CERTAIN B/R REPAIRS MD ACCN AT STATIC WKSP EME, DEMO BN AND OTHER MD ACCN AT AGE B/R IV UNDER GE AWC MHOW.

Amount

Demolition of brickwork or stone boulder masonary built in cement mortar including all quoins, arches, pillars etc. complete all as specified and directed.

M&L for Brickwork with sub class ‘B’ (old size) bricks, straight or curved on plan exceeding 6 metre mean radius built in cement sand mortar 1:6 complete all as specified and directed.

M&L for Brick work with sub class ‘B’ bricks, straight or curved on plan any radius in half brick thick wall with old size bricks built in cement mortar 1:4 complete all as specified and directed.

Taking down cement plaster of any description including raking out joints, hackisng for key, scrubbing down with water etc. complete all as specified and directed.

M&L for Rendering 15 mm thick in cement and sand mortar 1:6 on fair faces of brick work or cement concrete surfaces including finishing the surface even and smooth without using extra cement complete all as specified and directed.

M&L for Rendering 5 mm thick in cement and sand mortar 1:3 on concrete surfaces of ceiling including finishing the surface even and smooth without using extra cement complete all as specified and directed.

M&L for Preparation of new plastered surfaces of wall applying two coat of oil bound distemper over one coat of alkali resistant paint & inculding 1mm thick wall care putty on wall complete all as specified and directed.

M & L for preparation of newly plastered surfaces or previously untreated surfaces of ceiling and applying three coats of white wash on ceiling, complete all as specified and directed.

Preparation of newly plastered surfaces of walls and applying two coats of cement base paint complete all as specified and directed.

Demolition of cement concrete (un-reinforced) in ground floors and paving not exceeding 15 cm thickness (below or above ground level ) complete all as specified and directed.

Roughening surfaces of old concrete floor by picking,sweeping clean and washing down with water to remove dust, etc complete all as specified and directed.

Brushing neat cement slurry with 3.0kg of cement per sq. metre complete all as specified and directed.

M&L 75mm thick PCC 1:4:8, type D-2 as in sub base for pavement, path, floor etc. complete all as specified and directed.

M & L for sand filling under floors or in fdn including watering and consolidation as in bedding layers for laying tiles complete all as specified and directed.

M&L for factory made Machine pressed precast concrete interlocking paver blocks any shape and size confriming to IS 15658-2006 of 60mm thickness coloured chemically treated PCC (ISI Marked ) M-35 grade of desgin & pattern approved by GE as in footpath and filling of joints with Narmada fine sand complete all speciified and directed.

M&L for 75 mm thick PCC 1:3:6 type C-2 (using 20 mm graded stone aggregate) as in plinth protection, surface finished even and smooth without using extra cement, laid in panels n exc 3 mtr long and joints shall be filled with the mixture of bitumen and sand in (1:3) by weight, complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) and removing rubbish off premises complete all as specified and directed.

M & L Rendering 10 mm thick in cement and sand mortar 1:4 on fair faces of brick work or cement concrete surfaces for receiving of tiles using extra cement complete all as specified and directed

M&L for glazed ceramic tiles coloured digital with highlighter and approved design and pattern by G E of size 450x300 x 7mm thick on walls etc, set & jointed in neat cement slurry and pointed in white or colours cement to match the colour of tiles, complete all as specified and directed

M&L for glazed ceramic tiles coloured of size 300 x 200x 7mm thick in walls etc, set & jointed in neat cement slurry and pointed in white or colours cement to match the colour of tiles, complete all as specified and directed

M & L 25 mm thick PCC 1:2:4 type B-1, using 20 mm graded stone aggregate, including finishing surface of concrete topping even and rough as in screed bed complete all as specified and directed.

M&L for screed bed 15mm thick in CM 1:6 complete all as specified and directed.

M&L for non skid cramic colured of size area of each tile exc 0.18 sqm but not exc 0.38 sqm in flooor etc, jointed in neat cement slurry and pointed in white or colours cement to match complete all as specfied and directed

M&L for non skid cramic tiles colured of size area of each tile exc. 0.18 sqm but not but not exc 0.38 sqm in skriting ok dado jointed in neat cement slurry and pointed in white or colours cement to match complete all as specfied and directed

M&L for non skid-ceramic / Endoura tiles coloured of size area of each tile exc.0.06 sqm but not exc . 0.11 sqm (300 x 300 mm) X 10mm thick in floors etc, set & jointed in neat cement slurry and pointed in white or colours cement to match complete all as specified and directed

S & F in repair light coloured vitreous china WHB white oval shape of 500mmx400mm (minimun) on new brackets excluding taps waste china & plug including bracket etc complete all as specified and directed.

Supply and fixing in repair Vitreous China squatting pan “Orissa pattern” size 580x440mm white with integral foot rest (excluding flushing cistern and flush pipe) with CI ‘P’ trap of long arm of suitable size including connection to flush pipe, anti symphonic pipes and bed concrete etc complete all as specified and directed.

Supply and fixing in repair Vitreous China wash down water closet pan (Pedestal Pattern) and trap (standard pattern) coloured as approved including connection to drain (or outgoing pipe) and to flushing pipe anti symphonize pipe etc. including plastic water closet seat, white/black, closed pattern with flat bottom and cover and mild steel chromium plated or aluminium hinging device and jointingcomplete with fixing bolts complete all as specified and directed.

Supply and fixing in repair Plastic water closet seat,any colour as available, closed pattern with flat bottom and cover and mild steel chromium plated or aluminium hinging device and jointing complete all as specified and directed.

S&F in repair CP brass health faucet fitted with bracket, screwed down for iron pipe or for brass ferrule complete all as specified and directed.

Supply & fixing in repair Jet spray for water closet pan pedestal pattern in repair complete all as specified and directed.

S & F in repair PVC low level flushing cistern, valveless, syphonic action type, 10 litres capacity with inlet, ball valve float and handle with and including brackets & PVC bend pipe 90 cm long etc, complete all as specified and directed.

S & F in repair Sink with drainage board made out of stainless steel 1.00 mm thick sheet for kitchen with plugs, washers and wastes including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm with bowl size 410 mm x 330mm x 160mm supplied and fixed in repairs complete all as specified and directed.

S&F in repair stainless steel kitchen plate rack made out of 1mm thick stainless steel of size 900 x 600 mm of best quality of approved make complete all as specified and directed.

S&F in repair Tubular towel rail aluminium anodised 20 mm dia D-type 60 cm long between flanges, including brackets and fixed to walls, complete all as specified and directed.

S&F in repair PVC connection 15 mm size, of length 450 mm, with PTMT nuts complete all as specified and directed.

M & L in repair 32 mm bore waste coupling with fittings, brass, chromium plated for galzed ware sinks, basins etc with long screwed shanks and fly nuts, flange end bedded in red lead cement and other end fixed complete all as specified and directed.

S&Fixed in repair PVC Flexible waste pipe 32 mm dia with socket for steel sink upto floor level and length not less than 0.60 M complete all as specified and directed.

S&F in repair Stainless steel gratings 100mm bore size fixed with cement motar complete all as specified and directed.

Taking up or down steel tubing and connections, 15 mm bore fixed on walls, floors or ceiling etc complete all as specified and directed.

Taking up or down steel tubing and connections, 20 mm bore fixed on walls, floors or ceiling etc complete all as specified and directed..

S & F in Repairs 16 mm bore of pipes 3-layer PP-R (Polypropylene random copolymer) pipes SDR 7.4 & SDR 11 UV stablised and antimicrobial welded having thermal stability for hot and cold water supply including all PP-R plain and brass threaded polypropylene random fittings fixed complete to walls, ceiling, or in floors etc complete all as specified and directed.

S & F in Repairs 20 mm bore of pipes 3-layer PP-R (Polypropylene random copolymer) pipes SDR 7.4 & SDR 11 UV stablised and antimicrobial welded having thermal stability for hot and cold water supply including all PP-R plain and brass threaded polypropylene random fittings fixed complete to walls, ceiling, or in floors etc complete all as specified and directed.

M & L in repair Stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle screwed both ends for iron pipe or for unions, for bore dia of pipe 15 mm, complete all as specified and directed.

S & F in repair CP Bib taps, with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule, for bore dia of pipe 15mm, complete all as specified and directed.

S & F in repair CP Pillar taps fancy type with capstan head, CP, screwed down high pressure with or without lettered ‘Hot’ or ‘Cold’ with long screwed shanks and fly nut, screwed for iron pipe 15 mm bore, supplied and fixed in repairs, complete all as specified and directed.

S & F in repair, Ball valves, high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball, screwed for iron pipe 20 mm dia (minimum weight 210 gms) complete all as specified and directed.

Taking down chowkhats or frames with shutters (without taking off shutters from the frames) of size n. exc 1.5 Sqm each and removing from site complete all as specified and directed.

Taking down chowkhats or frames with shutters (without taking off shutters from the frames) of size Exceeding 1.5 sqm and not exceeding 4.00 sqm each and removing from site complete all as specified and directed.

Taking down shutters of any description, area exceeding 1 sqm and not exceeding 2.00 sqm each complete all as specified and directed.

M&L for taking down and refixing in same opening wood shutter exc 1 sqm but not exc 2.00 sqm including easing & adjusting and refixing with same hardware ect. complete all as specified and directed.

Description same as per Item No. 51.00 but n.exc 1 sqm complete all as specified and directed.

M & L PCC 1:3:6 type C-1 using 20mm graded stone aggregate for hold fast blocks, including necessary form work for rough finished surfaces etc complete all as specified and directed.

M & L 35mm thick, IInd class hard wood plain, framed, panelled factory made shutters (two panel) with lock rail and panel of 12mm veneered particle board with commercial veneering on both faces. The size of rails and styles as per IS-1003 (Part-I) kiln seasoned and chemically pressure treated complete all as specified and directed.

M & L 35 mm thick, 2nd class hard wood , glazed & skeleton factory made shutters, open rebated & prepared to receive glass, gauze etc. (without sash-bars), edges of framing plain, chamfered or rounded fitted with cut and metred beads for securing glass etc., sizes of members of shutters as specified in SSR Part-I, Section-8, clause 8.20(a) complete all as specified and directed.

S&F 35 mm thick factory made flush shutter, solid core construction with particle board core and ply wood face panels commecial type on both sides complete as specified and as directed.

S&F Solid PVC Door frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube, complete all as shown in drawing of relevant item in MES, schedule Part-II , 2020 as specified and as directed

S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail. Panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement complete all as shown in drawing of relevant item in MES, schedule Part-II , 2020 as specified and as directed

S&F 2nd class hardwood Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed complete all as specified and directed.

M&L Granite stone 18- 20 mm thick(of any type) work (table rubbed and polished) for wall lining (Veneering to wall) and laid on cill of parapit wall over 12 mm thick in cement mortar (1:3) and pointing with white cement (1:2) using marble dust with admixture of pigment to match with shade of granite colour as per direction of GE, complete all as specified and directed.

M & L for reparing of RCC projection, chajjas,roofs,facia, colum etc by necessary preparation i.e scrapping ,cutting,chiseling,derusting and cleaning exposed reinforecement, surfaces of damaged, loose RCC surfaces and applying one coat of cement slurry and filling the surfaces with cement concrete (1: 1-1/2: 3) using 12.5 mm graded crushed stone aggregate and reinforeced with welded mesh of weight exc 2Kg per sqm but n.exc 3Kg/sqm with or without facia and finished exc 5sqm each and thickness of RCC using coarse sand in patches area not each and thickness of RCC member n.exc 70mm at any height complete all as specified. Note : - Cost of formwork and welded mesh shall be deemed to be included.

M&L chequered cement concrete tiles 25cm X25cm X 25mm thick of size as approved by GE set jointed and pointed in neat cement slurry in floors with white cement & pigment laid over 20 mm screed in CM 1:6 complete all as specified and directed.

S&F in repairs Aluminium Deco Grill of Model / Design No. DG 102 complete all as specified and directed.

Repairs to existing alluminum window shutters, tighteing of joints by nuts and bolts where were required including renewal of worn out hings, handles, beading etc all as specified by Engineer - in- Charge

S&F Powder coated aluminium frame for doors, windows, ventilators or sliding window shutters with one or more rebates including joining cleat for fixing etc. complete all as specified and directed.

S&F Framed work such as grills,gratings, etc.. with ends of barsshouldered and/or riveted,or forged into spikes; framed guard bars; barred iron doors;ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165, complete all as specified and directed.

S&F 5 mm thick glass, pin head type and glazing with& Other in squares in exc 0.5 sq.m in each pane complete all as specified and directed.

Dismantling of wall and ceiling boards (fiber, pulp, insulation, etc) or insulation boards /slabs/blankets, any thickness including cover fillets complete all as specified and directed.

S&F Solid PVC Wall Lining consisting of 5mm thick / 8 to 10 mm hollow colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing, complete all as specified and directed.

5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame as per specification and drawing, complete all as specified and directed.

S & F in repair PVC bath cabinet with Mirror box type with shutter Size 350 X 450mm (Minimum) complete all as specified and directed.

S & F Anodised aluminium sanp grid frame work of size 605 x 605 mm for flase ceiling securing with 4 mm dia GI wire of 1.20 mtr centre to centre tying to roof members or bolting with self taping screws including all necessary arrengements complete all as specified and directed.

M & L 600x600x4mm thick HPSC (High Pressure Steam Cured) Oceanic pre-primed self embossed textured designer board water, termite and fire resistant as in ceiling or wall penalling fixed with screws as per manufactur's instructions complete all as specified and directed.

S&F 16 mm thick prelaminated particle board exterior grade,prelaminated side with decorative choice lamination& side balancing white lamination fixed with screws to timber frame work including external fixing of teak wood lipping 6 mm thick with nails and french polishing to teak wood lipping complete all as specified and directed.

S & F Butt hinges, 100 mm long medium weight, cold rolled mild steel, ISI marked complete all as specified and directed.

S&F aluminium handles extruded type of size 125mm, complete all as specified and directed.

S & F 150 mm long, aluminium anodised, barrel tower bolts, of extruded section ISI marked complete all as specified and directed.

Supply and fixing in repair 300mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed, complete all as specified and directed.

S&F stainless steel wire cloth 0.56 mm nominal dia of wire and average width 1.40 mm and fixed with stainless steel wire staples complete all as specified and directed.

S&F as in repair stainless steel wire cloth 0.56 mm nominal dia of wire and average width 1.40 mm and fixed with stainless steel wire staples complete all as specified and directed.

S&F in repair of continuous plano hinges mild steel bright finish or electro galvanised for 30mm thickness, complete all as specified and directed.

S&F as in repair 300 mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed complete all as specified and dirceted.

Material and labour for Painting to new wood or wood based surfaces of any description not otherwise described over 10 cm in width or girth including preparation of surfaces, priming with pink primer (one coat) finished with two coats of synthetic enamel paint complete all as specified and directed.

S&F in repair 25mm dia PVC coated decorative mild steel drapery/ curtain rod cut to required size and fixed to brackets, complete all as specified and directed.

Supply and fixing in repair 25mm dia PVC coated decorative mild steel drapery/ curtain bracket matching to item no 84.00 above all as specified and as directed

S&F 3mm plain sheet glass ordinary quality and glazing with oil putty or fixed with fillets 2nd class hard wood of sectional area not exc 3 Sqcm and glass not exc 0.5 sqm each pane (Beads shall be measured and paid separately) complete all as specified and directed.

S&F in repair PVC (SWR) pipes single socketed in any length with rubber rings joints laid in trenches or in floors of 110mm bore inculding cutting out wall /concrete and finishing of surface to match existing surface, complete all as specified and directed.

S&F in repair PVC (SWR) pipe bend door of 110mm bore with access door inculding cutting out wall /concrete and finishing of surface to match existing surface, complete all as specified and directed.

S&F in repair PVC(SWR) P trap 125/110 mm bore including cutting out wall /concrete and finishing of surface to match existing surface, complete all as specified and directed.

M&L Cleaning and removing, Exc 250 Ltrs but not exc 500 Ltrs all scale and dirt, etc, from tanks and from mouths of circulating pipes, etc. of following capacity, complete all as specified and directed.

M&L Cleaning and removing, Exc 500 Ltrs but not exc 1000 Ltrs all scale and dirt, etc, from tanks and from mouths of circulating pipes, etc. of following capacity, complete all as specified and directed.

Dismantling of Asbestos cement (corrugated, semicorrugated, etc) sheets in roof coverings, complete all as specified and directed.

S & F Pre-painted galvalum aluminium zinc coating steel based corrugated steel sheet 0.50mm thick (total coated thickness) of any colour having tensile strength of 550 Mpa minimum, yeild strength, it shall be coated with hot dip alloy of 55% aluminimum, 43.5% zinc,1.5% Silicon and finished with resin coat on both surface @ 150 gm/ sqm of coating as specified and shall be fixed with hot dip galvanised, self drilling and self tapping screws neoprened and EDPM washers as in roof covering all as directed at site all as specified and dircted.

Material and labour in Mild steel 0.63 mm thick plain black sheet in wall cladding, steel gates and similar work cut to size holes punched including round haded screws clout nails or rivets and fixed to wood or steel framing with plain 40mm lap joint with riveted or welded seams including bending or turning up mitered angles etc as requires, complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for angle iron pickets or fencing post or any description etc, all as specified and directed.

S & F Joist, channel, angle or tee , square or rectangular, tubler sections, fixed indipendently or as purlin , rafter, or post including cutting to dead length where required, notching, drilling, fitting, riveting and/or welding or connecting with bolts and nuts , providing and fitting angle cleats, fish plates, gusset plates etc, complete all as specified and directed.(Fe-410-W(Gde-E-250) quality A), complete all as specified and directed.

M&L, two coats of synthetic enamelled paint over a coat of red oxide primer including preparation of new steel / iron surfaces exceeding 10cm width or girth, complete all as specified and directed.

M&L for Machine cut kota stone slab as in kitchen plateform, open terrace , landings and treads of staircase of 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete over screed bed 15mm thick in CM (1:4), complete all as specified and directed.

S&F in repairs wall mixer 3 in 1 system with provision for both hand shower and overhead shower complete with 115 mm long bend pipe connecting legs and wall flange, complete all as specified and directed.

S&F in repair PVC(SWR) floor and P trap 125/110 mm bore including cutting out wall /concrete and finishing of surface to match existing surface, complete all as specified and directed.

S&F in repairs center Hole Basin Mixer WHB mixer system with capstan head, CP, screwed down high pressure with or without lettered ‘Hot’ or ‘Cold’ with long screwed shanks and fly nut, screwed for iron pipe 15 mm bore, supplied and fixed in repairs, complete all as specified and directed.

S&F in repairs Sink mixer system with capstan head, CP, screwed down high pressure with or without lettered ‘Hot’ or ‘Cold’ with long screwed shanks and fly nut, screwed for iron pipe 15 mm bore, supplied and fixed in repairs, complete all as specified and directed.

S&F in repairs Bib tap straight line model with wall flange complete all as specified and directed.

S&F in repair Angle cock, cast copper alloy, screwed down, high pressure, with handle screwed both ends for iron pipe or for unions, for bore dia of pipe 15 mm, complete all as specified and directed.

S&F in repairs 2 way bib cock with wall flange complete all as specified and directed.

Goyal Construction

M/S Parikshit Sharma

M/S Ashish Construction

Jamna Constructions

yash enterprises