UPGRADATION OF SMQ BLDGS NO P-137 AND PROVN OF KOTA STONE IN AIRMEN MESS AT AF STN GORAKHPUR

Amount

Dismantling Brick tiles or terracing tiles, single layer on roofs including thatching any type, demolition of mud phuska etc including cleaning the surface by water/air pressure and removal of debrish beyond MOD land complete all as specified and directed.

Roughening cleaning to RCC roof surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc. and brushing neat cement slurry with 3.Kg of cement per sqm complete all as specified and directed.

M&L for providing cement concrete 1:2:4 type B-0 12.5mm graded stone aggregate for level course complete all as specified and directed.

M&L for rendering 15mm thick cement mortar 1:4 on fair face of brick work or concrete surface with liquid WPC @ 150 ml per 50 kg of cement, (WPC will be measured and paid seperately), complete all as specified and as directed.

Supply only Liquid water proofing compound. ISI Marked.

M&L for water proofing treatment to roof surface with APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyster non woven fabric (wt. not less than 150 gms/sqm at cener core) laid over primer @ 0.50 Kg/Sqm surface by torch sealed application complete all as specified and directed.

M&L for 300mm x 300mmx 7-9mm thick size roof cool tile to reduce room temperature, slip resistance , ocian blue in colour laid on cement mortar 1:6 and pointing in CM 1:3 over 15mm thick screed bed complete all as specified and directed.Make Hohnson or equivalent of Ocian blue.

Dismantling water tanks exc 500 but n.exc 1000 ltrs and removing to store complete all as specified & directed.

S&F Rotational moulded polyethylene water storage tanks 500 ltr (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

M & L for Glazed Coloured Ceramic tiles in vertical surface 350x250x7mm / 450x350x7mm thick jointless set and joint in neat cement slury and pointed in white or colour cement to match over and including 10mm thick plaster in CM 1:4 as backing coat to receive tiles complete all as specified and directed.

Demolition of cement concrete un- reinforced of any description and in any position not otherwise specifically provided for complete all as specified and directed.

M&L for 75mm thick cement concrete type C2 1:3:6 using 40 mm graded stone aggregate as in plinth protection including finishing cement concrete surfaces even and smooth without using extra cement.

M&L for 50mm thick cement concrete type B-1, 1:2:4 (20mm graded aggregate) as in sub floors/sub base complete all as specified and directed.

M & L for non skid coloured ceramic tiles 7 to 8mm thick jointless (Square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed in CM 1:6 complete all as specified and directed by Engr in Charge.

M & L for non skid coloured ceramic tiles 7 to 8mm thick jointless (Square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed in CM 1:6 complete all as specified and directed by Engr in Charge.

Taking down wooden chowkhat without taking of shutter from the frame exc 1.5 sqm but not exc 4 Sqm each complete all as specified and directed.

S&F pressed steel frames section 125 x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc, supplied and fixed complete all as specified and directed.

S&F pressed steel frames section 105 x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc, supplied and fixed complete all as specified and directed.

M&Lfactory made 35mm Plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treateds complete all as specified and as directed.

M&L for 30mm thick factory made flush door shutters solid core construction with block board core and ply wood face panels commercial type on both faces complete all as specified and as directed.

S&F factory made 35mm thick 2nd class HW glazed skeleton shutters open rebated and prepared to receive glass gazed etc but divided into squares with plain chamfered or rounded mitred and rebated sash bar any numbers edges of framing plain chamfered or rounded fitted with cut and mittered beads for sceuring glass guage etc. size of members as specified in SSR pt-I section 8 clause 8.24(a) fitted to chowkhats.

S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S Square tube, suppling & fixing in opening as per specification & drawing complete all as directed.

S&F factorymade solid pannel PVC door shutter 30mm thick consisting of frame made out of MS tubes for top and bottom rails MS frame shall be covered with neat moulded plan colour PVC 'C' channel having a PVC sheet strips of 20mm width stuck in side with solvent cement for styles and plain colour PVC sheets for top rails, lock rail and bottom rail on eithor side and as gap insert for top rail and bottom rail, panelling of plain colour PVC sheets to be fitted in the MS frame welded/sealed to the stiles, and rails with suitable PVC sheet bedding and jointed together with solvenet cement, supply and fixing in the frame at site as per specification as specified.

Taking down wooden chowkhat without taking of shutter from the frame n.exc 1.50 Sqm each complete all as specified and directed.

M&L anodised aluminium (sliding/ hanging type) windows/ventilator with frame size 60x40x2.00mm thick and shutter with section bearing bottom 25x18x1.50, top 39.4x17.7 X1.50 mm ( suitable for moving over three track fixed over top of frame work , top and side section of size 61.6 x 31.75x1.5mm and bearing bottom track of size 61.6x 31.75x1.5mm or fixing with hinges including necessary aluminium jointing cleats, glazing cleats, rubber packing anodised snape beading, screws etc with 4 mm thick tinted/ plain glass in panels incl all fitting and fixture complete all as specified and directed .

M&L anodised aluminium grill Wt nexc 3.50 kg per sqm with all fittings& fixture, shape and size as approved complete all as spesified and directed .

S&F butt hinges medium weight cold rolled mild steel 100mm complete all as specified and directed.

S&F 125mm aluminium anodised of extruded section barrel tower bolts complete all as specified and directed.

S&F 150mm long alumiunium handles cast type anodised. complete all as specified and directed.

S&F in Aluminium (extruded section) body Door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified and directed.

S&F aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolt of extruded section or cast aluminium alloy and fixed 300mm long complete all as specified and directed.

S&F in repair 18 mm thick HDHMR (High density high moisture resistance) board of grade1 quality make:Green Ply, Action Tesa or other make as approved by GE of one side prelem and other side to suitable for high gloss finsih mica of appoved quality make:- Century or as approved by GE Fixed with screws, slovent cement/adhesive to make cupboard shutters, sides, top, bottom, shelves inside the cabinet shutter or drawer including piano hinges and magnetic catcher,knobs complete all as specified and directed.

S&F in repair Harrison rails, mild steel, chromium plated with fixing brackets, stops, rollers but of anodised aluminium alloy etc complete al as specified and directed.

S&F in repair vitreous china ware wash hand basin 550mm x 400 mm size, white, flat back or angle including removing the existing one complete and refixing with new bracket and making good all connections complete all as specified and directed.

S&F in repair Vitreous China wash down water closet pan (pedestal pattern, with EWC including p or s trap ,seat cover , including connection to trap /drain and to flushing pipe anti syphonage pipe etc complete including making good floorcomplete all as specified as directed.

S&F in repair vitreous china squating pan orissa pattern size 580X 440mm white with intregal foot rest complete including lime concrete(excl flushing cistern and flush pipe) but connecting to flushing pipe, anti-symphonage pipe etc complete fixed in repair complete all as specified as directed.

S&F in repairs 15 mm bore PVC connection 600 mm long with brass nuts and washers on both ends all as in repairs specified and directed.

S&F in repair brass chromium plated shower rose 125mm size size fixed to pipe all as specified and directed.

S & F in repair for towel rail 600mm long complete all as specified and directed.

S&F in repair Soap dish, vitreous China white, aprroximate size 160x 160x90mm complete all as specified and as directed.

S&F in repairs Health faucet mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and CP wall hook including making connections and fixed in position complete in all respect as specified.

Supply and fix in repairs 15 mm bore bib tap brass chromium plated fancy type with crutch or butterfly handle screwed down, screwed for iron pipe fixed in repairs all as specified and directed.

S&F in repairs 15mm bore pillar taps CP long body brass chromium plated fancy type screwed down high pressure with chromium plated screwed shanks and fly nuts complete screwed for iron pipe in repairs all as specified and directed.

S&F in repairs brass chromium plated two way bib tap, of 15 mm bore complete all as specified and directed.

S&F in repair angle cock 15 mm fancy type, chromium plated, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed.

S&F in repair Gun-metal, globe 20 mm or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed.

S&F in repairs 10 Litre capacity PVC low level flushing cistern with ball valve and handle/push button 32mm dia PVC flush pipe including taking down unserviceable cistern complete all as specified and directed.

S&F in repairs sheet glass shelf assembly consisting of 5.50mm thick glass shelf 12 cm wide with chromum plated bracket guard and railing 60cm long complete all as specified and directed.

S&F in repairs stainless steel kitchen sink with draining board made of stainless steel 1mm thick,coupling plug , washers and waste pipes including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 915 mm X 460 mm and bowl size 410X330X160 mm complete all as specified and directed.

S&F Rectangle Stainless Steel Wall Mounted Kitchen Rack Measuring a generous 39 inches in Height and 36 inches in Width complete all as specified and directed.

Taking up or down 15 mm bore steel tubing and connections, including cleaning for Refixing or removal to store complete all as specified and directed.

Taking up or down 20 mm bore steel tubing and connections, including cleaning for Refixing or removal to store complete all as specified and directed.

S & F 15 mm bore Galvanized Steel tubes, medium grade for flush pipes, water supply pipes etc., fixed to walls and ceilings or laid in floors complete all as specified and directed.

Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc. and making good, cutting exceeding 20cm girth complete all as specified and directed.

S & F 20 mm bore Galvanized Steel tubes, medium grade for flush pipes, water supply pipes etc., fixed to walls and ceilings or laid in floors.complete all as specified and directed.

Taking down eaves gutters and rainwater PVC/CI pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fittings and accessories)

S&F for 110mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls or laid in trenches as in floors, all as specified & directed .

S&F for 110mm bore PVC (SWR) bends provided with access door all as specified & directed .

S&F for 75mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls or laid in trenches as in floors, all as specified & directed .

S&F for 75mm bore PVC (SWR) bends provided with access door all as specified & directed .

S&F Cast iron pipes 100mm with spigot and socket ends, vertically cast, class A, in any length complete all as specified directed.

M&L Granite (of any type) tiles 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing including 20 mm screed bed in CM 1:6 complete all as specified and directed.

M&L Machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing and including 20mm thick screed bed in CM 1:6 complete all as specified and directed by Engr in Charge

M & L for Machine cut kota stone slab 20-25mm thick in riser of steps in a single pieace, skirting, dado and pillar laid over cement screed in cm 1:3 and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing , complete all as directed and as specified by Engineer-in-charge.

S&F mild steel rolled section as in roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc having grading Fe 410 -W (GdeE- 250) quality A. complete all as specified and directed by Engr-in-Charge.

S & F Pre painted galvalume aluminium zinc coating GI Based semi corrugated steel sheet of 0.50mm thick of any colour having tensile strength of 550 MPA as in roof covering/cladding to wall fixed with self tapping screws as specified.

M&L preparation for new or previously untreated steel surfaces of any description, over 10 cm in girth, not otherwise described and painting two coats of synthetic enamel paint over a coat of red oxide complete all as specified.

S&F Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples.complete all as specified and directed.

M&L 100 mm thick cement concrete 1:4:8 type D2 using 40mm graded stone aggregate as in sub base complete all as specified.

M&L for sand cushioning layer under the floors and hand level surface including watering and consolidation to receive floor tiles.complete all as specified and directed.

M&L for Machine pressed precast concrete interlocking paver block vibro compacted rubber moulded with grey cement and pigment any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade complete all as specified and directed by Engr-in-Charge.

Taking down old cement plaster including ranking out joints, hacking for key, scrubbing down with water etc and rubbish off the premisses complete all as specified and directed.

M&L Rendering 15mm thick in CM 1:6 on fair faces of brick work or concrete surfaces, finished even and smooth without using extra cement complete all as specified as directed.

M&L Rendering 15mm thick in CM 1:4 on fair faces of brick work or concrete surfaces with liquid WPC @ 150 ml per 50 kg of cement or as per manufacturer instructions ( WPC will be measured and paid separately), finished even and smooth without using extra cement complete all as specified as directed.

M&L Rendering 5mm thick in CM 1:3 on celing, finished even and smooth without using extra cement complete all as specified as directed.

M & L preparation new plastered surfaces of any description , including cornices and applying three coats of white wash on ceiling complete all as specified and as directed.

M&L for preparation of new plaster surfaces of wall and applying two coats of distemper oil emultion over a coat of primer complete all as specified as directed.

M&L for preparation of new plaster surfaces of wall and applying two coats of cement base paint over a coat of alkali resistant primer complete all as specified as directed.

M&L for preparation of old distempered and painted surfaces of wall and applying two coats of Oil Bound Distemper over 1mm thick wall care putty on walls complete all as specified and as directed.

M & L for preparation of old surfaces of any description , including cornices and applying two coats of white wash on walls complete all as specified and as directed.

M & L for preparation of old surfaces of any description , including cornices and applying two coats of white wash on ceiling complete all as specified and as directed.

M&L for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10+E35 sqm over 1mm water proofing putty in old surfaces. complete all as specified and directed.

M&L preparation of old painted steel surfaces of any description, over 10cm width or girth and apply one coat of synthetic enamel paint complete all as specified and as directed .

M&L for Joist, channel, angle, or tee sections, Fe 410 -W (Gde E- 250) quality A fixed independently, with or without connecting plates, etc complete all as specified and directed.

M&L for hot rolled steel flat Framed work of water tanks mesh welded and similar work conforming Fe 410 -W (Gde E- 250) quality A omplete all as specified and directed.

S&F 4mm dia galvanised steel wire, 50x50mm mesh, made up into mattresses or cages, lapped, wired and laid in position, including closing after filling complete all as spcified and directed.

M&L for cutting into existing manholes for connecting new drains, making good to pipe and rendereing, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-1 smooth finished, and reforming benching as required internal dia of pipe 150mm complete all as specified.

Demolition of brick work or stone/ boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars etc but excluding ashlar facing dressed stone work and precast concrete articles complete all as specified and directed.

M&L for brick work with subclass 'B' brick straight or curved on plan 6m mean radious built in CM (1:4) etccomplete all as specified and directed.

S&F in repairs 15mm Stop valves, fancy type, chromium plated with long shank and cup (concealed type)cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and as directed.

S&F in repair Gun-metal, globe 15 mm or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed.

Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm soft and loose soil all as specified.

M & L for removing excavated soils n exc. 50m and depositing where directed at a level n exc. 1.5m above the starting point complete all as specified and as directed by the Engineer-in-Charge.

M & L for PCC 1:3:6 Type C2 using 40 mm graded aggregate as in walls or retaining walls, any thickness, size or shape including pilasters, buttresses columns, pillars, boundary pillars and posts (including caps and bases).complete all as specified and directed.

M&L 100 mm thick Cement concrete type B-0, 1:2:4(using 12.5 mm graded aggregate) as in flooring finished rough to receive tiles complete all as specified and directed.

Taking down carefully copper/aluminium point wiring (light, fan, socket, bell or power) complete including all electrical fittings & fixtures(DBs, submain,cables etc) and making good disturbed surfaces of wall , floor etc and matching wth original colour of wall, complete, all as specified & directed.

Taking down carefully copper/aluminium sub main wiring from existing concealed PVC conduit complete and making good disturbed surfaces of wall , floor etc and matching wth original colour of wall all as specified.

Disconnecting/dismantling of old existing unserviceable DB's any way 240 Volts with their unserviceable.burnt MCB's/Isolators all as directed.

M&L in repairs for concealed sub main wiring using two single core PVC insulated, unseathed stranded copper conductor cable of size 6.0 Sqmm of voltage rarting upto and including 1100 volts drawn in and including PVC concealed conduit of dia not less than 25mm with all fittings and accessories, along with one run of PVC (green colour) insulated, unsheathed, stranded copper conductor of size 6.0 Sqmm (green colour) as earth continuity conductor all as specified and directed. (Note : Two runs of single core PVC cable with one run of earth conductor and conduit shall be measured as one unit). Note : Two runs of copper conducter and one runs of earth copper conducter shall be measured as one length.

M&L in repairs for concealed sub main wiring using two single core PVC insulated, unseathed stranded copper conductor cable of size 4.0 Sqmm of voltage rarting upto and including 1100 volts drawn in and including PVC concealed conduit of dia not less than 25mm with all fittings and accessories, along with one run of PVC (green colour) insulated, unsheathed, stranded copper conductor of size 4 Sqmm (green colour) as earth continuity conductor all as specified and directed. (Note : Two runs of single core PVC cable with one run of earth conductor and conduit shall be measured as one unit). Note : Two runs of copper conducter and one runs of earth copper conducter shall be measured as one length.

M&L light fan point controlled by one switch with PVC insulated, unsheathed , multi stranded, single core copper conductor FRLS ( Flame Retardant Low Smoke) cable 1.50 Sqmm suitable for fixing in concealed PVC conduit of size not less than 20 mm dia with metal flush boxes including white cover plate with frame of required module.Metal flush box should not less than 2 mm thick duly painted inside and outside with two coats of synthetic enamel paint over one coat of red oxide primer of required module suitable for housing modular switches, socket, fan regulator etc. PVC insulated, unsheathed, multi stranded, single core copper conductor FRLS cable 1.50 Sqmm used as earth wire to commen earth and connected to common dolly drawn in same conduit all as specified.

All as per item No 103 above but one 3/5 pin socket out let 5 amp on same board with other switches complete all as specified and directed at site.

All as per item No 103 above but socket 5 amp on independent board complete all as specified and directed at site.

All as per item No 103 above but One bell/ buzzer point controlled by one push button on the same board with other switches or independent with cables 1.5 sq.mm size complete all as specified and directed at site.

All as per item No 103 above but socket out let 3/6 pin05 Amp one light point controoled by two way switch complete all as specified and directed at site.

All as per item No 103 above but One fan point controlled by one push button on the same board with other switches or independent with cables 1.5 sq.mm size complete all as specified and directed at site.

All as per item No 103 above but 2.5 sq mm wire for one 15 Amps socket outlet independent with continuous PVC insulated single core green colour copper earth wire of size 1.5 sq mm connected to common earth dolly.

Supply and fixing in repairs ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1400 mm sweep. Min air delivery 245 CFM with brushless direct current motor (BLDC) ceiling 230 V, 1400 mm sweep including necessary connection with ceiling rose with 3 core 1.0 Sqmm PVC insulated round flexible cable and including writing MES No all as specified and directed at site. (Old retrieved fan shall be deposited in MES store yard)

S&F in repairs single pole and neutral sheet metal enclouser with a two pin and earth plug and socket (metal clad) 20 Amps comlete with one single pole MCB 20 Amps capacity.

S&F in repairs exhaust fan single phase 230/240 volt AC 300mm sweep with louvers, plastic body with twisted copper flexible wire 23/0.0076mm including taking down old fan and deposited in MES store complete all as specified and directed. Make: Havells/Bajaj/CG.

S&F modular switch 1 way 6A, 1 module, flush button single pole, one way, complete all as specified and directed at site

S&F switch piano, flush type 5/6 amp, single pole, two way 240 volt complete all as specified and directed.

Supply & Fixing switch modular bell push 6 Amp ,01 module.AC 230 volt

Supply and fixing in repairs call bell , ding dong / musical, single phase, 230 volts, all as specified. Make: Anchor Penta /SSK/Legrand.

Supply & Fixing modular socket 6 Amp-2/3 pin combined ,2 module complete all as specified and directed at site.

S&F modular socket outlet 2 in 1, 6 pins 6A and 16A, combined module , complete all as specified and directed at site

S&F modular switch 1 way 16A, 1 module, flush button single pole, one way, complete all as specified and directed at site

S&F ceiling rose surface polycarbonate 65X50mm three terminals complete all as specified and directed.

Supply & Fix 20 watt LED light fitting engineering plastic batten with white acrylic cover LED light (integrated LED channel) natural white, energy saving complete with its all accessories internally prewired and including connecting up with twin core twisted flexible copper conductor cable of suitable size complete all as specified and directed. Make:- Havells Cat part No. ENDURA LINE ARNE OBS20WLED865SPCWH or equivalent in Bajaj / CG.

S&F LED light fitting mirror type with high output diffuser 2 feet, 10w, 220 V AC decorative type with driver holder and LED lamp 10 W including connecting of with three core flexible copper conductor cable of suitable size, complete all as specified & directed.

S&F, testing energy saving, die cast aluminium housing IP 65 protection, 35 W LED flood light fitting with high power LED as light source complete fixed on pole using 30x5mm FI clamps, nuts, bolts & washers all as per site requirement complete all as specified and directed. Make:-Havells Cat No. ENDURA CITYLITEPLAT PLUSSL35WLED 757SASYBOPC or equivalent iin Bajaj/Philips/CG/ WIPRO

Supply & Fixing sheet metal enclouser MCB DB double door bus bar neutral link,earth bar and din rail TPN 4 way complete all as specified and directed at site.

Supply & Fixing sheet metal enclouser MCB DB double door bus bar neutral link,earth bar and din rail SPN 8 way complete all as specified and directed at site.

S&F in repairs MCB SPN 100 Amps rating 240V, 10 KA 'B' curve, TPN/FP complete with connection testing and commissioning, completeall as specified and directed at site.

S&F in repairs MCB double pole 40 Amps rating 240V, 10 KA 'B' curve, TPN/FP complete with connection testing and commissioning, completeall as specified and directed at site.

S&F in replacement MCB single pole 5 to 32 Amps rating 240V, 10 KA 'C' curve, complete with connection testing and commissioning, completeall as specified and directed at site.

M&L earthing complete with galvanised steel earth plate 600X600X6 mm thick buried directly in ground (earth pit not les than 2.25 M deep below GL with top edge of plate not less than 1.5 m below GL) connected with GI earth strip of 32X6 mm as earthing leads by means of bolts, nuts, check nuts and washers beside brazing at all joints as shown on drawings and including excavation, earth work. GI pipe light grade 40 mm bore for protection of GI earth strip from earth electrode to and including the earth test point, supplying and laying charcoal dust, common salt PCC (1:2:4) type B1chamber and MS angle iron frame of 40mmx40mm x3 mmand RCC cover 40 mm thick (1:2:4) type B1 using 20 mm graded stone aggregate reinforced with 8 mm dia TMT bars @ 75 mm C/C both ways with MS handle 12 mm dia, PGI funnel and wire mesh, 20 mm dia GI pipe light grade for watering all as shown in electrical plate No 3 of SSR Part -I and conected to earth test point including testing complete all as secified and directed.

S&F in repairs electric water heater , storage type steel body with copper inner tank and heating element upto 2 KW, capacity 50 liter, BEE 5 Star rated, complete all as specified and as directed. (Note: Old heater will be deposited to EM store yaed)

S&F steel water tubing 15 mm bore medium grade galvanized with all fittings such as bends, tees, nipples, elbows, reducers, etc, fixed complete to walls and ceilings or laid in floors all as specified and directed.

S&F PVC connections transparent reinforced of 15 mm size with PTMT nuts of length 450mm, complete all as specified and directed at site.

S&F for 15 mm bore pillar taps CP fancy type screwed down high pressure with long shanks and fly nuts screwed for iron pipe Hot or Cold with long screwed and fixed complete all specified and directed.

Taking down electric meter and refixing in same position after repair work completed complete all as directed at site

Supply and laying ,jointing and testing XLPE insulated extruded PVC outer sheath and inner sheath galvanized steel armoured cable with aluminium conductor suitable for rated voltage of 1100 Volts grade conforming to IS 7089 (Pt I of 1988) laid in tranches/ pipe/duct/pole complete all as specified and directed size 25 sq mm 4.0 core.

Excavation in trenches n.exc 1.5M wide & n.exc 1.5m in depth for laying & removing in existing of cable any sizes and getting out in soft lose soil all as specified

Returning filling in excavated earth work including spreading, levelling, watering and well ramming in layers n.exc 25cm thick in any strata

Removing excavated soil to a distance n.exc 50m, depositing where directed at a level n.exc 1.5M above the starting point

Supply/ filling dry river sand in trenches for cable protection All as SSR Part I. NOTE : Punned thickness only will be measured & Paid

Supply and laying Bricks; common burnt clay building bricks, sub-class ‘B’ designation 75 complete all as specified and directed

S&F steel water tubing 50 mm bore light grade galvanized with all fittings such as bends, tees, nipples, elbows, reducers, etc, fixed complete to walls and ceilings or laid in floors all as specified and directed.

M/S NITISH ASSOCIATES (BID ID -3345657)

ANIRUDH ENTERPRISES (BID ID -3340957)

A K CONSTRUCTIONS (BID ID -3345812)

M/s Ishwarchand Traders (BID ID -3343830)

DEEP ENTERPRISES (BID ID -3345792)

PAWAN GARG (BID ID -3345123)

SANDHYA ENTERPRISES (BID ID -3341498)

H AND Y GROUP (BID ID -3345591)