Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹22.4 LAccepted-AOC | L1 | Accepted-AOC Reasonable rate | |
| 2 | L2₹23.3 L+₹85,384.50 (3.80%)Rejected-Finance KEZO TOWN CHAKABAMA NEAR 1063 FD WORKSHOP GREF KOHIMA 797001 NAGALAND | KOHIMA | KOHIMA | NAGALAND | 797001 | L2 | Rejected-Finance Quoted amount higher than L1 | |
| 3 | L3₹23.9 L+₹1.5 L (6.52%)Rejected-Finance | L3 | Rejected-Finance Quoted amount higher than L1 | |
| 4 | L4₹24.1 L+₹1.7 L (7.42%)Rejected-Finance | L4 | Rejected-Finance Quoted amount higher than L1 | |
| 5 | L5₹28.5 L+₹6.0 L (26.7%)Rejected-Finance C O VAUDE VILLE HARDWARE OPP IOC DZUVURU KOHIMA NAGALAND 797 001 | KOHIMA | KOHIMA | NAGALAND | 797001 | L5 | Rejected-Finance Quoted amount higher than L1 |
Tender Value
₹22.5 L
EMD Value
₹45,000
Closing Date
24 Aug 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Col N K Chaudhary
HQ 137 WKS ENGR PIN 914137 CO 99 APO
PROVN OF COOK HOUSE FOR TPS INCL ELCT FITTING, WASHING PTS AND PLUMBING WKS NEAR BLDG NO T 221 AT ZAKHAMA MIL STN
2023_MES_610003_1
8582/E8
Open Tender
Civil Works
Item Rate
180 days
Zakhama
Please refer Tender documents.
6 documents required · 6 mandatory
₹500
AGE (I) Zakhama
₹45,000
Yes
3 Oct 2023
21 Jul 2023
31 Aug 2023
21 Jul 2023
24 Aug 2023
5 Aug 2023
Amount
Surface excavation n.exc. 30cm deep and averaging 15cm deep in soft / loose soil, and removing rubbish upto a distance n.exc. 50 m all as specified and directed.
Earth work in excavation by mechanical means (Hydraulic excavator) means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5m, as directed by Engineer-in?chage.
All as per item No 02 above but for lift exceeding 1.5m but not exceeding 3m as directed by Engineer-in chage.
Earth work in excavation by mechanical means (Hydraulic excavator)/ in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m all as specified and as directed.
Material and labour for PCC 1:2:4 type B2 (using 40 mm graded stone aggregate) as in Cement concrete as in footing, plinth beam & dwarf wall etc complete all as specified and as directed.
Returning, filling in, of soft/loose soil including spreading leveling, watering and well ramming in layers not exceeding 25 cm complete all as specified and as directed
Removing excavated soil to a distance n.exc 50M and deposited/ spreaded where directed at a level n. exc 1.5 M above the starting point complete all as specified and as directed.
Material and labour for RCC M-30 (Design Mix) (using 20mm graded stone aggregate) as in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and as directed. Note:- Design mix to be got approved from Accepting Officer before incorporation in the work.
Material and labour for RCC M-30 (Design Mix) (using 20mm graded stone aggregate) as in columns, pillars, piers, posts and struts concrete complete all as specified and as directed. Note:- Design mix to be got approved from Accepting Officer before incorporation in the work.
Material and labour for use and waste of form work to sides of pillars, posts, struts, piers, piers, columns and stanchions of square, rectangular or polygonal shape with rough finished surfaces of concrete complete all as specified and as directed.
Material and labour for use and waste of formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter with rough finished surfaces of concrete, flat complete all as specified and as directed.
Material and labour for mild steel TMT bars 10mm dia and over, cut to length bent to shape required, including cranking bending spirally for hooping for columns , hooking ends and binding with and including mild steel wire (annealed) not less than 0.90mm dia or securing with clips complete all as specified and as directed.
Material and labour for mild steel TMT bars 6mm to 8mm dia, cut to length bent to shape required, including cranking bending spirally for hooping for columns , hooking ends and binding with and including mild steel wire (annealed) not less than 0.90mm dia or securing with clips complete all as specified and as directed.
Material and labour for Mild steel TMT bars 5mm dia. and over upto and including 10mm dia in stirrups, spacers and binders and binding with and including mild steel wire (annealed) not less than 0.90mm dia or securing with clips complete all as specified and directed.
Material and labour for brick work with sub class `B` bricks, old size, straight or curved on plan exc 6m mean radius built in cement mortar (1:6) complete all as specified and as directed.
Material and labour for RCC M-30 (Design Mix) (using 20mm graded stone aggregate) as in beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and as directed. Note:- Design mix to be got approved from Accepting Officer before incorporation in the work.
Material and labour for use and waste of formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc with rough finished surfaces of concrete flat complete all as specified and as directed.
Material and labour for RCC M-30 (Design Mix) (using 20mm graded stone aggregate) as in Chajjas complete all as specified and as directed. Note:- Design mix to be got approved from Accepting Officer before incorporation in the work.
Material and labour for use and waste of formwork to chullah hoods, chajjas, troughs and similar items including edges with rough finished surfaces of concrete flat complete all as specified and as directed.
Materials and labour for 10 mm thick rendering on other than fair faces of brick work or concrete surface as on wall in cement mortar (1:6) and finished the surfaces even and smooth without using extra cement complete all as specified and as directed.
Material and labour for 15mm thick rendering in CM (1:4) on brick work or concrete surface as on wall mixed with integral water proofing compound @ 3% by wt of cement, finished the surface even and fair complete all as specified and directed. (Note:Water proofing compound shall be measured & paid separately)
Supply only integral water proofing compound (WPC) of best quality (ISI marked) complete all as specified and as directed.
Supply and fix 125x60mm size pressed steel, frames for door with one or more rebates including necessary fixing lugs, hinges,lock strike plate, etc, complete all as specified and as directed.
Supply and fixing for factory made 35mm thick second class hardwood plain framed panelled shutters (two panels) with lock rail and panel of 9 mm B.W.P commercial ply or 12 mm thick veenered particle board with commercial veenering on both faces. The size of rail and stiles shall be as per IS: 1003 (Part-I), kiln seasoned and chemically pressure treated complete all as specified and as directed.
Supply and fixing steel ventilator with top hung shutter including hinges, steel peg stay, complete all as specified and as directed.
Supply and fixing 5.50 mm thick sheet glass, and securing in wooden / metal frame ordinary quality and glazing with oil putty, glazing pin or beads as required etc in square exe 0.50 Sqm in each pane complete all as specified and directed.
Supply and fixing 100mm size mild steel butt hinges medium weight, cold rolled complete all as specified and as directed.
Supply and fixing aluminium anodized, barrel tower bolts, 200mm long and 10mm dia of extruded section complete all as specified and as directed.
Supply and fixing extruded aluminium alloy handles, fabricated type, anodised 150mm size complete all as specified and as directed.
Supply and fixing 300mm long Aluminium alloy, anodised, sliding door bolt with hasp staple (Bolt type) and fixing clips of sheet, cast or extruded section or cast aluminium alloy and fixed complete all as specified and as directed.
Material and labour for mild steel works as in bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required: hooks (stay), heavy, for large gates; hook and pintle hinges: large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165 complete all as specified and as directed.
Materials and labour for preparation of newly plastered surfaces of wall and applying three coats of white wash complete all as specified and as directed.
Material and labour for preparation of newly plastered wall surfaces and applying two coats of Cement Based paint over a coat of Alkali Resistant Primer complete all as specified and as directed.
Material and labour for preparation of new steel surfaces to receive painting over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and directed.
Material and labour for preparation of new wooden surface exc 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed.
Material and labour for broken stone hardcore of gauge n.exc 63mm, deposited, spread and levelled in layers n.exc 15cm thick, watered and rammmed to a true surface complete all as specified and as directed.
Material & Labour for 75mm thick, PCC 1:4:8, Type D-2, using 40mm graded aggregate as in sub base etc. surface finished even and fair without using extra cement complete all as specified and as directed.
Material and labour for 20-25 mm thick machine cut kota stone slab shall be laid on floor, laid and jointed with grey cement slurry mixed with pigment to match the colour / shade of the slab over and including 20mm thick screed bed / bedding layer in cement mortar (1:4) with roughening of surface, including rubbing and polishing complete all as specified and as directed.
Material and labour for 20-25 mm thick machine cut kota stone slab shall be laid on wall / column / vertical surfaces, laid and jointed with grey cement slurry mixed with pigment to match the colour / shade of the slab over and including 10mm thick plastering / backing coat in cement mortar (1:4) with roughening of surface, including rubbing and polishing complete all as specified and as directed.
Material & Labour for 75mm thick, PCC 1:3:6, Type C-1, using 20mm graded aggregate as in Plinth protection etc surface finished even and smooth without using extra cement and providing necessary joints 12mm wide to the full depth of PCC at every 3 meters and every change of directions and the joints duly filled with mastic filling comprising of 01 Part of heated bitumen blown grade any penetration and 3 parts of sand [all by weight] complete all as specified and as directed.
Material and labour for rolled mild steel for roof trusses ( framed), trussed, purlins, crane grantries, rails and fastenings and heavy bracket framing (beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. conforming to Fe 410-W (Gde-E-250) quality-A complete all as specified and directed.
Supply and fixing 0.50mm thick pre-painted galvalume aluminium Zinc coating GI based corrugated / semi corrugated steel sheet of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as per manufacturer instruction complete all as specified and as directed.
Supply and fixing 0.50mm thick pre-painted galvalume aluminium Zinc coating GI based plain steel sheet of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws as per manufacturer instruction complete all as specified and as directed. Note:-To be executed for provision of ridges, valley gutter, gutter down pipe,corner trim, L flashing and apron flashing etc.
Material & Labour for use and waste of form work to soffits of suspended slab such as roof slabs, floor slabs, landing and similar work, etc. not exceeding 200mm thick (Horizontal or sloping) with rough finished surfaces of concrete flat complete all as specified and as directed.
Material & Labour for use and waste of formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 10cm wide and sides of RCC/PCC bands in walls, horizontal or sloping and similar work exc 5cm but n exc 10cm wide with rough finished surfaces of concrete complete all as specified and as directed.
Supply and fixing 15mm bore galvanised steel water tubing medium grade including all fittings and fixed complete to walls/ceiling or laid under floors complete all as specified and as direcetd.
Supply and fixing 20mm bore galvanised steel water tubing medium grade including all fittings and fixed complete to walls/ceiling or laid under floors complete all as specified and as direcetd.
Supply, hoisting and fixing in proper position ISI marked three-layer rotational moulded polyethylene water storage tank (cylindrical vertical with closed top), of capacity 1000 litres with and including 25mm bore PTMT float and ball valve set including providing necessary connections after taking down existing PVC tank complete all as specified and as directed .
Supply and fixing 15mm bore stop valve, cast copper alloy, screwed down high pressure, with crutch or butterfly handle screwed both ends fixed to GI pipe complete all as specified and as directed by the Engr-in-Charge.
Excavation in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in soft/loose soil etc complete all as specified and as directed.
Material and labour for PCC (1:4:8) type D2 (using 40 mm graded stone aggregate) as in foundation filling and mass concrete complete all as specified and as directed.
Materials and labour for 15 mm thick rendering on other than fair faces of brick work or concrete surface as on wall in cement mortar (1:6) and finished the surfaces even and smooth without using extra cement complete all as specified and as directed.
M&L 25mm thick PCC 1:2:4 type B-0 (using 12.5 mm graded stone aggregate as in drains finishing even and smooth including necessary formwork complete all as specified and directed.
Materials and labour for PCC 1:2:4 type B1 (using 20 mm graded stone aggregate) as in coping including necessary formwork complete all as specified and as directed.
M&L for precast cement concrete 1:2:4 type B1 (using 20 mm graded stone aggregate as in cover slab for manholes, drains etc, set in cement mortar 1:6 including necessary formwork complete all as specified and directed.
Material and labour for point wiring (surface type) for one light/fan/call bell point with 1.5 sqmm PVC insulated (FR-LSH) unsheathed copper cable multistranded conductor 1100 volts grade controlled by one way switch including 1.5 sqmm PVC (FR-LSH) insulated unsheathed copper cable multistranded conductor 1100 volts grade for continuity earth wire connected to common earth dolly drawn through and including PVC casing caping of suitable size with all accessories and PVC rectangular boxes for mounting switch, socket and fan regulator etc complete all as specified and as directed. Note: (i) Wiring shall be done in proper colour coding using red , yellow, blue for phase, black for neutral and green for earth. (ii) The cost of making good the disturbed surfaces is deemed to be included in the quoted rate.
All as per item No 56 above but 15 Amp switch Socket combination by using 2.5 sqmm copper cable with 2.5 sqmm earthing wire complete all as specified and directed.
All as per item No 56 above but for 3 pin,5 Amp switch Socket outlet on independent board complete all as specified and directed.
Supply & fixing Switch socket combination 2 in 1, 5 pin and 15 Amp flush type universal controlled by one switch flush type complete all as specified and directed.
Supply & fixing Switch socket combination 2 in 1, 3 pin, 5 Amp flush type universal controlled by one switch flush type complete all as specified and directed.
Supply and fixing LED lights fitting 1x 20W, 220V,with necessary fitting and fixtures including LED tube light connecting up with three core flexible copper conductor cable including PVC flexible hose of suitable size from ceiling rose complete all as specified and directed.
Supply & fixing switch piano flush type (ISI marked), single pole, one way 5 Amp, 240 Volts complete all as specified & directed.
Supply and fixing ceiling rose, PVC/polycarbonate, isolated body surface bakelite, 65mm x 25mm, ISI marked three terminals complete all as specified & directed.
Supply and fix exhaust fan, steel body AC single Phase. 230V of size 450m sweep with, blades, and frame and louvers including testing etc complete all as specified & directed.
Supply & Fixing MCB DB, SPN, 8 Way, 240 Volts, with DIN Channel, Double Door with 200 Amps rated bus bar suitable for mounting MCBs flush mounted with wall including making good disturbed surfaces complete all as specified and as directed.
Supply & Fixing MCB SPN 40 to 63 Amps having breaking capacity 10 KA, 240 Volt 'C' Curve complete all as specified and directed.
Supply and fixing MCB, single pole 6 to 32 Amps having breaking capacity 10 KA, 240 volts, 'C' Curve complete all as specified & directed. Note for serial Item No. 65 to 67: MCB and MCB DB shall be of same make as approved by AGE (I).
Supplying and fixing 1100 volts grade heavy duty twin core 16 sqmm cable PVC insulated aluminium stranded conductor, served with inner sheathing of PVC tape and overall PVC sheathed in service connections suspended by insulating hangers not more than 1 metre apart including 4mm suspension wire complete all as specified & directed.
Supply and fix submain wiring with 2X6 sq mm along with earth wire 1X 6 sq mm FRLSH, PVC insulated copper conductor, single core, 1100 volt grade , surface drawn in and including PVC casing capping with fixtures and connected to common earth . complete all as specified and directed. (Note : (i) Three runs of 6 Sqmm cable and one run of PVC Casing capping of suitable size shall be measured as one unit. (ii) Wiring shall be done in proper colour coding using red , yellow, blue for phase, black for neutral and green for earth. (iii) The cost of making good the disturbed surfaces is deemed to be included in the quoted rate.)
Supply and fix submain wiring with 2X4 sq mm along with earth wire 1X 4 sq mm FRLSH, PVC insulated copper conductor, single core, 1100 volt grade , surface drawn in and including PVC casing capping with fixtures and connected to common earth . complete all as specified and directed. (Note : (i) Three runs of 4 Sqmm cable and one run of PVC Casing capping of suitable size shall be measured as one unit. (ii) Wiring shall be done in proper colour coding using red , yellow, blue for phase, black for neutral and green for earth. (iii) The cost of making good the disturbed surfaces is deemed to be included in the quoted rate.)
Supply and fix electric water heater, storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, connection piece etc.complete all as specified and as directed.
Material and Labour for House service bracket (hook type complete with 3.0m long G.I. pipe 40mm dia Medium grade, two nos. 90 degree bends, M.S. hook and stay or guy complete all as specified and as directed.
Supply and fixing LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specified and as directed.
Materials and labour for earthing complete with galvanised iron earth plate electrode 600 mm x 600 mm x 6 mm thick, burried directly and preferably vertically in ground, earth pit not less than 2.25 Mtr deep below ground level with top edge of the plate not less than 1.5 m below ground level connetced with galvanised wire of 4mm dia by means of nuts, bolts, check nuts and washers made of galvanised iron or steel earthing lead to be protected by galvanised iron pipe of 15mm bore (light grade) and other end connected to earthing test point or lightening arrestor or main controlling switch as directed including providing funnel with 20mm bore galvanised iron pipe (medium grade), wire mesh, charcoal or coke and common salt in alternate layer of 15cm (compacted thickness) all round the earth electrode, concrete earth pit in PCC (1:3:6) type C-1 (with 20mm graded aggregate), 50mm thick precast RCC (1:2:4) cover slab (re-inforced with 8mm dia TMT bar @ 15 cm C/C bothways and suitable handle made of 10mm dia) including necessary earth work in excavation, returning filling and removal of surplus earth upto a distance not exceeding 50 m etc all as shown on electrical plate No. 3 of MES Schedule Part-I(2009) complete including testing on completion all as specified and as directed. Notes:- (i) Main earthing strip from earth plate electrode to rest point upto length of 7.5 meters length shall deemed to be included in the unit rate quoted against this item. (ii) On testing after completion if the desired resistenance is not obtained the contractor shall redo the earthing without any extra cost to the department.
M/S Yhobu Entrepreneur
commercial enterprises
das enterprises
ZEVIZO ZUTSO
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .