Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹4.6 LAccepted-AOC TP 117 2ND FLOOR MAURYA ENCLAVE PITAMPURA DELHI 110034 | DELHI | DELHI | DELHI | 110034 | L1 | Accepted-AOC Lowest bidder | |
| 2 | L2₹4.7 L+₹4,147 (0.88%)Rejected-AOC 16 20 GALI NO 7 8 SWAROOP NAGAR EXTENSION DELHI 110042 | DELHI | NORTH DELHI | DELHI | 110042 | L2 | Rejected-AOC other than lowest bidder | |
| 3 | L3₹5.1 L+₹35,335 (7.51%)Rejected-AOC | L3 | Rejected-AOC other than lowest bidder | |
| 4 | L4₹5.2 L+₹48,954.42 (10.4%)Rejected-AOC | L4 | Rejected-AOC other than lowest bidder | |
| 5 | L5₹5.5 L+₹76,650 (16.3%)Rejected-AOC | L5 | Rejected-AOC other than lowest bidder |
Tender Value
₹8 L
EMD Value
₹16,000
Closing Date
6 May 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
AGE I
CG Noida
MISC REPAIR TO STREET LIGHTS GARDEN GATE LIGHTS EM INSTALLATION UNDER AGE I CG NOIDA.
2023_MES_589424_1
AGE I CGN 08 23 24
Open Tender
Electrical and Maintenance Works
Item Rate
330 days
Noida
E b i
7 documents required · 7 mandatory
₹500
AGE I CG
₹16,000
27 Jun 2023
14 Apr 2023
8 May 2023
14 Apr 2023
6 May 2023
28 Apr 2023
Amount
Dismantling and taking down carefully street light fittings of any make and capacity and any type, opening for examination & for replacement of unserviceable spare part and refixing the same in position after necessary repairing at the same / other location, including provision of necessary T&P like ladder / Boom Vehicle, tools etc as required for taking down & refixing of street light complete. Note:- Replacement of defective spare part of fitting like LED driver,flexible copper conductor (to make it functional) will be measured & paid separately as supply & fix in repair. However, cost of replacement of unserviceable screws, nuts, bolts and cleaning of fitting,insulation tape shall be deemed to be included in quoted rate. All street light complaints notified to the contractor shall be attended to and rectified within 24 hours by engaging requisite manpower on all working days.
Dismantling and taking down carefully high mast light fittings of any make, capacity and any type, opening for examination & for replacement of unserviceable spare part and refixing the same in position after necessary repairing at the same / other location, including provision of necessary T&P including greasing for pulleys and other moving parts as required for taking down & refixing of high mast light complete. Note:- Replacement of defective spare part of fitting (to make it functional) will be measured & paid separately as supply & fix in repair. However, cost of replacement of unserviceable screws, nuts, bolts and cleaning of fitting,insulation tape shall be deemed to be included in quoted rate.
M&L for preparation of old painted surface of steel tubular pole 9 metre long & applying one coats of aluminium paint on exposed surface, painting of band in alternate strip of 0.25 metre each with yellow & black synthetic enamel paint upto 1.5 meter height above PCC coping, including writing pole No with black synthetic paint complete as specified & directed
M&L for preparation of old painted surface of steel tubular pole 11 metre long & applying two coats of aluminium paint on exposed surface, painting of band in alternate strip of 0.25 metre each with yellow & black synthetic enamel paint upto 1.5 meter height above PCC coping, including writing pole No with black synthetic paint complete as specified & directed
Taking out LT underground cable from trenches etc, aluminium conductor of size 16/10 sqmm 2 / 4 core all as specified and directed. Note:- Earthwork will be measured and paid separately under respective items of this schedule.
Supply, laying, testing and connecting of XLPE insulated, PVC inner sheathed, armoured with galvanised steel strip or wire, heavy duty, LT underground cable, with aluminium conductor 1100 volt grade of size 16 Sqmm 4 core laid in trenches / duct passing through pipe / duct or fixed on pole and connecting and testing etc complete all as specified & directed.
Supply, laying, testing and connecting of XLPE insulated, PVC inner sheathed, armoured with galvanised steel strip or wire, heavy duty, LT underground cable, with aluminium conductor 1100 volt grade of size 10 Sqmm 4 core laid in trenches / duct passing through pipe / duct or fixed on pole and connecting and testing etc complete all as specified & directed.
Excavation in trenches not exc. 1.5 m in depth and not exc. 1.5 m wide for taking out or laying PVC cable/ GI pipe of any size in soft/loose soil complete all as specified and directed.
M&L for sand cushioning in layer not exc. 25 cm thick spreading out, levelling complete all as specified and directed.
Supplying and laying old size bricks, common burnt clay building bricks, sub-class ‘A’ designation 75 for cable protection complete all as specified and directed.
Returning, filling in trenches including spreading levelling, watering and well ramming in layers n.exc. 25 cm thick in soft/loose soil complete all as specified and directed.
Removing of surplus soil/excavated material to a distance not exc. 50 m away from the starting point and depositing where directed at al level not exc. 1.5 m above the starting point complete all as specified and directed.
Supply and fixing of galvanised steel tubes, 40 mm bore, light grade passing through electric cable for crossing road, drain or vertical support to wall or protection for cable complete as specified and directed by Engr-in-charge complete.
Supply only LED Electronic driver 70 W, 0.7A, 240V, 50Hz operating range 120-277V complete as per existing LED driver.
Supply only LED Electronic driver 150 W 0.7A, 240V, 50Hz operating range: 120-277V complete as per existing LED driver.
Supply only LED Electronic driver for street light 45W, 240V, 50Hz operating range: 120-277V complete as per existing LED driver.
Supply only LED Electronic driver for street light 60 W, 240V, 50Hz operating voltage range 100-107V complete as per existing LED driver.
Supply only LED Electronic driver for street light 90 W, 240V, 50Hz operating voltage range 100-107V complete as per existing LED driver.
Dismantling of electric pole up to 9 metre long and taking out from the trench with and including necessary excavation, earth work, breaking of pole foundation and setting aside for reuse making good the disturbed surface complete all as specified and as directed.
Fixing only electric pole of height up to 9m in re-location complete all as specified and directed. [Note: Necessary excavation, earth work, foundation & coping will be measured and paid separately]
S&F in repairs LED flood light 70 watt 230 V AC outdoor type with thermal management in multiple optics and equipped with IP66 protection, with impact and corrosion resistant complete with driver and lamp complete all as specified and as directed.
S&F in repairs 240V, 10 KA 'C' curve miniature circuit breaker (MCB) of single pole current carrying capacity 6-32 AMP, in the street light junction box complete with connection testing and commissioning all as specified and directed. Make: Havells cat no. DHMZCSPF006-032 or equivalent of ABB/Schneider.
Supply, laying & testing PVC insulated, PVC sheathed cable galvanized steel strip or wire armoured, electric control cables (Heavy duty) with stranded copper conductor of size 1.5 sq mm, 3 core, 1100 Volts grade complete including taking down old cable all as specified and directed.
Supply and fix pole mounted juction box made out of one piece moulded SMC IP65 protection having aluminium bus bars 100 Amp single phase and neutral with one No MCB SP 6 Amp for street light, cable entry from bottom, maintenance free size inside dimension 300x200x105 mm fixing on pole with MS flat 25x3mm clamp including nut bolts, front openable all as specified and directed.
M&L for plain cement concrete 1:4:8 type D2 (using 40mm graded stone aggregate) as in foundations, filling and mass concrete all as specified and as directed.
M&L for plain cement concrete 1:3:6 type C2 (using 40mm graded stone aggregate) as in foundations, filling and mass concrete all as specified and as directed.
M&L for PCC 1: 2:4 type B1 using 20mm graded stone aggregate for coping of poles complete including taking down old coping all as specified and directed by Eng. In Charge..
Supply and fixing LED bollard light fitting 10 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete including taking down old unservicable lights. Make : Havells model name BAMBOOBLS8WLED830PSYMTOPC or equivalent of make Crompton/Phillips.
Supply and fixing post top lantern LED type 20 watt 230 watt volts AC outdoor type with decorative post top for 360 degree indirect light IP 65 protection with impact and corrosion resistant complete with driver and lamp complete including taking down old light fitting. Make: Phillips/Bajaj/Havells
M&L in replacement for rigid non-metallic PVC conduit 20mm dia (external) excluding boxes (junction/terminal) but inclusive of all tees, bends, elbows, reducers, bell mouth tube ends and fixing accessories such as couplers, lock nuts, saddles, pipe hooks etc., complete all as specified and as directed by the Engineer-in-Charge
M&L for fabrication of street light bracket made of GI pipe light grade of bore 40 mm, bent to 45 degree angle, length of bracket not less than 1.5 meter including 4 nos. of MS clamp of thickness not less than 5 mm with nut, bolts,washers including applying one coats of red oxide primer and one coat of black paint complete all as specified and directed by Engg. In Charge.
M&L for fabrication of street light bracket made of GI pipe light grade of bore 25 mm bent to 45 degree angle, length of bracket not less than 1.5 meter including 4 nos. of MS clamp of thickness not less than 5 mm with nut, bolts,washers including applying one coats of red oxide primer and one coat of black paint complete all as specified and directed by Engg. In Charge.
S&F in repair 3 pole contactor 440 volts 50 Hz 3 phase 25-45 Amps rating complete including fixing in existing street light panel complete all as specified and directed. Make : L & T cat no. CS94110 or equivalent of Siemens/Schneider. Note: All fixing arrangement, cutting welding of existing panel board as per site requirement deemed included in quoted rates.
S&F time switches astro type (having longitude and latitude of Indian cities in memory) 110 V-240 V AC three phase complete including connecting all as specified and directed. Make L&T Cat no. T3DDT0 or equivalent of Scheinder/Siemens
S&F in repairs wire rope 6mm dia in flexible 7/19 construction in AISI 316 Marine grade stainless steel, with breaking load capacity 2350 Kgs and factor of safety more than 5 times of SWL including SS thimble & copper ferrule complete all as specified and as directed. Make: Asahi/ Sanghvi Overseas/ Pengg Usha Martin
S&F 12W LED Solar street light fitting high efficiency premium Solar Integrated Street Light with built in mono Crystalline Panel, Lithium Ferro Phospate (LiFeP0 4 ) Battery, MPPT Charge Controller and PIR Sensor with Colour Temperature 6000-6500K, 2 Days autonomy with dimming profile complete including fixing to existing solar street light pole all as specified and directed. Make: Bajaj Cat no. Supremo 12W All-in-One Standard or equivalent of Phillips/Crompton.
KKP Enterprises
DP COMPLEX
M/S BEE ESS ENTERPRISES
MK Enterprises
PRASAD ELECTRICALS
KRISHANA ELECTRIC WORKS
M/S ASHISH AND CO
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .