Repairing works of Mango Ward No-10, Refugee Colony Samudayik Bhawan.

Dismantling old plaster and pointing in cement or lime and raking out joints to 15mm. depth, watering and disposal of unserviceable materials with all leads all complete as per direction of E/I.

Providig 0'½" thick Cement Plaster. in C.M. (1:4) -do- -do- all complete job as per specification and direction of E/I.

Providing and laying 6mm precast white glazed tiles in walls over 12mm cement motar (1:3)and joined with grey cement slurry with "A"grade white 15 X15cm tiles.

providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.

Finishing with Deluxe Multi Surface paint system for interiors and exteriors using primer as per manufacturers specification, Two or more coats applied on wall @ 1.25 ltr/10 sqm over and including one coat of special primer applied @ 0.75 ltr/10 sqm.

Providing designation 75A one brick flat soling joints filled with local sand including cost of watering taxes royalty all complete as per building specification and direction of E/I.

Providing corrugated blue profile sheet roofing fixed with G.I.J. or hooks, bolts and nuts 8 mm diameter with bitumen and G. I. limpet washers or with G.I. limpet washers filled with white lead and including a coat of approved steel primer and two coats of approved paint on over lapping of sheets complete (up to a pitch of 60°) excluding the cost or purlins, rafters and trusses 0.5mm thick with zinc coating not less than 275 gm/sqm. For blue profile sheet Roof + Ridge including all materials, T&P for completion of work etc.

providing grilled rolling shutters manufactured out of 8 mm dia M.S. bar instead of laths as per design approved by Engineer-in- charge,

Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge. (Cost of aluminium snap beading shall be paid in basic item):

S/F/F M.S Grill gate with M.S grill Made of 20 x 6mm M.S flats and fixing or 16mm M.S square bars fitted on 25 x 25 x 6mm Angle fram -------------- do ---------- all complete as per specification and direction of E/I.