DIGITAL DIAL SNAP GAUGE WITH LEAST

The tenderer with past performance of satisfactory execution of contracts to SC Railway, or Other Zonal Railways/Pus for supply of the same / similar items (Like Digital Dial Snap Gauge, Dial Snap Gauge, Snap Gauge, Adjustable Snap Gauge, Fixed Snap Gauge, Outside Snap Gauge, Master Snap Gauge, Digital Snap Gauge, Digital Dial Gauge, Digital Dial Indicator, Dial Indicator, Magnetic Dial Indicator, Dial Test Indicator, Digital Comparator, Mechanical Comparator, Comparator Gauge, Outside Micrometer, Digital Outside Micrometer, Vernier Caliper, Digital Vernier Caliper, Inside Micrometer, Digital Inside Micrometer, Tubular Inside Micrometer, Three- Point Internal Micrometer, Bore Gauge, Digital Dial Bore Gauge, Cylinder Bore Gauge, Internal Diameter Gauge, Plug Gauge, Plain Plug Gauge, GO/NO-GO Plug Gauge, Ring Gauge, Plain Ring Gauge, GO/NO-GO Ring Gauge, Master Ring Gauge, Master Plug Gauge, Thread Plug Gauge, Thread Ring Gauge, Taper Plug Gauge, Taper Ring Gauge, Spline Plug Gauge, Spline Ring Gauge, Measuring Pin Gauge, Pin Gauge Set, Feeler Gauge, Radius Gauge, Screw Pitch Gauge, Depth Gauge, Digital Depth Gauge, Height Gauge, Digital Height Gauge, Dial Height Gauge, Surface Gauge, Slip Gauge, Gauge Block Set, Angle Gauge, Bevel Protractor, Digital Bevel Protractor, Wheel Diameter Gauge, Wheel Profile Gauge, Wheel Gauge, Flange Thickness Gauge, Flange Height Gauge, Back-to-Back Gauge, Wheel Measuring Gauge, Brake Disc Measuring Gauge, Bearing Measuring Gauge, Bearing Clearance Gauge, Roller Bearing Gauge, Journal Diameter Gauge, Axle Diameter Gauge, Bore Diameter Gauge, Outside Diameter Gauge, Inside Diameter Gauge, Gauge Bracket, Gauge Frame, Gauge Arm, Gauge Contact Holder, Gauge Anvil, Replaceable Gauge Contact, Gauge Setting Fixture, Master Gauge Fixture, Bearing Inspection Gauge, Bearing Inspection Fixture, Axle Measuring Gauge, Journal Measuring Gauge, Wheel Inspection Gauge, Brake Disc Inspection Gauge, Brake Shoe Inspection Gauge, Bogie Component Inspection Gauge, LHB Coach Component Gauge, Locomotive Component Inspection Gauge, GO Gauge, NO-GO Gauge, Limit Gauge, Checking Gauge, Inspection Gauge, Assembly Checking Fixture, Dimensional Checking Fixture, Precision Measurement Fixture, Ra) for a quantity of 20 percent or more of tendered quantity against a single contract during last three years prior to, and excluding tender opening date may be considered as responsive to SC Railways requirements for placement of bulk and regular order. Tenderers are requested to submit the past performance report such as Copies of R Notes/CRAC/Proof of acceptance of material by consignee etc. along with their offer; failing which offer will be summarily rejected without making any back reference. However, in cases where the tenderers are having satisfactory past supply performances of tendered items for stock items with IR, the supply performance data available in iMMIS with IR shall be taken into consideration while evaluating the offers of the tenderers

If such past performance level is lower, then the offer may be considered as responsive to SC Railways requirements for placement of developmental order not exceeding 20 percent of the net procurable quantity. The tenderers, who have no past performance as above, may also be considered for such developmental orders, but for consideration of such developmental orders, they shall submit details of M & P, testing facilities, STR & QAP, technical manpower available, UDYAM Registration Certificate for same/similar items etc., along with their offer

In case, the tenderer participates as an authorized dealer, then the performance as required above shall be that of Principal (OEM) authorizing the agent or bidder for the same OEM. It may so happen that the agent/dealer has credentials of past supply for a different Principal/OEM, then it will not be considered as performance. In case, the tenderer is authorized agent, tenderer shall submit the tender specific authorization. In case, the dealer/distributor of the OEM of the acceptable make, tenderer should upload the current authorization/dealership certificate issued by the OEM

For detailed instructions refer, GENERAL TENDER CONDITIONS attached with NIT and/or available as Public Document on IREPS website Goods and Services/South Central Railway.

Have you submitted a Bid security declaration as per Tender conditions

Have you furnished authorization/dealership certificate issued by OEM as specific authorization? (if manufacturer is not quoting directly)

Have you furnished a performance statement?

Have you furnished the statement of Deviations? (preferably 'NIL')

Have you indicated the complete name and address of the agents and details of the services to be rendered by the agents?

Have you submitted relevant/ valid documents as per Eligibility Criteria?

Have you read instructions to tenderers, General conditions of contract, IRS conditions of contract attached with the tender?

If you are not a MSE or a consortia of MSEs formed by NSIC, please indicate percentage of sub contracts in execution of this tender that will be from Micro and Small Enterprise (in percent of order value) with further breakup of MSE owned by SC/ST. (Information will be provided in % terms with 6 fileds; Micro owned by SC, Micro owned by ST, Micro owned by Others, Small industry owned by SC, Small industry owned by ST, Small industry owned by Others.

Have you attached any performance statement separately

Tenderers must acknowledge acceptance of IRS conditions of contract

Have you attached any commercial deviation

Have you attached any Technical deviation

Tenderer should enclose latest technical literature/catalogue duly highlighting the model no/catalogue no/product code offered TP assess suitability

Restrictions under Rule 144 (xi) of GFRs-2017: a) I have read the clause regarding Restrictions under Rule 144(xi) of GFRs-2017 on procurement from a bidder of a country which shares a land border with India and as detailed in Tender Documents. b) I certify that this bidder is not from such a country or, if from such a country, has been registered with the Competent Authority. c) I hereby certify that this bidder fulfills all requirements in this regard and is eligible to be considered. (Wherever applicable, evidence of valid registration by the competent authority shall be attached). Note: If the tenderers are not agreeable to above declaration, they have to categorically mention about the disagreement in Techno Commercial Deviation.

Have you submitted relevant/ valid documents as per Eligibility Criteria?

Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.

Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.