Renuvation of Gate no. 1, 2, 3 and Toilet of Room no.F2, F8, G3, G15 and G16 at Dr. Ram Manohar Lohiya Transit Hostel Telibagh, Lucknow. (Lot 05)

Amount

Dismantling old plaster or skirting racking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50m lead.

Dismantling brick work or stone work in lime or cement mortar and including stacking of materials as directed by the Engineer-in-charge with in a distance of 60 meters(200ft.)

Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead. For thickness of tiles 10 mm to 25 mm sqm 60.50

Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge. Nominal concrete 1:4:8 or leaner mix (i/c equivalent design mix)

Dimantling Doors Windows and clerestory windows (steel or wood) shutter including chaukhats, architrave holdfast etc complete & stacking with in 50 mtrs lead of area 3 Sqm and below

Brick work with common burnt clay ( Non Modular) bricks of class 150 in Foundation and plinth in cement mortar 1:4( 1 Cement : 4 Coarse sand)

Brick ballast (b) class 150 brick ballast 40 mm gauge

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering all work up to plinth level 1:4:8 (1 cement : 4 coarse sand (Zone-III) : 8 graded stone aggregate 40 mm (nominal size)

Centering and shuttering including strutting, propping etc, and removal of form work for columns piers, abutements, pillars, posts and struts

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. Mild steel and Medium Tensile steel bars

Steel work welded in built up sections/framed work including cutting, hoistin, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works

Providing and fixing angle iron frames for doors, windows and ventilators of mild steel Angle sections of size 35x35x5 mm, joints mitred and welded by angle iron 35x35x5 mm or 35x 5 mm flat pieces to the existing T-iron frame or to the wall with dash fastener, including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer, all complete as per the direction of Engineer-In-charge.

Providing and laying cement concrete in retaining walls, return walls, walls (anythinckness) including attached pilasters, colums, piers, abutments pillars posts, struts, buttresses, string or lacing courses, parapets, coping bed blocks, anchor blocks, plain window sills, sunken floor etc, up to floor five level, excluding the cost of centering, shuttering and finishing 1:1.5:3 (1 cement : 1.5 couarse sand (zone-III) 3 graded stone aggregate 20 mm (nominal size)

Providing and Laying 12 mm thick cement Plaster 1:4 with cement and coarse sand mortar complete

Providing of Machine cut, mirror/eggshell polished, ceremic wall tiles work for wall linning including dado, skirting, risers of steps etc, in required desigh and pattern wherever required, stones of different finised surface texture. 15mm thic composit grenite/ ceremic wall tiles (Size 800x2400 mm) stone slab, perlato, rosso verona, fire red of dark Emperadore etc, (Guartz white 24/ASTRA WHITE 24/QUARTZ CREMA 24) (water Absorption-av.0.08<E<3%, Individual 3.3 max) Thicnes 15.0 mm, Rectengularity + 0.1%, breaking strength in N-1100, surface Quality- min 95% of tiles will be free from visible defects, Including carriage of Tiles (at site) with loading & unloading charges etc.

Extra for fixing marble/granite stone, over and above corresponding basic item, in facia and drops of width upto 150 mm with epoxy resin based adhesive, including cleaning etc. complete

Providing edge moulding to 18 mm thick marble stone counters, Vanities etc., including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge. Granite work

Providing and fixing concertina coil fencing with punched tape concertina coil 600 mm dia 10 metre openable length ( total length 90 m), having 50 nos rounds per 6 metre length, upto 3 m height of wall with existing angle iron 'Y' shaped placed 2.4m or 3.00 m apart and with 9 horizontal R.B.T. reinforced barbed wire, stud tied with G.I. staples and G.I. clips to retain horizontal, including necessary bolts or G.I. barbed wire tied to angle iron, all complete as per direction of Engineer-in-charge, with reinforced barbed tape(R.B.T.) / Spring core (2.5mm thick) wire of high tensile strength of 165 kg/ sq.mm with tape (0.52 mm thick) and weight 43.478 gm/ metre (cost of M.S. angle, C.C. blocks shall be paid separately)

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes,having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge15 mm dia pipe

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes,having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge 20 mm dia pipe

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes,having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge 100 mm dia pipe

Providing and laying water proofing treatment in sunken portion of WCs, bathroom etc., by applying cement slurry mixed with water proofing cement compound consisting of applying : (a) First layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/ sqm. This layer will be allowed to air cure for 4 hours. (b) Second layer of slurry of cement @ 0.242 kg/sqm mixed with water proofing cement compound @ 0.126 kg/sqm. This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours. (The rate includes preparation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry.)

Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.

Providing and laying Vitrified tiles in floor in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only . Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily. Size of Tile 600 x 600 mm

Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws

Providing and Fixing Brass 100 mm mortoice latch and lock with 6 levers without pair of handles ( best make of approved quality) for alluminium doors including necessary cutting and making good etc. complete

Providing and fixing aluminium round shape handle of outer dia 10 mm with SS screw etc. complete as per direction of Engineer in Charge. Powder coated minimum thickness 50 micron aluminium.

Providing and Fixing of CP Angle Valve of Besin Mixer and Gyser point of approved quality 15 mm nominal bore

Providing and fixing unplasticised P.V.C. connection pipe with PTMT Nuts, collar and bush of approved quality and colour 15 mm nominal bore with 45 cm length.

Providing and fixing C.P. Brass extension nipple (size 15mmx50mm) of approved make and quality as per irection of Engineer-in-charge.

Providing and fixing C.P brass shower rose with 15 or 20 mm inlet 100 mm diameter

Providing and fixing C.P brass long nose bib cock of approved quality conforming to standards and weighing not less than 810 gms 15 mm

Providing and fixing C.P brass stop cock (concealed) of standard dersign and of approved make conforming to IS:8931 15 mm nominal bore

Providing and fixing wash basin with C.I. brackets, 15 mm dia CP Brass single hole basin mixer of approved quality and make, including painting of fittings and brackets, cutting and making good the walls wherever required:- (a) White Vitreous China Wash basin size 550x400 mm with a 15 mm CP Brass single hole basin mixer

Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete

Providing and fixing vitreous china dual purpose closet suitable for use as squatting pan or European type water closet (Anglo Indian W.C pan) with seat & lid fixed with C.P. brass hinges and rubber buffers, 10 litre low level flushing cistern with fitting and brackets, 40 mm flush bend, 20 mm over flow pipe, with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required: White vitreous china dual purpose WC pan with white solid plastic seat and lid with white vitreous china flushing cistern and C.P. flush bend.

Providing & fixing float glass panes 6.0 mm thick glass panes

Providing fixing 50 mm Core thickness Puf panel use for wall & Roof

Rajesh Kumar (BID ID -5468683)