88399/E8

Amount

REVISED BOQ UPLOADED ON 14 JUL2020, BOQ UPLOADED ON 01 JUL 2020 CANCELLED.

SCH "A" PART-I (CIVIL WORKS)

Taking down chowkats or frames with shutters of doors / windows including guard bars (without taking off shutters from the frames) not exceeding 1.50 sqm each and taken on credit complete all as specified and as directed.

Taking down chowkats or frames with shutters of doors / windows including guard bars (without taking off shutters from the frames) exceeding 1.50 sqm but not exceeding 4.00 sqm each and taken on credit complete all as specified and as directed.

Taking down shutters of any description exceeding 1 sqm but not exceeding 2 sqm each and taken on credit complete all as specified and as directed.

Taking down shutters of any description exceeding 1 sqm but not exceeding 2 sqm each and refixing in the same opening complete all as specified and as directed.

(a) The rate is deemed to include easing and adjusting the shuters, altering the size of shutters to suit the floor levels after laying of the flooring.

(b) The rate is deemed to include refixing of builders hardware and renewal of builders hardware as required shall be measured and paid separately as supply only.

Taking down cement plaster any description on brick or stone walls, concrete surfaces, ceiling, etc. including raking out joints, hacking for key, scrubbing down with water, etc. and removal of unserviceable debris out of MD land complete all as specified and as directed.

Taking up or down steel tubing and connections, and taken on credit of bore of pipe 15mm complete all as specified and as directed.

Taking up or down steel tubing and connections and taken on credit of bore of pipe 20mm complete all as specified and as directed.

Dismantling existing water tanks, exceeding 250 litres and not exceeding 500 litres, lowering and taken on charge on credit complete all as specified and as directed.

Demolition of brickwork or stone boulder masonry, built in cement mortar, including all quoins, arches, pillars etc., but excluding ashlar facings, dressed stonework and precast concrete articles and removal of unserviceable debris out of MD land complete all as specified and as directed.

Chipping of loose concrete and broken plastering plastering from chajjas soffits, fins, fascias and applying one coat of rust remover to reinforcement followed by concrete bonding agent to whole exposed face and rendering 20mm thick in CM 1:4, in two coats (10mm thickness each) complete all as specified and as directed.

(a) The rate quoted is deemed to include for rust remover and bonding agent and measured unit shall be for rendering in two coats (i.e 20mm thick).

(b) The rust remover and bonding agent shall of brands SIKA RUST OFF 100 and SIKA ARMATEC 110 EPOCEM respectively of SIKA firm or equivalent of makes listed here-in-after.

Demolition of stone slabs / tiles of any description or thickness in floors or vertical surfaces, as in ceramic tiles laid, bedded and pointed in any mortar including bedding screed and backing in vertical surfaces and removal of unserviceable debris out of MD land complete all as specified and as directed.

Dismantling of stone slabs / tiles of any description or thickness in floors or vertical surfaces, laid, bedded and pointed in any mortar including bedding screed and backing in vertical surfaces and removal of unserviceable debris out of MD land complete all as specified and as directed.

Demolition of cement concrete (un-reinforced) in ground floors and pavings not exceeding 150mm thickness (below or above ground level) and removal of unserviceable debris out of MD land complete all as specified and as directed.

Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for (reinforcement cut as required to facilitate demolition) and removal of unserviceable debris out of MD land complete all as specified and as directed.

Dismantling timber scantlings 40 sqcm and over in section in unframed work in any position as in hand rail and taken on credit complete all as specified and as directed.

Providing and injecting chemical emulsion for Post Constructional Antitermite Treatment along external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc. in apron complete all as specified and as directed.

Providing and injecting chemical emulsion for Post Constructional Antitermite Treatment of soil under existing floors using emulsion @ one litre per hole, 300mm apart including drilling and plugging 12mm dia holes with cement mortar 1:2 (1 cement: 2 coarse sand) to match the existing floors complete all as specified and as directed.

Providing and injecting chemical emulsion for Post Constructional Antitermite Treatment At points of contact of wood work by chemical emulsion (in oil or kerosene based solution) @ 0.5 litre/hole by drilling 6mm dia holes at a downward angle of 45 degree at 150mm centre to centre and sealing the same complete all as specified and as directed.

Reinforced cement concrete, 1:1 1/2:3, type A1, using 20mm graded stone aggregate as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and as directed.

Reinforcement shall be measured and paid separately as applicable.

Reinforced cement concrete, 1:1 1/2:3, type A1, using 20mm graded stone aggregate as in chajjas complete all as specified and as directed.

Reinforcement shall be measured and paid separately as applicable.

Reinforced cement concrete, 1:1 1/2:3, type A1, using 20mm graded stone aggregate as in fins, fascias, louvres, parapets, and railings exc. 60cm in height, newels, balustrade, and the like complete all as specified and as directed.

Reinforcement shall be measured and paid separately as applicable.

Brickwork with fly ash bricks, old size, straight or curved on plan exceeding 6m mean radius built in cement mortar 1:6 of designation 50 complete all as specified and as directed.

Cutting holes in brick walls in cement mortar for inserting holdfasts, depth of embedded portion of holdfasts or lugs measured from the face of jamb into the wall exceeding half brick but not exceeding one brick and making good in cement mortar 1:3 or cement concrete 1:2:4 type B-l as required complete all as specified and as directed.

Use and waste of formwork to soffits of suspended slabs like raised platform slab and similar work not exceeding 200mm thick (horizontal or sloping), flat with rough finished surface of concrete complete all as specified and as directed.

Use and waste of formwork to chullah hoods, chajjas, troughs and similar items incliding edges, flat with rough finished surface of concrete complete all as specified and as directed.

Use and waste of formwork to Formwork to fins, louvers, fascia with rough finished surface of concrete complete all as specified and as directed.

Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, as in IInd class hardwood complete all as specified and as directed.

Handrails rounded or shaped with splayed faces in straight lengths and fixed as in Ist class hardwood (teak) of section 100mm x 75mm complete all as specified and as directed.

Factory made Glazed and skeleton shutters, of IInd class hardwood, 35mm thickopen rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a) complete all as specified and as directed.

Glass or wire cloth as required shall be measured and paid separately.

Flush shutters, 35mm thick, solid core construction, with block board core and plywood face panels, commercial type on both sides and covered with decorative face veneer on both sides with lipping / frame to match complete all as specified and as directed.

Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, fixed in opening as per relevant drawing in SSR Part-II complete all as specified and as directed.

Factory made solid PVC moulded door shutter, with wood free EPS core 28mm to 30mm thick (stiles) with 2, 4 or 6 raised panel design with 2mm thick moulded PVC sheet on the front face and 2mm thick plain colour PVC sheet on the back face all as per relevant drawing in SSR Part-II complete all as specified and as directed.

Veneered decorative plywood, 12mm thick grade I, (with BWR resin), with decorative laminate type 1, 0.90mm thick of surface finish and colour as approved and fixed with approved adhesives as per manufacturer's instructions on both faces, fixed in repairs with screws to timber framework complete all as specified and as directed.

Prelaminated particle board minimum 18mm thick, interior grade, one side prelaminated with decorative choice lamination and other side balancing white fixed with screws to timber framework including lipping with teakwood 6mm thick fixed with nails as in repairs complete all as specified and as directed.

External teakwood lipping 6mm thick to plywood 12mm thick fixed with nails complete all as specified and as directed.

Aluminium anodised barrel tower bolts, of extruded section and fixed, length of bolt 100mm complete all as specified and as directed.

Aluminium anodised barrel tower bolts, of extruded section and fixed, length of bolt 200mm complete all as specified and as directed.

Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy, length of bolt 300mm complete all as specified and as directed.

Butt hinges, medium weight, cold rolled mild steel and fixed / welded to frame of size 100mm complete all as specified and as directed.

Ordinary rat tail rod pattern springs, 300mm, mild steel, including roller and roller plate complete all as specified and as directed.

Continuous (piano) hinges, mild steel, bright finish or electrogalvanised, width of flaps 30mm (when open) as in repairs complete all as specified and as directed.

Aluminium handles, cast type, anodised of size 100mm complete all as specified and as directed.

Aluminium handles, cast type, anodised of size 150mm complete all as specified and as directed.

Mortice lock vertical type, mild steel, size 100mm, 4 levers complete all as specified and as directed.

Locks, brass, drawer, grade I, size 75mm complete all as specified and as directed.

40mm dia, cupboard knobs fixed with nut, screw and washer of brass, polished complete all as specified and as directed.

Floor door stopper of aluminium alloy body and tongue, anodised with hard drawn steel spring, overall length of cover plate 140mm, including fixing on floor complete all as specified and as directed.

Aluminium (die cast) body door closer hydraulically regulated, designation No.1, universal type, suitable for door shutters of 701 to 850 mm in width and of weight between 36 to 60 kg and fixed as in repairs complete all as specified and as directed.

Aluminium alloy wire cloth, 0.45mm nominal dia of wire and average width of aperture 1.40mm and fixed with aluminium wire staples fixed to wooden / steel frames complete all as specified and as directed.

Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors and similar work conforming to Fe-290, Gde-E-65 complete all as specified and as directed.

Mild steel as in small articles such as bands, straps, clamps, hold fast and like conforming to Fe-290 Grade-E-165 complete all as specified and as directed.

Mild steel TMT bars 6mm to 8mm dia as in main reinforcement, cut to length, bent to shape, including cranking and binding with and including mild steel wire (annealed) not less than 0.90mm dia or securing with clips complete all as specified and as directed.

Powder coated, anodised aluminium sliding windows, all as given here-in-after complete all as specified and as directed. Frame:- Three track section shall be of weight not less than 0.495 kg/m. Shutter:- Consists of 03 Nos Shutters i.e 02 Nos of Glazed shutters and 01 No of Gauzed shutter. Sections of shutter (stiles and rails) sections shall be of weight not less than 0.480 kg/m. Builders hardware:- Standard locking device for shutters.

(a) All aluminium sections including glazing clips, snap beading, joining cleats, rubber packing, screws etc., as required are deemed to be included in the rate quoted.

(b) Tinted glass, 5mm thick fixed with glazing cilps and aluminium alloy wire cloth, 0.45mm nominal dia of wire and average width of aperture 1.40mm as required are deemed to be included in the quoted rate.

(c) The fixtures given are for window unit of area exceeding 1 sqm but not exceeding 2 sqm.

Powder coated, anodised aluminium ventilators all as given here-in-after complete all as specified and as directed. Frame:- Louvered section shall be of weight not less than 0.480 kg/m. Shutter:- Gauzed shutter of sections (stiles and rails) shall be of weight not less than 0.480 kg/m.

(a) All aluminium sections including glazing clips, snap beading, joining cleats, rubber packing, screws etc., as required are deemed to be included in the rate quoted.

(b) Frosted glass, 5mm thick fixed with glazing cilps and aluminium alloy wire cloth, 0.45mm nominal dia of wire and average width of aperture 1.40mm as required are deemed to be included in the quoted rate.

(c) The fixtures given are for window unit of area not exceeding 1 sqm overall for both louvered and gauzed portion.

Aluminium designer curtain rods (draw berms rod) exterior grade 3mm thick with holding clamps and fixed to wall with rawl plugs and brass screw including dismantling existing curtain rod including brackets any type complete all as specified and as directed.

Aluminium designer curtain rods brackets suitable for rods as described above complete all as specified and as directed.

Plain cement concrete 75mm thick, 1:3:6, type C1, using 20mm graded stone aggregate as in plinth protection / foot path / hardstanding, surface finished fair and even complete all as specified and as directed.

Machine cut, polished, kota stone slab flooring as in staircase treads, landing etc., 20-25mm thick laid over cement screed base in CM 1:3, 20mm thick, laid and jointed with grey cement slurry at the rate of 4 kg per sqm, mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and as directed.

Machine cut, polished, kota stone slab flooring as in risers of steps. skirting, dado and pillar , 20-25mm thick laid over cement screed backing coat in CM 1:3, 20mm thick, laid and jointed with grey cement slurry, mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and as directed.

Granite (of any type) work, of thickness 18mm to 20mm, (table rubbed and polished) in wash basin platforms, cooking platforms, steps, jambs, pillars, windows and the like set in cement mortar 1:4, 20mm thick, including pointing in white cement 1:2 using marble dust with admixture of pigment to match the shade of granite stone complete all as specified and as directed.

Rounding to edges of stone slabs one edge, such as in steps, cooking platform and other similar situation complete all as specified and as directed.

Glazed ceramic tiles coloured of size 350mm x 250mm / 450mm x 350mm, minimum 7mm thick in vertical surfaces such as skirting, dados, risers etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match including a backing coat of cement mortar 1:3. 10mm thick complete all as specified and as directed.

Non-skid ceramic coloured tiles, minimum 7mm thick (square / rectangular) area of each tile exceeding 0.06 sqm but not exceeeding 0.11 sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match of superior finish, grade B1 quality over cement screed 1:4, 20mm thick applied with cement slurry at the rate of 3 kg / sqm complete all as specified and as directed.

Non-skid ceramic coloured tiles, minimum 7mm thick (square / rectangular) area of each tile exceeding 0.11 sqm but not exceeeding 0.18 sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match of superior finish, grade B1 quality over cement screed 1:4, 20mm thick applied with cement slurry at the rate of 3 kg / sqm complete all as specified and as directed.

Non-skid ceramic coloured tiles, minimum 7mm thick (square / rectangular) area of each tile exceeding 0.11 sqm but not exceeeding 0.18 sqm, in vertical surfaces such as skirting, dados, risers etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match including a backing coat of cement mortar 1:3. 10mm thick complete all as specified and as directed.

Vitrified ceramic coloured tiles, light shade, 10mm thick (square / rectangular) polished, area of each tile not exceeding 0.36 sqm in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match over cement screed 1:4, 20mm thick applied with cement slurry at the rate of 3 kg / sqm complete all as specified and as directed.

Vitrified ceramic coloured tiles, light shade, 10mm thick (square / rectangular) polished, area of each tile not exceeding 0.36 sqm, in vertical surfaces such as skirting, dados, risers etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match including a backing coat of cement mortar 1:3. 10mm thick complete all as specified and as directed.

Rendering 5mm thick in CM(1:3) on fair faces of concrete surfaces as in ceiling finished fair and even complete all as specified and as directed.

Rendering 5mm thick in CM(1:3) on fair faces of concrete surfaces as in fins, fascias finished fair and even complete all as specified and as directed.

Rendering 10mm thick in CM(1:6) on fair faces of brickwork or concrete surfaces finished even and smooth without using extra cement complete all as specified and as directed.

Rendering 10mm thick in CM(1:6) with a top coat of rendering 5mm thick in CM(1:4) mixed with liquid water proofing compound on fair faces of brickwork or concrete surfaces finished even and smooth without using extra cement complete all as specified and as directed.

Rendering 10mm thick in CM(1:4) mixed with liquid water proofing compound on fair faces of concrete surfaces as on top of chajjas finished fair and even cement complete all as specified and as directed.

Coving on junction of chajja to wall 75mm wide.in in CM(1:4) complete all as specified and as directed.

Preparing newly plastered surfaces of wall and applying three coats of white wash on plastered wall surfaces including in narrow widths, bands, cornices, pilasters etc., complete all as specified and as directed.

Preparing newly plastered surfaces of ceiling and applying three coats of white wash on plastered ceiling surfaces including in narrow widths, bands, cornices, pilasters etc., complete all as specified and as directed.

Preparing newly plastered surfaces of wall and applying two coats of weather proof paint over a coat of primer to match with the existing adjoining surfaces including in narrow widths, bands, cornices, pilasters etc., complete all as specified and as directed

Complete removal of existing treatment from wall surfaces, and applying two coats of weather proof paint over a coat of primer to match with the existing adjoining surfaces including in narrow widths, bands, cornices, pilasters etc., complete all as specified and as directed

Preparing old plastered surfaces of wall and applying two coats of white wash on plastered wall surfaces including in narrow widths, bands, cornices, pilasters etc., complete all as specified and as directed.

Preparing old plastered surfaces of ceiling and applying one coat of white wash on plastered ceiling surfaces including in narrow widths, bands, cornices, pilasters etc., complete all as specified and as directed.

Complete removal of existing treatment from wall surfaces, and applying two coats of distemper oil emulsion white or tinted including in narrow widths, bands, cornices, pilasters etc., over a coat of alkali resistant priming paint , complete all as specified and as directed

Preparing newly plastered surfaces of wall, applying two coats of distemper oil emulsion white or tinted including in narrow widths, bands, cornices, pilasters etc., over a coat of alkali resistant priming paint complete all as specified and as directed

Wall care putty 3mm thick on walls complete all as specified and as directed.

French polishing on surfaces of any description, width or girth including cleaning and preparing the surface including a coat of wood filler on new works with two or more coats complete all as specified and as directed.

Preparing new surfaces of wood and wood based materials of any description, not otherwise described, over 10cm in width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed.

Preparing old painted surfaces of wood and wood based materials of any description, not otherwise described, over 10cm in width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed.

Preparing surfaces of wood and wood based materials, steel and iron work, new or old, as in ends of posts, backs of chowkats etc., area exceeding 0.10 sqm but not exceeding 0.50 sqm each and treated with tar or coal tar black paint and sanding complete all as specified and as directed.

Preparing surfaces of wood and wood based materials, steel and iron work, new or old, as in small articles such as stop, covers, gully gratings, hold fasts etc., , area not exceeding 0.10 sqm each and treated with tar or coal tar black paint and sanding complete all as specified and as directed.

Preparing new surfaces of steel and iron surfaces of any description, not otherwise described, over 10cm in width or girth and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and as directed.

Preparing old painted surfaces of steel and iron surfaces of any description, not otherwise described, over 10cm in width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed.

CPVC pipes SDR 11 and plain CPVC SDR 11 fittings on walls/ceiling or laying in floors outer diameter 16mm complete all as specified and as directed.

CPVC pipes SDR 11 and plain CPVC SDR 11 fittings on walls/ceiling or laying in floors outer diameter 20mm complete all as specified and as directed.

Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) , three layered hoisted and fixed in position all as specified in SSR Part-I of capacity 1000 litres complete all as specified and as directed.

Ball valves high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed (minimum weight 25mm-455gms) bore of pipe 25mm as in repairs complete all as specified and as directed.

Gun metal, globe or gate valves, with iron wheel head screwed both ends for iron pipe and fixed of bore of pipe 20mm as in repairs complete all as specified and as directed.

PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors of bore 110mm as in repairs complete all as specified and as directed.

PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls of bore 75mm as in repairs complete all as specified and as directed.

PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls of bore 110mm as in repairs complete all as specified and as directed.

PVC (SWR) bend any radius of bore 110mm with access door complete all as specified and as directed.

PVC (SWR) bend any radius of bore 75mm with access door complete all as specified and as directed.

PVC (SWR) branch piece single, (Single Y) equal or unequal of bore 110mm with access door complete all as specified and as directed.

PVC (SWR) branch piece single, (Single Y) equal or unequal of bore 75mm with access door complete all as specified and as directed.

PVC (SWR) vent cowl of bore 110mm complete all as specified and as directed.

PVC (SWR) vent cowl of bore 75mm complete all as specified and as directed.

Grating square fitting of size 150mm made in two parts for smell and mosquito proofing with minimum 25 mm water seal of PTMT. (Minimum weight 85gms) as in repairs complete all as specified and as directed.

Vitreous china wash down water closet pan (pedestal pattern) white (excluding flushing cistern and flush pipe) and including fixing of the following components viz. pedestal pan with "P" or "S" trap, seat and cover for pedestal pan, flushing cistern, brackets, chain and pull or lever handle, flushing pipe including jointing to socket of flushing rim and connecting pipe to union of flushing cistern, inlet and overflow pipe, anti-syphonage pipe or stopper fixed as in repairs complete all as specified and as directed.

Flushing cistern, flush pipe, seat cover, P trap, WC connector, as required shall be measured and paid for under supply only separately.

Vitreous china squatting pan, "Orissa" pattern, size 580mm x 440mm white, with integral foot rests (excluding flushing cistern and flush pipe) and including fixing of the following components viz. squatt pattern pan with loose cast iron or vitreous chinaware, "P" or "S" trap, seat, flushing cistern, brackets, chain and pull or lever handle, flushing pipe including jointing to socket of flushing rim and connecting pipe to union of flushing cistern, inlet and overflow pipe, anti-syphonage pipe or stopper, setting the trap in and pan in lime concrete, 150mm minimum thickness and finished just below level of rim of pan to receive floor finishing as in repairs complete all as specified and as directed.

Flushing cistern and flush pipe as required shall be measured and paid for under supply only separately.

Supply only PVC valveless, syphonic action type flushing cistern 10 litres capacity low level, white with inlet, ball valve, float and handle / push button, including brackets complete all as specified and as directed.

Supply only flush pipe of polyethylene of high density, 32mm dia for low level / high level flushing cistern complete all as specified and as directed.

PVC connections 15mm size with PTMT nuts of length 600mm as in repairs complete all as specified and as directed.

Supply only of plastic water closet seat, black, closed pattern with flat bottom and cover and mild steel chromium plated or aluminised hinging device complete all as specified and as directed.

Vitreous china wash basin, white, flat back, size 580mm x 450mm excluding taps, waste fitting, but including brackets and including fixing of the following components viz. pillar taps, waste fittings and union, plugs and chains and connecting upto supply pipes, wastes or traps, screws, plugs, cement mortar and other subsidary materials required for fixing including cutting for and pinning in ends of brackets but exclusive of fixing of supply and waste pipe as in repairs complete all as specified and as directed.

(a) Pillar taps and waste fittings as required shall be measured and paid for under supply only separately.

(b) Supply and waste pipes as required shall be measured and paid for separately.

Supply only Pillar taps, cast copper alloy, with capstan heads, chromium plated, fancy type, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed of bore of pipe 15mm complete all as specified and as directed.

Make shall be of Parryware Cat No.G0202A1 or equivalent of makes listed here-in-after.

Supply only waste fittings, brass, chromium plated for glazed ware basins etc., with long screwed shanks and fly nuts, flange end bedded in red lead cement and other end fixed of bore of pipe 32mm complete all as specified and as directed.

PVC waste pipes, 32mm bore of pipe, with polyethylene thread union and check nuts, fixed to walls as in waste pipe in wash basin as in repairs complete all as specified and as directed.

Make shall be of Prayag Cat No.327 or equivalent of makes listed here-in-after.

PVC connections 15mm size with PTMT nuts of length 450mm as in repairs complete all as specified and as directed.

Wall mixer brass, fancy type, chromium plated, 2-in-1, for mixing of hot and cold water screwed for iron pipe. bore of pipe 15mm as in repairs complete all as specified and as directed.

Make shall be of Jaquar Cat No.CON-273 or equivalent of makes listed here-in-after.

Health faucet, chromium plated, 2 in 1, suitable for 15mm bore of pipe with CP pipe length 1500mm, wall hook, water shower gun, washers, connections, brass union etc., as in repairs complete all as specified and as directed.

Make shall be of Parryware Cat No.T9962A1 or equivalent of makes listed here-in-after.

Toilet cabinet PTMT fancy type of size 450mm x 555mm with sliding shelf assembly, mirror mounted as shutter as in repairs complete all as specified and as directed.

Toilet paper holder with flab, recessed type, matt chromium plated, fixed to walls with chromium plated brass screws complete all as specified and as directed.

Make shall be of Parryware Cat No. T6514A1 or equivalent of makes listed here-in-after.

Soap dish, matt finish chromium plated (MCH / Colour CP), fixed to walls with chromium plated brass screws complete all as specified and as directed.

Make shall be of Parryware Cat No. T6403A1 or equivalent of makes listed here-in-after.

Glass shelf including bracket and fittings, matt finish chromium plated (MCH / Colour CP), fixed to walls with chromium plated brass screws complete all as specified and as directed.

Make shall be of Parryware Cat No. T6703A1 or equivalent of makes listed here-in-after.

Corner glass shelf including bracket and fittings, matt finish chromium plated (MCH / Colour CP), fixed to walls with chromium plated brass screws complete all as specified and as directed.

Make shall be of Jaquar Cat No. 1173 or equivalent of makes listed here-in-after.

Bib taps, with wall flange, cast copper alloy, chromium plated, screwed down, screwed both ends for iron pipe or for brass ferrule and fixed of bore of pipe 15mm as in repairs complete all as specified and as directed.

Make shall be of Parryware Cat No.G0204A1 or equivalent of makes listed here-in-after.

Angle valves, cast copper alloy, screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions of bore of pipe 15mm as in repairs complete all as specified and as directed.

Make shall be of Parryware Cat No.T99604A1 or equivalent of makes listed here-in-after.

Stop cock / flush cock , concealed, cast copper alloy, chromium plated, screwed down, screwed both ends for iron pipe or for brass ferrule and fixed of bore of pipe 15mm as in repairs complete all as specified and as directed.

Make shall be of Parryware Cat No.T4540A1 or equivalent of makes listed here-in-after.

Shower rose, overhead, with arm and wall flange, chromium plated, screwed down, screwed both ends for iron pipe of bore of pipe 15mm as in repairs complete all as specified and as directed.

Make shall be of Parryware Cat No.T9927A1 or equivalent of makes listed here-in-after.

Stainless steel towel rail, 20mm dia, D type, 600mm long between flanges fixed with and including chromium plated brass screws as in repairs complete all as specified and as directed.

Make shall be of Parryware Cat No.T6001A1 or equivalent of makes listed here-in-after.

Stainless steel towel ring, (minimum weight 90 gms) with and including chromium plated brass screws and wooden and plastic cleats complete all as specified and as directed.

Make shall be of Parryware Cat No.T6002A1 or equivalent of makes listed here-in-after.

Stainless steel peg set of six complete all as specified and as directed.

Stainless steel sink without drainage board, 1mm thick, for kitchen, with plugs, waste pipe, waste fittings, washers, including bedding in cement mortar 1:4 on dwarf walls or fixing on and including cantilever cast iron brackets, connecting union to pipe etc., overall size 600mm x 450mm with bowl size 550mm x 400mm x 200mm as in repairs complete all as specified and as directed.

Stainless steel rack kitchen plate rack size 910mm x 780mm x 250mm, with separators and 3 tier shelves, provision of hook 9 Nos made of stainless steel of grade AI SI 304, fixed with screws and necessary fittings including making holes to fix to walls as in repairs complete all as specified and as directed.

Make shall be of Prayag Cat No.P-348 or equivalent of makes listed here-in-after.

SCH "A" PART-II (INTERNAL ELECTRIFICATION)

Taking down carefully unserviceable point wiring copper / aluminium (light, fan, socket or power) complete, including removal of batten / conduit / gutties / wooden board etc., including fittings and fixtures such as switches, ceiling roses, regulators, sockets, light fittings, etc., and separating the serviceable items for reuse, removal from site under Sch of credit and removal of unserviceable items out of site and making good the disturbed surfaces of walls, ceilings etc., complete all as specified and as directed.

Taking down carefully unserviceable sub main wiring aluminium conductor cables any number of runs of any cross section complete, including removal of batten / conduit and separating the serviceable items for reuse, removal from site under Sch of credit and removal of unserviceable items out of site and making good the disturbed surfaces of walls, ceilings etc., complete all as specified and as directed.

Point wiring on stone / brick masonry wall complete with two 1.5 sqmm single core PVC insulated 1100 volts grade unsheathed FRLS cable confirming to IS-694, 1977 with multistranded copper conductor, drawn through and including non-metalic rigid PVC conduit, conduit fittings and conduit accessories not less than 20 mm dia concealed in walls and fixed with suitable clamps on ceiling etc., and including provision of one 1.5 sqmm PVC insulated single core FRLS multistranded copper conductor green in colour as earth continuity conductor and connected to common earth dolly, including pressed steel terminal boxes made out of 1.6 mm thick mild steel sheet, 60mm deep, concealed in walls, duly painted with two coats of anti-corrosive over a coat of red oxide zinc chrome primer and covered with bakelite hylam sheet cover 3mm thick fixed with cadmium plated screws for housing the switches, socket outlets, fan regulators etc., complete all as specified and as directed for one light point controlled by one switch.

Cost of terminal box and cutting chases for concealing pipes is deemed to be included in the item rates quoted for point wiring.

All as per Sl Item No.1(a) here-in-before but for one light point controlled by two two-way switches.

Cost of terminal box and cutting chases for concealing pipes is deemed to be included in the item rates quoted for point wiring.

All as per Sl Item No.1(a) here-in-before but for one fan point controlled by one switch and regulator

Cost of terminal box and cutting chases for concealing pipes is deemed to be included in the item rates quoted for point wiring.

All as per Sl Item No.1(a) here-in-before but for one exhaust fan point controlled by one switch.

Cost of terminal box and cutting chases for concealing pipes is deemed to be included in the item rates quoted for point wiring.

All as per Sl Item No.1(a) here-in-before but for One bell / buzzer point controlled by one bell push

Cost of terminal box and cutting chases for concealing pipes is deemed to be included in the item rates quoted for point wiring.

All as per Sl Item No.1(a) here-in-before but for One switch socket outlet point 3 pin 5 Amps on same board with other switches.

Cost of terminal box and cutting chases for concealing pipes is deemed to be included in the item rates quoted for point wiring.

All as per Sl Item No.1(a) here-in-before but for One switch socket outlet point 3 pin 5 Amps on independent board.

Cost of terminal box and cutting chases for concealing pipes is deemed to be included in the item rates quoted for point wiring.

All as per Sl Item No.1(a) here-in-before but for point wiring with two 2.5 sqmm single core copper conductor multistranded cable and one 2.5 sqmm PVC insulated single core multistranded cable as earth continuity conductor green in colour for one 3 pin switch socket outlet, 15 Amps, on independent board complete all as specified and as directed.

Cost of terminal box and cutting chases for concealing pipes is deemed to be included in the item rates quoted for point wiring.

All as per Sl Item No.1(a) here-in-before but for point wiring with two 4.0 sqmm single core copper conductor multistranded cable and one 4.0 sqmm PVC insulated single core multistranded cable as earth continuity conductor green in colour for one 3 pin switch socket outlet, 15 Amps, on independent board complete all as specified and as directed.

Cost of terminal box and cutting chases for concealing pipes is deemed to be included in the item rates quoted for point wiring.

Switch piano, flush type single pole, one way, 5 Amps complete all as specified and as directed.

Switch piano, flush type single pole, two way, 5 Amps complete all as specified and as directed.

Bell push, flush type, 5 Amps complete all as specified and as directed.

Switch socket combination, flush type, 2 in 1, 3 pin, 5 Amps universal type complete all as specified and as directed.

Switch socket combination, flush type, 2 in 1, 3 pin, 5 Amps and 15 Amps universal type complete all as specified and as directed.

Ceiling rose, 3 terminal, PVC / polycarbonate, insulated body complete as specified and as directed.

Stepped type electronic fan regulator, 300 W, flush type, including fixing on existing laminated sheet complete as specified and as directed.

Bell, ding dong type, AC, 230 Volts, single pole complete all as specified and as directed.

Isolator 100 Amps, TPN, 415 Volts, 50 Hz, AC supply,with breaking capacity of 10 kA complete all as specified and as directed.

Isolator 63 Amps, SPN, 240 Volts, 50 Hz, AC supply,with breaking capacity of 10 kA complete all as specified and as directed.

MCB 6-32 Amps, SP, 240 Volts, 50 Hz, AC supply, "B" curve, with breaking capacity of 10 kA complete all as specified and as directed.

Taking down existing exhaust fan any sweep and provision of exhaust fan, heavy duty, 300mm sweep, 900 RPM, with louvers, dynamically balanced metal body (vibration free silent operation) conforming to IS-2312-1967, AC single phase, 240 Volts, 50 Hz and connecting including provision of two way PVC connectors, 1 sqmm flexible three core multistranded copper conductor cable from ceiling rose or connector to fan including earthing and writing MES No.20mm height with synthetic enamel paint black complete all as specified and as directed.

(a) Make shall be of Havells Cat No. Turbo Force SP series or equivalent of makes as listed here-in-after.

(b) The old exhaust fan shall be deposited in the MES store yard of AGE E/M Chennai.

Taking down exhaust fan any sweep, dismantling and opening up, replacing bearings, bushes, condensors of same existing type and capacity, assembling back, painting of ceiling fans complete, in situ with synthetic enamel paint by spraying including filling cavities with filler, coat after cleaning all dust etc., testing and writing MES No.20mm height with synthetic enamel paint black complete all as specified and as directed.

Taking down ceiling fan any sweep, dismantling and opening up, replacing bearings, bushes, condensors of same existing type and capacity, assembling back, painting of ceiling fans complete, in situ with synthetic enamel paint by spraying including filling cavities with filler, coat after cleaning all dust etc., testing and writing MES No.20mm height with synthetic enamel paint black complete all as specified and as directed.

Hanging only repaired ceiling fam 1200mm / 1400mm sweep complete with all accessories and connecting including 1.5 sqmm flexible three core multistranded copper conductor cable from ceiling rose or connector to fan including earthing complete all as specified and as directed.

Fixing only repaired exhaust fan any sweep complete with all accessories and connecting including 1.5 sqmm flexible three core multistranded copper conductor cable from ceiling rose or connector to fan including earthing complete all as specified and as directed.

Surface and wall mounted LED tube light fitting, 22 W, batten type,with aluminium housing and integrated electronic driver complete with all accessories , suitable for operation on AC, single phase 220 / 230 Volts , 50 Hz supply, and including connecting up with PVC sheathed 1.5 sqmm 3 core copper conductor flexible wire from ceiling rose to fitting with the following parameters,complete all as specified and as directed.

(a) Make shall be Havells Cat No. LUMILINEPLUSBS22WLED865SPCSS or equivalent of makes as listed here-in-after.

(b) For all other mandatory requirements of LED fittings, please refer PS Clause No.24.21 on Sl Page No.195

Surface and wall mounted LED tube light fitting, 10 W, batten type,with aluminium housing and integrated electronic driver complete with all accessories , suitable for operation on AC, single phase 220 / 230 Volts , 50 Hz supply, and including connecting up with PVC sheathed 1.5 sqmm 3 core copper conductor flexible wire from ceiling rose to fitting with the following parameters,complete all as specified and as directed.

(a) Make shall be Havells Cat No. LUMILINEPLUSBS10WLED865SPCSS or equivalent of makes as listed here-in-after.

(b) For all other mandatory requirements of LED fittings, please refer PS Clause No.24.21 on Sl Page No.195

Surface mounted downlight with white powder coated polycarbonate housing and pressure die-cast heat sink with white reflecter etc complete pre wired and including lamp and including connecting up with PVC sheathed 1.5 sqmm 3 core copper conductor flexible wire from ceiling rose to fitting with the following parameters,complete all as specified and as directed.

(a) Make shall be Havells Cat No. INTEGRANEOSURFACEDLS15WLED840S or equivalent of makes as listed here-in-after.

(b) For all other mandatory requirements of LED fittings, please refer PS Clause No.24.21 on Sl Page No.195

Surface mounted, decorative oval bulk head edge-lit LED luminaire comprising of high brightness LEDs, 230 V, pre wired including connecting up with PVC sheathed 1.5 sqmm 3 core copper conductor flexible wire complete all as specified and as directed.

(a) Make shall be Havells Cat No. RUGBYNEONFT10WLED860SSYMTOPC or equivalent of makes as listed here-in-after.

(b) For all other mandatory requirements of LED fittings, please refer PS Clause No.24.21 on Sl Page No.195

Power / Sub-main wiring with PVC insulated unsheathed, 1100 volts, grade multistranded copper conductor, two runs of single core 4 sqmm conforming to IS-694, drawn through and including suitable dia rigid PVC conduit, conduit fittings and conduit accessories alongwith one run 4 sqmm PVC insulated single core multistranded copper conductor cable (green) as earth continuity conductor concealed in walls and connecting to common earth dolly complete all as specified and as directed.

(a) Two runs of 4 sqmm cable and one run of 4 sqmm cable and one run of conduit will be measured as one length.

(b) Cutting chases on walls for concealing pipes and cost of terminal box is deemed to be included in the item rates quoted for sub-main wiring / circuit wiring.

Power / Sub-main wiring with PVC insulated unsheathed, 1100 volts, grade multistranded copper conductor, two runs of single core 6 sqmm conforming to IS-694, drawn through and including suitable dia rigid PVC conduit, conduit fittings and conduit accessories alongwith one run 6 sqmm PVC insulated single core multistranded copper conductor cable (green) as earth continuity conductor concealed in walls and fixed with suitable clamps on ceiling / roof trusses etc. and connecting to common earth dolly complete all as specified and as directed.

(a) Two runs of 6 sqmm cable and one run of 6 sqmm cable and one run of conduit will be measured as one length.

(b) Cutting chases on walls for concealing pipes and cost of terminal box is deemed to be included in the item rates quoted for sub-main wiring / circuit wiring.

Taking down MCB DB including inner components and provision of MCB DB SPN 8 way, double door, CRCA sheet, powder coated with high quality weather proof paint, 240 volts, AC, 50Hz, with tinned copper bus bar of 200 Amps capacity, neutral link, earth link and connecting up complete all as specified and as directed.

Sheet metal enclosures with socket plug top and MCBs, single pole and neutral with two pin and earth plug and socket complete one single pole MCB 20 Amps, 10 kA, "C" Curve, 240 V complete all as specified and as directed.

Note:- Make shall be of Legrand Cat No.6078 41 for DB and No. 6032 35 for MCBs or equivalent of makes as listed here-in-after.

SREE BALAJI ENTERPRISES

lakshmibuilders

SRI LAKSHMI ASSOCIATES

G.JANAKIRAMAN CO