Development of Green Strips Along Major Roads 2025-26.

Providing and laying HDPE Pipe confirming to IS:4984(as amended) suitable for respective working pressure with all the fittings and acessories e.g coupling, tees, bends reducers,screwed adaptors ,flanged, etc. jointing with any dia. pipe including trenching, refilling & testing of joints complete as per direction of Engineer-in- Charge. 160 mm pipe PN 10 PE100 of make Duraline/Supreme/Dinesh/Astral/Jain or equivalent.

Providing and laying HDPE Pipe confirming to to IS:4984 (as amended) suitable for respective working pressure with all the fittings and acessories e.g coupling, tees, bends reducers,screwed adaptors ,flanged, etc. jointing any dia. pipe as per manufatcurer's instructions including trenching, refilling & testing of joints complete as per direction of Engineer-in- Charge. 90 mm pipe PN 10 PE100 of make Duraline/Supreme/Dinesh/Astral/Jain or equivalent.

Providing and laying HDPE Pipe confirming to to IS:4984 upto amended suitable for respective working pressure with all the fittings and acessories e.g coupling, tees, bends reducers,screwed adaptors ,flanged etc. jointing any dia pipe as per manufatcurer's instructions including trenching, refilling & testing of joints complete as per direction of Engineer-in- Charge. 63 mm pipe PN 06 PE100 of make Duraline/Supreme/Dinesh/Astral/Jain or equivalent.

Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge. Nominal concrete 1:4:8 or leaner mix (including equivalent design mix)

Subsurface Utility Engineering (SUE) Survey Conducting SUE Survey in a corridor of 4-6 meter width to detect buried utilities like pipes, cables etc. in such corridor. Marking of the detected utilities on the map of corridor with information of locations and depths to the top of various utilities detected. Onsite detection to be conducted using minimum tools of Electronic Pipe Locator (EPL) and Ground Penetrating Radar (GPR). GPR work to be conducted using 500MHz and 300MHz antenna for best possible resolution and penetration. The specifications are SUE survey should be in accordance with 'Code of Practice for Subsurface Utility Engineering Suiting Indian Conditions Guidelines & Specifications for Detection, Verification & Depiction of Existing Subsurface Utility Data'. Road crossings without dividers and upto 60 m width)

Subsurface Utility Engineering (SUE) Survey Conducting SUE Survey in a corridor of 4-6 meter width to detect buried utilities like pipes, cables etc. in such corridor. Marking of the detected utilities on the map of corridor with information of locations and depths to the top of various utilities detected. Onsite detection to be conducted using minimum tools of Electronic Pipe Locator (EPL) and Ground Penetrating Radar (GPR). GPR work to be conducted using 500MHz and 300MHz antenna for best possible resolution and penetration. The specifications are SUE survey should be in accordance with 'Code of Practice for Subsurface Utility Engineering Suiting Indian Conditions Guidelines & Specifications for Detection, Verification & Depiction of Existing Subsurface Utility Data'. Along the Road , 6 m wide corridor

Horizontal Directional Drilling for HDPE/PE Ducts/Pipes Installation of HDPE/PE product pipe by HDD method including preparing and setting up the plant and equipment, making string of new pipe-work material, installing new pipe string and making the system ready for commissioning by HDD operation except sewer line and pipe pressure mains installation. Including, all related civil and mechanical works ke excavation, shoring/ strutting, etc. drilling, stringing, reaming, and pulling back the new pipe-work on the designed bore path alignment, proper disposal of drilling fluid and back fill after completion all inclusive as per IndSTT:101-2022: Code of Practice for Horizontal Directional Drilling Technique suiting Indian Conditions. HDPE pipes upto 110 mm dia in soft soil

Providing & laying of 16 mm/30cm/2lph PC surface/sub-surface HDPE dripline of make Netafim/Captain/Dinesh/Donga/Jain or equivalent. confirming to IS: 13488 upto amended, Pressure-compensating range: 0.5-4.0 bar through which Precise and equal amounts of water are delivered over a broad pressure range, 100% uniformity of water and nutrient distribution along the lateral. Dripline have large filter in each dripper, Recommended filtration: according to drippers flow rate, Double TurboNet: Ladyrinthb with large water passage. The water is drawn into the dripper from the stream center, preventing the entrance of sediments into the drippers, including trenching, refilling & testing of joints complete as per direction of Engineer-in- Charge.

Providing & laying of 16 mm plain HDPE Lateral pipe line of Grade PE 25 of make Netafim/Captain/Dinesh/Donga/Jain or equivalent, confirming to IS 12786 (as amended) complete as per direction and entire satisfaction of engineering in charge.

Providing & Fixing of button driper 2-4 LPH of make Netafim/Captain/Dinesh/Donga/Jain or equivalent including fixing with necessary arrangements in dripline complete as per direction and entire satisfaction of engineering in charge.

Providing & Fixing of 3/4" PP Quick coupling valve of make Harit/Aqua/Rain Spa or equivalent having one piece solid PP construction for durability including stainless steel spring, PP valve, Drain hole in body to minimize debris collection, grommet, auto close lid when not in use and cover made of thermo plastic elastometer complete as per direction and entire satisfaction of engineering in charge.

Providing & Fixing of 3/4" PP Key of make Harit/Aqua/Rain Spa or equivalent with handle and of 3/4" outlet complete as per direction and entire satisfaction of engineering in charge.

Providing & Fixing of 3/4" PP QCV Key swivel elbow of make Harit/Aqua/Rain Spa or equivalent, complete as per direction and entire satisfaction of engineering in charge.

Providing & Fixing of Metallic Service Saddle 90/63 mm X 3/4" plain/threaded of make Harit/Aqua/Rain Spa or equivalent, complete as per direction and entire satisfaction of engineering in charge.

Providing & Fixing of PP Service Saddle of 90 mm x 2" of make Harit/Aqua/Rain Spa or equivalent, having required pressure up to PN 16 kg/cm2 as per ISO : 1452 complete as per direction and entire satisfaction of engineering in charge.

Providing & Fixing of 2" Brass Quick Pressure relief valve of make HARIT/AQUA/ARMAS/Barmad/Netafim or equivalent along with bypass arrangement, cover & necessary fittings. It shall be adjustable Pressure setting from 22 PSI - 120 PSI for maximize performance. It should be in high strength body, Stainless Steel shaft, strength and corrosion resistant and feature of oil tempered coil spring which provides quick response for individual pressure range.

Providing & Fixing of 2" aluminum double acting Continuous Air release valve of make HARIT/AQUA/ARMAS/Barmad/Netafim or equivalent. The Continuous Air release valve shall be capable of both releasing and admitting air from and into the line during system operation. The working pressure shall be 10 Bars and testing pressure shall be 16 Bars omplete as per direction and entire satisfaction of engineering in charge.

Providing & Fixing of 2" plastic double acting Air release valve of make HARIT/AQUA/ARMAS/Barmad/Netafim or equivalent made of high strength plastic with fiber glass reinforced . The Air release valve shall be capable of both releasing and admitting air from and into the line. The working pressure shall be 10 Bars and testing pressure shall be 16 Bars complete as per direction and entire satisfaction of engineering in charge.

Providing & Fixing of Valve box of make K-Rain/HlT/Rainspa or equivalent 12" Round/rectangular with cover. The valve boxes shall have high strength, high density polyethylene constructed material. It should be UV stabilizer with anti oxidants, resistant to moisture complete as per direction and entire satisfaction of engineering in charge.

Providing & Fixing of Valve box of make K-Rain/HlT/Rainspa or equivalent 6" Round/rectangular with cover. The valve boxes shall have high strength, high density polyethylene constructed material. It should be UV stabilizer with anti oxidants, resistant to moisture complete as per direction and entire satisfaction of engineering in charge.

Providing & Fixing hydrocyclone filter unit of make HARIT/AQUA/ARMAS/Amiad/Filtomat or equivalent including mounting base and accessories. complete as per direction and entire satisfaction of engineering in charge.

Providing & Fixing of AquaDisc Fully Automatic Disc Filter of make HARIT/AQUA/ARMAS/Amiad/Filtomat or equivalent with 3″ grooved/flanged inlet/outlet, dual filter capacity of 50 m³/hr each (total 100 m³/hr), 130-micron disc filtration, polymeric corrosion-resistant body, max. operating pressure 10 bar, automatic backflush via differential pressure/timing/manual with low water consumption (~12 m³/hr/filter), FILTER SMART controller with 6V/12V DC input and battery backup, suitable for surface water irrigation and landscape applications, including mounting base and accessories. complete as per direction and entire satisfaction of engineering in charge.

Providing & Fixing of Pressure Guage (glycerine filled) of make HARIT/AQUA/ARMAS or equivalent having 2" Dial, with suitable thread Size BSP Male, Standard Version complete as per direction and entire satisfaction of engineering in charge.

Providing & Fixing of 2'' Size Water Flow meter of make HARIT/AQUA/Bermad or equivalent, Flow meters shall be the latest “state-of-art” microprocessor based electromagnetic type, having flanged connections with integral sensor, transmitter, processor & indicator suitable for measurement of water flow. Water contains silt and sand particles. Meters shall be lined with Polyurethane (PU) liners complete as per direction and entire satisfaction of engineering in charge.

Providing & Fixing of 3" BSP Solenoid valve of make K-Rain, USA/Rain Spa, ltaly/HIT, USA/Hydromat/Aqua or equivalent, made with Nylon Glass Filled, with flow control which shall be normally closed at 24 VAC 50/60 cycle solenoid actuated angle pattern design. The valve pressure rating shall not be less than 12 bar. The valve body shall be constructed of high- impact, weather-resistant Nylon Glass Filled with heavy duty diaphragm and stainless steel screws, fasteners and components. The valve shall have manual open/close control (internal bleed) for manual opening and closing of valve without electrically energizing the solenoid, manual bleed can be removed for " tamper proof" operation. The valve shall operate with minimum 24 VAC at 12.0 bar. The valve must open or close in less than 1 minute at 10.5 bar, and less than 30 seconds at 0.7 bar. The valve construction shall provide for all internal parts to be removable from the top of the valve without disturbing the valve installation complete as per direction and entire satisfaction of engineering in charge.

Providing & Fixing of Site Master Controller of make K-Rain, USA/Rain Spa, ltaly/HIT, USA or equivalent with two wire, Decoder Based technology( 99 Station) having six programs with six start times per program with run time per station 0-10 hrs and irrigation water budget by program 0-250%, capable of running two program simultaneously with two nos. of maximum valves plus master valve running simultaneously and should have rain sensor capability complete as per direction and entire satisfaction of engineer-in-charge.

Providing & Fixing of Single Station Decoder of make K-Rain, USA/Rain Spa, ltaly/HIT, USA or equivalent, having IP-68 weather proof casing wire modules rated at 20 KV Surge Protection, make Toro (USA) / Irritrol (USA) / Perrot(Germany) or equvalent, complete as per direction and entire satisfaction of engineering in charge.

Providing & Fixing of Line Surge Protection unit of make K-Rain, USA/Rain Spa, ltaly/HIT, USA or equivalent for 2-wire path and must be properly surge protected to the decoders and irrigation system and also significantly reducing troubleshooting and repair time of Irrigation System, complete as per direction and entire satisfaction of engineering in charge.

Providing & Fixing of 5/8" dia and 8' feet long Copper Clad Grounding Rod & Clamp of make K-Rain, USA/Rain Spa, ltaly/HIT, USA or equivalent including fixing in earth as per requirement for protection of Decoder Controller & LSP etc., complete as per direction and entire satisfaction of engineering in charge.

Providing & Fixing of DBR Connectors of make K-Rain, USA/Rain Spa, ltaly/HIT, USA or equivalent, pre filled, low voltage, dry splice, direct bury, water proof wire connector that protect electrical connection from corrosion and moisture. Each splice Kit contains Two wire nuts, water proof, Gel- filled housing and 1 dual splice organizer complete as per direction and entire satisfaction of engineering in charge.

Providing & Fixing of Pump Start Relay of make Pla/Siemens/Havells or equivalent fully compatible with all standard 24VAC controllers with compacted design and suitable for running of desired HP pump set complete as per direction and entire satisfaction of engineering in charge.

Providing & Fixing mild steel powder coated enclosure of make Pla/Automat/Havells or equivalent of approved colour for electrical equipment with suitable locking arrangements complying to IP 55 complete as per direction and entire satisfaction of engineering in charge.

Providing & Fixing of 2.5 sq mm double core copper conductor cable of make Emoire/Finolex/Plaza or equivalent 24 volt complete as per direction and entire satisfaction of engineering in charge.

Providing & Fixing of PVC Conduit Pipe 20mm dia of make AKG/Supreme/Finolex or equivalent for laying of electric wires including all fixtures and accessories etc. complete as per direction of engineer-in-charge.

Providing & Fixing of Compact Weather Station of make K-Rain, USA/Rain Spa, ltaly/HIT, USA or equivalent with sensor for monitors wind, rain, relative humidity, etc. having the features of shuts off the irrigation system as per weather conditions & Shuts down irrigation system when desired moisture level has been reached complete as per direction of engineer-in-charge.

Providing and fixing Hydropneumatic type Pumping Unit of make Kirloskar/Crompton/CRI/Lubi or equivalenthaving total discharge 10 LPS at 60 mtr. Head at Ground level, (2 working+1Standby), having discharge (5 Lps @ 60 Meter Head), 5 Lps @ 60 Mtr head, total pump = 3 Nos. complete. Along with PLC control panel with VFD, for providing low flow and pressure maintenance. The control panel should have a manually operated switch for the re- prime pumping. It should also have an input for the flow meter, and controls to operate the existing auto-flush wye strainer and Filter. Pressure transducer point included, sensor leads from suction header, cables from panel to motors . Providing and fixing 2' Delivery & Header pipe, fittings & accessories, with Non Return Valve, Isolation Butterfly Valve, Pressure Guage, pressure transducer & Water Level Controller complete as per direction and entire satisfaction of engineering in charge. (Total 3no. pumps in each pumping unit)

Earth work in surface excavation not exceeding 30 cm in depth but exceeding 1.5 m in width as well as 10 sqm on plan including getting out and disposal of excavated earth upto 50 m and lift upto 1.5 m, as directed by Engineer-in- Charge: All kinds of soil

Earth work in excavation by mechanical means (Hydraulic excavator)/ manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and for all lift, as directed by Engineer-in-charge. All kinds of soil

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level - 1:5:10 (1 cement : 5 manufactured sand derived from Recycled Concrete Aggregate (RCA) : 10 graded stone aggregate 40 mm nominal size Recycled Aggregate (RA) )

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:2:4 (1 cement : 2 coarse sand (zone-III) including manufactured sand derived from Recycled Concrete Aggregate (RCA) upto 25% : 4 graded stone aggregate 20 mm nominal size including Recycled Concrete Aggregate (RCA) upto 25%)

Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. Hot finished seamless type tubes

Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-Charge) of total coated thickness 0.50 mm (base metal of minimum 0.45 mm thickness with total coating thickness of 0.05mm) with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer onboth side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.

Operation and maintenance of existing smart drip irrigation system, for a period of 02 years (after the successful completion of defect liability period of 01 year) with sufficient technical staff. The service includes smooth operation, monitoring and upkeep of the entire system through 02 visits per week by a trained technician. During these visits, the technician shall ensure proper operation and functioning of the overall system such as cleaning of filters, driplines, minor repair and adjustments as per direction and entire satisfaction of engineering in charge. The charges shall be inclusive of all costs such as labour, transportation, minor adjustments, etc. and all applicable taxes including GST. The operation & maintenance during the defect liability period of 01 year for the smart irrigation system must be carried out by the agency for which no charges shall be paid by the department.

Providing and fixing submersible pump of capacity 10HP, 3 phase, suction and delivery of 100 x 160mm, 3 core copper water proof submersible cable upto 60m length with stainless steel pump shaft having discharge 10 LPS complete as per direction and entire satisfaction of engineering in charge.

Providing and fixing HDPE 2" Delivery & Header pipe including fittings & accessories (Tees, Sockets, Unions, Elbows etc.), 50mm Gun Metal Non Return Valve, PP Isolation Butterfly Valve, Pressure Guage upto 10 bar, pressure transducer and Water Level Controller complete as per direction and entire satisfaction of engineering in charge. (set of 3nos. for each pump)

Please Enable Macros to View BoQ information