PROVN OF WIDENING OF ROAD (5.5 MTR) AT CMVL MEERUT CANTT AND SPECIAL REPAIR TO INTERNAL ROAD OF JCOs/OR MD ACCN AT DOGRA FARM UNDER GE (N) MEERUT CANTT

Amount

Surface excavation not exceeding 30 cm deep and averaging 15 cm deep and getting out in soft /loose soil surfaces formed to required slope, gradient, camber, and super elevation etc. complete all as specified and directed.

Removing excavated material ( soils) not exceeding 50m and depositing where directed at a level not exceeding 1.5 m above the starting point complete all as specified and directed.

Rolling and consolidating formation surfaces in cutting with 8 to 12 tonne power roller complete to required levels, gradient , slopes, camber and super elevation including filling depression with and including approved earth which may occur during rolling complete all as specified and directed.

M&L 150 mm thick spread thickness soling ( or sub base ) with broken boulders or quarried stone, interstices filled, surfaces formed and rolled and consolidated to required gradient and camber with 8 to 12 tonne power roller complete all as specified and directed.

M&L 150mm thick in two layer (7.50 cm thick each layer compacted thickness) Water Bound Macadam (WBM) with Granite, trap or Basalt , coarse aggregate of grading 2 (63 to 40 mm size) ,spread, rolled and consolidated to gradient and camber required all as specified.( Area of consolidated thickness of 150mm thick shall only be measured as single layer and it will not be measured in two layers) separately complete all as specified and directed.

Preparing unsurfaced water bound macadam top surfaces by brushing with wire brushes for removing caked mud etc, sweeping with brooms and finally fanning the cleaned surface with gunny bags to remove all loose dirt etc.complete all as specified and directed.

M&L applying evenly a priming coat with VG-10 grade bitumen at 10Kg/10 Sqm complete all as specified and directed..

M&L Bituminous premix asphaltic semi dense concrete 40 mm consolidated thickness with 5.5 % binder content (VG-10) by weight of total mix using bitumen of grade VG-10 by mechanical paver, rolled and compacted to required camber and gradient complete all as specified and directed.

M&L Bituminous premix asphaltic semi dense concrete 30 mm consolidated thickness with 5.5 % binder content (VG-10) by weight of total mix using bitumen of grade VG-10 by mechanical paver, rolled and compacted to required camber and gradient complete all as specified and directed.

Dismantling of paver block complete all as specified and directed.

Labour only for machine pressed precast concrete interlocking coloured paverblock PVC moulded any shape and size complete all as specified and directed with grey cement and pigment. (Using paver block as obtained from item No 11)

M&L 60mm thick Machine pressed precast interlocking tiles M-35 in approved design/colour complete all as specified and directed.

M&L sand filling under floor including watering and consolidation complete all as specified and directed.

Labour only for 25 mm thick sand filling under floors/hard standing including watering and consolidation. (Sand obtained from item No -11) complete all as specified and directed.

M&L for PCC 1:4:8 type D2 , 75 mm thick as in floor complete all as specified and directed.

M&L for factory made cement concrete as in kerb stone type B-1 (1:2:4) (Using 20 mm stone aggregate) set in cement mortar 1:6 complete all as specified and directed

M&L for cement concrete 1:3:6 type C1 (20mm graded aggregate) as in kerbs, copings or mud stops, rounded or chamfered on edges complete all as specified and directed.

M&L for prepration of new brick or concrete surfaces and applying two coats of exterior emlusion paint over a coat of primer complete all as specified and directed.

S&F Cat eyes ABS body with scratch and abrassion resistant,micro prismatic,polycarbonate and ultrasonically welded lenses of temperature resistance body, of size 90mm x 100mm x 17mm fixed on road with bituminous adhesive as per manufactures instructions having abrasion resistance creamer coating and reflective surface complete all as specified and directed.

Supply and fixing long delinator made of MS pipe 75mm dia, 900mm height, heavy duty, duly painted with two coats of synthetic enamel paint over one coat of red oxide zinc chrome primer, covered with bands of reflective HIP grade tape, in red, yellow and white in colour, size (150mm x 150mm) incl necessary excavation and earth work in any type of soil fixed in PCC 1:2:4) TYPE B-2 of size 300mm x 300mm x 300mm block and covered with 1mm thick wire cage complete all as specified and directed. (Make : D-02 of M/s Sapphire Road Safety Products or equivalent as approved by GE).

M&L for cleaning the road surfaces of dirt, oil, grease spots and foreign materials etc. and applying 2.5 mm thick hot applied thermoplastic retro reflective road marking with extrusion method in uniform thickness and width, with glass beads as per clause 803 of MOST specification including cleaning of road surfaces complete all as specified and directed.

Preparing the black top surface of roads with wire brushes for removing caked mud etc, sweeping with brooms and finally fanning the cleaned surface with gunny bags to remove all loose dirt etc applying by providing evenly a priming/tack coat with bitumenous primer (Paving bitumen) @ 5 Kg/10 Sqm complete all as specified and directed.

Scarifying or picking gravelled, macadam or bituminous macadam surfaces in area not exc 400 sqm each exc 50 mm and n exc 100 mm deep complete all as specified and directed.

M&L for (Except Materials) WBM 7.5 cms thick compackted thickness WBM with broken stone aggregate (ganite, trap or basalt stone etc) of grading 2 (63 to 40 mm size, spread rolled with 8 to 10 ton power roller and consolidated to required gradient complete all as specified and directed. Note - WBM shall be done in patches

Removal of excavated material exc 250 m and deposited where directed at a level n exc 500 m above the starting point complete all as specified and directed.

Removal of old damaged cat eye from the road surface complete all as specified and directed.

Demolition of cement concrete(PCC tiles) as in ground floor and paving n exc 0.15 cm thickness (Below or avove the ground level) complete all as specified and directed.

M&L brick work with fly ash old size bricks laid dry, laid on edge in floors or road side complete all as spefied and directed.

Tridev Construction Company

High Tech Metal India

Maa Vaishno Enterprises

M/S Juneja Construction Pvt Ltd