Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹52.6 LAccepted-AOC A SECTOR BHAGWATI BHAVAN VIJAY NAGAR LAL GHATI BHOPAL M P 462030 | BHOPAL | BHOPAL | MADHYA PRADESH | 462030 | L1 | Accepted-AOC AMOUNT QUOTED IS LOWEST | |
| 2 | L2₹58.2 L+₹3.7 L (6.79%)Rejected-Finance RZ 31 222 J BLOCK WEST SAGARPUR NEW DELHI 110046 | NEW DELHI | NEW DELHI | DELHI | 110046 | L2 | Rejected-Finance Quoted amount not lowest | |
| 3 | L3₹59.9 L+₹5.4 L (9.88%)Rejected-Finance | L3 | Rejected-Finance Quoted amount not lowest | |
| 4 | L4₹63.3 L+₹8.8 L (16.2%)Rejected-Finance WZ 250 B 2 GALI NO 08 SADH NAGAR I PALAM COLONY NEW DELHI 110045 | NEW DELHI | SOUTH WEST DELHI | DELHI | 110045 | L4 | Rejected-Finance Quoted amount not lowest | |
| 5 | L5₹64.4 L+₹9.9 L (18.2%)Rejected-Finance WZ 199 LAJWANTI GARDEN GALI NO 4 NEW DELHI 110046 | NEW DELHI | DELHI | 110046 | L5 | Rejected-Finance Quoted amount not lowest |
Tender Value
₹1 Cr
EMD Value
₹1.8 L
Closing Date
9 Mar 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
CWE DELHI CANTT
HQ CWE DELHI CANTT
REPAIR OF BOUNDARYWALL FOR G 20 INTERNATIONAL SUMIT PREPARATION IN THE AOR UNDER GE CENTRAL DELHI CANTT 10
2023_MES_579380_1
CWE/D-26/2022-23
Open Tender
Civil Works
Item Rate
180 days
CWE Delhi Cantt
As per tender documents
7 documents required · 7 mandatory
₹1,000
GE CENTRAL DELHI CANTT
₹1.8 L
Yes
CWE DELHI CANTT
28 Mar 2023
7 Feb 2023
10 Mar 2023
7 Feb 2023
9 Mar 2023
3 Mar 2023
7 Feb 2023 - 17 Feb 2023
17 Feb 2023
Amount
M&L for preparation of old/new surface including scrapping and two coats of weather proofing exterior acrylic emulsion paint Ultima (Luxury) of Asian or equivalent as per approved make list in Particular Specification, incl one coat of primer over boundry wall complete all as specified and all as directed. Note:- 1. Material shall be procured from manufacturer and work shall be got executed through authorised applicator.
M&L for applying of wall care putty on newly/old plastered walls of 2-3mm thick including preparing the surface with even and smooth complete all as specified and directed. (Note : Wall putty to be procured from manufactures directly)
Taking down cement plaster in any thickness from brick or stone etc including raking out joints, hacking for key scrubbing down with water etc complete all as specified.
M&L for 15mm thick ready mix cement plaster with bulk density 1.4 to 1.70KG per ltr water ration 17 to 19% by weight with compressive str as per IS 4031 part-VI applied as per the manufactore instr incl necesaery cement screed and prepartion of surface to received ready mix plaster up to G+5 bldg including scaffolding . complete all as specified and directed by engineer-in-charge complete all as specified and directed compound complete.
Demolition of brick work built in cement mortar including all quoins, arches, pillars etc in any description and position, complete all as specified.
Brick work with old size bricks straight or curved on plan exceeding 6 metre mean radius built in cement mortar 1:6 (1 cement : 6 coarse sand), complete all as specified.
All as per serial item No 06 but except bricks, all as specified. (Servicable bricks retrieved from Serial Item No 05 shall be used).
M & L Providing, cement concrete in roof kerbs or mud stops, coping to top of wall, rounded or chamfered on edges type B 0 1:2:4 (12.5mm graded stone aggegate) complete all as specified and as directed
M&L formwork to sides of pillars, beam, posts, struts, piers, columns and stanchions finished rough and fair complete all as specified and directed
M & L for mild steel TMT bar 10mm dia and over cut to length,bent to shape required including cranking bending spirally for hooping for columns hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed.
Ditto- item No 10 but 5mm dia and over upto and including 10mm dia in stirrups spacers and binders complete all as specified and as directed
M&L for cement concrete M-25 design mix (using 20mm graded stone aggregates) in column, Pillar, post, RCC wall etc complete all as specified & directed..
S&F MS sections( angle iron/Channels) of any size and cutting tops to shape as directed, drilling holes, notching for wire etc, flat iron fillets (for securing wire meshetc) including all necessary drilling bolting orriverting etc and similar work conforming to Fe 290 Gde E-165 and two coats of syntheticenamel paint over a coat of rexide primer etc complete all as specified and as directed.
S&F Galvanised 2 strand steel barbed wire 2.24 mm dia barbed with 2mm dia barbs at 75mm spacings and straning and fixing to any type of standard rails straining bolts, including securing of tying at crossings with and provision of galvanised mild steel wire staples or steel pins etc incl taking down as directed (each) line wire to be measured.
S&F punched tape concerntana coil (PTCC) razor blade having minimum weight of 8.75 Kgs (+) or (-) 5% per coil stretched to a length of 5 to 6 mtrs (50 turns) to achieved 610 mm dia with fencing to steel posts and to another coils MS nibs including fixing with special all as specified and directed by Engineer-in-Charge.
Dismantling/Demolition of old existing view cutter arrangement fixed by wooden bali/bamboo and green cloth complete all as specified and as directed.
Excavating in post holes (or similar holes) each not exceeding 0.50 cum getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm in soft/loose soil complete all as specified.
M&L for PCC 1:2:4 nominal mix type grade B-1 using 20 mm graded stone aggregate in foundation and mass concrete including complete all as specified and as directed.
S&F designer/coloured pre painted Galvalume Aluminium Zinc coating GI base corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa and confirming to AZ 150 specification as in roof covering/cladding to all/Ridge fixed with sel tapping screws as specified.
M&L for cement concrete M-25 design mix (using 20mm graded stone agg) in foundation, incl raft footings, foundation beam, plinth beam and bases for column .
M&L for cement concrete M-25 design mix (using 20mm graded stone agg) in beams, cantilevers bresscuments etc
M&L PCC 1:4:8 type D-2 using 40mm graded stone aggregates as in foundation complete all as specified
M/S Chhavi Constructions Co
M/s SAAR ENGINEERS
imran construction company
M/S MSD & Associate
The new hut furnitures
M/s Verma and Co
stage.html
html • 0.07 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .