PROVISON OF EMERGENCY EXIT FOR CERTAIN BUILDING IN TECH AREA AND ADDN ALTN TO STATION ARMORY INCLUDING FOOTPATH AND FIRE ALARM SWITCH AT AF STATION OJHAR

Amount

Excavation in trenches, not exceeding 1.5 m wide and not exceeding 1.5 m in depth for foundation etc, not exceeding 10 sqm on plan and getting out hard/dense soil complete all as specified and directed

Material and labour for cement concrete 1:4:8 type D 2 using 40mm graded stone aggregate in foundation, filling and mass concrete complete all as specified and directed.

Material and labour for Reinforced cement concrete, M-25 (Design Mix) with using 20 mm graded stone aggregate as in foundations, including rafts, footings, foundation beams, plinth beams, bases for columns, etc., basement slabs, under-reamed piles and mass concrete complete all as specified and directed.

Use and removal of form work to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams, and similar work, vertical or to batter on rough finished flat surface of concrete complete all as specified and directed.

Supply and fix mild steel TMT bars of 8 mm dia and over cut to length, bent to shape required, including bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips, complete all as specified and directed.

Supply and fix mild steel TMT bars of 5 mm dia and over up to and including 10mm dia as in stirrups, spacers and binders, cut to length, bent to shape required, including bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips, complete all as specified and directed.

Supply and fix mild steel work in tubular trusses of design as approved, purlins, rafter, posts, gusset plates cleats, wind ties etc including special shaped washers etc complete using ERW or induction butt welded tubes conforming to IS:1161-1979 grade St-240, complete all as specified and directed.

Supply and fix mild steel work in Hand rails, half round or other mild steel section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embedding in concrete and screwing etc. wind ties for roof including securing bolts, posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc., flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 all as specified and directed.

Supply and fix mild steel screw bolts (Machine made) with hexagonal or square heads at one end and the screwed the other to be fitted with washers and one hexagonal or square nut exc 5 cm but n.exc 10 cm long, dia of shank 5 to 10 mm all as specified and directed.

Material and labour for two coats of synthetic enamel paint on steel surfaces over one coat of red oxide or zinc chrome primer, of any description over 10cm width or girth including preparation of new or previously untreated surfaces of steel compete all as specified directed

Removing excavated material to a distance exceeding 1.5 Km but not exceeding 5 Km out of MD land and depositing where directed at a level not exceeding 1.50 m above the starting point complete all as specified and directed.

Returning, filling in, including spreading, leveling, watering and well ramming in layers not exc 25cm thick with soils complete all as specified and directed.

Cutting openings built in cement mortar, through brick walls for door, window and other openings or enlarging existing openings. converting window into door openings, etc. or cutting out defective brick work for under-pinning, including providing, fixing and removing shoring, cleaning and stacking bricks, removing surplus serviceable bricks, hard-core etc., to store and rubbish not exc. 50m all as specified and directed.

Forming jambs in CM 1:4 to openings (to foregoing item), including cutting, toothing and properly bonding into old work, also facing, jointing and pointing to match existing work, complete all as specified and directed.

Supply and fix 2nd class hardwood Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, complete all as specified and directed

Supply and fix 35mm thick factory made Plain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers supplied and fitted to chowkats complete all as specified and directed Note : Shutters shall be brought at site without primer and got approved by GE.

Supply and fix 100 mm size MS butt hinges, medium weight, cold rolled mild steel compete all as specified and directed

Supply and fix 150 mm long aluminium anodised barrel tower bolts of extruded section, ISI marked compete all as specified and directed

Supply and fix 150 mm size extruded aluminium alloy handles, fabricated type, anodised, ISI marked compete all as specified directed

Supply and fix 300 mm long mild steel Chromium plated sliding door bolts, plate type, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed compete all as specified and directed

Material and labour for two coats of synthetic enamel paint over one coat of pink primer on wood or wooden based surfaces exc 10cm width or girth including preparation of new or previously untreated surfaces compete all as specified and directed

Excavating over areas not exceeding 1.5m deep and getting out in Hard/dense soil complete all as specified and directed

Material and labour for Moorum/red bajri filling in floors or pavings, laid in layers not exceeding 15 cm thick spread, levelled and rammed including watering complete all as specified and directed

Material and labour for hardcore of gauge not exceeding 63mm broken stone or boulder aggregate deposited, spread and levelled in layers not exceeding 15cm thick, watered and rammed to a true surface completed all as specified and directed.

Material and labour for 75mm thick plain cement concrete 1:4:8, type D2 using 40 mm graded stone aggregate as in sub base of floor complete all as specified and directed.

Supply and spreading sand under interlocking tiles including watering and consolidation complete all as specified and directed

Material and labour for Machine press rubber moulded glazed precast concrete interlocking paver blocks, shape, size and colour as approved by GE, with grey cement and pigment and confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade, all as specified and directed. Make : Bharat / Mahavir/ Shree Tiles

Material and labour for Reinforced cement concrete M-25 (Design Mix) using 20 mm graded stone aggregates as in columns, etc., complete all as specified and directed.

Use and removal of formwork square or rectangular surface of concrete sides of pillars, posts, struts, piers, columns and stanchions etc., rough finsihed surface complete all as specified and directed.

Material and labour for exterior grade wood plank finished tiles of size 1200 mm x 200 mm x 10-12 mm of thick sample and pattern as approved by GE, laid on vertical surface as in dados, skirtings set in chemical tile adhesive and jointed in neat cement slurry over and including 10 mm thick backing coat in CM1:4 complete all as directed Make : Somany, Cat No. NEO ESS ENTIA COFEE or equivalent model in Johnson/Kajaria

Demolition reinforcement Concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed

Taking down existing copper/aluminum point wiring (light/ fan/ socket or power points) complete including (fittings such as switches, ceiling roses, pendants, regulators, sockets, Light fitting etc) including wooden battens /casing /capping and conduit etc and making good disturbed surface of walls, ceilings and floors etc. complete all as specified and directed.

Material and labour for Point wiring with 1.5 Sqmm (nominal area) FRLS, multistranded, PVC insulated sheathed copper stranded conductor cable run in and including concealed in wall or /floor passing through ERW steel conduit not less than 20 mm dia along with flame proof & weather proof accessories such as bends, tee, junction boxes, covers, elbows, etc of suitable size including 1.5 Sqmm, FRLS, multistranded, PVC insulated copper earth continuity conductor connected to common earth dolly and including flame proof MS/GI sunken boxes, sockets etc for one light/call bell point controlled by one, one way switch complete all as specified and directed. Note : Cutting chases and making good wall/ Roof/ Floor including making good of disturbed surfaces and finished to match with existing surface are deemed to be included in the quoted rate.

Material and labour for sub main wiring 2 x 4 Sqmm and 1 x 4 Sqmm earth wire PVC (FRLS) insulated copper conductor, single core, 1100 v grade cable in concealed/on surface as required including in stove enameled steel conduit 25mm dia and fittings etc complete all as specified and directed.

Supply, Installation, Testing and commissioning of flame proof-weather proof LED flood fluorescent fixtures with IP 65 degree of protection with reflector and wire guard of 40W 4 feet, complete all as specified and directed. Make : SHYAM SWITCH GEARS, Cat. No. “SSPL/FF/1271” or equivalent model in SUDHIR /BALIGA

Supply and fix flame proof-weather proof switch socket and plug combined 16A, 250V (2 pole+earth), complete all as specified and directed. Make : SHYAM SWITCH GEARS / SUDHIR /BALIGA

Supply, Installation, Testing and commissioning of flame proof-weather proof Distribution Board, 4 way SPN, complete all as specified and directed. Make : SHYAM SWITCH GEARS / SUDHIR /BALIGA

Supply and fix MCB double pole, 32 Amp 240 V complete all as specified and directed. Make : SHYAM SWITCH GEARS, Cat part No. SSPL/RI/146 or equivalent model in SUDHIR /BALIGA

Supply and fix MCB single pole, 10 Amp 240 V complete all as specified and directed. Make : SHYAM SWITCH GEARS, Cat part No. SSPL/RI/146 or equivalent model in SUDHIR /BALIGA

Supply, install, testing and commissioning of microprocessor based networkable analogue 2 loop addressable Fire alarm control panel. The panel should be complying with EN54-2, EN54-4 and approved by LPCB. The fire alarm control panel shall have expandable capacity from 2 loops to 8 Loops. The panel must have full colour 800 x 480 LCD with resistive touch screen and automatic back light dimming. The panel must also have the capability to take addressable intelligent wired and wireless devices on same loop. Each loop shall have a capacity of 127 analogue addressable devices and 127 Base sounders/ base sounder beacons. The panel shall have an event log of minimum 10000 events @1 second resolution, filterable & printable. The panel shall have 3 access levels. Panel shall support upto 5000 cause & effects entries, with upto 20000 inputs controlling and 20000 controlling outputs across the network. The panel shall have capability for peer to peer networking through RS485 network card. The panel must have 4 inbuilt programmable sounder circuits each circuit rated at 2.5A. The panel must have inbuilt 3 programmable inputs and 5 inbuilt programmable relay outputs. The panel shall have upto sub-addressable 512 programmable inputs/ outputs via optional RS485 network COMMS serially connected expansion cards. The panel shall have 240 V AC power supply along with automatic battery charger. The panel shall be fully expandable via common plug in loop driver boards. The user shall have a choice using the panel with 5.25 Amps or 10.25 Amps power supply unit which is inbuilt in the FACP and should be approved to EN54-4. The panel shall have configurable via USB port to PC or memory stick. The panel shall havë dedicated RS232 serial port for optional printer. Approved by LPCB complete all as specified and directed. Make : TATA/Honeywell/ Siemens

Supply, Install, testing and commissioning of control module, complete all as specified and directed Make : TATA/Honeywell/ Siemens

Supply and lay FRLS aluminium foil copper cable 2 core 1.5sq mm, multi stranded for interconnecting devices laid, fixed to wall, ceiling/ loop using proper clamps / clips, complete all as specified and directed. Make: Plaza/ Polycab/ Havells

Supply, install, testing and commissioning of online sinewave UPS for 30 min backup single phase AC input 160V to 260 V and output 230 V + 1% of capacity 1 KVA. complete all as specified and directed. Make : V-Guard/ Vintek/ Champion

Note : The amount against Schedule of Credit on Page No. 28 shall be deducted from the total amount quoted against Sch 'A' while deriving Contract Sum for Acceptance.

sunway associates

Asha Enterprises

shubham Enterprises

SANJAY B SHARMA

M/s M R MAHANA