Canal Distribution System of OR-65 Ex.- 127.88 Km of CLMC Ex. Chandil Dam through piped irrigation network under gravity.

Amount

DI Pipe : Providing and Supplying ISI mark Centrifuggaly cast (Spun) Ductile Iron Pipes (Class K-9) of 100 mm and above all diameter for water works with socket & spigot ends confirming to IS 8329/2000 in the standard working lengths of 4.5, 5.5 & 6m suitable for classification K-7 & K-9 suitable for push-on-joint (rubber gusket D jointing) with cement mortar lining inside the pipes with outside zinc and bittuminous coating. Rates are FOR rate including Inspection & carriage upto site including Contractor profit & overhead charges etc. eccluding GST. DWSD, Jharkhand SOR - M 1026 & Add 10% CP 300 mm dia pipe

350 mm dia pipe

400 mm dia pipe

450 mm dia pipe

500 mm dia pipe

600 mm dia pipe

700 mm dia pipe

750 mm dia pipe

800 mm dia pipe

900 mm dia pipe

Manufaturing,Supply, Delivery , laying and jointing of Double chambered restrained joint DI K9 Pipes confirming to IS 8329 (restrained joints are designed and tested as per ISO 10804) (to be used to for minimum required length as per design along with double chambered restrained DI fittings to avoid concrete thrust block at bends) including rubber gaskets confirming to IS 5382 -1985/8329-2000 with latest amendments and locking bars & rubber spacers , conveying to work site, rolling and lowering into trenches, laying true to line, level and perfect linking at joints, testing and commissioning, including loading and unloading at both destinations, cutting of pipes wherever necessary, jointing with DI specials (excluding cost of specials) and rubber gaskets, cleaning the socket and spigot end with soap solution, applying soft soap to the socket and spigot ends before insertion of rubber gaskets, jacking and fixing in perfect conditions etc. The cost includes soap solution, soft soap, waste etc. and giving necessary hydraulic test to the required pressure as per ISS with all lead and lifts and cost of all jointing materials etc complete but excluding taxes. Telangana Common SoR 2022-23 - 37, Public Health Items (Part –IV) 300 mm dia pipe

350 mm dia pipe

400 mm dia pipe

450 mm dia pipe

500 mm dia pipe

600 mm dia pipe

700 mm dia pipe

750 mm dia pipe

800 mm dia pipe

900 mm dia pipe

Providing and supplying in standard lengths High Density Polyethylene Pipe (HDPE Pipe) confirming to IS 4984-4984/14151/12786/13488 (Latest Revision with necessary Jointing materials like mechanical connector i.e. thread/insert joint/quick release coupier joint/compression fitting joint or flanged joints excluding coupler/specials and taxes). HDPE Pipe of Material Grade - PE 80-PN 06 DWSD, Jharkhand SOR - Sl No. - M 1028 & Add 10% CP) 100 mm dia pipe

125mm dia pipe

140 mm dia pipe

160 mm dia pipe

180 mm dia pipe

200 mm dia pipe

225 mm dia pipe

250 mm dia pipe

280 mm dia pipe

315 mm dia pipe

A) Earth work in excavation (As per IS. 3114/1965) for laying of different types and sizes of pipes so as to give one meter average cover over the socket of pipe with disposal of excavated earth within initial lead and lift as per specification and direction of Engineer in charge (Classification soil item B) - 60% of excavated earth.

B) Earth work in excavation in ordinary rock or soft rock (where blasting is not needed) (Vide classification of soil item-C) with initial lead of 10M and lift of 1.5M including dressing making the sides in proper profile and dressing the bed in proper grad etc. all complete as per specification and direction of E/I. )-40% of excavated earth

Earth work in back filling the trenches after laying different types and size of pipes with earth removed during excavation within initial lead and lift as per specification and direction of Engineer- in- charge. (For classification for Soil item- A & B). (JH-DWSD-SOR-3.1.1.2)

Providing coarse clean sand in filling in foundation trenchesor in plinth includingrall materials, labour, royalty and taxes all complete as per building specificationand direction E/I. (Mode of measurement compacted volume) [JH-BCD-SOR-5.1.10]

Supplying labours, tools, tackles, lubricant etc. for laying and jointing C.I.S/S tyton pipes (class LA) in trenches without supplying rubber gasket and making gasket joints including providing night guard, barrier and red light to safe guard against accident all complete (Pipe to be suppllied departmentally free of cost and laying of pipes is to be done as per I.S.S.3114-1985) as per design, specification and direction of E/I. [DWSD SOR 3.1.32.b] 300 mm dia pipe

350 mm dia pipe

400 mm dia pipe

450 mm dia pipe

500 mm dia pipe

600 mm dia pipe

700 mm dia pipe

750 mm dia pipe

800 mm dia pipe

A) Supplying labours and tools for laying and jointing H.D.P.E. pipes in trenches and making butt welded joint, supplying heating mirror, jack etc. and providing night guard, barrier and red light to safe guard against ancident, all complete as per specification and direction of E/I. (DWSD 3.1.37) 110mm dia pipe

125mm dia pipe

140 mm dia pipe

160 mm dia pipe

180 mm dia pipe

200 mm dia pipe

B) Lowering, Laying and Jointing H. D. P. E./M. D. P. E. pipes in proper position including all specials by compression fitting/electrofusion and butt fusion jointing procedure as per relevent IS Code complete with all materials for jointing procedure like Electrofusion machine, Electric heater/ butt fusion welding machine with hydraulic jack, top loading clamp etc. and all labours as directed by engineer in charge as per IS-7634 Part II. [MJP P-106] Section - I/H.D.P.E PIPES, Page-115 225 mm dia pipe

250 mm dia pipe

280 mm dia pipe

Providing and supplying ISI standard D.I specials & fitting with sealing rubber gasket of S.B.R complete with cast iron follower gland and M.S nut & bolts coated or otherwise protected from rusting and suitable for D.I pipes including ED, CST, all taxes, etc. complete as per I.S-9523 but excluding freight. [JH-DWSD-SOR- Part B - M 1027 + Inspection - 1%, Transportation 10 % & C.P. @ 10% added. Fittings 600-900 mm dia

Manufacture, Supplying and fitting Ductile Iron Double Chambered Restrained Joint Specials confirming to IS 9523 :2000 (restrained joints are designed and tested as per ISO 10804) of Class K-12 (Alternative and to avoid concrete thrust blocks along with minimum length of Restrained joint DI pipes at bends) including rubber gasket confirming to IS 5382 : 1985 and locking bars & rubber gaskets etc complete but excluding taxes. Telangana Common SoR 2022-23 - 38, Public Health Items (Part –IV) Fittings 600-900mm dia

Providing double flange sluice valve (Size 50mm to 1200mm) confirming for IS-2906/14846 including worn gear arrangements as per test pressure stainless steel spindle, caps transportation etc. all complete. DWSD SOR Item - M1039 B (Without bypass arrangements) 100mm

Providing double flange sluice valve confirming for IS - 2906/14846 including worn gear as per test pressure stainless steel spindle caps transportation etc all complete FOR Rate including all taxes. (Without byepass arrangement - PN-1.6) (Scour Valve) JH-DWSD-SOR-M-1039-C 100 mm

Supplying labour and tools for fixing C.I. sluice valve in trenches with a pair of C.I. Tail piece, including making lead caulked joints and flanged joint as per I.S.S. specification, including supplying all jointing materials (Pig lead confirming to I.S.S. 782-1978, yarn confirming to I.S.S. 6587-1972 and nuts and boilts confirming to I.S.S. 1364-1983) including drilling holes in flanges if required as per specification and direction of E/I (Sluice valve and pieces to be supplied departmentally free of cost). JH-DWSD-SOR-3.1.35 100 mm

MJP Section I(XII) - 4 750 mm

Providing and supplying Kinetic Double Orifice type Air Valves confirming to IS 14845 as per MJP’s standard specifications combined with screw down isolating valve, small orifice elastic ball resting on a gun metal orifice nipple, large orifice vulcanite ball seating on moulded seat ring, inlet face and drilled, including insurance, third party inspection charges, loading, unloading, transportation upto departmental stores, excluding GST levied by GOI & GOM in all respect etc. complet..MJP SECTION I: PIPE APPURTENANCES . 8.a Pg 137 PN-1.0 80 mm

Supplying labour & tools for fixing C.I. double acting Air valve in trenches as per specification and direction of E/I. (C.I double acting Air valve to be supplied departmentally free of cost) JH-DWSD-SOR-3.1.42 80 mm

Supplying tools and cutting road as well restoring the same as per specification and direction of E/I (i) Pucca Road cutting- 40% of. [JH-DWSD-SOR- 3.1.19.1A]

ii) W.B.M. Road cutting- 30% of [JH-DWSD-SOR- 3.1.19.1B]

Dismentaling plain cement or lime concrete work including stacking servicable materials in countable stacks within 15 meter lead and sisposal of unservicable materials with all leads all complete as per direction of E/I.

Providing PCC M-150 in nominal mix of (1:2:4) in foundation with approved quality of stones chips 20 mm - 6mm size graded and clean coarse sand FM 2.5 to 3.0 including screening shuttering mixing cmenet concrete in mixer and placing in position vibrating striking curing taxes and royalty all complete as per building specification Same as Item no. 16

Labour charge for one cutting of cast iron pipe and specials including supplying, necessary tools and plants, chipping or filling the surface finish as per specification and direction of E/I.B211 300 mm dia pipe

350 mm dia pipe

400 mm dia pipe

450 mm dia pipe

500 mm dia pipe

600 mm dia pipe

700 mm dia pipe

750 mm dia pipe

MJP Section I(XII) - 20a 800 mm dia pipe

900 mm dia pipe

Supplying labours, tools and tackles for testing of laid C.I. or U.P.V.C or H.D.P.E. or A.C. pressure pipe upto 60metre head of water all complete as per specification and direction of E/I. (Water to be supplied free of cost departmentally) 110mm dia pipe

125mm dia pipe

140 mm dia pipe

160 mm dia pipe

180 mm dia pipe

200 mm dia pipe

225 mm dia pipe

250 mm dia pipe

280 mm dia pipe

300 mm dia pipe

350 mm dia pipe

400 mm dia pipe

450 mm dia pipe

500 mm dia pipe

600 mm dia pipe

700 mm dia pipe

750 mm dia pipe

800 mm dia pipe

900 mm dia pipe

Earthwork in excavation in foundation trenches in ordinary soil (vide classification of soil item-A) + hard soil and disposal of excaveted earth as obtained to a distance upto 50 M. Including all lifts, levelling, ramming the foundation trenches, removing roots of trees, shurbs all complete as per approved design, building specification and direction of E/I. (BCD 5.1.1+ 5.1.2)

Earthwork in excavation in ordinary rock or soft rock (where blasting is not needed) (Vide classification of soil item-C) with initial lead of 10M and lift of 1.5M including dressing making the sides in proper profile and dressing the bed in proper grade etc. all complete as per specification and direction of E/I. [JH-WRD-SOR- 7.1.12.2]

Providing and laying in cement concrete in retaining walls, return walls, walls (any thickness) including attached plaster, colums, piers, abutments, pillars, posts, struts, butteresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor etc., up to floor five leevl, exluding the cost of centering, shuttering and finishing : position cement concreate of specified grade excluding the cost of centring and shuttring - All work up to plinth level : 1:1.5:3 (1 Cement 1.5 coarse sand (zone-III) : 3 graded stone aggregate 20 mm nomainal size).

Providing 12 mm thick water proof cement plaster (1:3) with clean coarse sand of F.M. 1.5 with 5 % Cico or any other water proofing compound including screening, curing with all leads & lifts of water, scaffolding, taxes & royalty all complete as per building specification & direction of E/I.

Supplying, fitting and placing HYSD bar reinforcement in sub-structure complete as per drawing and technical specification. ]

Plain cement concrete 1:3:6 nominal mix in foundation with crushed stone aggregate 40 min nominal size mechanically mixed, placed in foundation and compacted by vibration including curing for 14 days.

Providing tor steel reinforcement of 8mm dia rods as per approved design and drawing with cuting, bending and binding with annealed wire with cost of wire removal of rust, placing the rods in position (exculuding carriage of bars to work site) all complete as per building specification and direction of E/I. TMT Fe 500 (only Valid for TATA (TISCON), SAIL, JSPL, ELECTROSTEEL Ltd, Bokaro and Vizag (RINL)).

Providing 12mm. Thick cement plaster (1:6) with clean coarse sand of F.M. 1.5 including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per building specification and direction of E/I.

Providing designation 75 B brick flat soling joints filled with local sand including cost of watering taxes royalty all completeas per building specification and direction of E/I.

Providing designation 75 A brick work in CM(1:6) in foundation and plinth with approved quality of clean coarse sand of F M 2 to 2.5 including providing 10mm thick mortar joints. cost of screening materials raking out joints to 15mm depth,curing,taxes and royalty all complete as per building specification and direction of E/I

Providing and fixing at or near ground level precast cement concrete in kerbs, edgings etc. as per approved pattern and setting in position with cement mortar 1:3 (1 Cement : 3 coarse sand), including the cost of required centering, shuttering complete. 1:1.5:3 (1 Cement: 1.5 coarse sand (zone-III) : 3 graded stone aggregate 20 mm nominal size). [JH-BCD-SOR-5.3.4]

Filling in foundation trenches and plinth in layers not exceeding 150mm thick well watered, rammed, fully compacted and fine dressed with earth obtained from excavation of foundation trenches within a lead of 50M and lift of 1.5M all complete as per building specificfation and direction of E/I. (Mode of measurement compacted volume) [JH-BCD-SOR-5.1.7]

Carriage of materials:- (a) Cement from Jamshedpur to work site.

(b) Sand from Subernarekha river.

(C ) Stone chips from Hata to work site .

(d) Bricks

(e) Steel from Jamshedpur to work site

O&M charge for 1st year

O&M charge for 2nd year (1st Year x 1.06)

O&M charge for 3rd year (2nd Year x 1.06)

O&M charge for 4th year (3rd Year x 1.06)

O&M charge for 5th year (4th Year x 1.06)

Add GST @18%

Add Labour Cess @1%

shyan Engineers Project Private Limited

RADHE CONSTRUCTION