repair and renovation of Toiles washroom of Administrative Block in Fruit and Vegetable Market Bishnah 2nd Time

Amount

Providing and laying ceramic glazed floor tiles 300x300 mm (thickness to be specified by the manufacturers) of Ist quality conforming to IS: 15622 of approved make, laid on 20 mm thick bed of cement mortar 1: 4 ( 1 cemnet : 4 coarse sand) including pointing the joints with white cement and matching pigment etc. complete. In all colour except white , Ivory, Grey, Fume Red Brown. (Including all carriages and leads).

Regrading terracing of mud phaska covered with tiles or bricks, in cement by dismantling tiles or bricks, removing mud plaster, preparing the surface of mud phaska to proper slope, relaying mud plaster gobri leaping and tiles or bricks, grouted in cement mortar 1:3 (1 cement: 3 fine sand),including replacing unserviceable tiles or bricks with new ones and disposal of unserviceable material to the dumping ground (the cost of the new tiles or brick excluded) within 50 meters lead.(Including all carriages and leads).

Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells , cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed:All kinds of soil:(Including all carriages and leads).

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centering and shuttering. All work upto plinth level with: 1:4:8( 1 cement : 4 coarse sand: 8 graded stone aggregate 40 mm nominal size) (Including all carriages and leads).

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centering and shuttering. All work upto plinth level with:1:3:6 ( 1 cement : 3 coarse sand: 6 graded stone aggregate 20 mm nominal size) (Including all carriages and leads).

Brick work with common burnt clay ( non-modular) bricks of class designation 7.5 in foundation and plinth including curing in: Cement mortar 1:4 ( 1 cement : 4 coarse sand) (Including all carriages and leads).

Providing and fixing gang saw cut, mirror polished,premoulded and prepolished, machine cut for kitchen platform, vanity counters, window sills, facias and similar locations ,of required size , approved shade, colour and texure laid over 20 mm thick base cement mortar 1:4 ( 1 cement : 4 coarse sand), joints treated with white cement , mixed with matching pigment, epoxy touch ups, including rubbing , curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. Granite of any colour shade Area of slab over 0.5 sqm) (Including all carriages and leads).

Egagement of manual labour for dismantling old floor tiles with mortar and stacking of mulba as directed by Engineer-in-charge.

Providing and fixing white vitreous china pedestal type water closet (European type W.C pan) with seat and lid, 10 litre low level white P.V.C flushing cistern including flush pipe with manually controlled device (handle lever) conforming to IS: 7231 , with all fittings and fixtures, complete including cutting and making good the walls and floors wherever required. W.C pan with ISI marked white soild plastic seat and lid.

Providing and fixing wash basin with C.I. brackets, 15mm C.P brass pillar taps , 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required:White viterous china flat back wash basin size 450x300 mm with single 15mm CP brass pillar tap.

Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings.

Providig and fixing 15 mm nominal bore of standard back type C.P. brass close hole basin mixer piller tap of approved quality and make, weighing not less than 1.970 kg.

Providing and fixing 15 mm nominal bore C.P. brass angle valve for basin mixer and geyser points of approved make conforming to IS : 8931

Providing and fixing 15 mm nominal bore C.P.stop cock (concealed ) of standard design and of approved make conforming to IS: 8931.

Providing and fixing PTMT grating of approved quality and colour. Circular type 100 mm nominal dia.

Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete: 40 mm dia

Providing and fixing uplasticized PVC connection pipe with brass unions . 45cm length ( 15 mm nominal bore)

Supply of common burnt clay F.P.S. bricks tiles of class designation 10.

PAWAN KUMAR

M/s Anil Gupta