SPL REPAIR TO ROAD FROM RP GATE TO REGT MANDIR APPROX LENGTH 150 METER and WIDTH 5.50 METER AT GE NAMS

Material and labour for Repair to pot holes any depth, n.exc 1 sqm each including sweeping free from dust and mud, or water, scoring sunken surfaces in roads, paths, etc cutting around edges at least 25 mm in depthand making good by applying tack coat with bituminous primer @ 5Kg per 10 Sqm, putting in premix as specified for thin bituminous carpet (2cm thick), well rammed and sealed with premix sand seal coat (9.8 Kg of binder with 0.09 cum of sand 6.3mm size ) again well rammed complete, all as specified and directed.

Scarifying or picking gravelled macadam or bituminous macadam surfaces not exceeding 50mm deep in area exc 400 Sqm complete all as specified and directed.

Material and labour for preparing unsurface surface of water bound macadam or bituminous macadam surface by brushing with wire brushes for removing caked mud etc. sweeping with broom and finally fanning the cleaned surface with gunny bags to remove all losse dirt etc complete all as specified and directed

Material and labour for applying evenly a priming tack coat of VG-10 @ 10 KG per 10 sqm complete all as specified and directed.

Material and labour Premixed bituminous, macadam laid/rolled and compacted to required gradient and camber using 20mm graded stone aggregate and paving bitumen @ 4% by the weight of total mix (consolidated thickness 75mm thick or less or as required) with 10 to 12 ton power roller complete, all as specified and directed.

Materail and labour for bituminous premix semi dense asphaltic concrete 30 mm (minimum consolidated thickness) with 5.5% binderpaving bitumen (VG - 30) content by weight of total mix, using hot mix plant and spreading with machenical paver rolled and compacted to required camber and gradient and for uniform smooth surface by using power roller 8 to 12 tonne capacity completed all as specified and directed. Note :- (a) Material for SDAC shall be mixed in hot mixing plant. (b) Mix design of bituminous SDAC will be got done from approved lab. (c) The premix carpet shall be laid with mechanical mixer as specified in clause 20A27 of MES SSR Part-I the spreading of premix carpet shall be done by mechanical sensor only.

Supply and fixing in repair for cat eye reflective type metal body alloy of size 100mm x 100mm x 20mm with PAMA striplens reflector of model No DA 972.0 or equivalent/from makes mentioned in particular specifications fixed with & including MS stud of suitable size as per manufacturer instructions complete, all as specified and directed.

Material and Labour for preparaton of bituminous surfaces of roads and marking 2.5mm thick centre line, stop lines dashes, arrows etc and the like n exc 10cm wide on roads pavements, with hot applied thermo plastic road marking paint of approved colour confirming to BS 3262-1989 with special applicator machine all as per manufactures instruction complete, all as specified and directed.