CA NO. GE (I) (AF)/SHL/ OF 2021-22 PROVN OF PLATFORM FOR MOUNTING OF AIRCRAFT, PROVN OF WORK SERVICES FOR NFS INFRASTRUCTUTRE (PHASE-II) AT 792SU, PROVN OF LANDING T STEEL FOR ATC AT ALG, PROVN OF EXHAUST FANS AND ADDN/ALTN TO ARJAN HALL IN COMMAND

Amount

Note : All unserviceable materials obtained out of demolition/dismantling/taking down (other than those for which credit catered under Schedule of credit) shall be disposed of outside MoD Land. Quoted rates against respective item shall deemed to include for same.

B/R ITEMS Taking down chowkats with shutters (without taking off shutters from the frames) & removing from site area n.exc 1.5 Sqm each complete all as specified and directed.

Taking down chowkats with shutters (without taking off shutters from the frames) & removing from site area exc 1.5 Sqm & n. exc 4.00 sqm each complete all as specified and directed.

Taking down cement or cement lime plaster any description, on brick or stone walls, etc. including raking out joints, hacking for key & scrubbing down with water, etc. & removing rubbish off the premises, complete all as directed.

Surface excavation not exceeding 30 cm deep and averaging 15 cm deep and getting out in soft/loosed soil complete all as specified and directed. (72+160+100+38)

Rough excavation not exceeding 1.5 m deep and getting out in soft/loose soil, complete all as specified and directed.

Excavation over areas n. exc 1.5 mtr deep in soft/loose soil and getting out complete all as specified and directed. (26.00+39.00)

Excavation over areas exc 1.5 mtr but n. exc 3.0 mtr deep in soft/loose soil and getting out complete all as specified and directed.

Excavation in trenches n exc 1.5 mtr wide and n exc 1.5 meter in depth for foundation, laying of cable, pole etc or for shafts, wells, cesspits, manholes, pier holes etc not exc 10 sqm on plan and getting out in soft/loose soil complete all as directed.

Excavation in post holes (or similar holes) in soft/loose soil, each n.exc 0.5 cum, getting out, returning, filling in and ramming moorum or broken rubble mixed with moorum in layers n.exc 25cm around foundation concrete as ordered, watering and removing surplus soil to a distance not exceeding 50 m and making good surface, complete all as specified and directed.

Returning filling in including spreading, levelling, watering and well ramming in layers not exceeding 25cm thick,complete, all as specified and directed. (15.00+11.00)

Removal of excavated surplus soil to a distance n.exc 50m and depositing where directed at level not exceeding 1.5 m above the starting point,complete, all as specified and directed . (16.00+25.00+4+16+5.7)

M & L for hard core of broken stone or boulders of gauge n.exc 63 mm, deposited, spread & levelled in layers n.exc 15 cm thick watered & rammed to true surface complete all as specified and directed. (10.8+16+13+5.7)

M & L for PCC 1:4:8 type D-2 using 40mm graded stone aggregate as in foundation, filling and mass concrete complete all as specified and directed. (1.76+15.00+13+3)

M & L for PCC 1:3:6 type C-2 using 40mm graded stone aggregate as in foundation, filling and mass concrete complete all as specified and directed.

M & L for Walling of random rubble uncoursed well bonded, bedded & solidly hearted built in cement mortar 1:6 complete all as specified and directed. (Note : Volume occupied by PCC bond stone shall not be measured against this item. Volume occupied by PCC bond stone shall be measured and under respective item here-in-after.)

M & L for precast cement concrete type C-1, 1:3:6 using 20mm graded aggregate as in bond stones set and jointed in cement mortar 1:4 complete all as specified and as directed.

M & L for PCC in 1:3:6 type C-2 (using 40mm graded mechanically crushed stone aggregate) 75 mm thick as in plinth protection, laid in alternate bays etc finished even and fair and joints filled with bitumen and sand mixture applied hot complete all as specified.

M&L for pre-cast cement concrete block masonry 1:3:6 Type C-1 using 20mm graded stone aggregate with solid blocks, 10 cm thick and setting in cement mortar 1:4, complete all as specified and directed. (6.8+2.0+20)

M & L for precast cement concrete block masonary with solid block 1:3:6 type C1 (using 20 mm graded agg) exc 10 Cm in width and setting in cement mortar 1:6 complete all as specified.

M & L for providing cement concrete 1:2:4 type B-2 using 40 mm graded stone aggregate as in surface channels and drains and benching including use and waste of formwork where necessary and finishing the exposed top surface of concrete even and smooth using extra cement complete all as specified and directed.

M&L for cement concrete type B1, 1:2:4 (using 20 mm graded stone aggregate) as in lintels upto 1.5m clear span, steps, seismic and other similar bands copping/cills, bed block for embedding hold fast etc including necessary form work weathering, slightly rounded or chamfered angles and throating complete all as directed .

M & L for raised pointing to random or polygonal rubble masonry uncoursed or brought upto courses in CM 1:4 complete all as specified and directed.

Extra over sand stone walling for hammer dressing to face stones and dressing of face beds & joints, as specified, of random rubble walling, uncoursed or brought upto courses with maximum depression on face from straight edge held against the dressed surface not exc 40mm complete all as specified and directed.

Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/stopped ends etc complete all as specified and directed.

M & L for exposed surface finished with spike rolling or making impression of expanded metal, whilst the concrete is green complete all as specified and directed.

M & L Reinforced cement concrete M-25 (design mix) using graded stone aggregate as in foundation including rafters footings foundation beam plinth beam bases for column etc basement slab under reamed piles and mass concrete complete all as specified and directed.

M & L for shifting or lifting of aircraft and hoisted in position with crane of capacity 8 ton and above, including trala for moving or shifting of aircraft for a distance exc 1mtr but n exc 2km and fixing in position as directed by garrision engineer all as specified and directed.

Supply only integral water proofing compound complete all as directed.(3+3+3)

M & L for Use and waste of flat formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams and similar work vertical or to batter for rough finished surfaces of concrete complete all as specified and directed.

M & L for second class hard wrought as in scantling framed and fixed complete all as specified and directed.

M & L for second class hardwood weather boarding, clean sawn, plain, 20 mm thick or feather edged 15 mm to 20 mm thick and fixed with 30 mm laps complete all as specified and directed.

M & L for second class hard wood plain, solid, straight chowkhats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified and directed.

S & F flush shutters, solid core construction with block board core and plywood face panels, commercial type on both sides both face is covered with decorative face veneer with lipping/frame to match 30mm thick complete all as specified and directed.

S & F 100mm long butt hinges, stainless steel & ISI marked complete all as specified and directed.

S & F 300mm long Cast brass Barrel tower bolts, bright finish polished and fixed complete all as specified and directed

S & F brass sliding door bolts 300mm long, with sand or die-cast brass hasp, staple (bolt type) and fixing bolt with rolled or drawn brass bolts complete all as specified and directed.

S & F 150mm size brass handles cast type polished bright fixed with screws complete all as specified and directed.

S & F stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as directed.

M & L for provision of seamless panel false ceiling consisting of GI frame work and other allied works as under:- (a) GI perimeter channel 0.55mm thick with two unequal fianges of 20mm and 30mm and web of 27 mm fixed to surrounding wall using nylon sleevs and screws at 450 mm centre to centre (b) Intermediate channel 0.9mm thick having two equal flanges of 15 mm each and web of 45mm suspended from soffit at approx 900 mm centre to centre with GI cleat and steel expansion fasteners (c) Cross ceiling section (not exc 1.2 m length) of 0.55mm thickness having kurled web of 70mm and flange of 26 mm each with lips of 10.5mm flxed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre (d) Hangers 6mm dia .G.I.(upto 1200mm length ) adjusting level fixed to roof slab by means of ceiling cleats made out of G.I flat 40x3mm size, 60mm long and expension hold fasteners 12.5mm dia 40mm long. (e) Providing and fixing 12mm gypsum board fixed in ceiling with screws as per manufracturer instruction. (f) Preparation of ceiling surfaces and applying two coats of plastic emulsion over a coat of primer over a coat of 1mm thick wallcare putty as per directed by enginner-in-charge. (Note : The work of false ceiling shall be executed all as per manufacturer instrucions)

M & L for filling the gap between gypsum board false ceiling and wall with 100mm white POP cornice complete all as specified and directed.

S & F structural rolled mild steel confirming to Fe-410 W (Gde E-250) quality 'A' for joist, channel, angle, or tee sections, fixed independently, without connecting plates, etc. (cut to ordinary lengths i.e. within 20mm of the length indicated) complete all as specified and directed.(3200+116)

S&F for rolled mild steel sections of Fe-410 W (Gde E-250) quality 'A' as in Compound girders and stanchions, lattice girders, aerial masts, staging for water tanks and the like including caps, bases, splices etc. built up from two or more beam or channel sections or angles with plates, including all lattice bars, stiffeners, gusset plates, etc. including prepration of surfaces and painted with one coat of red oxide zinc chrome primer paint at Contractor’s workshop before fabricationand complete all as specified and directed.

S & F Plates (plain or chequered) channels. Square cut or notched (ordinary and counter sunk) forming holes, without any attachment, conforming to Fe-290 (Gde E-165) complete all as specifed and directed.

S&F mild steel work in tubular trusses, purlins including special shaped washer etc complete using ERW or induction butt welded tubes conforming to IS-1161 grade St-240 including notching, drilling, fitting, riveting and/or welding or connecting with bolts and nuts including rivets or nuts and bolts, providing and fixing cleats, fish plates, gusset plates etc and also for wedging, plumbing, turning up & fixing complete all as specified and directed.

M & L for mild steel work conforming to Fe-290 Gde E-165 as in hold fast of flat iron bands, straps, supports or stays for rain water, ventilating pipes cut to length, bend to shap including bolts if required and wall tie, clamps etc., and including preparing surfaces and treated with tar and sanded with clean sharp sand complete all as specified and directed.

S & F 1.25mm thick mild steel, plain, black sheet in wall cladding,steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. as required complete all as speicified and directed.

S & F for mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, length of bolt exceeding 5cm but not exceeding 10cm long and dia of neck exceeding 11mm but n.exc 15mm complete all as specified and directed.

Material & Labour for providing and fixing stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement. complete all specified and directed.

M & L for TMT bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips, complete all as specified and directed.

S & F 0.71mm thick plain, aluminium sheeting, Alloy 31000 H4 in ridges, hips, valley gutter, drip and straight flashing (length and girth as fixed) complete all as specified and directed.

Supply fabrication and fixing powder coated (Thickness of powder coating not less than 50 micron) anodized aluminium frame for doors, windows, ventilators with one or more rebates including jointing cleats for fixing etc complete all as specified and directed.

Supply fabrication and fixing powder coated (Thickness of powder coating not less than 50 micron) aluminium door shutters, side hung type without sash bars, aluminium section weighing 0.55 Kg/RM including necessary jointing cleats, glazing clips, rubber neoprene packing, powder coated anodised aluminium snap beading, screws, powder coated aluminium fittings, such as handle (01 No for each leaf) etc complete all as specified and directed. (Note :- Glazing/wire mesh shall be measured and paid separately under respective items of Schedule.)

Supply fabrication and fixing powder coated (Thickness of powder coating not less than 50 micron) aluminium windows and ventilator shutters, side hung type without sash bars, aluminium section weighing 0.55 Kg/RM including necessary jointing cleats, glazing clips, rubber neoprene packing, powder coated anodised aluminium snap beading, screws, powder coated anodised aluminium fittings such as peg stays 150mm long (01 No. for each leaf), Butt hinges type B-21 100mm size (02 Nos for each leaf) & handle (01 No for each leaf) etc complete all as specified and directed. (Note :- Glazing/wire mesh shall be measured and paid separately under respective items of Schedule.)

S & F for pre-painted galvalume aluminum zinc coating GI based trapizoidal profile steel sheet 0.50mm thick (overall) of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as per manufacturers instructions complete all as specified and directed.

S & F for pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick (overall) of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as per manufacturers instructions completed all as specified and directed.

M & L for 100mm thick PCC 1:2:4 type B-2 (using 40 mm graded stone aggregate) as in floors, finished fair & even complete all as specified and directed.

M & L for 100mm thick PCC (1:4:8) type D-2 using 40mm graded stone aggregate as in sub base complete all as directed.(72+160)

M & L for 15 mm thick screed bed or bedding layer in cement mortar 1:4 for laying floor finishes complete all as specified and directed.

M & L for cement conctrete pre-polished chequered coloured paver tiles of size 305x305x25mm thick of approved colour and design as in floor, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles complete all as specified and as directed.

M & L for Pavement floor vitrified tiles of size 300x300x10mm thick (Endura tiles of Johnson or equivalent makes listed in List of Makes) set, jointed and pointed in neat cement slurry and pointed with grey cement and pigment to match the colour of tiles in floor complete all as specified and directed.

M & L for Pavement floor vitrified tiles of size 300x300x10mm thick (Endura tiles of Johnson or equivalent makes listed in List of Makes) set, jointed and pointed in neat cement slurry and pointed with grey cement and pigment to match the colour of tiles in vertical surfaces such as skirting or dado complete all as specified and directed.

M & L for 60mm thick PVC moulded precast interlocking paving blocks factory casted using grey cement and pigment, casted in an automatic plant working on vibration and simultaneous hydraulic compression from top, confirming to IS-15658-2006 and of shape haxagon/ triangular/ zigzag/ I-shaped etc. as directed having compressive strength not less than 350 Kg/ Sqcm laid over and including 25 to 30mm thick layer of sand cushioning including filling the interstices with & including sand and interstices on edges filled with PCC 1:2:4 type B-1 finished even and smooth without using extra cement complete all as directed.

M & L for cement concrete in pavement/ hardstanding having a minimum works test beam flexural strength of 40 kg. per Sqcm at 28 days using not less than 400 Kg of cement per cum of finished concrete, coarse sand and graded stone aggregate of 40mm nominal size in appropriate proportions as per specified in design criteria approved by GE, thickness of concrete 25 cm or less, mechanically vibrated using needle and surface vibrators including use and waste of steel form work with sturdy mild steel channel sections in bays between joints i.e. Contraction, expansion joint/or between the two construction joints complete all as specified and directed.

M & L for rendering 5mm thick in CM 1:3 on concrete surface or on fair faces of brick surfaces of ceiling, finished even and smooth without using extra cement complete all as specified and directed.

M & L for rendering 10mm thick in cement mortar 1:3 on fair faces of brick or concrete surfaces finished even and rough for receiving wall tiles/dado complete all as specified and directed.

M & L for rendering 10 mm thick on fair faces of brick masonry/ concrete surface in CM (1:6), finished even and smooth without using extra cement complete all as specified and directed.

M & L for 15mm thick rendering in CM 1:6 on stone masonry surfaces or on other than fair faces of brick masonry surfaces, finished even and smooth without using extra cement complete all as specified and directed.

M&L for rendering 15 mm thick CM (1:4) mixed with WPC @ 3% by weight of cement on external surface of brick or concrete and finished the surface even smooth without using extra cement complete all as specfified and directed. (Note :- Supply only Water Proofing Liquid shall be measured and paid separately) (10+10+10)

S & F 10mm thick wooden laminated flooring floating glue less click locked (HDF based tongue and groove ) and sealed in a manner similar to a jigsaw puzzle on concrete slab/base/on hard wood flooring or virtually and other flat hard surface including 10mm thick under layer of EPE foam sheet of best quality complete all as specified and directed. (Make Action tesa or equivalant brand as approved by GE)

S & F teak wood of any size for wall antique moulding decoration complete all specified and as directed.

S & F wooden boarding of any size for gap filling between wall & wall panelling complete all specified and as directed.

S & F solar control film 25 micron reflective type sticked to glass panes as per manufacturer instructions complete all specified and as directed.

S & F 5.5mm thick sheet glass ordinary quality and glazing with oil putty in squares exc 0.5 sqm in each pane complete all specified and as directed.

M & L for wire netting of galvanised steel wire 1.40mm dia fixed with tinned tacks of wire staples for size of mesh 25mm, complete all as specified and as directed.

M & L for preparing newly plastered walls surfaces and applying two coats of plastic emulsion paint over a coat of priming paints plaster coat over a coat of 1mm thick wall care putty complete all as specified and directed. (Make : For wall putty- Birla white/Bison wall putty of Berger/Narolac wall putty/Asian paint powder putty /Acro wall guard.) (60+38)

Material and labour for preparation of newly plastered surfaces of wall, applying two coats of weather proof acrylic paint over one coat of exterior grade acrylic primer complete all as specified and directed. Make-Apex Ultima of Asian, weather shield MAX of ICI/Dulux, weather coat long life of Beger, Acroguard 3X of Acro paint.

"M&L for complete removal of existing treatment on walls, chajjas etc over 10cm in width or girth including cleaning of any mortar drops, fungus efflorescent salts etc and preparation of old plastered surfaces, priming plastered and other surfaces with alkali resistant priming paint and applying two coats of acrylic plastic emulsion paint including a Coat of 1 mm thick wall care putty suitable for plastic emulsion paint complete all as specified and directed. (Make : For wall putty- Birla white/Bison wall putty of Berger/Narolac wall putty/Asian paint powder putty /Acro wall guard.) "

M & L for preparation of old painted steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint of 1st grade quality complete all as specified and directed.

M & L for preparation of new or previously untreated wooden or wood based surfaces of any description not otherwise described over 10 cm width or girth and applying two coat of synthetic enamel paint of 1st grade quality over and including one coat of pink primer complete all as specified and directed.

M & L for preparation new or previously untreated steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint of 1st grade quality over and including one coat of red oxide zinc chrome primer complete all as specified and directed. (5.97+100+6.4)

M & L for preparation new or previously untreated steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint of 1st grade quality over and including one coat of red oxide zinc chrome primer complete all as specified and directed.

M & L for preparing surface of wood or wood based materials, new or old of any description and girth, not otherwise described and treated with creosote complete all as specified and directed.

M & L for French Polishing on new wooden or wood based surfaces of any description width or girth including cleaning and preparing the new surface with two or more coats complete all as specified and directed.

S & F PVC(SWR) pipe 110mm dia as in weep hole, embedded properly in masonry while construction complete all as specified and directed.

S & F for 2 holes flange bearing unit of 40mm dia shaft for floors including nuts & bolts complete all as specified.

S & F for heavy duty caster wheel 40mm dia to steel frame complete all as specified.

E/M ITEMS Taking down carefully copper/aluminium point wiring (light, fan, socket or power) complete from existing conduits, from PVC Casing/capping with all fittings, such as switches, ceiling rose, pendants, sockets, lamp holder, fan regulators, sketch/brackets light fittings (except tube light fitting) etc and removal of old material from site (except switches, sockets and fittings to be reused) and making good disturbed surfaces of walls, floors ceiling etc complete all as specified and directed to match with existing surfaces.

Taking down main switch/DB’s including MCB’s with board and fixture of any description and making good disturbed surface of walls etc complete all as directed.

Taking down old tube light fittings/light fittings/security lights any type and removal of old light fittings from site (except light fittings to be reused) and making good disturbed surfaces of walls, ceiling etc complete all as specified and directed to match with existing surfaces.

Taking down the existing unserviceable submain/service connection wiring any size and any description including conduits all as directed.

M & L for point wiring complete with 1.5 Sqmm single core multistranded copper conductor of 1100 volts grade PVC insulated and unsheathed FRLS-H cable drawn through and including PVC rigid non metallic conduit (minimum 20mm bore size) and conduit accessories concealed in walls/ceiling/floors all as per IS, including 1.5 Sqmm single core multistranded copper conductor of 1100 volts grade PVC insulated and unsheathed FRLS-H green colour cable as earth continuity conductor to common earth & connecting to earth dolly for the following :- (Note : The rate quoted shall deemed to include for cutting chases for concealing PVC conduit and making good disturbed surfaces. )

One light point/fan point/bell point controlled by one, one way switch. (42+13)

One 5 Amps socket outlet/switch socket outlet on independent board.

One 5 Amps socket outlet/switch socket outlet on same board with other switches.

M & L for point wiring complete for 15 Amps socket outlet on independent board with 4 Sqmm single core multistranded copper conductor of 1100 volts grade PVC insulated and unsheathed FRLS-H cable drawn through and including PVC rigid non metallic conduit (minimum 20mm bore size) and conduit accessories concealed in walls/ceiling/floors all as per IS, including 4 Sqmm single core multistranded copper conductor of 1100 volts grade PVC insulated and unsheathed FRLS-H green colour cable as earth continuity conductor to common earth & connecting to earth dolly. Notes : The rate quoted shall deemed to include for cutting chases for concealing PVC conduit and making good disturbed surfaces.

M & L for modular metal flush box for the following modules :-

3 Module

4 Module

6 Module

M & L for modular white cover plate with frame for the following modules :-

3 Module

4 Module

6 Module

S & F switch piano flush type 5/6 Amps, single pole, one way, 230 Volts complete all as specified and directed.

S & F modular switch, 1 way 6A, 240 Volts, 1 module complete all as specified and directed.

S & F modular bell push, 1 way 6A, 240 Volts, 1 module complete all as specified and directed.

S & F, modular socket outlet for two and three pin combined, 6 Amp, 240 Volts, 2 Module type complete all as specified & directed.

S & F switch socket combination two-in-one (multipurpose), 5 pin , 5/6 Amp, modular type, 240 Volts complete all as specified & directed.

S & F switch socket combination two-in-one (multipurpose), 6 pin, 5 Amp and 15 Amp, modular type, 240 Volts complete all as specified & directed.

S & F bell Ding-dong type, AC, 230 Volts, single pole complete all as specified & directed.

S & F ceiling rose, three terminal, PVC / poly carbonate isolated body, complete all as specified and directed.

S & F MCB SP 6 to 32 Amps, 240 volts, C-curve, rupturing capacity 10KA conforming to IEC-60898, Part-I complete, all as specified & directed.

S & F MCB SPN 40 Amps, 240 volts, C-curve, rupturing capacity 10KA conforming to IEC-60898, Part-I, complete, all as specified & directed.

S & F sheet metal enclosure double door DB SPN 12 way, 240 volts protection class IP-43- IK 09 made out of CRCA mild steel sheet surface with epoxy powder coated surface confirming to IS-13032, IS 8623, BS-5484 with tinned copper bus bar of 200 Amps capacity all as specified and directed. {Model/Make : Cat Part No 5076 12 of make Legrand or equivalent model of makes listed in List makes}. (Note: MCBs shall be measured and paid separately)

S & F for submain wiring with 2 single core PVC insulated & PVC unsheathed FRLS-H cable 1100 Volt grade with 06 Sqmm copper multistranded conductor drawn through and including PVC conduit 25mm bore concealed in walls/ceiling/floors including 6 Sqmm single core multistranded copper conductor 1100 volts grade PVC insulated and unsheathed FRLS-H cable as earth continuity conductor to common earth and connecting to earth dolly complete all as specified and directed. Note: - Two runs of main cable, one run of earth continuity conductor and one run of conduit will be measured and paid as one length only. (ii) The rate quoted shall deemed to include for cutting chases for concealing PVC conduit and making good disturbed surfaces.

Supply and fix baton integrated LED tube light batten fitting, 18 Watt 230 V, 50 Hz with with all standard fittings etc pre-wired and connecting the fitting from ceiling rose/connector using copper flexible cord of size 1.5sqmm, 3 core of suitable length complete all as specified and directed. {Model/Make : Cat Part No BCLSB 18WH for Baton integrated tube light fitting of make Bajaj or equivalent model of makes listed in List of makes}.

Supply and fix LED tube light fitting, baton integrated LED channel 10 Watt 230 V, 50 Hz with with all standard fittings etc pre-wired including LED tube, colour temperature neutral white and connecting the fitting from ceiling rose/connector using copper flexible cord of size 1.5sqmm, 3 core of suitable length complete all as specified and directed. {Model/Make : Cat Part No BCLSB 10 NW of make Bajaj or equivalent model of makes listed in List makes}.

Supply and fix 18 watt LED Downlighter with aluminium housing with bracket and clamp for wall mounting arrangments and connecting the fitting using copper flexible cord of size 1.5sqmm, 3 core of suitable length complete all as specified and directed. {Model/Make : Cat Part No. LCDN-18-CDL/TL/WW of make Crompton or equivalent model of makes listed in List makes}.

S & F exhaust fan of 200mm sweep, High quality engineering plastic body, 1350 RPM, 32 watt, air delivery 520 m3 /h, suitable for SP 230/250 Volts, 50 Hz AC supply & connecting with and including 3 Nos 1.5 Sqmm single core, PVC insulated but unsheathed FRLS 1100 Volts grade cable with multistranded copper conductor from ceiling rose to fan complete all as directed. Model & Make : Model Ventilair DX of make Havells or equivalent model of Make Bajaj/ Crompton/Usha/Orient

S & F exhaust fan of 300mm sweep,metal body, heavy duty, double ball bearing, 1400 RPM, 90 watt, 4 blades, air delivery 1950 m3/h, suitable for SP 230/250 Volts, 50 Hz AC supply complete with louver shutter including fixing/ grouting of frame & louvers in wall & connecting with and including 3 Nos 1.5 Sqmm single core, PVC insulated but unsheathed FRLS 1100 Volts grade cable with multistranded copper conductor from ceiling rose to fan complete all as directed. {Model & Make : Model Turbo Force Single phase of make Havells or equivalent model of Make Bajaj/ Crompton/Usha/ Orient}

S & F exhaust fan of 380mm sweep,metal body, heavy duty, double ball bearing, 1400 RPM, 4 blades, air delivery 3700 m3/h, suitable for SP 230/250 Volts, 50 Hz AC supply complete with louver shutter including fixing/ grouting of frame & louvers in wall & connecting with and including 3 Nos 1.5 Sqmm single core, PVC insulated but unsheathed FRLS 1100 Volts grade cable with multistranded copper conductor from ceiling rose to fan complete all as directed. {Model & Make : Model Turbo Force of make Havells or equivalent model of Make Bajaj/ Crompton/Usha/ Orient}

S & F exhaust fan of 450mm sweep,metal body, heavy duty, double ball bearing, 1400 RPM, 4 blades, suitable for SP 230/250 Volts, 50 Hz AC supply complete with louver shutter including fixing/ grouting of frame & louvers in wall & connecting with and including 3 Nos 1.5 Sqmm single core, PVC insulated but unsheathed FRLS 1100 Volts grade cable with multistranded copper conductor from ceiling rose to fan complete all as directed. Model & Make : Model Ventil Air DB of make Havells or equivalent model of Make Bajaj/ Crompton/Usha/Orient