REPAIR/REPLACEMENT MAINTENANCE OF STEEL FURNITURE ITEMS INCLUDING PAINTING POLISHING AT BSO YARD UNDER GE 860 EWS

Amount

Almirah Large Steel : Drg No. FD-67(M), FD-350/351/1031/ 1033

(a) S&F in repairs legs of Almirah Large steel and providing new by welding made out of 1mm thick MS Sheet duly welded including preparation of surface into required shape for almirah large steel, rest all as shown on drg and as directed by Engr-in-Charge.

(b) S & F in repairs locking device including replacement of brass 6 lever locks Make-Godrej iron body with duplicate keys chromium plated to Almirah large steel , rest all as shown on drg and as directed by Engr-in-Charge.

(c) S&F in repairs Stainless steel handle of size 150 mm grip length with both sides screwed to Almirah large steel , rest all as shown on drg and as directed by Engr-in-Charge.

(d) Repairs to door as specified including replacement of hinges all as shown on drawing and as directed by Engr-in-charge

(e) S&F in repairs shelves for Almirah Large steel with MS sheet CRC 1mm thick bent to shape including welding to the almirahs, rest all as shown on drg and as directed by Engr-in-Charge.

(f) S & F in repair MS Clamp for proper fixing & readjustment of shelves of Almirah Large steel with shelves as directed by Engr-in-charge.

(g) Repair to existing shelf including welding

(h) M & L for welding of broken joints of Almirah steel large with shelves continuously 50mm to 75mm long for smooth finish through gas welding including preparation of surface and applying two coat of Synthetic enamal paint over a coat of red oxide primer to match with the existing shade etc complete all as specified and as directed by Engr-in-charge.

Almirah Medium / Small Steel : Drg No. FD-243 FD-1032, FD-1034

(a) S&F in repairs legs of Almirah Medium/Small steel and providing new by welding made out of 18 gauge MS Sheet into required shape for almirah medium/small steel , rest all as shown on drg and as directed by Engr-in-Charge.

(b) S & F in repairs locking device including replacement of brass 6 lever locks Make:-Godrej iron body with duplicate keys chromium plated to Almirah Medium/Small steel , rest all as shown on drg and as directed by Engr-in-Charge.

(c) S&F in repairs Stainless steel handle of size 150 mm grip length with both sides screwed to Almirah large steel , rest all as shown on drg and as directed by Engr-in-Charge.

(d) Repairs to door as specified including replacement of hinges all as shown on drawing and as directed by Engr-in-charge

(e) S&F in repairs shelves for Almirah Medium/Small steel with MS sheet CRC 1mm thick bent to shape including welding to the almirahs, rest all as shown on drg and as directed by Engr-in-Charge.

(f) Repair to existing shelf including welding

(g) M & L for welding of broken joints of Almirah Medium/Small steel continuously 50mm to 75mm long for smooth finish through gas welding including preparation of surface and applying two coat of Synthetic enamal paint over a coat of red oxide primer to match with the existing shade etc complete all as specified and as directed by Engr-in-charge.

Locker Bed Side Steel : Drg No. FD-1029

(a) S&F in repair to leg made out of 18 guage MS Sheet complete including preparation of surface & applying two coats of synthetic enamel paint over a coat of red oxide primer to match with existing shade etc complete, rest all as shown on drg and as directed by Engr-in-Charge.

(b) S&F in repair to MS butt Hinges 75mm long all as shown on Drg and as directed by Engr-in-charge

(c) S&F in repair to Stainless steel Handle 100mm long all as shown on Drg and as directed by Engr-in-charge

(d) S&F in repair to Chromium plated Hasp & Staple of size 75mmx40mmx3mm all as shown on Drg and as directed by Engr-in-charge

(e) M & L for welding of broken joints of Locker Steel including preparation of surface & applying two coats of smoke gray/Olive green synthetic enamel paint over a coat of red oxide primer complete, rest all as shown on drg and as directed by Engr-in-Charge.

Table Office Officer Steel : Drg No. FD-84/ 1003

(a) S&F in repairs drawers made of 20 gauge MS Sheet duly finished with standard workmanship for Table Office Officers Steel including preparation of surface & applying two coats of synthetic enamel paint over one coat of red oxide primer to match with existing shade etc complete, rest all as shown on drg and as directed by Engr-in-Charge.

(b) S&F in repairs top of Table office officer steel top with 18mm thick prelaminated particle board exterior grade of approved make one side teak facing and balancing white on other side all the four edges provided with 4mm thick first class teak wood beading, rest all as shown on drg and as directed by Engr-in-Charge.

(c) S & F MS Lock (6 liver brass levers) Make:-Godrej with duplicate keys for drawers, rest all as shown on drg and as directed by Engr-in-Charge.

(d) M & L for repair including welding and replacement of heavy duty spring with new as per existing locking device to make functional for smoothly play of drawers in its original position, rest all as shown on drg and as directed by Engr-in-Charge.

(e) Leg Made out of square pipe 25mm square pipe having wall thickness 1.6mm including preparation of surface & applying two coats of synthetic enamel paint over two coats of red oxide primer complete, rest all as shown on drg and as directed by Engr-in-Charge.

(f) Hard Rubber/PVC toe of superior quality as approved & as directed by Engr-in-charge.

Table Office Clerk Steel : Drg No. FD-84 / 381 FD-1004

(a) S&F in repairs drawers made of 20 gauge MS Sheet duly finished with standard workmanship for Table Office Clerk Steel including preparation of surface & applying two coats of synthetic enamel paint over a coat of red oxide primer to match with existing shade etc complete, rest all as shown on drg and as directed by Engr-in-Charge.

(b) S&F in repairs top of Table office clerk steel top with 18mm thick prelaminated particle board exterior grade of approved make one side teak facing and balancing white on other side all the four edges provided with 4mm thick first class teak wood beading, rest all as shown on drg and as directed by Engr-in-Charge.

(c) S & F MS Lock (6 liver brass levers) Make:-Godrej with duplicate keys for drawers, as per approved sample & as directed by Engr-in-charge.

(d) M & L for repair including welding and replacement of heavy duty spring with new as per existing locking device to make functional for smoothly play of drawers in its original position, rest all as shown on drg and as directed by Engr-in-Charge.

(e) S&F in repair to leg Made out of square pipe 25mm square pipe having wall thickness 1.6mm including preparation of surface & applying two coats of synthetic enamel paint over two coats of red oxide primer to match with existing shade etc to match with existing shade etc complete, rest all as shown on drg and as directed by Engr-in-Charge.

(f) S&F to Hard Rubber/PVC toe of superior quality as approved & as directed by Engr-in-charge.

Table Dining ORs : Drg No. FD-165 (M)

(a) M&L in repair to leg made out of 25mm square pipe having wall thickness 1.6mm complete including preparation of surface & applying two coats of black/olive green synthetic enamel paint over a coat of red oxide primer to match with existing shade etc complete, rest all as shown on drg and as directed by Engr-in-Charge.

(b) M&L for welding of broken joints of Table Dining OR's including preparation of surface and applying two coat of black/olive green synthetic enamel paint over a coat of red oxide primer complete, rest all as shown on drg and as directed by Engr-in-Charge.

(c) S & F Top of the table dining OR,s made out of 19mm thick Marine plywood confirmed to IS-710 Make:-Greenply/Kitply of approved make complete with 22 gauge aluminium sheet of top, rest all as shown on drg and as directed by Engr-in-Charge.

(d) S&F Hard rubber toes of superior quality as specified and as directed by Engr-in-charge.

Chair revolving high back/low back/executive/computer with arm/without arm: Drg No. FD-75 & CWE/FD-01/2000

(a) S & F in repairs of maintenance free Gas lift for all type of chairs revolving rest all as shown on drg and as directed by Engr-in-Charge.

(b) S & F in repairs of Padestal assy. Injection moulded in black 30% glass filled nylon , 50mm MS castor pin is of press fitted to each prong for holding the castor,for all type of chairs revolving rest all as shown on drg and as directed by Engr-in-Charge.

(c) S & F in repairs of twin wheel castors for all type of chairs revolving rest all as shown on drg and as directed by Engr-in-Charge.

(d) S & F in repairs of PU seat & back duly upholstered with best quality Acrylic/polyester febric complete for all type of chairs revolving rest all as shown on drg and as directed by Engr-in-Charge.

(e) S & F in repairs of handles of chair revolving made of black integeral skin polyurethane reinforced with MS insert scratch proof complete for all type of chairs revolving with arm rest all as shown on drg and as directed by Engr-in-Charge.

Charpoy GI pipe with cotton newar: Drg No. FD-220 or Similar

(a) S & F in repairs 32mm dia ISI medium grade of approved make, long rail for GI Chapoy pipe including removing unserviceable long rail, rest all as shown on drg and as directed by Engr-in-Charge.

(b) Making short rail for GI Charpoy obtained from item No 8.01 here-in-before cut in to lenth and threading including removing of existing unserviceable short rails all as specified and directed.

(c) Making leg for GI charpoy from short rail obtained from item No. 8.01 here-in-before end threading other end provided with MNF clamp suitable for 19mm dia conduit pipe 3mm base plale welded at bottom and fixed in repairs as required as per drg.

(d) S&F in repairs MS Check nuts, rest all as shown on drg and as directed by Engr-in-Charge. MS Check nut as per drg.

(e) S&F in repairs GI Elbow 32 mm dia three way medium grade, rest all as shown on drg and as directed by Engr-in-Charge.

(f) Removing existing unserviceable / old tape newar nylon from charpoy GI/IP, all are of MES pattern and cleaning the frames and retaping with approved Ist qualitywhite newar tape nylon Make:-Primer/Binny of size 50 to 55mm wide including tightening of loose components all as per drawing and as directed by Engr-in-charge. (Weight of tape newar nylon shall not be less than 1.50kg per charpoy)

Chair Verandah: Drg No. FD-229 or similar

(a) Removal of unserviceable cane from Chair verandah, scraping existing paint from frame with sand paper and M&L for recaning for painting with two coats of synthetic enamel paint colour in white and M&L for recaning with white plastic cane 4mm wide, including replacing of hard rubber toes etc complete all as specified and as directed by Engr-in-Charge

(b) M & L for removing unserviceable leg from chair verandah and supply and fixing new leg 20 mm dia mild steel fixing with welding/revetting all as specified and as directed by Engr-in Charge.

Charpoy hard top MAP/08: Drg No. FD/E6/Map/04

(a) M&L removing of existing unserviceable / broken plywood from charpoy IP hard top and supply and fixing new 12mm thick commercial plywood of size 1950x900mm make kit ply /National/Greenply with ISI Mark

(b) M&L removing of existing unservceable / broken leg from charpoy hard top MAP fixing The new legs shall be of size 32mmx32mmx16 guage welded to long and short rails as shown on all as specified and as directed by Engr-in Charge.

Chair CB Steel with Arm/Without Arm: Drg No. FD-75(M)

M & L for taking down the following old unserviceable damaged parts of Chair CB Steel and supply & fixing new parts to make functional all as shown on drawing and as directed by Engineer-in-charge:- FD-75 (M)

(a) Replacement of seat frame (wooden) of Chair CB Steel with arms duly caned, including painting the the frame with black synthetic enamel paint of two coats over a coat of wood primer, complete all as per drawing and as direceted by Engineer -in-Charge.

(b) Replacement of back frame (wooden) of Chair CB Steel with arms duly caned, including painting the the frame with black synthetic enamel paint of two coats over a coat of wood primer, complete all as per drawing and as direceted by Engineer -in-Charge.

(c) Replacement of seat frame (wooden) of Chair CB Steel with out arms duly caned, including painting the the frame with black synthetic enamel paint of two coats over a coat of wood primer, complete all as per drawing and as direceted by Engineer -in-Charge.

(d) Replacement of back frame (wooden) of Chair CB Steel with out arms duly caned, including painting the the frame with black synthetic enamel paint of two coats over a coat of wood primer, complete all as per drawing and as direceted by Engineer -in-Charge.

(e) Replacement of handle (wooden) of Chair CB Steel with arms , including painting the the handle with black synthetic enamel paint of two coats over a coat of wood primer, complete all as per drawing and as direceted by Engineer -in-Charge.

(f) M & L for welding of broken joints continuously for smooth finish through gas welding including preparation of surface and applying two coat of Synthetic enamal paint over a coat of red oxide primer to match with the existing shade etc complete all as specified and as directed by Engr-in-charge.

Computer Table 2.5' x 1.5' (TP)

(a) Table top with 19mm thick BWR grade plywood for computer top

(b) Removing the unserviceable / broken top ( Channel 12" in drawer) and providing new channel including fixing it

CHAIR WRITING STEEL WITH ARMS (TP)

(a) M & L for taking down the following old unserviceable damaged parts of Chair writing Steel with arms and supply & fixing new parts to make functional and as directed by Engineer-in-charge:- TP

(b) S & F repair of seat frame with 12mm ply and cushion with leather cloth (Rexne cloth) size-480mmx480mmx750mm, including painting the the frame back side with two coats black synthetic enamel paint with spray gun over a coat of wood primer, complete and as direceted by Engineer -in-Charge.

(c) S & F repair of back seat frame with 12mm ply and cushion with leather cloth (Rexne cloth) size-430mmx210mmx50mm including painting the the frameback side with two coats black synthetic enamel paint with spray gun over a coat of wood primer, complete and as direceted by Engineer -in-Charge.

(d) S & F in repair of handle (wooden) size-430mmx65mmx25mm, including painting the the handle with two coats brown synthetic enamel paint with spray gun over a coat of wood primer, complete all as per drawing and as direceted by Engineer -in-Charge.

(e) S&F in repair of front Leg Made out of square pipe size-660mmx20mm square pipe having wall thickness 1.6mm including preparation of surface & applying two coats of synthetic enamel paint with spray gun over one coats of red oxide primer complete, and as directed by Engr-in-Charge.

(f) S& F in repair of Rear Leg Made out of square pipe size-890mmx20mm square pipe having wall thickness 1.6mm including preparation of surface & applying two coats of synthetic enamel paint with spray gun over one coats of red oxide primer complete, and as directed by Engr-in-Charge.

(g) S &F in repair of side rail Made out of square pipe size-440mmx20mm square pipe having wall thickness 1.6mm including preparation of surface & applying two coats of synthetic enamel paint with spray gun over one coats of red oxide primer complete, and as directed by Engr-in-Charge.

(h) S &F in repair of Stiffener Made out of square pipe size-460mmx20mm square pipe having wall thickness 1.6mm including preparation of surface & applying two coats of synthetic enamel paint with spray gun over one coats of red oxide primer complete, and as directed by Engr-in-Charge.

(j) M & L for welding of broken joints continuously for smooth finish through gas welding including preparation of surface and applying two coat of Synthetic enamal paint with spray gun over a one coat of red oxide primer to match with the existing shade etc complete all as specified and as directed by Engr-in-charge.

(k) S&F to Hard Rubber/PVC toe of superior quality in shape as Sqaure 20mm all as approved & as directed by Engr-in-charge.

Table cook house marble top : Drg No. FD-1019

(a) Replacement of broken Top shall be of 25mm thick marble stone slab duly finished and rounded edges and provide new top marble stone including preparation of surface and applying two coat of Synthetic enamal paint over a coat of red oxide primer to match with the existing shade etc complete all as specified and as directed by Engr-in-charge.

(b) M & L for welding of broken joints continuously for smooth finish through gas welding including preparation of surface and applying two coat of Synthetic enamal paint over a coat of red oxide primer to match with the existing shade etc complete all as specified and as directed by Engr-in-charge.

(c) Removing of broken/unserviceable leg 6mm dia MS iron and fixing new leg preparation of surface and applying two coat of Synthetic enamal paint over a coat of red oxide primer to match with the existing shade etc complete all as specified and as directed by Engr-in-charge.

TABLE 900X600x760MM STEEL WITH DRAWER: Drg NO. FD-1008

(a) S &F repairs top with 18 mm thick prelaminated particle board of exterior grade conforming to IS -12823 of appproved make one side teak facing and balancing white on other side al the four edges provided with 4mm thick first class teak wood beading,rest all as shown on drg including polishing and complete all as specifiedand as directed by Engr-in-charge. Make (Nova Pan / Eco- Board) .

(b) S&F in repairs drawers made of 20 gauge MS Sheet duly finished with standard workmanship including preparation of surface & applying two coats of synthetic enamel paint over one coat of red oxide primer to match with existing shade etc complete, rest all as shown on drg and as directed by Engr-in-Charge.

(c) S & F MS Lock (6 liver brass levers) Make:-Godrej with duplicate keys for drawers,and Fixinged with welding/ screws as applicable as per standard drawings as per approved sample & as directed by Engr-in-charge.

(d) S &F in repair to Leg Made out of square pipe 25mm square pipe having wall thickness 1.6mm including preparation of surface & applying two coats of synthetic enamel paint with spray gun over one coats of red oxide primer complete, rest all as shown on drg and as directed by Engr-in-Charge.

(e) S&F to Hard Rubber/PVC toe of superior quality in shape as Sqaure 25mm all as approved & as directed by Engr-in-charge.

TABLE 900X600x760MM STEEL W/O DRAWER: Drg No. FD-1007

(a) S &F repairs top with 18 mm thick prelaminated particle board of exterior grade conforming to IS -12823 of appproved make one side teak facing and balancing white on other side al the four edges provided with 4mm thick first class teak wood beading,rest all as shown on drg including polishing and complete all as specifiedand as directed by Engr-in-charge. Make (Nova Pan / Eco- Board) .

(b) S &F in repair to Leg Made out of square pipe 25mm square pipe having wall thickness 1.6mm including preparation of surface & applying two coats of synthetic enamel paint with spray gun over one coats of red oxide primer complete, rest all as shown on drg and as directed by Engr-in-Charge.

(C) S&F to Hard Rubber/PVC toe of superior quality in shape as Sqaure 25mm all as approved & as directed by Engr-in-charge.

Book case steel: Drg No. FD-1028

(a) M & L for removing unserviceable handle from Book case steel and supply and fixing new handle 100mm chromium plated and fixing with welding/revetting all as specified and as directed by Engr-in Charge.

(b) M & L for removing unserviceable locks from Book case steel and supply and fixing new locking device with duplicate key of approved quality of existing size fixed with screw/welding to shutter of almirah large steel and all as specified and directed by Engr-in Charge.

(c) M & L for removing the existing dentd shelves and shutters from Book case steel and bringing the item to the original shapes and refixing shelves nd shutters with necessary clits/nuts and bolts including one coat of synthetic enamelled paint of approved Tint over a coat of red oxide primer all as specified and directed by Engr-in Charge.

(d) M & L for removing the broken glass from shutter of Book case steel and supply and fixing new glass of 3 mm thick 200 mmx 100mm to shutter all as specified and directed by Engr-in Charge.

Removal of existing worn out painting with acid from in side & outside including preparation of surface frame complete of the following steel furniture and M&L for applying two coats of 1st quality synthetic enamel paint smoke grey/Olive green/White Make:-Asian/Berger/Shalimar over a coat of red oxide primer, rest all as shown on drg and as directed by Engr-in-Charge.

(a) Almirah Med/large steel 1/2 H 1/2 Self : FD-114(M), FD-1033 & MAP type

(b) Almirah steel large with shelves : FD-351

(c) Almirah steel medium with shelves: FD-350

(d) Chair CB steel with arms: FD-75 (M)

(e) Chair CB Steel without arms: FD-75 (M)

(f) Book Case Steel: FD-1028

(g) Locker bed side Steel : FD-257, FD-1029

(h) Rack steel adjustable three tiers (711 X 655 X 254 mm): FD-106 (M)

(j) Table Office Officer steel: FD-84 (M)

(k) Table Office clerk steel : FD-84 (M)

(l) Teapoy verandah(Painting in white colour): FD-255

(m) Table dining OR's: FD-165 (M)

(n) Side Rack With Three/Four Spaces: FD-1023, FD-97 (M)

(o) Table 900 X900X760mm steel: FD-1009

(p) Computer table (TP)

M/S SUN RISE BUILDERS

ROYAL FURNISHERS

VEE KAY IND