Loading…
Loading…
| # | Company | Status |
|---|---|---|
| 1 | Admitted-Finance | Admitted-Finance |
| 2 | Admitted-Finance | Admitted-Finance |
Tender Value
₹31.7 L
EMD Value
₹32,000
Closing Date
5 Jan 2023, 3:00 pmClosed
Block Development Officer, BP
Panchayat Union, Coonoor
Construction of Additional two class room school building at Panchayat Union Primary School at J.Kolacombai H/O Jegathala town panchayat
2022_RDTN_277327_1
A5/2564/2022 dt.20.12.2022 CNRP01
Open Tender
Civil Works - Buildings
Item Rate
120 days
J.Kolacombai
Please refer Tender documents.
3 documents required · 3 mandatory
₹0
₹32,000
Yes
21 Jan 2023
31 Dec 2022
5 Jan 2023
31 Dec 2022
5 Jan 2023
31 Dec 2022
Amount
Construction of two Class room building at Panchayat Union Primary School,J.Kolacombai, Jagathala Panchayat Coonoor Block in The Nilgiris
Earth work excavation and depositing on bank within initial lead and lift in classass of soil etc., complete as per (SS 20B) for foundation
Supplying and filling in foundations and basement with filling M- sand in layers not exceeding 15 cm.thick,well watered,rammed and consolidated etc.complete complying with standard specification
Cement concrete 1:4:8 mix (One cement four sand and eight hard broken stone) using 40mm gauge hard broken granite stone jelly for foundation including watering wherever necessary and laid in layers not more than 15cm thick compacting etc. complete complyin
Refilling the approved good quality earth in plinths, area development etc.wherever specified in layers is not xceeding 200 mm thick, with available earth at site
Supplying and filling of good earthfiling locally available earth ransportedfrom the outside including consolidation, leveling specified in layers of not exceeding 200 mm thick., etc. complete in plinths, area development etc.wherever specified in layers is not xceeding 200 mm thick, with available earth at site
Supply and errecting centering with necessary supports including all labour charges etc., complete complying with standard specification.(Footing,Plinth Beam)
Supply and errecting centering with necessary supports including all labour charges etc., complete complying with standard specification.(Roofslab,Beam,Lintel beam)
Supply and errecting centering with necessary supports including all labour charges etc., complete complying with standard specification.(Coloumn,Sunshade)
Providing and laying in position, M-20 Grade in accordance with IS:456-2000, using 20mm and down grade hard broken granite stone jelly for all RCC Items of works with minimum cement content of 350kg/m3 and maximum water cement ratio of 0.50, including admixture (Plasticiser / super plasticiser) in recommended proportions as per IS:9130 to accelerate, rated setting of concrete(Foundation and Basement)
Providing and laying in position, M-20 Grade in accordance with IS:456-2000, using 20mm and down grade hard broken granite stone jelly for all RCC Items of works with minimum cement content of 350kg/m3 and maximum water cement ratio of 0.50, including admixture (Plasticiser / super plasticiser) in recommended proportions as per IS:9130 to accelerate, rated setting of concrete(Ground Level)
Supply and fabrication of steel including all labour charges etc complete complaying with standard specification
Brick Work in cement mortar 1:5 mix using country bricks of size (8 ¾ x 4 3/8 x 2 3/4) including cost & conveyance of all materials to site(Foundation, Basement)
Brick Work in cement mortar 1:5 mix using country bricks of size (8 ¾ x 4 3/8 x 2 3/4) including cost & conveyance of all materials to site(Ground Floor)
Brick Paration wall of 11.50 cm thickness in cement mortar 1:3 mix using country bricks of size (8 ¾ x 4 3/8 x 2 3/4) including cost & conveyance of all materials to site(Ground Floor)
Brick Paration wall of 11.50 cm thickness in cement mortar 1:3 mix using country bricks of size (8 ¾ x 4 3/8 x 2 3/4) including cost & conveyance of all materials to site(Terrace Floor)
Plastering with cement mortar 1:3 mix to 10 mm thick including cost and conveyance of all materials to site and all labour charges etc complete
Plastering with cement mortar 1:5 12mm thick including cost & conveyance of all materials to work site including cement which will be supplied by the department from the departmental section store and the cost for the same will be recovered
Plastering with cement mortar 1:5 20mm thick including cost & conveyance of all materials to work site including cement which will be supplied by the department from the departmental section store and the cost for the same will be recovered
Paving the Floor with scratch proof ceromic tiles of size 305x305x6mm including cost and conveyance of all materials to site and all labour charges etc complete
Providing granolithic floor finish of the following thickness with plain cement concrete 1:2:4 (One Cement, Two sand and Four aggregate) using 10 to 12mm gauge hard broken stone jelly including laying, finishing etc complete
Supplying and fixing in position steel balustrades using 20mm square rods spaced at 150mm centre to centre so that the two balustrades in each step shall be placed centrally and the top of balustrades connected including etc complete
Supplying and fixing 40mm dia GI pipe for staircase hand rail including labour charges for cutting, welding and fixing with MS flats (excluding cost of flat), etc., as directed by the departmental officers
Fabricating, Supplying and fixng in position of steel sheeted windows ( Three Leaves) with the following specifications. Outer frames of windows made of 'Z' section F7D of size 33 x 25 x 3mm at 1.419 kg/ m and mullion 'J' section (F4B) of size 46x25x3mm at 2.28kg/m and shutter section of made of F7D of 33x25x3mm at 1.419 kg/m as specified in
Manufacturing, supplying and fixing of Steel doors with following specification.MS angle of size 40x40x6mm at 3.5 kg/m used for outer frame and MS Angle of size 35x35x5mm at 2.6 Kg/m for the shutter frame. Stiffeners with 32x6mm at 1.5 Kg/m MS Flat is provided as the lock rail of the door and welded intact on both ends to the shutter frame.18 G CR Sheets of best quality is laid as panel in the shutter frames. 18x5mm at 0.70 kg/m MS flat is welded over the 32x6mm at 1.50kg/m MS Flat on the rear side of the door, sandwiching the CR Sheet for rigidity. Additional stiffeners with 18x5mm at 0.7 Kg/m MS flats are provided diagonally on the rear side of the shutter. 300mm length of hinges 2Nos, for shutter is provided.6 Nos. of 250mm length hold fasts 200mm length specified at the ends are welded to the outer frame of the door.Tower bolt 2 Nos. at the top provided.
Supplying and Painting new plastered surface with two coats of distempering one coat of distemper primer including etc complete
Providing and applying Emulsion paint finish of approved make & shade in two coats over a coat of approved primer and 2 coats of patty to give an even shade as per manufacturer's instruction to the internal plastered surfaces including preparation of surfaces, scaffolding etc. all complete as per drawings and specification for all heights.
Supplying and painting the walls with one coat of wall primer and two coats of Exterior emulsion (apex or equivalent) as instructed by the departmental officers including preparation of surface curing, etc.,complete in all floors complying with standard specifications (The colour and shade of the cement paint shall be got approved by the Executive Engineer before use of work).
Weathering Course Concrete using best quality broken brick jellyof 20 mm uniform guage in pure slaked lime ( NO Sand to be used ( over the RCC roof slab in the proportion of brick jelly to lime being 32 : 121/2 by volume laid over in single layer and consolidated to the required slope and finished thickness and beating the concrete with wooden beaters of approved pattern, keeping the surface constantly wet by sprinkling lime, jaggery water etc. complete complying with standard specifications and as directed.
Finishing the top of roof with one course of machine pressed tiles of size 230mm x 230mm x 20mm of approved quality set in Cement Mortar 1:3 (One Cement and Three Sand) 12mm thick mixed with water proofing compound conforming to ISS at 2% by weight of cement used and the joints pointed neatly to full depth of tiles with the same cement mortar mixed with red oxide and water proofing compound including curing etc., complete complying with standard specification and as directed by the departmental officers.
Painting two coats over new iron works such as Steel Doors,Windows,Windowbars using ready mixed enamel paintncluding cost and conveyance of paint and all labour charges etc complete
Supplying and fixing cuddapah slab for cupboard shelf
Providing Cup-board Shutter with frame using termite / water proof plywood of 19mm thick over which laminated sheet of 0.8mm thick fixed inside the shutter and 1mm thick fixed in the outside of the shutter using fevicol along with necessary furniture fittings, such as, hydralic hinges, tower bolt, handles, multi purpose locks etc., as directed by the Departmental Officers. The design pattern, water proof plywood, laminate sheet and other materials should be got approved from the Executive Engineer befoe use on wor
Supply and fixing PVC Rainwater downfall pipes of following dia meter etc complete
Wiring with 2 x 1.5 sqmm (22/0.3) PVC insulated unsheathed Sc Cu.Conductor of 1100V grade in suitable PVCrigid pipe on wall and ceiling with PVC accessories with TW switch box with 5A F.T. switch inflush with wall,covered with hylem sheet of 3mm thick with painting of suitable colour for open PVC light point(SD 25)
Supply and fixing of 4'-18W LED tube with fitting inclusive of all charges
Wiring with 2x 1.5sqmm (22 / 0.3 ) PVC insulated single core unsheathed copper conductor cable of 1100V gradein suitable heavy gauge MS conduit pipe on wall and ceiling with MS accessories with 150mmx 100mm x 75mm MSswitch box for 5A 3 pin non interlocking flush type CS plug wfth painting of suitable colour with continuous earthwire connection of 14 SWG TC wire for open plug point.(SD 38)
Supply and run of 2 of 1.50 Sq.mm polythene insulated PVC sheathed heavy duty SC Copper conductor of 1100 V grade on 7/20 GI bearer wire for service connection mains (SD No.64)
Provision for BaLa painting
Provision for Magnetic Green fibre Board
Provision for Display Notice board
Provision for Soakpit
Provision for Windows Acrylic Sheet 6mm thick At Bottom portion of Steel window of size300mmx 1200mm( 6 Nos)
Provision for Rainwater Harvesting Structure
Provision for Quality control
Provision for Tactile /Braille Sign Board
GST Amount for providing Service to Government Contract Works for the above Construction Works. { GST Amount is the Total GST Amount for total overall quoted amount above this row in column "BB" for all works in this package}
R K SURESH
stage.html
html • 0.03 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .