Providing improved access to water through household connections in existing water supply scheme Rajgarh of Block Nabha, Distt Patiala under sub component 2a (i) of Punjab Rural Water Supply and Sanitation Sector Improvement Project.

Amount

Component -1

Repair of Pumping Machinery complete in all respects.

Repair of Panel Board complete in all respects.

Repair of Pump Chamber

White washing (two coat)

Painting two coats with synthetic enamel paints in all shades on old wood work or metallic or plastered or concrete surface to give an even shade including rubbing down old paint.

With special quality paint

Distempering with dry distemper of approved manufacture two coats over one priming coat to give an even shade.

Applying Pink Primer or-aluminium priming coat including preparation of surface With special quality paint

Painting two coats excluding priming coat with ready mixed paint in all shades on new wood work With special quality paint.

Applying priming coat with methal primer on new steel or iron work incluing preparation of surface and Painting two coats with ready mixed paint for metallic surfaces in all shades on steel or iron work with special quality paint.

Providing & fixing Single air valve ISI Marked as per IS-14845 including jointing , cost of nut bolts & rubber insertion all carriages complete.

C.I Single air valve screwed (Size 40mm)

P/F Electric Fan & Tube set ISI Marked equivalent to Crompton

Repair of OHSR

One No. RCC OHSR 75000 ltrs capacity having height 22.00 mtr up to FSL and 19.00 m upto bottom slab has been already exists at site. The Repair of OHSR has been taken in this estimate.

Painting of C.I Pipes and Specials complete in all respects

Repair of expansion joint

Relacement of CI Sluice valve

Cleaning of OHSR from inside with soidum hyprochloride complete in all respect.

P/F MS Jali on top of OHSR ventilator

Development of Water Works

Providing & fixing G.I. Barbed wire 3 ply fencing around the head works site in three rows complete in all respects including cost of winding wire & aluminum painting complete in all respects as per standard Drawing D-6 & 8 (as per Analysis A-6)

Construction of masonry Corner pillar including cost of cement pointing as per standard drawing D-3 & Analysis of Rates A-5 complete in all respects.

Providing & fixing angle iron pickets with angle 40mm x 40mm x 6mm including cost of concrete & painting complete in all respects as per standard Drawing.

Providing & fixing D.Hook complete with MS Bolts size 300mm x 18mm as per standard Drawing D-7 & Analysis A-7

Providing, installing, testing & commissioning of one No. Electronically actuated, Diaphragm Operated, Metering system, Chemical Doshing Chlorinator, suitabel for delivering 0.5 to 6 Liters of Bleaching Powder Solution/ Sodium Hypo solution per hour under maximum delivery pressure upto 7 kg.cm2, and suction lift not less then 1.5, as per DWSS standard specifications.

Repair and Removing of leakage in existing pipe lines including earth work, bailing out water and with material such as PVC Pipe, Tee, Bend & CI D-joints complete in all respects.

Supplying,fixing and testing at site Automatic electronic type water level indication system with gun metal float sensor and electrical cable suitable for three phase pump submersible / monoblock to be fixed on existing panel for OHSRs complete in all respects.

Component -2

Providing proposed water connection to house hold up to wall with providing, laying jointing, testing MDPE pipe lines 15mm i/d=2.00 mtr & G.I. Pipe lines 15mm i/d = 2.50 mtr including cost of specials such as tees, bends, sockets, elbow etc. cutting, threading, and testing in trenches in the ground and ISI marked 15mm i/d GM ferrule as per IS: 2692 and 3" i/d clamp with C.I. bib cock 15mm i/d as per IS:210 with stainless steel spindle of approved make as per CSR 30.65(b) complete (On Existing Pipeline)

Component-3

Providing & fixing PVC Pipes & Specials 6Kg / cm2 including cost of earth work in excavation & back filing complete.

Providing & fixing C.I/D.I Flanged end, stem of SS (AIS 1410) and Bronze(gunmetal) working parts Sluice Valves ISI marked 14846-2000, including jointing , testing & cost of Nut ,Bolt & insertion sheet, all carriage complete (with the approval of Engineer in-charge).

Class PN-1 as per ISI

80mm i/d Sluice Valves flanged

100mm i/d Sluice Valves flanged

Construction of Brick masonry SV Chamber size 0.90x0.90 m complete in all respects.

Dismantling Brick or flanged stone flooring without concrete base as per CSR item No 8.19 & Dry brick on edge on paving with the dismantled bricks including sand grouting complete in all respects.

Dismantling of cement concrete 80mm thick cement concrete 1:2:4 over 100mm thick C.C. 1:8:16 and making good the same to its original condition complete in all respects.

Providing proposed water connection to house hold up to wall with providing, laying jointing, testing MDPE pipe lines 15mm i/d=2.00 mtr & G.I. Pipe lines 15mm i/d = 2.50 mtr including cost of specials such as tees, bends, sockets, elbow etc. cutting, threading, and testing in trenches in the ground and ISI marked 15mm i/d GM ferrule as per IS: 2692 and 3" i/d clamp with C.I. bib cock 15mm i/d as per IS:210 with stainless steel spindle of approved make as per CSR 30.65(b) complete (On Proposed Pipeline)

Providing and Fixing of New sign board as per DWSS Specifications.