thirunavalur in Kallakurichi District.

Amount

30 : Ellispattern

37.1 : White washing 3 coats (slaked)

51.1: Supply and erection of Rotational Moulded Polyethylene water storage tanks (HDPE Cylinderical vertical type) for outdoor use having capacity of 700 litres

52 : PVC Water supply (ASTM) a. 32 mm dia

b. 25 mm dia

52.1 : Supplying and fixing of 20mm dia "B" Class GI pipe for Hot water line (Fully Concealed in walls)

Electrical arrangements 74 : Charges for fixing of "Fan"

81 : Meter cupboard

112 : S & F of Exhaust Fan 300 mm dia

ANNEXURE-I 10.5.1 : Brick partition work in C.M. 1:4 using Kiln Burnt Country bricks of size 22 x 11 x 7 cm (8 3/4" x 4 1/4"x 2 3/4") 110 mm tk (B.P.) (using crushed stone sand) with admixture a. In Foundation and Basement

14.1.1.I : Precast Cupboard slab 20 mm tk using standardised concrete mix M20 grade.(using crushed stone sand) a. In Ground floor

b. In First floor

c. In Second floor

14.1.1.II : Precast cupboard slab 40 mm tk using standardised concrete mix M20 grade.(using crushed stone sand) a. In Foundation & basement

16.1.2: Precast Jally Ventilator 50mm thick. Using standardised M20 grade concrete Mix. (using crushed stone sand) a. In Ground Floor

b. In First Floor

c. In Second Floor

21.5.2 : Supply and fixing Solid UPVC door shutter with frame

23.2.1 : 4mm thick pin headed Glass panels with Aluminium beedings

28.1 : Floor plastering in C.M. 1:4, 20 mm tk. (using crushed stone sand) with plasticizer

29.8.1 : Glazed tiles using Grout (Tile Joint Filler) (using crushed stone sand)

29.9.1 : Floor ceramic tiles using Grout (Tile Joint Filler) (antiskid) (using crushed stone sand)

32.1.1: Finishing top of roof with one course of Hydraulic Pressed Tiles of approved superior quality of size 23cmx 23cmx20mm thick laid over weathering course in cm 1:3 (One of cement and three of crushed stone sand) 12mm thick mixed with Water proofing compound at 2%

33.1 : Plastering in C.M. 1:5, 12 mm tk. (using crushed stone sand) with plasticizer

35.1.2 : Spl. Ceiling plastering in C.M. 1:3, 10 mm tk. (using crushed stone sand) with plasticizer

38.6 : One coat white cement for new walls and other similar works.

38.7 : Plastic Emulsion PAINT including primer for inner walls

43.1 : Supply & Fabrication of Mild steel / RTS grills (without cement slurry) for all sizes of rods.

44.6 : PVC SWR 110 mm dia with ISI mark type- A for Rain water down fall pipe

50.6.1 : Precast slab 50 mm tk.in C.C. 1:3:6 with fibre (using crushed stone sand)

53.5.2 : Wash Hand Basin of size 550 x 400 mm (white without pedestal)

54.1.1 : S & F of 15mm dia half turn CP long body tap

54.2.1 : S & F of 15mm dia half turn CP short body tap

56.4.2: S&F of Indian Water Closet white glazed (Oriya type) of size 580 x 440mm with PVC SWR grade P' or "S' trap - Other than G.F. (using crushed stone sand)

58.3 : PVC SWR pipe (Soil line) with ISI mark - type 'B'. a. 110 mm dia.

b. 75 mm dia.

58.4: Supplying, Laying & Concealing the 50mm dia PVC ( SWR) pipe with ISI mark type - 'B' with relevant specials.

61.3 : UPVC Non Pressure pipe of SN8 SDR 34 (S 16.5) as per IS 15328/2003 a. 110 mm UPVC Non Pressure pipe

75.1.2 : Supply and delivery of 48" (1200 mm) Fan with ISI mark with Eletronic Dimmer

77.5 : Run of 2 Wires of 1.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990.

211.2: Clean removal of the old cement plastering both inside and outside from the existing walls of brick masonry without damaging the existing structure and surroundings and clearing the debris away from the site including cost of required tools and plant and necessary scaffolding if necessary etc., all complete in all respect and as directed by the departmental officers.

218: Dismantling the damaged pressed tiles in cement mortar without affecting the adjacent structures in all floors including the cost of required tools and plants and clearing the debris away from the site etc., all complete and as directed by the departmental officers.

243: Dismantling the existing floor finish and dadooing walls in cement mortar with Mosaic Tiles / Glazed Tiles / Cuddapah Slabs without damaging the existing structure and surroundings and clearing the debris away from the site including cost of required tools and plant etc., all complete in all respect and as directed by the departmental officers.

799 : Two coats of OBD over one coat white cement for inner walls

ANNEXURE - I A1: Painting the old walls with two coats of oil bound distemper of approved brand over the thorough scrapped wall surfaces including scrapping.

A2: White washing two coats for old walls using clean shell lime slaked

A3: Painting the old wood work with two coats of approved Ist class synthetic enamel paint including clean removal of old paint using sand sand paper as required by the departmental officers including cost of paint, brushes labour charges etc., all complete as directed by the departmental officers. (The quality and the shade of paint should be got approved by the Executive Engineer before use) complying with relevant standard specifications.

A4: Painting the old Iron work and other similar works such as steel windows ventilators and grills with two coats of approved Ist class synthetic enamel ready mixed paint of approved quality and brand, through scrapping including cost of paint, brushes labour charges etc., complete. (The quality and the brand of paint should be got approved by the Executive Engineer before use) complying with relevant Standard specifications.

A5: Painting two coats for old walls with ready mixed plastic emulsion paint of first class quality paint of approved colour and shade for outer wall and other similar works including thorough scrapping and without priming coat

A6: Pointing the top of Pressed tile roof with CM 1:3,12mm thick with waterproof compound 2% of cement to the existing roof including cost of all necessary groove cutting and finishing etc, complete.

A7: Removing and repairing to existing panelled door of size 1.20 x 2.10 including supplying and fixing of 1 No of door handle with CP screws 3 Nos 5" butt hinges, 2 No 6" x 1/2 tower bolt, 1 No 10" x 5/8" aldrop, 1 No Nylon bush 1 No of door stopper and fixing in position etc., all complete.

A8: Removing and repairing to existing plywood door shutters including required door specials & materials and labour charges for fixing in position etc., all complete.

A9: Removing and repairing to existing PVC door shutters including required door specials & materials and labour charges for fixing in position etc., all complete.

A10: Repair works to the existing grill doors Windows including welding charges, welding machine & other materials, cost of labour charges etc., all complete.

A11: Supplying and fixing of following electrical special of suitable size & best approved quality etc a) Stepped Electronic 300W / 450W Square Type Fan Regulator

b) 5 Amps (Flush Type) switchs

c) Hylem Sheet 3mm thick

d) Battern holder for Lamp

e) 5 Amps 3 Pin & 2 Pin Combined Flush Type Wall Socket only

f) Ceiling Rose

g) Call/Bell/Buzzer 6mm suitable for AC/DC

A12: Cleaning the existing septic tank such as sewage waste and liquid using 5000 litres capacity tank vehicles and disposing the same away from the site including hire and conveyance charges for the vehicle, labours all tools and plants employed there of as directed by the departmental officers.

A13: Supplying and fixing of 25W LED street light with necessary fittings (superior variety) Can be fitted in outside wall with 1320 lumens of light output (110 lumens/watt), which works in 230V AC at 50 HZ with power factor more than 95% and also with optical efficiency of 95% thermal efficiency of 92% and overall electrical efficiency of 94% etc.

A14: Supplying and fixing of LED blubs suitable for fixing it to pendent / bakelite battern holder of best approved variety a) 9 watts LED bulb

A15: Supplying and fixing of 4 feet 18watts LED tube light with ISI mark including cost of materials and labour fixing etc

A16: Labour charges for recoiling, assembling and fixing of existing ceiling fan of different sweep with necessary connections and fixing of fan regulator on the existing board etc., all complete.

A17: Supplying and fixing of water tight 12 W Bulk head fittings with guard,

A18: Dismantling the damged IWC including floor tiles, PCC, weathering course with IWC without affecting the adjcent structure in all floors including the cost of requried tools and plants and clearing the debris away from the site etc

A19: Charges for PVC tank removing and refixing, cleaning work using washing materials and labour charges etc., all complete and as directed by the departmental officers.

A20: Hire charges for deploying earth moving machinery (JCB/Poclain) for earthwork including diesel, oil and labour charges etc., complete.

A21: Acid washing the existing toilet floor tiles, wall tiles to make it dirt free including cost of materials and labours etc., all complete and as directed by the departmental officers.

A22: Labour Charges for chipping the spallen and old concrete of the cloumns beams and lintels adhering particles using wire brushes packing the RCC surface and make the beam, Columns for the application of repair Mortar/Micro Concrete ect.,,

A23: Providing two legged scaffolding using 15cm diameter casurina prpos or best quality bamboo posts of 4m overall length etc. c) 10.5m height in addition of 2.5m ht.

A24: Supply and delivery of 3 HP openwell submersible pumpset as per IS 14220/2002 without panel board. The motor should be confirming to relevant IS specification with ISI mark suitable for open well for the following duty condition: 50 x 75 Lpmxm

A25: Supplying and Delivery of following Dia GI , GM , CI , PVC, UPVC and MS SpecIals of best and approved quality having ISI mark including cost of specials and delivery at site of work etc., all complete and as directed by the departmental officers. a) 32mm dia UPVC ball valve

b) 25mm dia UPVC ball valve

A26: Supplying and fixing of PVC water storage tank cover lid for 700 lit capacity including cost of conveyance, labour charges for fixing etc., all complete and as directed by the departmental officers.

A27: Providing one coat of Fosroc Nitocote AW primer and Two coats of Fosroc Brushbond roof guard high fibre reinforcement acrylic single component water proofing coating over the primer surface area ones dries up one after another coat complete neat finish for pressed tiles etc., all complete and as directed by the departmental officers.

A28: Providing Nitozinc primer zinc rich epoxy based primer over the prepared reinforcement bars after mixing the base and hardner mechanically using heavy duty slow speed stirrer and applying the same using bristle brush to ensure an unbroken coatings etc., complete in all respects and as directed by the departmental officers.

A29: Providing one coat of rust removal and cleaning the rod using reebaklens RR including labour charges for applying and cost of all materials etc., all complete and as directed by the departmental officers.

A30: Providing and fixing of new rods in place of damaged rods using lockfix range of polyester resin based chemical anchors complete in all respects and as directed by the departmental officers.

A31: Supply and removing the existing damaged following plumping items with ISI mark and approved make including all cost etc., all complete and as directed by the departmental officers. a. 15mm CP Angle Valve

b. 15mm CP Angle cock

A32: Grouting and pointing using cement, grout including labour charges and cost of all materials etc., all complete and as directed by the departmental officers.

SSV DEVELOPERS (BID ID -1070478)