WELCOME MAINT AND REPAIR OF B/R ITEMS AT COE, MES OFFR ENCLAVE AND 216 TRANSIT CAMP UNDER AGE B/R-III, AT BB CANTT, SRINAGAR

Amount

M&L for preparation of old distempered surfaces of walls by washing, rubbing down and stopping and applying one coat of oil emulsion distemper, complete all as specified and directed.

M&L for preparation of old distempered surfaces of walls by washing, rubbing down and stopping and applying two coat of oil emulsion distemper complete all as specified and directed.

M&L for preparation of old distempered surfaces of ceiling by washing, rubbing down and stopping and applying one coat of oil emulsion distemper complete all as specified and directed.

M&L for preparation of old painted wooden surfaces of any description not otherwise described over 10cm width or girth and applying one coat of synthetic enamel paint, complete all as specified and directed.

M&L for complete removal of the existing treatment on walls by scraping and washing down with water and applying one coat of primer and treating with two coats of oil emulsion distemper over 2mm thick wall care putty complete all as specified and directed.

S&F Lagging to pipes internal dia 15mm used in internal water supply or plumbing all round with, 25min thick bonded mineralwool preformed ‘SNAP ON ’pipe sections of density 144Kg/cum conforming to IS9842 including chicken mesh wire netting 25 gauge, 20mm mesh allowed & with 0.01mm aluminium foil, complete all as specified and directed.

S&F Lagging to pipes internal dia 20mm used in internal water supply or plumbing all round with, 25min thick bonded mineralwool preformed ‘SNAP ON ’pipe sections of density 144Kg/cum conforming to IS9842 including chicken mesh wire netting 25 gauge, 20mm mesh allowed & with 0.01mm aluminium foil, complete all as specified and directed.

Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., complete all as specified and directed.

S&F 110mm dia PVC (SWR) pipes including necessary fittings, single socketed in any length with rubber ring joints fixed to walls, complete all as specified and directed.

S&F 75mm dia PVC (SWR) pipes including ecessary fittings, single socketed in any length with rubber ring joints fixed to walls, complete all as specified and directed.

M&L for Second class soft-wood (Kail) wrought in scantlings including dismantling of old timber scantling, complete all as specified and directed.

M&L for 15 mm thick 1st class soft wood austrelian wooden paneling fixed with tongued and grouded as wall paneling incl two coat varnishing, polishing over a coet primer and prepration with 6 mm ply sneezing including necessary timber scantling and frame work, complete all as specified and as directed.

S&F in repair laminated flooring of size 1200 X 200 X 6 to 8 mm thick with adhesive and base as specified by manufaacturers instructions, complete all as specified and as directed.

S&F in repair 15 mm bore Brass CP Wall mixer for mixing hot & cold water screwed down for iron pipe, complete all as specified and directed.

Dismantling wall and ceiling boards (fibre, pulp, insulation,etc) or insulation boards/ slabs/bankets, any thickness, including cover plate, complete all as specified and directed.

M&L for Block boards, grade 1 quality, exterior grade, 18/19 mm thick decorative type with decorative face veneer on both face, complete all as specified and directed

M&L for 4mm thick Non asbestos fibre cement building boards fixed or laid over Anodised aluminium snap grid frame work for false ceiling all as specified size of grid 605x605mm, complete all as specified and directed.

S&F Hollow PVC Wall Lining consisting of 5mm thick Plain colour PVC sheet 5mm thick PVC sheet fillet of width 20mm 'L' & 'U' for wall paneling inclusive of fixing on to wall to make PVC Frame as per specifications and drawing, complete all as specified and directed.

Dismantling of plain or corrugated steel sheeting ,any gauge, thickness including roof covering etc complete all as specified and directed.

S&F 0.63mm thick galvanised, corrugated mild steel sheeting with two corrugation side lap, fixed with coach screws and washers, in roof, wall etc with grade of zinc coating 275, complete all as specified and directed.

S&F 0.63 mm thick plain, galvanised, mild steel sheeting, in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 275, fixed with coach screws and washers, in roof, wall etc complete all as specified.

S&F Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

S&F Pre-painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof overing/cladding to wall, fixed with self tapping screws complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.

S&F for roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (beam,tee, angle, channel or flat sections) including distance pieces,cleats etc Fe 410-w(Gde-E-250) Quality-A, complete all as specified and directed.

S&F for joist, channel, angle or tee sections, fixed independently, without connecting plates, etc (cut to ordinary lengths i.e. within 20mm of the length indicated) Fe-410 W (Gde- E-250) Quality-A complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) etc, complete all as specified and directed.

M&L for Coloured Glazed ceramic tiles of size 300x 200x 7 mm thick on vertical surface set and jointed in neat cement slurry and pointed in white or colour cement to match the shade of tile fixed over and including 10 mm thick rendering in cement mortar 1:4,complete all as specified and directed.

Demolition of cement concrete un-reinforceed in ground floor and paving not exceeding 15 cm thick below or above ground level, complete all as specified and directed.

M&L for Vitrified Ceramic tiles 9-10 mm thick (square/ rectangular) light shade, polished, area of each tiles exceeding 0.36sqm but not exceeding 0.42sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile laid over and including 15mm thick screed bed or bedding layer in CM 1:4, complete all specified and directed.

M&L for Coloured Non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile laid over and including 15mm thick screed bed or bedding layer in CM 1:4, complete all specified and directed.

M&L for vitrified ceramic tiles light shade 10mm thick (square/Rectangular) polished, area of each tile n exc 0.36 Sqm in vertical surfaces such as walls, skirting etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match, fixed over and including 10 mm thick rendering in cement mortar 1:4, complete all as specified and directed.

Demolition of stone slabs and tiles of any description or thickness in floors, aprons Laid, bedded and pointed in any mortar etc complete all as specified and directed.

M&L for 18-20mm thick Granite (of any type) machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing, laid over and including 15mm thick screed bed or beding layer in cement mortar (1:4), complete all as specified and directed.

M&L for Chequered cement concrete tiles 30cmx30cmx 22-25mm thick, with white cement and pigments set, jointed in neat cement slurry in floors laid over and including 15mm thick screed bed or beding layer in cement mortar (1:4), complete all as specified & directed.

M&L for 60mm thick Machine pressed factory made Precast cement concrete interlocking paver blocks with using grey cement and no pigment of Grade M-35 of any size & shape confirming to IS 15658-2006 laidover a layer of 50mm thick sand cushioning including watering and consolidation,complete all as specified and directed.

M&L for 75mm thick plain cement concrete (1:4:8) type D-2 (using 40 mm graded crushed stone aggregate) as in sub base of flooring/ hard standing, complete all as specified and directed.

M&L for 75mm thick Plain cement concrete (1:3:6) type C-2 (using 40 mm graded crushed stone aggregate) as in plinth protection finished even and smooth without using extra cement, complete all as specified and directed.

Taking down cement plaster incl racking out joints, hacking for key & scrubbing down with water etc., complete all as specified and directed.

M&L for 15mm thick rendering in CM 1:6 on fair faces of brick or concrete surfaces finished to even & smooth without using extra cement, complete all as specified and directed.

M&L for 15mm thick rendering in CM 1:4 on fair faces of brick or concrete surfaces finished to even & smooth without using extra cement, complete all as specified and directed.

M&L for 5mm thick rendering in CM 1:4 on ceiling surfaces finished to even and fair, complete all as specified and directed.

M&L for preparation of new plastered surface of wall and applying two coats of cement base paint, complete all as specified and directed.

M&L for preparationof new surfaceof walls and applying two coats oil bound distemper over coat of suitable primer, complete all as specified and directed.

Demolition of brick work or stone masonry built in cement mortar including all quoines arches, pillar etc but excluding ashlar facing, dressed stone work and precast concrete articles, complete all as specified and as directed.

M&L for brick work with sub class 'B' bricks, old size, straight or curved on plan exc 6.0 mtr mean radius, built in CM 1:6, complete all as specified and directed.

S&F in repair sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm, complete all as specified and as directed.

S&F in repair 15mm bore sink mixer for mixing hot or cold water, brass, CP, fancy type, with capstan head handles, screwed down high pressure, screwed for iron pipe or for brass ferrule, complete all as specified and directed.

S&F in repairs vitreous China wash down (EWC) water closet pan (pedestal pattern), white (excluding flushing cistern and flush pipe) but including plastic water closet seat cover closed pattern with flat bottom and cover with PVC hing devise, fixing bolt for pedestal pattern, complete all as specfied and directed.

S&F in repair PVC low level flushing cistern 10 liter capacity, valveless, syphonic action type with float, handle incl 32mm dia flush pipe of polyethylene of low or high density or PVC & bracket complete all as specfied and directed.

S&F in repair Vitreous china wash basin white flat back size 580x450 mm excluding taps waste chain and plug and porcelain stopper but including brackets and 15 mm bore CP centre hole mixer, complete all as specfied and directed.

S&F in repair Angle valve / Stop valve 15mm dia cast copper alloy chromium plated fancy type without shank and cup concealed type srewed for iron pipe or for union complete all as specfied and directed.

S&F in repair stainless steel plate rack of size 786 x 610 x 254mm made cut of 1.00mm thick stainless steel sheet of first quality, complete all as specified and directed.

S&F Tubes, medium grade galvanised, 15 mm bore with all fittings and fixed to walls and ceilings or laid in floors including taking up or down old steel tubing and connections and removing from site complete all as specified and directed.

S&F Tubes, medium grade galvanised, 20 mm bore with all fittings and fixed to walls and ceilings or laid in floors including taking up or down old steel tubing and connections and removing from site complete all as specified and directed.

S&F 500 litres capacity rotational moulded polyethylene water storage tank, three layers (cylindrical, vertical with closed top) hoisted and fixed in position incl all accessories, 20mm dia ball valve high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe complete including taking down old unserviceable tank, complete all as specified and as directed.

S&F 1000 litres capacity rotational moulded polyethylene water storage tank, three layers (cylindrical, vertical with closed top) hoisted and fixed in position incl all accessories, 20mm dia ball valve high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe complete including taking down old unserviceable tank, complete all as specified and as directed.

S&F in repair 25 mm dia 3-layer PP-R Polypropylene random copolymer) concealed pipes SDR 7.4 (PN16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings fixed complete to walls, ceilings or in floors etc. complete all as specified and as directed.

S&F in repair 25 mm PP-R Gate valves (brass insert) as per requirement of the site , complete all as specified and as directed.

S&F in repair 25 mm PPR unions fixed as per site requirement, complete all as specified and directed.

S&F in repair GI clamps/supports incl necessary screws for PPR pipes/steel tubing (of 20 to 32 mm dia) to replace old unserviceable/missing clamps complete all as specified and directed. Note:- Work is to be carried in 2/3 storey high bldgs.

Taking down chowkats or frames with shutters (without taking off shutters from the frames) area exceeding 1.50 sqm and not exc 4.00 sqm each and removing from site, including cutting holes for taking out existing hold fasts and making good the disturbed portion of jambs and adjoining surfaces to match with existing finish complete all as specified and as directed.

Taking down chowkats or frames with shutters (without taking off shutters from the frames) area not exceeding 1.50 Sqm each and removing from site, including cutting holes for taking out existing hold fasts and making good the disturbed portion of jambs and adjoining surfaces to match with existing finish complete all as specified and as directed.

Taking down shutters area n.exc 1 sqm each complete all as specified and directed.

Taking down shutters area exc 1 sqm and n.exc 2 sqm each complete all as specified and directed.

M&L for second class hard-wood Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified and directed.

S&F 35mm thick second class hardtwood (Sheeshaml) glazed and skeleton door shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded fitted with cut and mitred beads for securing glass, etc. sizes of members of shutters as specified in SSR Part-I, Section 8, clause 8.24 (a) supplied and fitted to chowkats complete all as specified and directed.

M&L for 35mm thick second class hardwood (Sheesham) plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated, complete all as specified and as directed.

S&F 3mm thick plain sheet glass ordinary quality and glazing with oil putty upto 9.50M height in steel shutter in square n.exc 0.50 Sqm in each pane or any steel frame including glazing clips, complete all as specified and directed.

S&F Galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staples etc complete all as specified and directed.

S&F 150 mm extruded aluminium alloy handles, fabricated type, complete all as specified and directed.

S&F 100 mm extruded aluminium alloy handles, fabricated type, complete all as specified and directed.

S&F Aluminium anodised barrel tower bolt of extruded section 200 mm long, complete all as specified and directed.

S&F Aluminium anodized, barrel tower bolt 150mm long of extruded section, complete all as specified and directed.

S&F 100mm size butt hinges, medium weight, cold rolled mild steel complete all as specified and directed.

S&F mild steel 300mm size ordinary rat tail rod pattern springs for door including rollers and roller plate complete all as specified and directed.

S&F 300mm long mild steel sliding door bolts, clip type, stove enameled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate, complete all as specified and directed.

S&F factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing, complete all as specified and directed.

S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm thick plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening complete all as specified and directed.

M&L for preparation of new wooden surface of any description not other wise described over 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of pink primer, complete all as specified and directed.

S&F in repair Harrison rails, mild steel, chromium plated with brakcet, knobs, rings @ 10cm c/c etc., complete all as specified and directed.

S&F in repair 30mm (width of flap) continuous (piano) hinges, brass, bright finish or electrogalvanised complete all as specified and directed.

S&F in repairs one piece EWC Casino with soft close with seat cover, complete all as specified and directed.

S&F in repair brass CP Wall mixer fancy type 3 in 1 for mixing hot and cold water screwed down for iron pipe including concealed GI pipe from mixer to head shower complete all as specified and directed..

Notes :- An amount of Rs. 89,875.00 on account of Credit Schedule for Schedule 'A' Part-II shall be deducted from total quoted amount of BOQ to arrive at the contract sum.

Alishan Builders (BID ID -3278480)

M/S Vivek Gupta and Co (BID ID -3277363)

rafiq trading co (BID ID -3278565)

M/S AIJAZ ENTERPRISES (BID ID -3277713)

D N ENTERPRISES (BID ID -3278552)

M/S SHIMAR STAR GLACIER (BID ID -3278210)

M/s Lal Enterprises (BID ID -3277825)