PROVN OF CHAIN LINK FENCING FROM FD WKSP COY EME TO SHORT RANGE AT LHOU GOMPA (LG) UNDER AGE (I) TAWANG

Amount

Excavation in post holes (or similar holes) each not exc 0.5 Cum, getting out, returning filling in and ramming earth or broken rubble mosed with earth around, in layers not exceeding 25cm, watering and removing surplus soil to a distance n.exc 50M and making good surface and getting out hard/dense soil, complete all as specified and directed.

M&L Plain cement concrete (1:2:4) type D-2, using 40mm graded crushed stone aggregate as in foundations, filling and mass concrete complete all as specified.

S&F for hand rails, half round or other steel section or core for wooden hand rail straight portion, drilled and countersunk for balusters running bars, for doors, blusters, nosing to steps including embeding in concrete and screwing etc, wind ties for roof including securing bolts, posts and struts in fencing including cutting tops to shape as directed, drilling holes notching for wire etc including all necessary drilling, bolting or riveting etc and similar work conforming to Fe-290 Gde E-165 , all as specified and directed.

Supply of chain link MS galvanised fencing any size or type, all as specified and directed.

Fixing only chain link fencing icluding line wires any mesh, size and type to any type of standards rails, straining bolts, etc including provision of binding wire, all as specified and directed.

S&F for galvanised, 2 strand steel barbed wire 2.24 mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including securing tying at crossings with and provision of galvanised mild steel wire, staples or steel wire, staples or steel pins as directed (each line wire to be measured).

Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, n. exc. 5 cm long, Dia of bolt 12mm all as specified and directed.

S&F of round bars 10mm dia and over cut to length bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire not lesses than 0.90mm dia or securing with clips quality conforming, all as specified and directed.

M&L for prepration of new steel surfaces of any description, exceeding 10cm in width or girth, and applying two coat of synthetic enemel paint over a coat of red oxide primer, complete all as specified and directed.

M&L for prepration of new steel or iron surfaces of any description, n.exc 10cm in width or girth not otherwise described and applying two coat of synthetic enemel paint over a coat of red oxide primer, complete all as specified abnd directed.

M&L for surfaces of any description and treated with two coat of black bituminus paint exe 10 cm in width or grith. Complete all as specified and directed.

DEOGRATIES SEMPER AMA ASSOCIATE

M/S D L ENTERPRISES

M/S KESANG CONSTRUCTION

M/S RINCHIN DORJEE CONSTRUCTION

TENZIN CONSTRUCTION

MS TD CONSTRUCTION

T T ENTERPRISES