Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹96.9 LAccepted-AOC | L1 | Accepted-AOC Bid accepted being lowest tenderer | |
| 2 | L2₹1.0 Cr+₹5.3 L (5.37%)Rejected-Finance B XXIII 56 A PREM NAGAR SAINGARGH PATHANKOT 145001 PUNJAB | PATHANKOT | PATHANKOT | PUNJAB | 145001 | L2 | Rejected-Finance Other than lowest tenderer hence rejected | |
| 3 | L3₹1.0 Cr+₹5.9 L (5.96%)Rejected-Finance | L3 | Rejected-Finance Other than lowest tenderer hence rejected | |
| 4 | L4₹1.1 Cr+₹8.7 L (8.78%)Rejected-Finance 137 MODEL TOWN PATHANKOT 145001 PB | PATHANKOT | PATHANKOT | PUNJAB | 145001 | L4 | Rejected-Finance Other than lowest tenderer hence rejected | |
| 5 | L5₹1.1 Cr+₹10.4 L (10.5%)Rejected-Finance VILL BUNGDAL DADHANI P O BADHANI DISTT PATHANKOT PIN 145001 | PATHANKOT | PATHANKOT | PUNJAB | 145001 | L5 | Rejected-Finance Other than lowest tenderer hence rejected |
Tender Value
₹1.1 Cr
EMD Value
₹1.9 L
Closing Date
16 Dec 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
CWE MAMUN
HEADQUARTERS CWE MAMUN PIN-145001
ADDN/ALTN TO BLDG NO. NP-24, NP-25, NP-8 AND SERVANT QRT OF NP-3, NP-4, NP-5, NP-6, AND NP-23 UNDER GE (S) MAMUN AT MAMUN MIL STN
2022_MES_562669_1
CWE/M-40/2022-23
Open Tender
Civil Works - Others
Item Rate
365 days
GE (S) MAMUN
Class B a(i)
7 documents required · 7 mandatory
₹1,000
GE (S) MAMUN
₹1.9 L
Yes
7 Jan 2023
11 Nov 2022
19 Dec 2022
11 Nov 2022
16 Dec 2022
2 Dec 2022
Amount
Taking down cement plaster on brick walls or stone walls any descrition etc including raking out joints, hacking for key, scrubbing down with water etc all as specified and directed.
Material and labour for Rendering 10mm thick cement plaster on fair faces of brick work or concrete surfaces in cement mortar (1:6) finished even and smooth without using extra cement complete all as specified and as directed.
Material and labour for Rendering 05 mm thick cement plaster on faces of concrete surfaces in cement mortar (1:3) as in ceiling finished even and fair without using extra cement all as specified and directed.
Material and labour for Rendering 15mm thick cement plaster on fair faces of brick work or concrete surfaces in cement mortar (1:4) finished even and fair without using extra cement with WPC, complete all as specified and directed. (Note:- WPC shall be measured and paid seperately)
Material and labour for rendering or plastering work 10mm thick in CM 1:3 in fascia/sides & edges, ceiling of Chajjas, roof projections etc, including roughening old concrete surface and making the line in true shape and finishing the surface without using extra cement, complete all as specified and directed.
Material and labour for preparation of new plastered surface of wall by applying 2mm thick wall care putty and making the surface smooth and applying two coat of oil emulsion distemper over a coat of primer complete all as specified & directed.
Material and labour for preparation of new plastered surface of wall and applying three coats of white wash, complete all as specified and directed.
Material and labour for preparation of old plastered surfaces of wall by scrapping down smoke roots, moulds salts and treading oil and greasy spots with wire brush and applying one coat of white wash, complete all as specified and directed.
Material and labour for preparation of new plastered surface of wall by applying two coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces incl 1mm thick wall putty over new plastered surface to prepare the surface even and smooth complete all as specified and directed.
Material and labour for complete removal of existing treatment by manual or mechanical means and preparation of old plastered surface of wall by applying two coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces incl 1mm thick wall putty over plastered surface to prepare the surface even and smooth complete all as specified and directed.
Material and labour for preparation of new plastered surface of ceiling and applying three coats of white wash, complete all as specified and directed.
Material and labour for complete removal of existing treatment and applying 2mm thick wall care putty and making the surface smooth and applying two coat of oil emulsion distemper over a coat of primer complete all as specified & directed.
Material and labour for preparation of old plastered surfaces of ceiling by scrapping down smoke roots, moulds salts and treading oil and greasy spots with wire brush and applying one coat of white wash, complete all as specified and directed.
Material and labour for prepration of old steel surfaces of any description, not other wise described over 10 cm width or girth and applying one coats of synthetic enamel paint , white or tinted complete all as specified.
Material and labour for prepration of old wooden surfaces of any description, not other wise described over 10 cm width or girth and applying one coats of synthetic enamel paint , white or tinted complete all as specified.
Dismantling of floor, hearth or wall tiling including cement mortar bedding (but not backing ) removing serviceable tiles to store and rubbish off the premises. complete all as specified and directed.
Material and labour for roughening surface of old concrete by picking, sweeping clean and washing down with water to remove all loose dust etc.and applying brushing neat cement slurry with 3.00 kg of cement per sqm complete all as specified and as directed.
Demolition of Stone slabs & tiles of any description or thickness in floors, aprons etc laid bedded and pointed in any mortar, complete all as specified and directed.
Demolition of cement concrete (unreinforced) in ground floor and paving not exc 15cm thickness (below or above ground level) complete all as specified & directed.
Material and labour for vitrified ceramic light shade tiles10 mm thick (Square or rectangular) polished, area of each tile n. exc. 0.36 sqm in floors etc set and jointed(joint free) in neat cement slurry and pointed in coloured cement and screed bed or bedding layers of mortars 15 mm thick in CM 1:6 for laying floor finishes, complete all as specified & directed.
Material and labour for vitrified tiles10 mm thick ( Square or rectangular) polished, area of each tile exceeding 0.36 sqm in skirting/dado/risers of steps etc set and jointed (joint free) in neat cement slurry and pointed in coloured cement. incl rendering 10mm thick in CM (1:4) and finished rough, complete all as specified and as directed.
Material and labour for non skid ceramic coloured tiles 7 to 8 mm thick area of each tile exc. 0.11 sqm and n. exc. 0.18 sqm in floors etc set and jointed in neat cement slurry and pointed in coloured cement. over and incl screed bed or bedding layers of mortars 15 mm thick in CM 1:6 for laying floor finishes, complete all as specified and as directed.
Material and labour for glazed ceramic coloured in different colour combination as approved by GE of size 450x300x7mm thick on vertical surfaces such as skirting, dados and riser to steps etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and incl rendering 10mm thick in CM (1:4) on brick or concrete surface, complete all as specified and as directed.
Material and labour for Machine cut kota stone slab flooring 18-20 mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror polishing over 20 mm thick screed bed in cement and sand mortar 1:6 complete all as specified.
Material and labour for Machine cut kota stone slab as in riser of skirting/dado etc 16-18 mm thick laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror polishing over and incl 10 mm thick rendering in cement and sand mortar 1:4 complete all as specified.
Material and labour for coloured 60mm thickness, M-35 Grade, machine pressed precast rubber moulded concrete interlocking (red/yellow) paver block of any shape and size with 6-8mm white cement layer mixed with pigment and coated with epoxy coating having high glossy finish confirming to IS 15658-2006, laid dry over and including 50 mm thick screened river washed sand cushion, complete all as specified and directed.
Material and labour for 75 mm thick P.C.C 1:4:8 type D2 (using 40 mm graded aggregate) as in sub base of flooring complete all as specified and as directed.
Material and labour for PCC (1:2:4) type B-1 using 20mm graded crushed stone aggregate as in , in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, as directed complete all as specified.
Material and labour for Marble work Udaipur green 16mm to 18mm thick (table rubbed and polished)as in cooking platforms, treads, riser or landing of stair hall, window cill and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade of other than white and black incl cutting of 25 mm dia hole for gas pipe and incl rounding to edges complete all as specified and directed.
Material and labour for Cement concrete type C-1, 1:3:6 (using 20mm graded aggregate) as in plinth protection 75mm thick finished even and smooth incl making joints at every 2.5m and at corner filled with bitumen 85/25 and sand in ratio 1:2 by weight and complete all as specifed.
Taking down existing roof treatment of any description incl mud phuksha or PCC pedding if any (any no of layers) including removal to dabries in low laying area exc 1.00 KM but n exc 2.00 KM as directed by Engr in charge complete all as directed.
Material and labour for PCC 1:2:4 type B-1 (using 20 mm graded stone aggregate) laveling course on existing roof or sunken floor of toilet portion, rounded and chamfered on edges, complete all as spd and directed
Material and labour for APP modified roof treatment over existing non-accessible RCC roof slab / chajjah / canopy / parapet wall to be executed through approved applicator of the membrane manufacturer with following specification etc complete all as specified and directed :- (a) Cleaning the top surface of RCC roofing properly with water complete and apply cement slurry mixed with Liquid WPC. (b) 20 mm thick plaster in CM 1:3 mixed with Liquid WPC. (c) Applying Oil bound bitumen primer @ 0.30 liter/Sqm manufacture by the same agency as that of APP with a density 0.87-0.89 Kg per liter at 25 degree centigrade on prepared surface. (d) Laying of membrane not less than 3.0 mm thick APP modified water proofing membrane weighing not less than 3.60 Kg/Sqm reinforced with non woven polyster fiber weight not less than 160 Gms/Sqm using butane torch by torch application with 10 Cm side laps and 15 Cm end lap complete. (e) APP membrane shall be laid using butane torch by Torch application with minimum 10cm side overlap and 15cm end lap. (f) Top of membrane shall be provide with solar reflective bituminous aluminum paint @ 0.1 Kg /Sqm as prescribed by manufacture of membrane. (g) APP Membrane shall be stick inside parapet where available not more than 150 mm ht from roof top by chase cutting and sealed with PCC (1:2:4) type B-0 complete. (h) Only flat roof area shall be measured and paid.
Taking down eaves gutters and rainwater pipes 100 mm dia (any size or pattern), including all fitting, head, shoes, bend, swan-nacks etc., including cleaning or refixing or removal to store complete all as specified and directed.
Supply and fixing of PVC(SWR) pipes 110mm dia bore, single socketd , in any length with rubber ring joints , in any length fixed to walls with and including clamps complete all as specified and directed.
Supply and fixing of PVC (SWR) bend with ovel accessed door any radius 110mm dia bore complete all as specified and directed.
Supply and fixing in repair 100 mm bore sand cast iron soil waste and vent pipes ISI marked in any length with or without ears laid in floor with lead joints complete all as specified and directed.
Supply and fixing in repair in 75 mm bore sand cast iron soil waste and vent pipes ISI marked in any length with or without ears laid in floor with lead joints complete all as specified and directed.
Supply and fixing in repair CI floor trap 75 mm with grating including jointing to waste pipe fixed in cement concrete 1:2:4 type B-1 with CP grating with or without hole for waste pipe complete all as specified and directed.
Supply and fixing in repair CI floor trap 100 mm with grating including jointing to waste pipe fixed in cement concrete 1:2:4 type B-1 with CP grating with or without hole for waste pipe complete all as specified and directed.
Supply and fixing in repair 100 mm dia CI bends (any radius) diminishing pieces or tapers (larger bore measured) complete all as specified and directed.
Supply and fixing in repair 75 mm dia CI bends (any radius) diminishing pieces or tapers (larger bore measured) complete all as specified and directed.
Supply and fixing in repair Cast Iron Branch peices, single(equal or unequal) ordinary or inverted (spigot or socket type), or with parrallel branches fitted with oval access doors of 100 mm bore dia complete, ISI Marked, complete all as specified and directed.
Supply and fixing in repair Cast Iron Branch peices, single (equal or unequal) ordinary or inverted (spigot or socket type), or with parrallel branches fitted with oval access doors of 75 mm bore dia complete, ISI Marked, complete all as specified and directed.
Supply and fixing in repair cast iron cowl for 75 mm dia complete all as specified and directed.
Supply and fixing in repair 100mm bore sand cast iron soil waste and vent pipes ISI marked in any length with or without ears fixed to walls with clamps and cement joints complete all as specified and directed.
Supply and fixing of GI pipe 32 mm dia light grade (in short length) as spout pipe in sunken floor slab laid in slope to brick wall with PCC (1:2:4) type B-0, complete all as specified.
Material and labour for 10 mm thick cement plaster in cement mortar 1:3 on brick or concrete surface of sunken floor finished even and smooth using liquid WPC as per manufacturer instruction @ 0.200 ltr in 50 Kg of cement complete all as specified & directed Note:WPC shall be measured and paid separately.
Material and labour for bitumen blown any grade, applied hot, two coats, to concrete/plastered surfaces at the rate of 1.5 Kg per sq m per coat and applying polythene film black, 50 micron complete for sunken floor slab and embedded in side wall / covered fillet complete all as specified and directed.
Supply only liquid water proofing compound complete all as directed.
Material and labour for 25 mm thick PCC type B-1, 1:2:4 (using 20mm graded aggregate) as in sub floors for laying floor finish complete all as specified and directed.
Material and labour for PCC 1:5:10 type E2 using 40mm graded stone aggregate as in foundation filling and mass concrete (sunken floors etc.) complete all as specified and directed.
Taking down chowkats or frames of any description not exc 1.50 Sqm each with shutters, (without taking off shutters from the frame) including builders hardware complete all as specified and directed.
Taking down chowkats or frames of any description exc. 1.50 Sqm and n.exc 4.00 Sqm each with shutters, (without taking off shutters from the frame) including builders hardware complete all as specified and directed.
Taking down shutters of any description not exc 1 Sqm each complete all as specified and directed.
Taking down shutters of any description exc 1 Sqm and n exc 2 Sqm each complete all as specified and directed.
Taking down shutters of any description exc 1 Sqm and n exc 2 Sqm each including refixing in same opening after easing and adjusting complete all as specified and directed.
Supply and fixing of 40mm thick Factory made 2nd class hardwood Plain, framed, panelled door shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers: supplied and fitted to chowkats complete all as specified and directed.
Supply and fixing of 35 mm thick factory made UV 3D printer flush door wood free consisting 5 mm thick solid pannel PVC sheet on both side (both side multicolour UV 3D printed) and consisting of frame made out of MS tube of 19 gauge thickness and size of 19mm x 19mm for stiles as well as top, bottom and lock rail , The inside panel shall be consist 25 mm thick rigid solid PVC board complete as per direction of Engr in Charge.
Supply and fixing of 30 mm thick Glass Fibre Reinforced Plastic (FRP) panelled door shutter of required colour and approved brand and manufacture, made with fire - retardant grade unsaturated polyester resin, moulded to 3 mm thick FRP laminate for forming hollow rails and styles, with wooden frame and suitable blocks of seasoned wood inside at required places for fixing of fittings, castm onolithically with 5 mm thick FRP laminate for panels conforming to IS: 14856, including fixing to frames, complete as specified by the manufacturer and as per directions of Engineer- in-charge.
Supply and fixing of 35 mm thick single piece factory made wire gauge door shutter and incl of wire cloth ( stainless steel & aluminium XPM) manufacturing by PVC sheets printed 5 mm thick on both side on frame made out of M.S. tube 19 SWG, size 19x19 mm complete in all respect with lock rail & beautified by PVC beading all around fixed with PVC solvent cement complete as per Drg No. CEPZ/TD-378/Sheet 1/1 dated 27/12/2011 complete all as specified and directed.
Supply and fixing of Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 65 x 125 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum comp ressive strength of 58 N/mm2 , modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made.
Supply and fixing of Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 50 x 125 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum comp ressive strength of 58 N/mm2 , modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made.
Supply and fixing of Solid PVC cupboard door Frame of size 50mm x 47mm made out of 5mm wood grain printed PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing complete in all respect as specified and directed.
Supply and fixing in repair 18 mm thick lead free factory made 100% Solid WPC (Wood Polymer composite) board one side printed and other side wood nature colour having high natural fiber contains 25 to 30% wood colour sheet with density not less than 600 kg /Cbm bent 90°and the weight of sheet of 1 sqm should be 11 kg(+/- 5%) manufacture by ISO-9001-2015 certified company, the sheet should be 100% termite/water proof, fire rertradent, Eco friendly, and finish at all edges at level for making edges lipping using binding tape etc as in Kitchen cupboard, Cabinet etc complete all as specifed and directed. Note ; PVC edge binding tape shall be measured and paid separately.
Supply and fixing in repair 12 mm thick lead free factory made 100% Solid WPC(wood particle composit) board having both side wood nature colour for cupboard partitions of density 600 kg /Cbm bent 90°, manufacture by ISO-9001-2015 certified company, the sheet should be100% termite/water proof, fire rertradent, Eco friendly, including taking down existing decayed sheet complete as per direction of Engr-in-charge.
Supply and fixing of 300 mm long aluminium alloy, sliding door bolt with hasp & staple (bolt type) and fixing clips of sheet cast or extruded section and fixing bolts and sliding bolts complete all as specified and as directed.
Supply and fixing of aluminium anodized barrel tower bolts 200 mm of extruded section and fixed complete all as specified and directed.
Supply and fixing of 125 mm size aluminium alloy handles, febricated type extruded section, ISI marked complete all as specified and directed.
Material and labour for 3 mm thick sheet glass ordinary quality and glazing with oil putty or fixed with bead / glazing pins in squares size n.exc 0.5 sqm in each pane all as specified and directed.
Supply and fixing of factory made 5mm thick WPC(Wood polymer composite) board one side prelam sheet for kitchen cabinet/cupboard of density 600 kg /Cbm bent 90° complete all as specified and directed.
Material and labour for 0.80 mm thick PVC edge binding tape around the 18 to 20 mm thick PVC shutter edge colour as directed, complete all as specified and directed.
Supply and fixing of 100 mm size aluminium alloy handles, febricated type extruded section, ISI marked complete all as specified and directed.
Supply and fixing in repair continuous (piano) hinges, mild steel, bright finish width of flaps (when open ) 40 mm all as specified and directed.
Supply and fixing in repair 100mm size hasp and staple, aluminium anodised safety type, fixed with screws complete all as specified and directed
Supply and fixing of 50 mm dia polished hardwood knobs fixed with screws complete all as specified and directed.
Supply and fixing of Magnetic ball catcher for cupboard shutter of approved pattern fitted with suitable screws complete all as specified and directed.
Supply and fixing of stainless steel plain basket of size 17''x20''x6'' (as per sample) complete all as specified and directed.
Supply and fixing of stainless steel partition of size 17'' x 20'' x 6'' complete all as specified and directed
Supply and fixing of Stainless steel cutlery of size 17''x20''x6''(as per sample) complete all as specified and directed.
Supply and fixing of stainless steel grain troly with stand of size 21" x 20" x 10" complete all as specified and directed
Supply and fixing of Stainless steel cup & soucer of size 17''x20''x4''(as per sample) complete all as specified and directed.
Supply and fixing of Stainless steel plate basket of size 17''x20''x6'' (as per sample) complete all as specified and directed.
Supply and fixing of Telescopic type Side channel of drawer of standard size incl roller for moving drawer made out of mild steel bright finish or electro galvanised ( soft close ball bearing runners) with width of flap 30mm & 60mm long complete all as specified.
Supply and fixing of Stainless steel auto, zero crank hinges, fancy type (as per sample) with concealed pattern fitted to shutters complete all as specified and directed.
Supply and fixing in repair 20 mm bore stainless steel powder coated, single curtain rod (wall thickness not less than 1mm) including fancy type brackets, funnels etc suitable for single curtain rod, fixed in repair, etc complete all as specified and approved by GE.
Supply and fixing in repair 150 mm MS helical door spring for door closer including roller and roller plate complete all as specified and directed.
Material and labour for repair to RCC structural members such as sunshades, balconies, Beams, Facia, and similar RCC structure as per the following precedence of application including necessary formworks and scaffolding if required upto 7 m height. (a) Taking down the damaged loose/cracked plaster/concrete from RCC surface in any thickness. (b) Applying one coat of steel bar coat of rust preventive PH RB-167/rust free/SHIELDOXY including preparing, cleaning of corroded steel all as per manufacturers instructions complete including providing additional reinforcement on required basis and properly binded, overlap with the existing reinforcement and maintaining sufficient developement length/Anchorage length at the junctions to be inserted in the bearings to acknowledge proper bond with the surrounding concrete complete all as specified and as directed. (c) Providing/ filing the plain cement concrete 1:1.5:3 type A-0 using 12 mm graded stone aggregate upto the depth/thickness varrying from 15 to 45 mm. (d) Rendering 5 mm thick in CM 1:3 and Applying two coats of exterior emulsion paint over a coat of primer complete all as specified and directed. Note:- The additional reinforcement shall be measured and paid separately.
Material and labour for mild steel TMT bars 10mm dia and over cut to length, bent to shape, required including cranking, bending, spirally for hopping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.
Demolition of cement concrete of any description in any position not otherwise specifically provided for, complete all as specified.
Material and labour for Reinforced cement concrete type B1 1:2:4 nominal mix (using 20mm graded aggregates) in slabs supported on walls beams, columns etc complete all as specified and directed.
Material and labour for use and waste of formwork to soffits of concrete fair finished surfaces of suspended slabs such as roof slab,floor slabs landings and similar works not exc 200 mm thick complete all as specified and directed.
Material and labour for framed work such as grills, gratings, manhole's cover etc. with ends of bars shouldered and / or riveted or forget into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railings, framework of water tanks and similar work for portions framed and hung as gates including pintle hinges, stops, hand-made sliding bolts etc. conforming to Fe-290 Gde E-165, complete all as specified and directed.
Supply and fixing of Pre- painted galvalume aluminum zinc coating GI based plain steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in projected sunshade make to shape, fixed with self tapping screws, complete all as specified and directed.
Material and labour for frame work for sunshade made with hollow MS pipe and flat iron incl welding ,reviting ,cutting hole to brick wall ,chase cutting for inserting sheet to wall incl filling with PCC 1:2:4 type B0 with necessary scaffolding complete all as specified and directed.
Supply and fixing in repair 15mm bore tubes medium grade galvanized ISI marked with all fittings short pieces and fixed complete to walls, floor, ceiling including taking down unserviceable tubing etc complete all all as specified.
Supply and fixing in repair 20mm bore tubes medium grade galvanized with all fittings short pieces and fixed complete to walls, floor, ceiling including taking down unserviceable tubing etc complete all as specified.
Supply and fixing in repair Vitreous china wash down water closet pan pedestal pattern, white (excluding supply of flushing cistern and flush pipes, but including fixing there of), including making connections to trap, and to flush pipe incl plastec seatcover closed pattern with stainless steel or aluminised hinging device complete all as specified and directed.
Supply and fixing in repairs ovel type Counter top Vitreous china wash basin, white of size 550 x 400 mm including 32 mm bore CP waste pipe long screw thread and 32 mm dia flexible waste pipe incl fixing of central hole mixer all as spd and directed.
Supply and fixing in repairs Vitreous China wash basin, white, flat back, size 450x300mm including brackets, 32 mm bore CP waste pipe long screw thread and 32 mm dia flexible waste pipe incl fixing of taps all as spd and directed.
Supply and fixing of PVC flushing cistern 10 ltr capacity incl PVC connection inlet and and outlet connections,brackets, PVC flush pipe with bend 32 mm dia of suitable length including making necessary connections to water supply pipe line and jointing to WC all as specified and directed.
Supply and fixing in repair SS double bowl kitchen sink of 45" x 20" x 10" size including all the accessories and making connections to fixed in walls including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe complete all as specified and directed.
Supply and fixing in repair fancy type angular Stop cock 15mm bore pipe, CP cast copper alloy complete all as specified and directed.
Supply and fixing in repair Bib taps for 15 mm bore pipe, cast copper alloy chromium plated complete all as specified and directed. .
Supply and fixing in repair fancy type long body Bib taps for 15 mm bore pipe, cast copper alloy chromium plated complete all as specified and directed.
Supply and fixing in repair 3-in-1 wall mixture with telephonic shower for 15 mm bore pipe, cast copper alloy chromium plated complete all as specified and directed.
Supply only chromium plated brass central hole single lever WHB Mixture 15 mm bore for mixing hot and cold water with 450 long braided house 20 cartriage size screwed down, high pressure screwed for iron pipe complete all as specified and directed.
Supply and fixing in repair 15 mm bore fancy type Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed, complete all as specified and as directed.
Supply and fixing in repair high grade of stainless steel folding towel rack for bathroom of size 50.2 x 36.6 x 5.8 cm with 4 double cross towel hook and swivel towel bar complete all as specified and directed.
Supply and fixing in repair glass corner shelf quarter round with CP Brass Bracket, complete all as specified and directed.
Supply and fixing in repair health foucet hand shower 8mm dia 1mtr long flexible pipe, hook and wall hook complete all as specified and directed.
Supply and fixing in repair PVC connections 15mm size with PTMT nuts of length 450mm complete all as specified and directed.
Supply and fixing in repair Stop valve concealed type cast copper alloy (ISI Markd) fancy type, chromium plated with long shank and cup screwed down high pressure with capstan head screwed both ends for iron pipe 15mm bore dia complete all as specified and directed.
Supply and fixing in repair CP soap nich fixed to walls with chromium plated (CP) brass screws complete all as specified and directed.
Supply and fixing of vitreous china, squatting Pan 'Orissa' pattern 'white' size 580mm x 440mm white with integral footrest including CI 'P' or 'S' trap provision of lean concrete bedding, connection to drain out pipe and to flush pipe anti syphonage pipe etc complete including making good to floor where required all as specified.
Supply and fixing in repair gun metal, gate valves suitable for 20 mm bore iron pipe, cast copper alloy, screwed down, high pressure, with wheel head/butterfly handle, screwed both ends for iron pipe or for unions, complete all as specified and directed.
Supply and fixing in repair gun metal, gate valves suitable for 15mm bore iron pipe, cast copper alloy, screwed down, high pressure, with wheel head/butterfly handle, screwed both ends for iron pipe or for unions, complete all as specified and directed.
Supply and fixing in repair Swivel shower of CP brass of size 200 x 200 mm size of 450mm long for fixing with 15mm pipe with 45 degree with flange complete all as specified.
Supply and fixing of rotational moulded polyethiene water storage tanks of capacity 1000 litres, (cylindrical vertical with closed top) hoisted and fixed in position including necessary GI fittings, inlet/outlet washout, ball velve, overflow pieces long nipples, checknuts & washer etc complete including dismantling existing water tank complete all as specified & directed.
Supply and fixing of rotational moulded polyethiene water storage tanks of capacity 500 litres, (cylindrical vertical with closed top) hoisted and fixed in position including necessary GI fittings, inlet/outlet washout, ball valve, overflow pieces long nipples, checknuts & washer etc complete including dismantling existing water tank complete all as specified & directed.
Material and labour for termite treatment along the external wall below concrete or masonry apron using chemical emulsion@ 2.25 litres per linear metre including drilling and plugging holes etc. in apron complete all as specified and directed.
Material and labour for termite treatment of soil under existing floors using emulsion @ one litre per hole,300mm apart including drilling and plugging 12mm dia holes with cement mortar 1:2 (1 cement: 2 coarse sand) tomatch the existing floors complete all as specified and directed.
Supply and fixing of stainless steel Peg set of six fitted with machine screws and wooden and plastic cleats (minimum wt 190 gms), complete all as specified and directed.
Supply and fixing of ruber lining fitted with aluminium powder coated strip 100mm wide for door cill, completed all as directed.
Supply and fixing 250 mm dia CP brass Towel Ring fixed with SS screws and rowel plug complete all as specified and directed.
Excavation in trenches not exc. 1.5m wide for foundation etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sqm on plan and n exc 1.5m in depth in any type of soil and getting out, complete all as specified and as directed.
Demolition of brick work or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars,drains etc, but excluding ashlars facings, dressed stone work and precast concrete articles complete all as specified and directed.
Returning, filling in (soil), including spreading, leveling, watering and well ramming in layers not exc. 25cm, complete all as specified.
Removing excavated materials to a distance not exc. 50 mtr and depositing where directed at a level n exc 1.5m above the starting point complete all as specified and directed.
Supply and laying of 160mm bore UDS pipes, type 'A' having nominal ring stiffness should be 2 KN/m2 with one collar per length of pipe incl necessary fittings and connecting to existing manholes by cutting out and making the surface good to pipe, the UDS pipe should meet the pressure requirements as per IS 15328:2003 complete all as specified and directed by Engineer-in-Charge.
Demoliton/breaking of drain pipes of 150mm dia pipe with haunching etc (salt glazed stone ware, AC or reinforced concrete pipes) set in cement mortar and taking out off trenches and removing the debris from the site, complete all as specified and directed.
Material and labour for concrete bed to drain pipes including haunching against the side of the pipe and forming cradles after they are laid and tested in cement concrete 1:4:8, type D2 for 160mm bore, complete all as specified and directed.
Material and labour for Brick work with flyash old size bricks straight or curved on plan exc 6m mean radius built in CM 1:4 complete all as specified and directed.
Material and labour for providing precast cement concrete 1:2:4, type B1 (20 mm graded aggregate) set in CM 1:6, as in cover slabs for manholes ,drain etc with plain fair faces casted in angle iron frame(Angle iron frame measured and paid separetaly) complete all as specified and directed.
Material and labour for Cutting Salt Glazed drain pipe of 150 mm dia pipe in position, including jointing socket end of new pipe to same with packed spun yarn and cement mortar 1:1, complete all as specified and directed.
Taking down carefully point wiring with copper/aluminium conductor for light, fan, socket or power including fittings such as switches, sockets, light fitting any type, holders, (batten type and pendent), ceiling rose, wooden boards, shades any type and making good dismantled surfaces, complete all as specified & directed.
Material and labour in replacement of Point wiring using FRLSH PVC insulated unsheathed /multi stranded copper conductor cable 1.5 sqmm including 1.5 Sqmm FRLS PVC insulated unsheathed copper conductor earth wire in green colour connected to common earth dolly drawn through and including concealed PVC conduit of appropriate size not less than 20 mm dia and 1.8 mm thick including all fittings viz tees, bend, junction box and modular metal flush sunken box 1.6 mm thick with suitable support frame and cover plate (inner/outer) of required modules for mounting switches, sockets, fan regulators, connecting earth for light/fan/bell point including cutting chases in walls and making good to disturbed surface complete all as specified and directed . Note : a) Switch/bell push/fan regulator shall be measured and paid separately. b) In ceiling portion surface conduit wiring shall be carried out.
All as per Srl item No. 141 above but for one light point controlled by two switch 10 Amp, SP, two way, complete all as specified and directed.
All as per Srl item No. 141 above but for 5 pin 5 Amp socket outlet point on same board controlled by one switch 5Amp one way, complete all as specified and directed.
All as per Srl item No. 141 above but for one 5/15Amp socket outlet point concealed using 2.5Sqmm FRLSH PVC insulated multi-strand copper conductor wire including 2.5Sqmm FRLSH PVC insulated unsheathed copper conductor earth wire and making good to disturbed surfaces of wall floor to match existing finishes complete all as specified and directed.
All as per Srl item No. 141 above but for one 15Amp socket outlet or metal plug top for AC/geyser point concealed using 4.0 Sqmm FRLSH PVC insulated multi-strand copper conductor wire including 4.0Sqmm FRLSH PVC insulated unsheathed multi stranded copper conductor earth wire and making good to disturbed surfaces of wall floor to match existing finishes complete all as specified and directed.
Supply and fixing in replacement of modular switch one way 6/10 Amp one module, complete all as specified and directed.
Supply and fixing in replacement of modular switch two way 6/10 Amp one module, complete all as specified and directed.
Supply and fixing in replacement of modular socket 5/6 Amp, 2/3 pin mutipurpose, 2 module, complete all as specified and directed.
Supply and fixing in replacement of modular switch piano one way, 16 Amp, one module, complete all as specified and directed.
Supply and fixing in replacement of modular socket 6/16 Amp, 2/3 Pin multipurpose, 2 module, complete all as specified and directed.
Supply and fixing in replacement of modular bell push switch 6 Amp one module, complete all as specified and directed.
Supply and fixing in replacement of Fan regulator modular step type suitable for 1200mm sweep ceiling fan hum free, 120W- 2 module including necessary connections complete all as specified and directed.
Supply and fixing in replacement of bell ding dong AC 203 volt, single pole, complete all as specified and directed.
Supply and fixing in replacement of Ceiling rose polycarbonate isolated body surface Bakelite, not less than 65 x 50 mm, three terminals, AC 230 volts etc, complete all as specified and directed.
Supply and fixing in replacement of Lamp holder, insulated body, with back plate for batten fittings including 15W LED lamp, complete all as specified and directed.
Supply and fixing in replacement sheet metal enclosure MCB distribution board Single pole & neutral 240 volts 04 way with IP-43 IK-09 protection double door complete with appropriate size bus bar and neutral link fixed flush in wall including chases wall for fixing DB and making good distributed wall surfaces to match with existing specification complete all as specified and directed.
Supply and fixing in replacement sheet metal enclosure MCB distribution board Single pole & neutral 240 volts 08 way with IP-43 IK-09 protection double door complete with appropriate size bus bar and neutral link fixed flush in wall including chases wall for fixing DB and making good distributed wall surfaces to match with existing specification complete all as specified and directed.
Supply and fixing in replacement single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB 16- 20 Amp complete all as specified and directed.
Supply and fixing in replacement MCB single pole (SP) 240 volts, 50Hz, 6 to 32 Amps, 10KA (B-series) complete all as specified and directed.
Supply and fixing in replacement MCB SPN 240V, 50Hz, 40-63Amps, 10 KA (C-series), complete all as specified and directed.
Material and labour for sub main wiring with two run of single core FRLSH, PVC insulated, multistranded, unsheathed copper conductor cable of size 06 Sqmm 1100 V drawing through & including suitable size of non metallic PVC rigid conduit concealed in wall including one run of earth continuity conductor of size 06 Sqmm PVC insulated unsheathed multi stranded copper conductor cable 1100 V including connecting to main board complete all as specified and as directed. Note: Two run of submain wire (phase and neutral) and one run of earth including PVC conduit and accessories will be measured as one run.
Supply and fixing of 20W surface/wall mounted box type batten LED luminaire, extruded aluminium housing with PC diffuser and integrated electronic driver with high efficiency long life, CRI=80(Minimum), PF>0.95, luminous efficacy > 100 lumens/Watt operating voltage 140V-240V, colour temperature (CCT) = 5700 + 300K, THD < 10% complete with all accessories internally prewired and including connection up with 3 core flexible copper conductor cable of suitable size from ceiling rose to connector of LED fitting complete all as specified and as directed.
Supply and fixing in replacement of Wall mounted decorative bracket light with injection moulded ABS body and unbreakable ribbed transluscent globe 15Watt with and including led lamp of 15 watt, complete all as specified and directed.
Supply and fixing of box type 10 Watt LED 2 feet length as mirror light with all accessories internally prewired and including connection up with 3 core flexible copper conductor cable of suitable size from ceiling rose to connector of LED fitting complete all as specified and as directed.
Supply and fixing Energy saving, surface mounted bulk head luminaire 9/10W made of pressure die cast aluminium housing with IP 65 protection complete including connecting up with three core twisted flexible copper conductor cable of suitable size complete all as specified and directed.
Supply and fixing in replacement of prewired sheet metal enclosure Vertical type (VTPN) distribution board, double door, tripple pole & neutral 415 volts degree of protection IP-65 DBs TPN 4 way suitable for MCCB as incommer and as outgoing MCB incl MCCB 415 V 63/100 Amp 16 KA as incomer and 16 Nos MCB SP of Cap upto 63 Amp as a outgoing complete with appropriate size bus bar and neutral link, fixed flush in wall including chases wall for fixing DB and making good distributed wall surfaces to match with existing specification, complete all as specified and directed.
Supply and fixing in replacement of bldg security light fittngs with new LED street light fitting 25 Watts, IP 65, having pressure die cast alumn alloy housing, prismatic polycarbonate cover including making connection with 3 core copper flexible cable of size 23/.0076 including galvanised iron bracket 0.90 mtr long of suitable dia bend in shape as required and fixing with bldg for fixing of street light fitting all as directed by Engr-in-Charge.
Material and labour in replacement for earthing complete with galvanized steel earth plate electrode 60cmX60cmX6mm thick buried directly in ground (earth plate not less than 2.25 mtr deep below the normal ground level) with top edge of plate not less than 1.5 mtr below the normal ground level connected to galvanized earth lead wire of 4.0mm dia by means of nuts bolts, washers, check nuts of iron or steel including PCC pits and RCC cover in PCC 1:2:4 (type B-1) and necessary earth work in any type of soil medium grade GI watering pipe 20 mm dia with funnel and wire mesh and 15mm bore GI pipe light grade protection pipe upto test point etc including excavation and charcoal, common salt surrounded with 15cm all around the plate all as specified and shown in EP-3 of SSR Part-I. all specified
Material and labour in replacement for taking down ceiling fan for repairing and after repair it, refixing the same as directed by Engr-in-Charge.
Dismantling of winding by cutting, cleaning slouts and re-winding of AC ceiling fan motor1200mm/1400mm of any make/model of fan with super enameled heat resistant copper winding wire of existing gauge & nos of turns including, sleeve work, varnishing with E class insulation, greasing , threading, connection with flexible wire 0.472 mm copper wire upto connector block and re-assembling and testing for 4 Hrs after repair complete all as spd and directed ( Repairs will be measured and paid for separately under respective items) Note :-(i) Motor shall be wound with machine only and repair of fan inside complex / office of GE (S) Mamun. (ii) Khaitan/RPG/KEI or equivallent make super enameled copper winding wire shall only be used. (iii) Rates are deems to be included cost of repair /servicing & replacement of minor spare part i.e. blade screws, clamps terminal connection , split pin spring washer etc.
Material and labour for replacement of old unserviceable gun metal bush of ceiling fan complete all as specified and directed.
Material and labour for replacement of old unserviceable capacitor AC 415 volts 2.5 mfd oil filed ISI marked complete all as specified and directed.
Material and labour for replacement of old unserviceable ball bearing of suitable size as per existing make and size of ceiling fan complete all as specified and directed.
Material and labour for servicing of ceiling fans of capacity 1200/1400mm including taking down from site , dismantling, cleaning, greasing/oiling of bush and bearings, replacement of set of split pins, cotter pins, blade screws, cup of both side and refixing to the existing site after servicing complete all as directed.
Material and labour for replacement of old unserviceable fan blades as per existing shape, colour and design suitable for 1200/1400mm sweep ceiling fan of any make complete all as directed.
Material and labour for replacement of removing old paint by scraping with sand paper including washing and filling cavaties with filter and applying two coats of painting to ceiling fan 1200-1400mm sweep at workshop with heat resistant synthetic enamel paint by spray painting incl, writing MES No on the ceiling fans as directed. Note: Paint qaulity and colour shall be got approved from GE.
Material and labour for replacement of old unserviceable outer body of ceiling fan (bottom and uper cover plate incl all fitments such screws, gasket cover canopy of both side etc complete all as specified and directed by Engr-in-Charge and as per site requirement.
Supply and fixing in replacement existing unserviceable canopy top & bottom of ceiling fan as per existing size & shape complete all as specified and directed.
Material and labour for servicing of exhuast fans of capacity up to 450 mm including taking down from site, dismantling, cleaning, greasing/oiling of bush and bearings, replacement of outer gasket and nut & Bolts incl cleaning of outer part & fixing wall and refixing to the existing site after servicing complete all as directed by Engr-in-Charge. Note : i) Contractor shall deployed one elect & one helper for servicing at site on all working day for the period of contract. ii) Unserviceable parts if any will be measured and paid seperately.
Material and labour for dismantling and Re-winding of exhaust fan/industrial wall mounting fan/pedstral fan motor 250-380mm sweep any make of fan with super enameled heat resistant copper winding wire 31 SWG to 34 SWG including cutting and getting out old brunt winding, sleeve work, varnishing with E class insulation greasing, threading, connections with twin core copper flexbile wire of size 23/0.0076mm of length not more than one mtr with each fan complete all as spd and directed. Note :- (i) Motor shall be wound with machine only. (ii) Khaitan/RPG/KEI /RR or equivallent make super enameled copper winding wire shall only be used. (iii) Exhaust fan are deems to be included cost of repair /servicing & replacement of minor spare part i.e. body screws, clumps , clips etc.
Supply and fixing in replacement existing unserviceable shutter and lover of exhaust fan as per existing size & shape complete all as specified and directed.
Supply and fixing in replacement existing unserviceable MS fan blade of exhaust fan as per existing size & shape complete all as specified and directed.
Material and labour for lathe work incl re-alignment to rotor, stater sloter, cleaning welding , bracing and polishing etc and refixing after repair and testing complete all as specified and directed by Engr-in-Charge.
Supply and fixing in repelacement of existing un-serviceable meter box with new meter box enclosure polycarbonate body thermoplastic type IP-65 protection suitable to accommodate four nos electronic meters having provision of fixing of meters inside the enclosure complete all as spd and directed by Engr-in-chrage. Note:- (i) The meter should be flush fixed and making good the distrubed surface matching with existing specifications shall be part of the job at no extra cost. (ii) Meter box should have individual transparent veiwing window for checking the serviceability of the meters.
Material and labour for repair of energy meter after changing of UNSV spare parti.e. PCB board, Indicator , display boardetc. wiring along with sealing of meter complete all as specified and directed by Engr-in-Charge Note : Spare part items to be included in qoated rate. Note: Contractor will provide the written warranty for one year with proper location bldg No , meter Nos and dated of repair to the MES.
Taking down carefully from wall after unscrewing nut/bolts geysers 50/25 ltr capacity and strip opening the same for taking out internal tank, syphon assembly etc and re-assembling and re-fixing after repair, UNSV spares parts to be replaced incl descaling of water stoarage tank and testing complete Note: Supply & replacement of spare part shall be measured under respective items of Sch here-in-after.
Supply and fixing in replacement internal SS tank as per site requirement of geyser 25 ltr capacity complete with syphon –assembly, 1.5 kw round element , rubber gasket , thermostat switch , all as specified and directed. Note: The tank shall be tested at site and shall be able to with stand the requisite pressure. Necessary testing equipment shall be arranged by the contractor . Tank with stud type round element shall only be used.
Supply and fixing in replacement of syphon assembly of 6 hole/09 holes as per site requirement made out of brass of 25 ltr capacity (ISI marked) including necessary studs screws and rubber gasket/washers complete all as specified and directed.
Supply and fixing in replacement of thermostat switch (ISI marked) suitable for geyser 25 ltr to 50 ltr, AC 230 volt adjustable range from 0-90 degree Celsius as per exisiting size, make and shape complete all as specified and directed.
Supply and fixing in replacement of heating element titanium coated of rating 1.5/2 KW suitable for geyser any type and make as per existing and site requirement incl gasket washer (ISI marked) geyser element AC 230 volt complete all as specified and directed.
Supply and fixing in replacement of outer body suitable for 25 ltr geyser with rust proof made out of CRCA sheet (16 gauge) 1.5 mm thick electro statically powder coated stove enamelled factory made complete with fixing bracket matching with existing and nuts and bolts to fixed to wall complete all as specified and directed.
Supply and fixing in replacment of indicator lamp (green and red) with neon lamps (ISI marked) indicating automatic working of geyser round/square type as per existing and suitable for geyser 25/50 ltr all as per sample AC 230 Volt complete all as specified and directed.
Supply and fixing in replacment cable flexible PVC insulated, PVC sheathed, copper conductor, 3 core 2.5 sqmm (ISI marked ) 1100 volts grade.
Supply and fixing in replacment of geyser connections pipes for hot & cold water supply made out of stainless steel wire braided connector with crome finish heavy duty nuts of 15 mm dia size with suitable length and as per existing site condition incl taking down of old UNSV pipes complete all as specified and directed.
Supply and fixing anchor bolt 12mmX100mm long complete all as specified and directed. Note:- Anchor bolt shall be grouted with hammer drill only
Material and labour for preparing the old painted steel surface by rubbing/scratching the old paint and painting with the two coats of synthetic enameled paint white with spray gun incl MES No with black paint of required size and shape complete of 25 ltr geyser complete all as specified and directed by Engr-in-Charge.
Supply and fixing in replacment bottom cover plate of geyser of capacity 25/50 ltr complete with MS screw all as per sample complete all as specified and directed.
Supply and fixing in replacement of non return valve (ISI marked ) suitable for 25 ltr to 50 Ltr geyser capacity made out of brass for bore dia of pipe 15 mm dia and as per site requirement and shape and size complete with all as specified and directed
Supply and fixing in replacement of thermal insulation material non hygroscopic , fire resistant , fiber glass wool for suitable for 25 to 50 ltr cap geyser complete with taking out old material complete all as specified and directed.
Supply and lay in replacement of cable LT XLPE insulated armoured heavy duty electric cable with aluminium counductor, 1100 volts grade of crosssectional area 50 Sqmm 3.5 Core complete all as specified and directed.
Material and labour for sand cushioning for cables 8 cm below the cable and 15 cm above the cable all as specified and directed
Material and labour for old size brick sub class B well burnt, laid flat for cable protection complete all as specified and directed.
Material and labour for replacement of GI tubing light grade 50 mm bore for passing through cables under the floor, along the wall or along the pole complete all as specified and directed.
SATISH AND CO
Abrol construction co
M/S DUGGAL CONSTRUCTION CO
M/S CANTILEVER ENGINEERS
Shiva Builders
Ms Tarsem Kumar Sharma
v k engineers and builders
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .