REPAIR TO HARDSTANDING

Amount

Taking down cement plaster on brick Walls built in cement mortar including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and as directed.

Rendering 15mm thick in cement mortar 1:4 including mixing of liquid water liquid water proofing compound of approved make as per manufacturer's instructions on fair faces of brick work or concrete surfaces or in chajjas / parapet walls etc finished even and fair including fixing of chicken wire mesh where directed complete all as specified and as directed. Note : WPC and chicken wire mesh will be measured and paid separately.

Supply only liquid water proofing compound all as specified and as directed.

Preparation of new plastered surface of walls and applying two coats of cement based paint over one coat of alkali resistant cement priming paint over and including 1 to 1.5mm thick wall care putty complete all as specified and as directed.

Material and Labour for providing Cement concrete (1:2:4) (using 12.5mm stone graded aggregate) as in benching of surface channels and drains all as specified and directed.

Material and Labour continuous brick edging with old sized bricks with width equal to the length of the brick; of whole burnt bricks, laid dryon edge and jointed in CM 1:6 for drains or in any other situation and without any sand cushioning etc complete all as specfied and as directed.

Material and Labour for brick work in using sub class 'B' old size bricks, laid flat on sloped sides of drains or in any other situation jointed in CM 1:6 without any bedding surface and flush pointing in CM 1:3 complete all as specified and as directed.

Material and Labour for flush pointing to brick tiles facing with tiles laid flat in stretcher course in CM 1:3 including raking out joints/pointing to brick tiles, laid flat in floor, surface channel roof, etc built in Cement Mortar all as specified and as directed.

Extra for forming fair finish to drain or channel upto 30 cm inner girth in cement concrete using extra cement, including forms, mounds , mitred/stopped and etc.all as specified and as directed

Extra for forming fair finish to drain or channel over 30 cm inner girth in cement concrete, using extra cement including forms, mounds mitred/stopped and etc. all as specified and as directed

Material and Labour for precast cement concrete (1:2:4), norminal mix, type B-1 using 20 mm graded stone aggregate as in cover slab of drain set in cm 1:4 complete all as specified and as directed.

Demolition of cement concrete un-reinforced in ground floors and pavings n.exc 15cm thickness complete all as specified and as directed.

Demolition of brick work or stone/boulder masonary built in cement mortar including all quoins,arches,pillars etc complete all as specified and as directed.

Brick work with sub class 'B' bricks straight or curved on plan exceeding 6m mean radius built in CM 1:6 complete all as specified and as directed.

50mm thick plain Cement concrete (1:2:4) type B-1 using 20 mm graded stone aggregate as in flooring laid in alternate bays including form work as applicable complete all as specified and as directed.

100mm thick PCC 1:4:8 type D-2 using 40mm graded stone aggretgate, as in sub base of flooring/ hard standing complete all as specified and as directed.

100mm thick PCC 1:3:6 type C-2 using 40mm graded stone aggretgate, as in sub base of flooring/ hard standing complete all as specified and as directed.

Material and labour for forming expansion joints 12mm thick filled with preformed bitumenous filler and top 30mm primed and sealed with sealing compound grade 'B' for concrete slab 100mm thick complete all as specified and as directed.

Material and labour for providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed in cement mortar 1:3 including making joints with or without grooves (thickness of joint except at sharp curves shall not be more than 5mm) including making drainage opening where ever required including two coats of painting with synthetic enamel paint over a coat of primer including preparation of new concrete surfaces complete all as directed.

Material and labour Plain Cement concrete (1:2:4) type B-1 using 20 mm graded stone aggregate as in cills, benching and similar bands, plinth courses, parapets, coping, bed plates including weathering, slightly rounde or chamfered angles and thorting including form work as applicable complete all as directed.

Material & Labour for machine pressed rubber moulded ISI marked precast cement concrete interlocking paver block with grey cement and no pigment any shape and size conforming to IS : 15658-2006 of 60 mm thickness, M-30 grade with 6mm top layer of anti abrasive material, including filling of interstices with fine sand laid over and including 25 mm thick (compacted) fine sieved sand cushioning of size and shape as decided by GE complete all as specified and as directed.

Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and as directed.

Material and Labour for Mild steel TMT bars 10mm dia and over as in reinforcement cut to length bent to shape required including cranking, hooking ends and binding with mild steel wire (annealed) not less than 0.90 mm dia, complete all as specified and as directed.

S M BUILDERS