8825/TOKEN-117/2025-26

Cleaning of existing chocked/ blocked sewage lines of 150mm bore, of any description and in any position by taking out loose sediment sand, girt, ash, sludge water, rags, fibre or vegetation from the sewage line to any depth from GL including removal of sludge/debris outside of MD L and in such a manner that there shall be no nuisance and no unhygienic environment at the place of disposal complete all as specified and directed

Cleaning of existing chocked/ blocked sewage lines of 200mm bore, of any description and in any position by taking out loose sediment sand, girt, ash, sludge water, rags, fibre or vegetation from the sewage line to any depth from GL including removal of sludge/debris outside of MD L and in such a manner that there shall be no nuisance and no unhygienic environment at the place of disposal complete all as specified and directed

Opening and cleaning of blockage of kitchen/bath traps or WC any pattern and in any position by rodding, manually or mechanically upto 1st manholes as directed by Engr-in-charge and as on required basis) complete all as specified and directed. Work should be carried out in G-5 storey building.

Cleaning of blocked manhole of any description and in any position depth n exc 1.5 m deep mechanically or manually by taking off sludge waste /night soil and silted soil from the existing manhole of any size collecting and removal of sludge in sealed container out of the cantonment area in such a manner that there shall be no nuisance and no unhygienic environment at the places of disposal area complete all as specified and directed.

Cleaning of blocked manhole of any description and in any position depth exc 1.5 m but n exc 3m deep mechanically or manually by taking off sludge waste /night soil and silted soil from the existing manhole of any size collecting and removal of sludge in sealed container out of the cantonment area in such a manner that there shall be no nuisance and no unhygienic environment at the places of disposal area complete all as specified and directed. Note :- For execution of item from Srl No 01 to 05 above Agency should deploy minimum of 05 Nos Safaiwala on all days of the month/year during the contract period including Sunday and Holidays so as to complaints are attended promptly within 02 hours so that health and life of troops and their families may not be adversly affected.

Excavation in trenches n.exc. 1.5m wide and n.exc 1.5 m in depth for foundation for laying /taking down sewage / water supply lines , forming bottom surfaces to required slope & gradient and n.exc 10sqm on plan and n 'exc 1.5 m in depth and getting out in soft/loose soil complete all as specified and directed.

Excavation in trenches n.exc. 1.5m wide and exc 1.5 m & n exc 3m in depth for foundation for laying /taking down sewage / water supply lines , forming bottom surfaces to required slope & gradient and n.exc 10 sqm on plan and getting out in soft/loose soil complete all as specified and directed.

Demolition and breaking up drain pipes (glazed stone ware, AC or reinforced concrete),150 mm dia pipe of any description and in any position set and jointed in cement mortar complete all as specified and directed by Engr-in-Charge

Demolition and breaking up drain pipes (glazed stone ware, AC or reinforced concrete),200 mm dia pipe of any description and in any position set and jointed in cement mortar complete all as specified and directed by Engr-in-Charge

Demolition and breaking up drain pipes (glazed stone ware, AC or reinforced concrete),300 mm dia pipe of any description and in any position set and jointed in cement mortar complete all as specified and directed by Engr-in-Charge

S&F DWCPE(SN8) 150mm dia (Internal Dia) pipes,snap fit coupler and rubber ring incl testing and laid and properly jointed laid in trenches to a level on concrete bed complete all as specified.

S&F DWCPE(SN8) 200mm dia (Internal Dia) pipes,snap fit coupler and rubber ring incl testing and laid and properly jointed laid in trenches to a level on concrete bed complete all as specified.

S&F DWCPE(SN8) 300mm dia (Internal Dia) pipes,snap fit coupler and rubber ring incl testing and laid and properly jointed laid in trenches to a level on concrete bed complete all as specified.

Demolition of brick work built in cement mortar incl all quoins, arches, pillars etc complete all as specified and as directed.

M&L Burnt bricks work with whole kiln burnt well burnt old size bricks built in CM 1:4 in walls straight on plan/ exceeding 6 mtrs mean radius complete.

M&L for rendering 15mm thick in cement mortar (1:4) on concrete/ fair surfaces of block masonry, finished even and smooth without using extra cement with and including mixing water proofing compound as per manufacturers instructions complete all as specified and as directed by Engr-in-Charge. Water proofing compound shall be measured and paid for separately under appropriate item of Sch "A' as supply only on requirement basis.

M&L for PCC 1:2:4 type B0 (using 12.5 mm graded stone aggregate) as in coping exposed surfaces finished even and smooth using extra cement including necessary form work complete all as specified and directed by Engr-in-Charge.

Demolition of RCC manholes covers of any description and in any position including removal of debrish at site complete all as directed by Engr-in-Charge

S & F for precast plastic fibre reinforced cement concrete Manhole cover including grove and hook arrangement for lifting and placing in position and sides covered by MS sheet medium duty of overall Size 1000mmx500mm & 75 mm thick complete all as specified and as directed.

S & F for precast plastic fibre reinforced cement concrete Manhole covers with frame medium duty of overall size 450mmx450mm & 50mm thick factory made (make-polycrete) all as specified and directed by Engr-in-Charge.

Returning ,filling in including spreading levelling watering and well ramming in layers not exc 25cm thick in soil in any depth complete all as specified and directed by Engr-in-Charge

Removing excavated soil/ materials to a distance not exc 50 mtr and depositing where directed at a level not exceeding 1.50 m above the starting point complete all as directed by Engr-in-Charge

M&L for PCC (1:4:8) type D2 using 40mm graded stone aggregate as in foundation of manholes, mass concrete etc. complete all as directed by Engr-in-Charge

M & L Cutting into existing manholes for connecting new drains making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete (1:2:4) type B-1) smooth finished, and reforming benching as required for 150 mm dia of pipe

M & L Cutting into existing manholes for connecting new drains making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete (1:2:4) type B-1) smooth finished, and reforming benching as required for 225 mm dia of pipe

Supply only water proofing compound all as specified and directed.

Mechanically used high pressure Super Sucker Machine capable of Air lifting of dense sludge like muds, slurry, small stones, debries, grits etc from sewer lines/Manholes thorough vaccum mode and capable of Jetting sewer lines of any dia. The machine shall be used by the contractor as per direction of Engineer-in-Charge as on required basis. Job shall be completed to the entire satisfaction of GE..( For Arjan Vihar Area )

Demolition of cement concrete in ground floors and paving n exc 15cm thickness (below or above GL)

M&L for 75mm thick PCC type C2 1:3:6 using (40mm graded aggregate) as a leaveling course Complete all as specified and as directed.

Material and labour Machine pressed precast concrete rubber moulded interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade complete all as specified and directed.

M&L sand filling under floors or in foundation including watering and consolidation

M&L for Factory made cement concrete prepolished rouber moulded coloured chequered tiles 300x300 x20 to 25 mm thick complete all as specified & directed.

Screed bed or bedding layer of mortar 20mm thick for laying floor finishes in CM 1:6

Material and labour Machine pressed precast concrete rubber moulded interlocking paver block any shape and size confirming to IS 15658-2006 of 80 mm thickness, M-40 Grade complete all as specified and directed.

M&L PCC type C-1 (1:3:6) as in surface channel and drain Complete all as specified and directed

M & L Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complet complete all as specified and directed

M&L for PCC 1:2:4 type B 0 (using 12.5 mm graded stone aggregate) as in coping haunching benching finished even and smooth using extra cement including necessary form work complete all as specified and directed by Engr-in-Charge.

Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete , using extra cement , including forms , moulds , mitred / stopped ends etc. complete all as specified and directed.

Taking down cement plaster of any description and in any position of brick or stone wall/concrete surfaces on walls ,ceiling etc including raking out joints ,hacking for key scrubbing down with water etc & prepared to receive new plaster complete all as specified and directed

M&L rendering 15 mm thick in CM 1:4 on brick/concrete wall surfaces of any description, and finishing the surfaces even and fair without using extra cement complete all as specified and directed .

M&L for preparation of newly plastered surfaces of walls & applying 2 coat of cement base paint over a coat of alkali resistant primer complete all as specified and directed.

Material & Labour preparation of newly plastered surfaces of walls & applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces. Complete all as specified and as directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed

S & F in repair Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240 complete all as specified

S&F in repairs pre painted galvalume aluminum ZINC coating GI base corrugated steel 0.5mm thick of any colour having tensile strength of 550 MPA as in roof covering/cladding to wall fixed with self tapping screw with minimum 150mm end lap and one corrugation side lap including dismantling the existing any type of sheets complete all as specified and directed.

S & F in repair 2mm thick Fibre glass reinforced translucent corrugated sheeting with two corrugations side lap fixed with coach screw and washer in roof, wall etc

M&L preparation of new steel and iron surfaces of any description over 10cm width or girth not otherwise described and applying two coats of synthetic enamel paint over a coat of redoxide primer, complete all as specified.

Dismantling post or struts (wood , steel or RCC) of any section any description and in any position including taking out embedded portion in natural ground and making good the disturbed surfaces to match with existing surfaces complete all as specified and directed

Dismantling post or struts (wood , steel or RCC) of any section any description and in any position including taking out embedded portion in concrete, brick work, masonry etc and making good the disturbed surfaces to match with existing surfaces complete all as specified and directed

Dismantling chain link fencing of any type fixed in any situation including flat iron MS round bars, mounted on nuts & bolts etc complete all as specified.

Excavating in post holes (or similar holes) each not exceeding 0.50 cu m, getting out, returning,filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm in soft/loose soil complete all as specified.

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provission of binding wire

Supply only Chain link MS galvanisd fencing, any size or type

M&L for mild steel works as in angle iron posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including al necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed.

Supply of Fe 410-W Gde -E- 250 quality (A) Mild steel in flat, round or square bars, in available lengths.

S&F Mild steel screw sbolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed ene to be fitted with washers and one hexagonal or square nut, exc 5cm long but n.exc 10cm long and dia of neck 11mm to 15mm complete all as specified and directed.

M&L for PCC (1:3:6) type C-2 using 40mm graded stone aggregate as in foundation filling and mass concrete complete all as specified and directed.

Surfaces of any description, n.exc 10cm in width or girth when unconnected with other painting or when painted in a different tint

M & L for providing precast reinforced cement concrete jallies 40 mm thick including all mouldings type B-0 1:2:4(12.5mm graded stone aggreagte) set in cement mortar 1:4, complete all as specified.

Providing precast cement concrete type B-1 (1:2:4) in window or door cills, lintels,bressumers, steps,quoin blocks (foruse with ma sonry), stringcourses, copings.kneelers, apexstones, pier caps,columns, posts,boundary pillars,bed plates, pintleblocks, ancho-rageblocks, bonders(for stone walling).corbels, brackets,etc. (of any sectionindicated), with plain fair faces,including cham fers, weatherings,throat- ing etc. and setting in mortar 1:4 complete with joints to match

Schedule of Credit