Estimate for Providing New Gate and Gearing system and Remodeling of canal Regulating structures at RD 114500 of Jalandhar Distributory

Amount

Dismantling brick work tile, masonry or tile lining in cement

Earth work in excavation in foundations trenches etc. in all kinds of soil where Pick-Jumper work is not involved and not exceeding 2.0 metres depth including dressing of bottom and sides of trenches, stacking the excavated soil clear from the edge of excavation and subsequent filling around masonry in 15 cm, layers with compaction including disposal of all surplus soil as directed within lead of 30 metres.

Plain cement concrete 1:3:6 nominal mix in foundation with crushed stone aggregate 40 mm nominal size mechanically mixed, placed in foundation and compacted by vibration including curing for 14 days.

Plain/Reinforced cement concrete in sub-structure complete as per drawing and Technical Specifications RCC Grade M25 Height upto 5m RCC M 25 With Batching Plant, Transit Mixer and Concrete Pump including centering an shuttering

Providing and laying of Filter media with granular materials/stone crushed aggregates satisfying the requirements laid down in clause 2504.2.2. of MoRTH specifications to a thickness of not less than 600 mm with smaller size towards the soil and bigger size towards the wall and provided over the entire surface behind abutment, wing wall and return wall to the full height compacted to a firm condition complete as per drawing and Technical Specification

Nicking cement concrete surface (over 28days old including preparation and layingslurry

First class burnt brick work laid in cement sand mortar 1:3 in first storey upto 4 metres above plinth level

Finishing walls with exterior decorative cement based paint such as snowcem, robbiacem etc. two or more coats to give an even shade

Painting leveling staff with synthetic enamel paint (b) two coat work

Painting new letters and figures of black synthetic enamel paint to an even shade

Putting 1:3 (Cement:water) cement slurry with cement @ 2.25 kg per sqm on prepared bed and side slopes before laying concrete on bed and side slopes.

Cement concrete lining 75mm thick or less (for 60 mm)laid manually for irrigation channels, using cement concrete M- 15 with cement content 325 kg/Cum mixed in an automatic computerized Batching & Mixing Plant and transported to the site in transit mixers with average lead of 1 km (FOR TRAPEZOIDAL SECTION AND CUP SECTION OF ALL RADII)

Dressing of Side Slopes and prepration of sub grade for lining complete in all respect as per pwd specification.

Providing, Laying , fixing & jointing of P.V.C. Pipes as per ISI-4985 (ISI marked with the prior approval of Engineer-in-Charge) along the Trenches and laying the same in Trenches to correct alignment and gradients, cutting, jointing and testing complete as per specifications.xvi 160mm o/d pipe of 6 Kgf. / sqcm

Providing, Laying , fixing & jointing of P.V.C. Pipes as per ISI-4985 (ISI marked with the prior approval of Engineer-in-Charge) along the Trenches and laying the same in Trenches to correct alignment and gradients, cutting, jointing and testing complete as per specifications.xv 110mm o/d pipe of 6 Kgf. / sqcm

Cold twisted deformed bars fe 500 grade for RCC work where not included in the complete rate of RCC i/c bending binding and placing in position

Providing skin plate of Gates (8mm) of desired shape and size complete in all respect and to entire satisfaction of engineer in-charge.

Providing skin plate of Gates (10mm) of desired shape and size complete in all respect and to entire satisfaction of engineer in-charge.

Steel work fixed independently without connecting plates including cutting hoisting and fixing in position Structural Steel, Flats, tees Angles

Steel casting as per I.S. specification & grade complete in all repects and to entire satisfaction of engineer-in-charge.

Providing Chequred Plate 6,8mm thickness of desired shape and size complete in all respect and to entire satisfaction of engineer in-charge.

Brass Casing as per IS specification & grade complete in all respect and to entire satisfaction of engineer in-charge.

Providing & Fixing GI Pipe of various sizes complete in all respect and to entire satisfaction of engineer in-charge.

Providing & Fixing MS J -Bolt with nut and washer dia 20mm complete in all respect and to entire satisfaction of engineer in-charge.

Drilling/Boring hole including rimming complete in all respects and to entire satisfaction of Engineer-in-charge

Providingof hollow bulb seal( Side Seal ) and fixing of position including prepration of the surface complete in all respect and entire satisfaction of engineer in charge

Providing and Fixing in Position of flat/wedge seal including preparion of surface complete in all respects and to entire satisfaction of Engineer-in-charge size 75*12mm.

Providing and Fixing MS Nut and Bolts of all Sizes and length required and to entire satisfaction of Engineer-in-charge.

Supply of Multipurpose synthetic Grease Complete in all respects and to entire satisfaction of engineer-in-charge.

Supply of Multigrade Mobile oil 10w-40 or 10w-50 Complete in all respects and to entire satisfaction of engineer-in-charge.

Providing High Speed Diesel

Applying priming coat with metal primer on new steel or iron work i/c preperation of surface.

Finishing with epoxy paint two or more coat at all locations prepared and applied as per manufacturer specifications complete.

Fillet Welding with high strength steel rods complete in all respects and to entire satisfaction of enginer incharge (i) 6 mm wide.

Providing and Fixing M.S. spindle with Double start or triple start threading 11 ft height 1/3/4" dia complete (i) upto 1.5 ton Capacity.

Providing and Fixing M.S. spindle with Double start or triple start threading 11 ft height 1/3/4" dia complete (ii) 1.5 to 2 ton Capacity.

CI Housing Cover with worm & worm wheel assembly shaft ,Handle GM Bust with triple start threading inside for spindle complete including labour charges

Commissing and testing of gates at site complete in all respects and to entire satisfaction of enginer incharge

Any Other Item

GURJIT SINGH CONTRACTOR