REPAIR TO WOODEN FURNITURE UNDER GE (CENTRAL) BANGALORE

WOODEN CHAIRS M&L for removal of existing broken/unserviceable front leg of chair dining (FD-279, 228 & 203), replacing the same with new front leg, made out of 460 x 55 x 30mm 1st class hard wood (Teak) made to shape for chair dining and all exposed surfaces duly french polished and fitted as shown in drg including provn of a hard rubber ring screwed at the bottom of the new leg, complete all as specified and directed.

M&L for removal of existing broken/unserviceable rear leg of chair dining ( FD-279, 228 & 203), replacing the same with a new rear leg, made out of 890 x 55 x 30mm 1st class hard wood (Teak) made to shape with the existing leg and all exposed surfaces duly french polished and fitted as shown in drg including provn of a hard rubber ring screwed at the bottom of the new leg, complete all as specified and directed.

M&L for removal of existing broken top back rest of chair dining (FD-279, 228 & 203) and replacing the same with a new back rest made out of 405 x 45 x 35mm tapering to 405 x 45 x 15mm 1st class hard wood (Teak) made to shape by slightly concaving and all exposed surfaces duly french polished and fitted all as shown in drg complete all as specified and directed. Note : Each back rest shall be measured as seperate unit

M&L for removal of the existing broken front rail of the seat of chair dining (FD-279, 228 & 203) and replacing the same with a new one made out of 440 x 30 x 65 mm in 1st class hard wood (Teak) made to shape, provided with 3mm dia holes for caning @ 12.5 mm C/C and all exposed surfaces duly french polished and fitted as shown in drg complete all as specified and directed.

M&L for removal of existing broken back rail of the seat of chair dining (FD-279, 228 & 203) and replacing the same with a new one made out of 405 x 30 x 65 mm 1st class hard wood (Teak) made to shape provided with 3mm dia holes for caning @ 12.5 mm C/C and all exposed surfaces duly french polished and fitted as shown in drg complete all as specified and directed.

M&L for removal of existing broken, side rail of the seat frame of chair dining (FD-279, 228 & 203) and replacing the same with a new one made out of 430 x 30 x 65 mm 1st class hard wood (Teak) made to shape provided with 3mm dia holes for caning @ 12.5 mm C/C and all exposed surfaces duly french polished and fitted as shown in drg complete all as specified and directed.

M&L for removal of existing/broken bottom stiffener complete of chair dining (FD-279, 228 & 203) and replacing the same with new stiffeners made out of 25 x 20 mm 1st class hard wood (Teak) having a length of 430 mm and all exposed surfaces duly french polished and fitted as shown on drg complete all as specified and directed.

All as per item No. 1 here-in-above but replacing front leg of chair writing (FD-280 & FD-250) with new leg made out of 685x55x30mm complete all as specified and directed.

All as per Item No. 2 here-in-above but replacing the rear leg of chair writing (FD-280 & FD-250) with new leg made out of 890 x 30 x 55mm.

All as per Item No. 3 here-in-above but replacing the back rest of chair writing (FD-280 & FD-250) with new back rest made to shape to 50 x 15mm out of 50 x 35mm complete all as specified and directed.