PROVN OF TOILET/ BATHROOM/ URINAL FOR TRG A AND TRAINEE ACCN AND TREATED WATER PIPE LINE FOR GARDENING PURPOSE AT MCTE UNDER GE (MCTE) MHOW

Amount

Surface dressing n. exc 30 cm deep in soft/ loose soil, complete all as specified and directed.

Excavation in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, laying of cable/ pipes, foundation of poles/stay etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in any type of soil, complete all as specified and directed.

Excavation over areas, n exc 1.5m deep and getting out in any type of soil, complete all as specified and directed

Returning, filling in including spreading, levelling, watering and well ramming in layers n.exc 25 cm, in any type of soil, complete all as specified and directed.

Removing excavated soil to a distance n exc 50m and depositing where directed at a level n exc 1.50m above the starting point, complete all as specified and directed.

M&L for Moorum/ red bajri filling in floors or pavings, laid in layers n exc. 15 cm thick, spread, levelled and rammed including watering as required complete all as specified and directed.

M&L for Anti-termite Treating bottom and sides of excavation at the rate of 5 litres of emulsion per square metre of surface area, complete all as specified and directed.

M&L for Anti-termite Treating the backfills in contact with foundation at the rate of 7.5 litres of emulsion per square metre of vertical surface (area of the structure in contact with backfill to be measured), complete all as specified and directed.

M&L for Anti-termite Treating the top surface of filled earth at the rate of 5 lires of emulsion per square metre of surface, complete all as specified and directed.

M&L for Anti-termiteTreating the soil under plinth protection at the rate of 5 litres of emulsion per square of surface area, complete all as specified and directed.

M&L for Hardcore of gauge n exc. 63mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and directed.

M&L for cement concrete 1:4:8, type D-2 (using 40mm graded stone aggregate) as in foundation filling and mass concrete and sub base of floor complete all as specified and directed.

M&L for Cement concrete 1:3:6, type C-2 using 40mm graded stone aggregate in filling sub base, base, complete all as specified and directed

M&L for RCC (Design mix) Type B1, 1:2:4 (20mm graded aggregate) as in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete, complete all as specified and directed.

M&L for RCC (Design mix) Type B1,1:2:4 (20mm graded aggregate) as in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs, septic tank, soak pit and in shelves and the like, complete all as specified and directed.

M&L for RCC (Design mix) Type B1, 1:2:4 (20mm graded aggregate) as in Roof/ plinth Beams, cantilevers, bressummers, lintels over 1.5m span, complete all as specified and directed.

M&L for RCC (Design mix) Type B1, 1:2:4 (20mm graded aggregate) as in chajjas, complete all as specified and directed.

M&L for RCC (Design mix) Type B1, 1:2:4 (20mm graded aggregate) as in Columns, pillars, piers, posts and struts, complete all as specified and directed.

M&L for Mild steel TMT bars 8mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, footing, roof beam, plinth beam, slab, chajjas and similar work hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips, complete all as specified and directed.

All as per Srl item No.19 above but 5mm dia and over up to and incl 10mm dia as in stirrups, complete all as specified and directed.

M&L for Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter etc, complete all as specified and directed.

M&L for Formwork to sides of pillars, posts, struts, piers, columns and stanchions etc, complete all as specified and directed.

M&L for Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping), complete all as specified and directed.

M&L for Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, complete all as specified and directed.

M&L for Formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/ PCC bands in walls, horizontal or sloping and similar work exc 10cm but n exc 20cm wide, complete all as specified and directed.

M&L for Brickwork with modular fly ash bricks, straight or curved on plan exc 6m mean radius built in CM(1:4), complete all as specified and directed.

M&L for 15mm thick rendering in CM 1:6 on brick work or concrete surfaces, surfaces finished even and smooth without using extra cement, complete all as specified and directed.

M&L for 15mm thick rendering in CM 1:4 on brick work or concrete surfaces, surfaces finished even and smooth without using extra cement complete all as specified and directed.

M&L for glazed ceramic coloured tiles 300 x 600mm size 6 to 7mm thick in wall, dado or skirting over & including rendering 10mm thick in CM (1:4), jointed in neat grey cement slurry and pointed in white or colour cement to match the tiles, complete all as specified and directed.

M&L for Non skid ceramic tiles coloured, 7 to 8mm thick (Square/ rectangular) area of each tile exceeding 0.42 Sqm over & including 15mm thick screed bed in CM (1:6) in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the tiles, complete all as specified and directed.

M&L for Rendering 5mm thick on fair faces of concrete/ brick interior ceiling surfaces in cement mortar 1:3 as per manufacturer's instruction, finished fair and even without using extra cement, complete all as specified and directed.

S&F vitreous china,white table top basin wash hand basin, size 380 x 480 x 140 with brass coupling including MS brackets including cutting for and pinning in, including waste pipe, complete all as specified and directed.

S&F vitreous china, white, under counter basin wash hand basin, oval shape of size 190 x 550 x 430mm with brass coupling including MS brackets including cutting for and pinning in, including waste pipe, complete all as specified and directed.

S & F of Single piece Vitreous china, wash down water closet of size 365 x 655 x 765mm with UF soft close slim seat cover, hinges, fixing accessories, accessories set and cistern fittings including P-trap-180mm etc, complete all as specified and directed.

S&F Vitreous china, wash down water closet pan (pedestal pattern), white, including plastic water closet seat cover, closed pattern with flat bottom, connection to drain (or outgoing pipe) and to flushing pipe, antisiphonage pipe etc, complete all as specified and directed.

S&F vitreous china squatting pan `Orissa` pattern, size 580 x 440mm white with integral foot rests (Excluding flushing cistern and flush pipe), complete all as specified and directed.

S&F low level Flushing cistern 10 ltr capacity, PVC valveless syphonic action type, white with inlet, ball valve, float valve and handle, flush pipe, including brackets and flushing pipe, complete all as specified and directed.

S&F vitreous china urinal half stall type of size 365 x 395 x 600mm (minimum) height with including providing & fixing of plugs bedding against wall in cement mortar 1:2 pointing around urinal back in cement mortar, complete all as specified and directed.

S&F CP brass Urinal spreader for fixing with 15mm dia pipe, complete all as specified and directed.

M&L for 16 to 18mm thick Granite (of any type) work (table rubbed and polished and exposed visible edge moulding/ rounding) in steps, jambs, pillars, window cills, cooking platforms and like in 15mm thick cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite, complete all as specified and directed

S&F Brass Bottle Trap 300mm (12") Designer wall connection pipes and wall flange, complete all as specified and directed.

S&F 75mm bore PVC floor traps plain with grating and 300mm long out let including jointing with jointing material, complete all as specified and directed.

S&F PVC pipe of 40mm dia, in any length and in any position such as walls, ceiling or laid in floor or trenches etc., complete all as specified and directed.

S&F PVC bend for 40mm dia PVC pipe, complete all as specified and directed.

S&F PVC bends 75mm bore, any radius, complete all as specified and directed.

S&F PVC (SWR) pipes of 110mm dia single socketed in any length with rubber ring joints laid in trenches or in floors, complete all as specified and directed.

S&F PVC (SWR) pipes of 75mm dia single socketed in any length with rubber ring joints fixed to walls, complete all as specified and directed.

S&F fancy type chromium plated two way bib cock of 15mm bore, screwed for iron pipe or brass ferrule etc complete all as specified and directed.

S&F 15mm dia bib tap cast copper alloy (fancy type), chromium plated, with crutch or butterfly handle, screwed down for iron pipe or for brass ferrule, complete all as specified and directed.

S&F fancy type chromium plated two way angle cock of 15mm bore, screwed for iron pipe or brass ferrule etc, complete all as specified and directed.

S & F Corner Glass Shelf of Size 320 x 320mm with Silver chromium finished border Oval Range premium quality fixed to wall with screws, complete all as specified and directed.

S&F Stainless Steel Wall Mount Case with Soap Holder & Brush Holder fixed to wall with screws, complete all as specified and directed.

S&F Brass Butter Fly Jet Spray with 1.2 meter Long Flexible Tube of premium quality fittled to Vitreous china, wash down water closet pan (pedestal pattern), complete all as specified and directed.

S&F pillar taps (swan neck), fancy type cast copper alloy with capstan heads, chromium plated, screwed down, high pressure with or without lettered “hot” or “cold” with long screwed shanks and fly nut screwed for iron pipe of 15mm bore, complete all as specified and directed.

S&F stop/ angle cock, cast copper alloy high pressure, chromium plated suitable for 15mm bore steel pipe, complete all as specified and directed.

S&F health faucet with stainless steel flexible pipe of 1.00 to 1.50 metre length including holder, complete all as specified and directed.

S&F 18mm thick factory made PVC sheet one side pre-laminated sheet cabinet/ cupboard shutter. The 18mm thick sheet shutter bent at 90 degree and finish all edges at level for marking edge lipping bending for 0.5mm thick PVC sheet lipping at all four edges using bonding tape etc. as per manufactures specification, complete all as specified and directed.

S&F Brass handles 100mm size, cast type, polished bright as approved by Engr in Charge, complete all as specified and directed.

S&F self closing stainless steel hinges for cabinet/ cupboard shutters, complete all as specified and directed.

S&F PVC connections of 450mm long of suitable for 15mm dia iron pipe including PTMT nuts, complete all as specified and directed.

S&F 15mm bore, GI tubes, medium grade with all fittings and fixed to walls and ceiling or laid in floors including testing, complete all as specified and directed.

S&F rotational moulded polyethylene water storage tanks 500 Ltr capacity (cylindrical vertical with closed top) hoisted with and including 20mm dia ball brass valves, high pressure with polythene float and fly nut complete screwed for iron pipe or for brass ferrule and fixed in position all as per SSR Part I, complete all as specified and directed.

Supply & fixing of stainless steel tubular towel rail, 60 cm long, 20mm bore, fixed to wall with screws, complete all as specified and directed.

S & F in repair of stainless steel Toilet paper holder, complete all as specified and directed.

S & F Factory made single extruded WPC (Wood Polymer Composite) solid door Chowkats of size 45 x 70mm of virgin PVC polymer of K value 58-60 (Suspnsion Grade), calcium carbonate and natural fibres (wood powder/ ricehusk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screws with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strenght of 2200 N (Face) & 1100 N (Edge), minimum compressive strenght of 58 N/mm sqm, modules of elasticity 900 N/mm sqr and resistance to spread of flame of Class A category with property of being termite/ borer proof, water/ mositure prooof and fire retardant and fixed in position with MS hold fast/ lugs/ SS dash fasteners of required dia and lenght complete as per direction of Engineer-in-Charge fixed with MS hold fast/ lugs or SS dash fasteners etc, complete all as specified and directed.

S & F Factory made single extruded WPC (Wood Polymer Composite) solid DECORATIVE TYPE PANEELED DOOR SHUTTER of size 30mm thick comprising of virgin PVC polymer of K value 58-60 (Suspnsion Grade), calcium carbonate and natural fibres (wood powder/ ricehusk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screws with full body threaded star headed SS screws having minimum frame density of 650 kg/cum , screw withdrawal strenght of 1800 N (Face) & 900 N (Edge), minimum compressive strenght of 50 N/mm sqr, modules of elasticity 850 N/mm sqr and resistance to spread of flame of Class A category with property of being termite/ borer proof, water/ mositure prooof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk SS screws complete all as specified and directed. Note: Stainless steel butt hinges and necessary scews shall be measured and paid seperately.

S & F for 100mm long Stainless steel butt hinges, medium weight, complete all as specified and directed.

S&F 300mm length, Stainless steel, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy, complete all as specified and directed.

S&F for 150mm long Stainless steel barrel tower bolts of extruded section, complete all as specified and directed.

S&F for Stainless steel handles 150mm, oval type, stove enamelled black, complete all as specified and directed.

M&L for 75mm thick PCC 1:3:6 type C-2 (using 20mm graded stone aggregate) as in plinth protection Finishing surfaces of concrete topping even and fair (without using extra cement) including making joint at every 3 mtr interval and at corner and filled with mixture of bitumen and sand and finished even and fair and laid in alternate bays, complete all as specified and directed.

M&L for water proofing roof treatment to RCC roof with approved modified membrane of weighing not less than 3 kg/Sqm. The height of the roof may upto 9 m comprising with following items complete all as specified and directed:- (i) The surface of roof, parapet and gutters drain mouths etc over which water proofing treatment is to be applied shall be cleaned of all foreign matter such as fungus, mass dust etc by wire brushing and dusting. (ii) Oil based Bitumen primer conforming to IS-3384-1986 @ 0.3 kg per sqm to be applied on prepared surface till the surface is properly impregnated. (iii) Applying one coat of hot blown bitumen of 85/25 grade @ 1.20 kg/Sqm. (iv) Laying of water proofing APP modified polymeric water proofing membrane of weight not less than 3mm thick composed of woven polyster center core, which is sandwitched between high quality polymeric bitumen mix having softening, high heat resistance and cold flexible protected on either side with a thin thermo fusible HMHDPE film with side and laps as per manufacture instruction etc. (v) Applying one coat of hot blown bitumen of 85/25 grade @ 1.20 kg/Sqm.

M&L for preparation of newly plastered surfaces of wall and applying two coat of Ist quality exterior weatherproof water base emulsion paint over a coat of primer of same make on wall as specified and directedpillasters, cornices etc (upto G+3 storied building) scrapping down, brooming down or steel wire brushing, and washing with water after completion of precoat treatment applying two coats of Anti fungal Weather coat paint (Exterior emulsion) white or tinted over a coat of primer (X2), complete all as specified and directed. Note:- (a) Each stage i.e preparation of surfaces, application of primer, application of first coat, application of second coat will be got passed from Engr-in-Charge/ GE. (b) Written Warranty for four years or as per manufacturer's instructions, whichever is more is required to be furnished by contractor for this item.

M&L for preparation of new plastered surfaces of walls and applying two coats of oil bound distemper including two coat (2mm thick) of putty over a coat of alkali resistance primer, complete all as specified and directed.

M&L for preparation of new plastered surfaces of walls and applying three coats of white wash on ceiling surface, complete all as specified and directed.

M&L for Anodised aluminium ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc., complete all as specified and directed.

M&L for Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 80mm thickness M-40 Grade with grey cement and pigment laid on 50mm thick stone dust cushioning laid dry to the profile, complete all as specified and directed.

M&L for concrete bed PCC 1:3:6 type C-2 using 40mm graded stone aggregate to drain pipe 200/225mm bore including packing under and haunching against the sides of pipes after they are laid and tested, complete all as specified and directed. Note:- Thickness of bed below the barrel of pipe 10cm for pipe 100mm and 150mm dia, and 15cm for 200mm dia & over

M&L for 200mm ID/220mm OD DWCPE SN-8 pipes premium quality single soceted in length with joints laid in trenches or in floors including all necessary fitting, joints etc, complete all as specified and directed.

M&L for Precast RCC (1:2:4), type B1 (using 20mm graded stone aggregate) as in manholes cover slab (including necessary formwork) with two handles of mild steel round bar 10/12mm dia, made to shape, set in CM (1:4), including demolition of existing cover slab complete all as specified and directed. Note:- Reinforcement shall be measured and paid for seperately.

M&L for 25mm thick Cement concrete 1:2:4, type B-0, using 12.5mm graded stone aggregate, finished surface rough to receive tiliing, complete all as specified and directed.

S&F for Pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws, complete all as specified and directed.

S&F mild steel rolled sections as in posts, main and cross beam, hip and jack rafters, purlins, where connected to common rafters (beam, tee, angle, channel pipes, tubes, plates and flat sections etc) including distances pieces, cleats etc cutting half brick thick wall and fixing with cement mortar, grade FE-410, (gde-E-250) quality, complete all as specified and directed.

M & L for Point wiring with 1.5 Sqmm (nominal cross sectional area), single core, PVC insulated with multistranded PVC unsheathed FRLSH copper conductor cable in and including rigid non- metallic PVC concealed conduit of suitable size medium grade ISI marked complete, including one continuity earth wire of PVC insulated, unsheathed 1.5 Sqmm (nominal cross sectional area) FRLSH copper conductor connected to all fittings, common earth and connected to earth dolly including modular flush box with earth dolly duly, covered with modular white cover plate with inner frame suitable for modular switches and blank plates of suitable size all fittings and accessories and making good disturbed surface of walls and floors etc., complete all as specified and directed for the following:-

(a) One light/ fan/ bell controlled by one, one way switch 5/6 Amps

(b) One 3 pin, 5/6 Amps socket outlet point on independent board controlled by one, one way 5/6 Amps switch

(c) One 3 pin, 5/6 Amps socket outlet point on same board controlled by one, one way 5/6 Amps switch

M & L for Point wiring with 2.5 Sqmm (nominal cross sectional area), single core, PVC insulated with multistranded PVC unsheathed FRLSH copper conductor cable in and including rigid non- metallic PVC concealed conduit of suitable size medium grade ISI marked complete including one continuity earth wire of PVC insulated, unsheathed 2.5 Sqmm (nominal cross sectional area) FRLSH copper conductor connected to all fittings, common earth and connected to earth dolly for one three pin 15/16 Amps socket out-let point on an independent board including modular flush box with earth dolly duly, covered with modular white cover plate with inner frame suitable for modular switches and blank plates of suitable size and making good disturbed surface of walls and floors etc. complete all as specified and directed Note:- Make of GI flush box should be same with switch/socket

S&F for Ceiling rose, surface bakelite with three terminals ISI marked, AC, 50 HZ, 230V, complete all as specified and directed.

S&F modular switch 1 way 6 A, 1 module, complete all as specified and directed.

S&F modular socket 6 Amps 2/3 pin combined 2 module, complete all as specified and directed.

S&F switch modular type 16 A, 1 module, complete all as specified and directed.

S&F socket modular type multipurposes 6/16 A, 2 module, complete all as specified and directed.

S&F lamp holder insulated body with back plate for batten fittings, complete all as directed.

Supply and fixing Inverter LED batten 20 watt with squre profile and polycarbonate channel. Lithium lon battery with charging time 8 hourse -10 hourse and back up time upto 3 hours. with extruded environmental friendly, energy efficient with three core flexible copper conductor cable of suitable size from ceiling rose complete with all connected accessories complete all as specified and directed.

S & F for Energy saving new generation environmental friendly long life versatile LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete including necessary mounting arrangements and provision of 2.5 Sqmm three core copper conductor cable multi stranded from ceiling rose to light fitting and necessary dia GI pipe medium grade bracket 1.5 mtr long bend to required shape with clamps, nut, bolts complete all as specified and directed by Engineer- in-charge.

S&F LED inverter bulb of 9 watt, of base B-22, lm 700, col tamp 6500 K suitable for fixing in lamp holder, complete all as specified and directed.

Supply and fixing 10W LED 6500K lights fitting Decorative ultra slim square profile LED lighting fixture with extruded polycarbonate, environmental friendly, energy efficient with three core flexible copper conductor cable of suitable size from ceiling rose complete with all connected accessories, complete all as specified and directed.

S&F LED light fitting 1 x 9W/ 1 x 10W bulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size, complete all as specified and directed.

S & F LED recessed/ surface down light 15 watt with smart sensor inbuilt microwave motion technology for providing an energy efficent solution with auto dimming option from 100% to 25 % of the rated wattage complete all as specified and directed by Engr-in-Charge.

S&F of exhaust fan, steel body AC single phase 230 volt of size 300mm sweep complete with blade, frame and louvers all as specified and directed incl making/ alteration of hole wherever necessary making good disturbed surface, painting to match with existing surfaces, complete all as specified and directed.

S&F plastic body exhaust fan, AC single phase 230/ 240 V of size 250mm sweep with louver, white in colour including cutting of wall and duly connection with copper wire from ceiling rose etc complete all as specified and directed incl making/ alteration of hole wherever necessary making good disturbed surface, painting to match with existing surfaces, complete all as specified and directed.

S&F double door SPN DBs 6/8 ways of powder coated DB's suitable for MCB's fitted with bus bar, Neutral link, Earth bar and Din rail, complete all as specified and directed.

S&F of MCB SPN, current carrying capacity 32 Amp rating, 240V, 10KA, 'C' curve, complete with connection testing and commissioning, complete all as specified and directed.

S&F of MCB SP, 240V, 10 KA 'B' curve of current carrying capacity 5 to 32 Amp, in the MCB DB complete with connection testing and commissioning, complete all as specified and directed.

M&L for Sub main wiring with two runs of single core FRPVC insulated unsheathed cable 1100 volts grade, 4 Sqmm size with multistranded copper conductor, drawn in and including concealed non metallic rigid PVC conduit of not less than 25mm dia including one run of PVC insulated unsheathed 4 Sqmm cable with multistranded copper conductor green PVC insulated as continuous earth conductor cable connected to earth dolly in concealed wiring system by cutting of wall and making good disturbed surface of wall complete all as specified and directed. Note:- Two runs of 4 Sqmm cable, one run of 4 Sqmm cable and one run of PVC conduit will be measured as one unit.

Sppply & Laying XLPE insulated, armoured, electric cable of size 10 Sqmm 2 core with aluminium conductor, 1100 volts grade, laid in trenches, fixed on poles/ walls or passing through pipes including provision of necessary lugs and glands & making necessary connection, complete all as specified and directed.

Supply, laying and jointing of GI pipe 'light grade' 40mm bore in trenches/ under floors or roads/ along with poles/ on wall including clamps of suitable size, for protection of cables including fittings, complete all as specified and directed.

M&L for sand cushioning with clean and dry sand (un washed) in trenches including spreading and levelling for UG cable, complete all as specified and directed. Note:- Punned thickness will be measured for payment purpose.

M&L for brick sub class ‘B’ (modular size), laid flat in trenches alongwith cable, width equal to length of brick for protection of cable, complete all as specified and directed.

Supply and laying of Galvanised Iron water pipe, medium grade, of size 40mm bore laid in trenches/ on wall etc complete with all GI accessories like elbow, tee, socket, bends etc, complete all as specified and directed.

Supply and laying of Galvanised Iron water pipe, medium grade, of size 25mm bore laid in trenches/on wall etc complete with all GI accessories like elbow, tee, socket, bends etc, complete all as specified and directed.

M&L for drilling and tapping CI/DI/GI water mains (in position) for branch connection of the internal dia 25/40mm and connecting tee of suitable size complete all as specified and directed.

S&F Gun-metal, globe or gate valves, with iron wheel head, screwed both end for iron pipe of size 25/40mm bore, complete all as specified and directed.

Supply and laying 3-layer PP-R (Polypropylene random copolymer) concealed pipes of outer dia 50mm SDR 7.4 (PN 16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings fixed complete to wall, celing or in floor etc, complete all as specified and directed.

Supply and laying 3-layer PP-R (Polypropylene random copolymer) concealed pipes of outer dia 32mm SDR 7.4 (PN 16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings fixed complete to wall, celing or in floor etc, complete all as specified and directed.

Supply and laying 3-layer PP-R (Polypropylene random copolymer) concealed pipes of outer dia 25mm SDR 7.4 (PN 16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings fixed complete to wall, celing or in floor etc, complete all as specified and directed.

Supply and install water sprinkler system for garden, automatic 360 degree operation, complete all as specified and directed.

Supply and fixing PP-R gate valve (brass insert) of 50mm bore, complete all as specified and directed.

Supply and fixing PP-R gate valve (brass insert) of 32mm bore, complete all as specified and directed.

Supply and fixing PP-R gate valve (brass insert) of 25m bore, complete all as specified and directed.

Supply and fixing PP-R ball valve (brass insert) of 25mm bore, complete all as specified and directed.

GIRIRAJ CONSTRUCTION AND TRADERS (BID ID -3476844)

M/S UnitedConstruction (BID ID -3484876)