Construction of R.C.C. Frame structure with Brick work boundary wall at HAL Township Kanpur

TECHNICAL BID Appendix ‘A’

NAME OF WORK: Construction of R.C.C. Frame structure (with Brick work) boundary wall at HAL Township Kanpur. CA. No. MW/CIV/988/1/25-26

PRE-QUALIFICATION DETAILS OF APPLICANTS

Note: May Enclose a separate sheet along with Annexures name and Enclosure No., if space provided below is not sufficient. Write the details in the yellow shaded portion only.

Section 1: Applicant’s Particulars

Name of the Individual / Firm / Company:

Constitutional or Legal Status of the firm

Registration Number From ROC (If any): Registering Authority Date of Registration

Registered Address:

Contact Person Name & Designation:

Address for correspondence:

Tel. No. Fax No.

Mobile No. Email Address:

(This declaration should be completed by a proprietor, partner, director or other senior manager who has the authority to do so.)

‘I accept the HAL terms & conditions for this contract and declare that the particulars shown herein are true & correct in every detail.’

Signature : …………………………………………

Details of persons holding the power of Attorney [If different from above]

(Attach, attested copy of Notarized Power of Attorney)

Name…..………………………… Tel. No. (……..) ………………… Mobile No.……………………Position: ………………………

Note:-Tenderer are requested to download and upload this page after signing.

Section 2: Applicant’s Profile

2.1(a) Type of Ownership: (Write' Yes' in the appropriate Box)

(i) Individual / Partnership (iii) Pvt. Ltd. / Public Ltd.

(ii) PSU / Govt. Undertaking (iv) Research Institute / Trust

Others, please specify

2.1(b) Registration of the Firm is available with:

Company Registration Number Dated Validity Value of Contract for which Registered Class / Type of Registration

HAL or its Division

Central/State Govt.

Others (if any) (Specify).

Upload necessary certificates from the registering authorities (with Enclosure No.).

2.2 List the names of Owners / Partners / Promoters and Directors/Company Secretary / Holder of power of Attorney, as applicable, in the format detailed below (If space below is not sufficient,then upload additional sheet with enclosure No.)

Name of the owners/ Partners/ Promoter & Directors / Company Secretary/Holder of power of Attorney Address Whether owner/ Partners/ Promoter & Directors / Company Secretary/Holder of power of Attorney Extent of share holding in the Firm/Company as the case may be

2.3 Qualifications and Experience of key Management and Technical Personnel. (Upload biographical data with enclosure No.)

Position Name Qualifications Years of Experience (general) Years of Experience in the position of assignment Membership of Professional bodies associations etc.,

2.4 Company’s Total Technical personnel by Discipline:

Discipline Number of Personnel Discipline Number of Personnel

Graduate Civil /Electrical/Structural Engineers / Architect

Diploma Civil/Electrical Engineers

Sanitary Engineers

Total Personnel Total Personnel

2.5 Company’s Memorandum of Association and Articles of Association to be enclosed. Board resolution paper may be enclosed along with the memorandum of association. (Write Enclosed/Not Enclosed)

Section 3: Financial Details

3.1 Bank(s) details:

Will you authorize your Bank/s to supply HAL with a reference as to your financial position, if required? (Write Yes / No opposite in Box)

Name of Bank (Scheduled Commercial Bank) & Branch

Name and Designation of Contact person:

3.2 Give a list of work with contracts value of similar nature over the last seven years (From 01.04.2019 to 30.03.2026) in the following format starting with maximum value and in descending order. (Attach seaparate sheet in the same format if space below is not sufficient with Enclosure no.and upload it).

Project Name Name of Employer Description of work Contract No. Value of construction (Rs. In Lakhs) Date of issue of work order Stipulated period of completion Actual date of completion

3.3 Attach the following audited financial statements as applicable, for the past three financial years ending 31-03-2025 and write the values in the appropriate column as confirmation of having enclosed the appropriate documents with the application.

Profit/Loss Statement

Balance sheet (Write Enclosed/Not Enclosed)

3.4 Information on litigation history, in which the Bidder is involved (Write Yes / No in Col. 5).

Other party (ies) (Dispute involved with) Name of Employer Cause of dispute Amount involved. Remarks showing present status.

Write Details Attached / Not attached (if Yes).

3.5 In the last 5 years, has your firm, or any firm with which any of your company’s owners, officers, partners were associated, been debarred, disqualified, removed, blacklisted or otherwise prevented from bidding or completing any contract? (Write Yes / No).

If yes, state the project and the basis for the action.

3.6 At any time in the last five years, has your firm been assessed for and paid liquidated damages after completion of a project under a construction contract? (Write Yes / No ).

If yes, give details in following format:

Project Name Name of Employer and Address Date of Completion of The Project Amount of Liquidated Damages (In Rupees) Other information necessary to fully explain the assessment of liquidated damages (Write Attached / Not Attached).

Scheduled Actual Assessed Paid

Write Details Attached / Not attached

3.7 Is the individual / sole proprietor / any partner / directors of company: Put Yes / No (As Applicable)

(a) Dismissed Government Servant

(b) Removed from approved list of Construction agency

(c) Demoted to a lower class of Construction agency

(d) Having business banned / suspended by any Government in the past

(e) Convicted by a court of law

(f) Retired engineer / official from engineering department of Govt. of India within last two years.

(g) Director or partner of any other company / firm enlisted with CPWD or any other department

(h) Member of parliament or any state Legislative assembly

3.8 Please furnish the documentary proof/details of the following [Write Documentary Proof/details Enclosed/Not Enclosed]

a) Copy of PAN / GIR No. Registration Certificate issued by income Tax Authority

b) Certificate of GSTIN

c) Income Tax Returns for the last three years

d) Plant & Machinery details for the work

e) Proposed work completion schedule in the form of bar-chart

f) Bank balance statement for the last three months

g) Overdraft facilities available with the agencies

h) Balance sheet for the last five years

Section 4 – Pre-qualification Category

4.1 Solvency for a minimum value of Rs. 114.27 Lakh issued within a period of 12 months from the final date of submission of tender. i.e on or after 29.03.2025. (Upload It with enclosure No.)

Name of Bank & Branch Bank’s Reference and Date Value Rs. In Lakh

4.2 Annual turnover in the past 3 years ending 31-03-2025.

Note:- The annual turnover should be supported with audited financial statements of the concerned year with UDIN no. The average annual turnover for the last three years (starting from 2022-23 onwards) as above should not be less than 30% (Thirty) (Rs. 85.70 Lakh) of the estimated cost as indicated in the tender document. It is mandatory to furnish all the three year annual turnovers failing which tender are liable to be rejected.

Year Annual Turnover (Rs. In Lakh) Average Annual Turnover for last three Years ( Rs. In Lakh)

4.3.Bid-Capacity calculation of The Firm-The bid capacity shall be worked out as one of their eligibility criteria. Price Bid shall be opened only for those bidders who are found to have the available bid capacity more than the total bid value. [Amount put to tender shall be considered as required bid value]. The bid capacity shall be worked out as (Bid-Capacity= 2*A*N-B);

Where, A = Maximum Annual Turn-over in last Five Years escalated at current level @ 10% per annum.

B = Existing commitments on hand during the currency of the present contract.

In order to calculate (B), the firm has to furnish the details of work in hand for upto year ending on March - 2026 in the following format; (May enclose in a separate sheet in the same proforma, if space below is not sufficient and upload it with enclosure no.). Concealment of any information are liable for rejection.

Sl.No. Name of the work in hand Amount put to tender as per NIT Amount of contract Date of agreement Agreed date of completion Probable date of completion Agreed progress March - 2026 (In % age of Completion) Actual progress till March - 2026 (In % age of Completion) Name of Organizationwith address

Note:- (i) Not to change the proforma given above. Any change in above proforma is liable for rejection of tender.

(ii) Please furnish Work–order in support for the work in hand.

4.3 (a) Annual turnover in the past 5 (Five) years ending 31.03.2025 or Bid-Capacity Calculation.

Note:- The annual turnover should be supported with audited financial statements of the concerned year.

Year Annual Turnover (Rs. In Lakh)

4.4 Experience details [Proof may be uploaded also]

Experience of having successfully completed similar works during last seven (07) years (From 01.04.2019 to 30.03.2026) should either of the following. (a) ONE similar completed work costing not less than 80% Rs. 228.54 Lakh of the amount put to tender.

S. No. Name of the Work Date Of Completion Completed Cost(INR In Lakh) Completion Certificate [Mandatory] Write Enclosed / Not Enclosed Name, address & Phone no. of the client

Note: Completion certificate issued by the client should contain value of the work, date of completion duly supported by agreement copy & work order copy .TDS certificate is to be enclosed in case the client is a private firm. Tender offer shall be liable for REJECTION if the tenderer has not furnished the Completion certificate.

(b) TWO similar completed works costing not less than 50% Rs.142.84 Lakh of the amount put to tender

S. No. Name of the Work Date Of Completion Completed Cost(INR In Lakh) Completion Certificate [Mandatory] Write Enclosed / Not Enclosed Name, address & Phone no. of the client

Note: Completion certificate issued by the client should contain value of the work, date of completion duly supported by agreement copy & work order copy. TDS certificate is to be enclosed in case the client is a private firm. Tender offer shall be liable for REJECTION if the tenderer has not furnished the Completion certificate.

(c) THREE similar completed works costing not less than 40% Rs.114.27 Lakh of the amount put to tender

S. No. Name of the Work Date Of Completion Completed Cost(INR In Lakh) Completion Certificate [Mandatory] Write Enclosed / Not Enclosed Name, address & Phone no. of the client

Note: Completion certificate issued by the client should contain value of the work, date of completion, duly supported by Work-order copy & agreement copy. TDS certificate is to be enclosed in case the client is a private firm. Tender offer shall be liable for REJECTION if the tenderer has not furnished the Completion certificate.

Similar Works- Experience in carrying out All types of Civil works at shall be considered as similar works.

4.5. I/We declare and confirm that -

a. All information and attachments submitted in this application are true and correct.

b. I/We are aware that any false information provided herein will result in the rejection of my application and suspension of any registrations granted.

c. I/We shall not make refund claims of expenditure incurred in processing this application.

4.6 I/We enclose herewith a pay order / banker’s draft number: drawn on Bank:

for Rs. as EMD for Tender.

Branch & address Name

Date: Designation:

Signature of Applicant / Contractor holding power of attorney

Note:-Tenderer are requested to download and upload this page after signing.

HINDUSTAN AERONAUTICS LIMITED ACCESSORIES COMPLEX TRANSPORT AIRCRAFT DIVISION, KANPUR CIVIL WORKS DEPARTMENT

NAME OF THE WORK: Construction of R.C.C. Frame structure (with Brick work) boundary wall at HAL Township Kanpur. CONTRACT NO. MW/CIV/988/1/25-26

PRICE BID (Schedule A Bill of Quantity )

Name of the Tenderer:

Sl. No Specification Qty. Unit Rate in Figs [Excluding GST & Welfare cess] Rate in words Amount

1 The work in general shall be carried out as per CPWD DAR 2023. For item of works not covered in the CPWD DAR shall be governed as per BIS specification or as per Sound Engineering practice or as specified and directed by the EIC.

2 Contractors shall inspect the site and fully acquaint himself / themselves with the scope and nature of work, access, location and working condition. No claim will be considered later on the ground of ignorance or otherwise of the conditions under which the work will be have to be executed.

3 This BOQ specifications have to be read in conjunction with detailed technical specification and tender drawings if any.

4 The tenderer has to quote percentage above / below against the total amount considering the specified standard rates. If the contractor does not quote any percentage above / below on the total amount, the tender shall be treated as invalid and will not be considered.

5 The quoted percentage for the works mentioned below, shall be taken into consideration for evaluation of the tender. The lowest offer (L-1) will be determined considering the total amount including GST & Welfare cess based on the quoted percentage. HAL shall process the bills of contractor for executed work exclusive of GST & Welfare cess. In addition, payment towards GST & Welfare cess as applicable shall be made to the contractor along with the bills as per Bill Amount. The GST & Welfare cess paid by HAL shall be deposited to the concerned Govt. authority by the contractor regularly. Any other tax (as applicable) as imposed by the Govt. on the contract shall be borne by the contractor.

6 Contractors will be solely responsible for any accidents to workmen engaged by them during execution of work.

7 All materials required for the work will be contractors own supply. They shall conform to relevant IS standards and shall be of approved brand /manufacture as specified. If the specified brand/manufacture not available, then only alternative equivalent brand may be produced for approval. However, prior approval of HAL shall be taken before procurement of any material.

8 Any plant and machinery required are contractors own supply. No plant and machinery will be issued by HAL.

9 All the items shall be carried out as per the Specifications and as directed and approved by EIC.

10 The cement used in the work shall be of approved makes such as Jay Pee, Birla, ACC, Prism, Mycem or equivalent as approved by EIC.

11 Rate shall be inclusive of work at any height / level, lead & lift and staging, scaffolding etc.

12 Name & Address of the firm must be filled in the yellow shaded portion on the top of the page

1 Demolishing/Dismentaling brick work manually/ mechanical means in cement mortar including stacking of serviceable material and disposal unserviceable material within 50 meters lead as per direction of Engineer-in-charge. 420.00 Cum 1731.26 Rupees One Thousand Seven Hundred Thirty One and Twenty Six Paise 727129.20

2 Earth work in excavation by mechanical means (Hydraulic excavator)/ Manual means in foundation trenches and drains (not exceeding 1.5m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, for all lift, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50m. All kind of soil etc. as per direction of Engineer-in-charge. 450.00 Cum 218.74 Rupees Two Hundred Eighteen and Seventy Four Paise 98433.00

3 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level PCC 1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources) etc. as per direction of Engineer-in-charge. 83.00 Cum 5724.37 Rupees Five Thousand Seven Hundred Twenty Four and Thirty Seven Paise 475122.71

4 Removing mortar from old bricks and cleaning the bricks including stacking with in a lead of 50 m ( stacks of cleaned bricks shall be measured) From brickwork in cement mortar etc. as per direction of Engineer-in-charge. 85000.00 Nos 5.63 Rupees Five and Sixty Three Paise 478550.00

5 Brick work with cement mortor (1:6) as per direction of Engineer-in-charge. Note - Bricks supplyed by departmentaly 165.00 Cum 3455.00 Rupees Three Thousand Four Hundred Fifty Five Only 570075.00

6 Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in Cement mortar 1:6 (1 cement : 6 coarse sand) etc. as per direction of Engineer-in-charge. 830.00 Cum 5993.49 Rupees Five Thousand Nine Hundred Ninety Three and Forty Nine Paise 4974596.70

7 Providing and laying of Reinforced cement concrete work (1:1.5:3) (1 cement : 1.5 coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources) in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement etc. as per direction of Engineer-in-charge. 520.00 Cum 9120.13 Rupees Nine Thousand One Hundred Twenty and Thirteen Paise 4742467.60

8 Providing and laying 12 mm avg. thickness cement plaster of mix CM 1:6 (1 cement: 6 coarse sand) work up to any height /depth on brick/ concrete surface of wall etc. as per direction of Engineer-in-charge. 10000.00 Sqm 288.78 Rupees Two Hundred Eighty Eight and Seventy Eight Paise 2887800.00

9 Supply & fixing Steel reinforcement ( Thermo mechenically treated bars of nay dia of approved make TATA/SAIL/KAMDHENU/VIZAG of grade Fe 500 D or more ) for R.C.C. work ready to use cut and bend rebars of approve make from factory / work shop to constrction site including placing in position and binding all complete above plith level / upto plith level etc. as per direction of Engineer-in-charge. 45850.00 Kg 83.74 Rupees Eighty Three and Seventy Four Paise 3839479.00

10 Providing and fixing centering and shuttering including strutting, propping etc. and removal of form for Foundations, footings, bases of columns, beam etc. for mass concrete etc. as per direction of Engineer-in-charge. 4470.00 Sqm 329.54 Rupees Three Hundred Twenty Nine and Fifty Four Paise 1473043.80

11 Supply and Fixing MS structural steel work riveted, bolted or welded in built up section trusses of approved make TATA/SAIL//VIZAG and framed work, including cutting, hoisting, fixing in position and applying a priming coat with two coat painting of approved steel primer all complete as per direction of Engineer-in-charge. 3300.00 Kg 112.35 Rupees One Hundred Twelve and Thirty Five Paise 370755.00

12 Providing and applying Acrylic Smooth Exterior Paint of required shade : (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 0.90 liter/10 sqm). All complete as directed & approved by EIC. 10000.00 Sqm 134.96 Rupees One Hundred Thirty Four and Ninety Six Paise 1349600.00

13 Providing and applying white cement based putty of average thicknes 1 mm, applied @ 1.45 kg/ sqm). of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per direction of Engineer-in-charge. 10000.00 Sqm 131.13 Rupees One Hundred Thirty One and Thirteen Paise 1311300.00

14 Earth work in excavation by mechanical means (Hydraulic excavator)/ manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and for all lift as directed by Engineer-incharge. All kinds of soil 800.00 Cum 149.16 Rupees One Hundred Forty Nine and Sixteen Paise 119328.00

15 Engagement of Hydraulic Excavator ( JCB ) for Excavation /loosing of Debris, shifting of excavated material (loose soil /rocks) including leveling & dressing where ever required, all complete as per direction of EIC. Note- Requirement of Excavator/JCB shall be as decided by EIC. 80.00 Hour 968.07 Rupees Nine Hundred Sixty Eight and Seven Paise 77445.60

16 Providing and fixing concertina coil fencing with punched tape concertina coil 600 mm dia 10 metre openable length ( total length 90 m), having 50 nos rounds per 6 metre length, upto 3 m height of wall with existing angle iron ‘Y’ shaped placed 2.4m or 3.00 m apart and with 9 horizontal R.B.T. reinforced barbed wire, stud tied with G.I. staples and G.I. clips to retain horizontal, including necessary bolts or G.I. barbed wire tied to angle iron, all complete as per direction of Engineer-in-charge, with reinforced barbed tape(R.B.T.) / Spring core (2.5 mm thick) wire of high tensile strength of 165 kg/ sq. mm with tape (0.52 mm thick) and weight 43.478 gm/ metre (cost of M.S. angle, C.C. blocks shall be paid separately) as per direction of Engineer-in-charge. Note- Sample got approved by EIC, before start of the work. 870.00 Metre 315.80 Rupees Three Hundred Fifteen and Eighty Paise 274746.00

17 Providing and Fixing fencing with angle iron post placed at required distance embedded in cement concrete blocks, every 15th post, last but one end post and corner post shall be strutted on both sides and end post on one side only and provided with horizontal lines and two diagonals interwoven with horizontal wires, of barbed wire weighing 9.38 kg per 100 m (minimum), between the two posts fitted and fixed with G.I. staples, turn buckles etc. complete. (Cost of posts, struts, earth work and concrete work to be paid for separately). Payment to be made per metre cost of total length of barbed wire used.with G.I. barbed wire etc, as per direction of Engineer-in-charge. 1500.00 Metre 18.57 Rupees Eighteen and Fifty Seven Paise 27855.00

18 Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth up to 30 cm measured at a height of 1 m above ground level and removal of rubbish up to a distance of 50 m outside the periphery of the area cleared. as per direction of Engineer-in-charge. 1600.00 Sqm 14.79 Rupees Fourteen and Seventy Nine Paise 23664.00

19 Felling dry trees of the girth (measured at a height of 1 m above ground level), including cutting of trunks and branches, removing the roots and stacking of serviceable material and disposal of unservisable material. Beyond 120 cm girth upto and including 240 cm girth etc. as per direction of Engineer-in-charge. 20.00 Each 9260.63 Rupees Nine Thousand Two Hundred Sixty and Sixty Three Paise 185212.60

Sub-Total (Excluding GST & Welfare cess) Rupees Two Crore Forty Lac Six Thousand Six Hundred Three and Twenty One Paise 24006603.21

The Tenderer has to Quote Percentage Above / Below as Specified and Percentage Shall be Quoted in Figures. Approximate Amount Put to Tender State Above or Below Quoted Percentage in Figures [Excluding GST & Welfare cess] Quoted Amount

Tenderer's Quote (Excluding GST & Welfare cess) 24006603.21 BELOW % 24006603.21

Add 18% GST Rupees Forty Three Lac Twenty One Thousand One Hundred Eighty Eight and Fifty Seven Paise 4321188.58

Add 1% Welfare Cess Rupees Two Lac Forty Thousand Sixty Six and Three Paise 240066.03

Grand Total (Including GST& Welfare cess) Rupees Two Crore Eighty Five Lac Sixty Seven Thousand Eight Hundred Fifty Seven and Eighty One Paise 28567857.82

Note: The tenderer has to quote percentage above / below against the total amount considering the specified standard rates. If the contractor does not quote any percentage above / below on the total amount, the tender shall be treated as invalid and will not be considered.

WARNING: PLEASE ENTER PERCENTAGE QUOTE

HINDUSTAN AERONAUTICS LIMITED

ACCESSORIES COMPLEX

TRANSPORT AIRCRAFT DIVISION

CIVIL WORKS DEPARTMENT

ISSUED TO MR/MESSRS. SCHEDULE ‘A’ BILL OF QUANTITIES Sub: “Construction of Oil & Lubricant/ Chemical/ Consumable store at HAL Factory Kanpur.” Cont. No. : MW/CIV/370/1/14-15 Note : Sqm. denotes Square Meters Cum denotes Cubic Meters MT denotes Metric Tonnes Rm denotes Running Meters Ltr denotes Litres Kgs denotes Kilograms.

1. The work in general shall be carried out as per MES SSR 2010 . For item of works not covered in the SSR shall be governed as per BIS specification or as per Sound Engineering practice or as specified and directed by the Engineer-in-Charge.

2. The quoted rates shall be for the net finished work / item inclusive of cost of all necessary materials, machinery, tools and plant in all the operations described in the BOQ at all heights etc. All the required tests shall be carried out by the contractor at their cost in the presence of Engineer-in-Charge or his authorized representative and shall submitt the test results to the Engineer-in-Charge. If the test are carried out at an outside laboratory, the cost of such tests, materials, transportation, etc., shall be borne by the Contractor.

3. Contractors shall inspect the site and fully acquaint himself / themselves with the scope and nature of work, access, location and working condition. No claim will be considered later on the ground of ignorance or otherwise of the conditions under which the work will be have to be executed.

4. Contractors will be solely responsible for any accidents to workmen engaged by them during execution of work.

5 The rates quoted shall be inclusive of all taxes such as Sales Tax/VAT, Turnover Tax, Entry Tax, Service Tax (Contractor's portion as per the existing or amended rules from time to time), Sales Tax on Works Contract and all duties and levies like royalty, cess etc. HAL shall not reimbuse any taxes to the contractor under any circumstances. 5.1 RECOVERY OF SALES TAX/VAT AT SOURCE Sales Tax on works Contract will be recovered as per the rates indicated in UP Sales Tax act. The applicable sales Tax of the Gross value shall be deducted as per the provision of Law and the same will be remitted to the Tax Authorities on monthly basis. A certificate to this effect will be issued to the Contractors.

6. All materials required for the work will be contractors own supply. They shall conform to relevant IS standards and shall be of approved brand /manufacture as specified. If the specified brand/manufacture not available, then only alternative equivalent brand may be produced for approval. However, prior approval of HAL shall be taken before procurement of any material.

7. Bull dozers, power shovel, graders, loaders, Power road rollers, vibratory rollers, sheep foot rollers, and any other plant and machinery required are contractors own supply. No plant and machinery will be issued by HAL.

8.The Contractor may use Ready Mixed Concrete (R.M.C) without claiming for any extra cost subjected to satisfying the following conditions. The agency, which supplies R.M.C to be got approved by HAL.

9. For antitermite treatment and water proofing work contractor's has to furnish performance guarantee bond for five years on non judical stamp paper of Rs 100.00. Defect laibility of such items will be released after completion of guarantee period.

10. All the items shall be carried out as per the Specifications and as directred and approved by EIC.

HINDUSTAN AERONAUTICS LIMITED

TRANSPORT AIRCRAFT DIVISION-KANPUR

Sub: “Construction of Oil & Lubricant/ Chemical/ Consumable store at HAL Factory Kanpur.”

Cont. No. : MW/CIV/370/1/14-15

S.N. Description of Item Freak Item Qty. Unit Rate per unit in Figures Rate per unit in Words Amount (In Rs.)

1 Earth work in excavation in ordinary soil in trenches, not exc.1.50m depth and of any width, for foundation & other similar allied works etc. including cost of dressing / trimming sides and leveling / grading and ramming of bottoms of excavation, dewatering etc if required, getting out and return filling with excavated earth in layers of not exceeding 25cm thick including watering consolidating etc. & disposing the surplus excavated earth in the low lying area of factory within a lead of 500 mtrs etc. complete as directed &approved by EIC. (-) 275.00 Cum 100.00 Rupees One Hundred Only 27500.00

2 Providing and laying Plain cement concrete in 1:4:8 (1Cement : 4 Coarse sand: 8 stone aggregate of 40 mm nominal size) in foundation, floor or any description of work including cost of all operations such as manual / mechanical mixing, placing, compacting, scaffolding, side shuttering, curing etc . Complete as directed by EIC. 25.00 Cum 4000.00 Rupees Four Thousand Only 100000.00

3 Providing and laying brick work in walls, pillars, fascia, drain etc. in cement mortar 1:6 (1 cement : 6 coarse sand) in well burnt clay bricks, First class bricks, straight or curved in plan of any radius, in foundation and super- structure, work up to any height or depth including cost of scaffolding , raking out joints up to 1 cm depth as the work proceeds, curing etc. complete in all repect as per specification and direction of EIC. (+) 100.00 Cum 5000.00 Rupees Five Thousand Only 500000.00

4 -- do-- but half brick thick wall in CM 1:4. All complete as directed and approved by EIC. (+) 50.00 Sqm 700.00 Rupees Seven Hundred Only 35000.00

5 Providing, rendering, screeding and dubbing out plaster in cement mortar 1:3 (1cement: 3 Coarse Sand) of 5 mm thick on concrete surfaces at any height / depth of ceilings, column, beams, staircase, fins, fascia , drop etc. including trowelled to smooth and even finish without using extra cement, including cost of surface preparation, required scaffolding, curing etc. complete as directed & approved by EIC. 105.00 Sqm 150.00 Rupees One Hundred Fifty Only 15750.00

6 Extra over rendering or plastering for work in isolated widths or in widths not forming part of general plastering such as in bands, sunk panels, cornices, skirting, drip moulds and similar work not exceeding 15cm in width or grith; including cutting to edges, all mitres and stopped ends etc. all complete as directed and approved by EIC. 120.00 RM 40.00 Rupees Forty Only 4800.00

7 Supplying and fixing in position steel reinforcement (TMT bars) conforming to IS-1786-1985 of any dia of approved make such as TATA/SAIL/ISPAT/VIZAG for slabs, beams, columns, footing or any other similar description of work, including cut to length, bent to shape as required, cranking bending , spirally or hooping, hooking ends and binding with mild steel wire soft drawn of not less than 0.9 mm dia, securing with chairs, placing in position and maintaining firmly so that placing and ramming of concrete will not displace it, removing rust and scales if any, wastage, etc. complete as directed & approved by EIC (Test report of manufacturer is to be submitted along with the supply). 12500.00 Kg 62.00 Rupees Sixty Two Only 775000.00

8 Providing and laying R.C.C 1:1 1/2:3 (1Cement : 11/2 Coarse sand: 3 stone aggregate of 20 mm nominal size) for foundation, beam, columns, lintels etc. or any description of work including manual / mechanical mixing, placing, compacting, lead & lifts, curing etc . Complete as directed by EIC. 70.00 Cum 6000.00 Rupees Six Thousand Only 420000.00

9 Providing and laying Ready Mixed cement Concrete ( Design Mix M-25 grade ) in slab, floor, pavments or simlar items, RMC (Ready Mixed Cement Concrete M- 25 grade, using 20mm graded granite aggregate and consolidated with mechanically vibrated needle and surface /screed vibrators and curing. Design mix to be got approved from EIC. If any additional quantity of cement over and above the minimum quantity of 300 Kgs per Cum is required as per the design mix/trial mix to achieve the specified strength, cost of the same shall be borne by the contractor. Note: Design Mix to be got approved by EIC before the work. 70.00 Cum 7000.00 Rupees Seven Thousand Only 490000.00

10 Providing and laying Plain cement concrete 1:2:4 (1 cement :2coarse sand : 4 stone coarse 12.5mm aggregate downgraded) 25mm thick in drain foundations, floors or in any description of including manual / mechanical mixing, placing, compacting, curing scaffolding, form work finishing the surface even and smooth using extra cement all complete as directed & approved by EIC. (+) 65.00 Sqm 300.00 Rupees Three Hundred Only 19500.00

11 Supplying & fixing two track powder coated glazed Aluminium bombay sliding window all complete with outer frame of 63 x 38 x 2 mm Aluminium section and two track channel (Bottom / top &sides) of size 62 x 32 x 1.2mm, sliding shutters made of special Bombay sliding window section 38 x 19 x 1.2mm, All complete with 5mm thick float glass of MODI/ SAINT GOBAIN, edges wrapped in rubber beading, two nos roller of flyrail , including providing and fixing powder coated aluminium grill , powder coated Aluminium Handle & locking arrangement etc. all , complete with labour material, wastage etc. all complete as directed & approved by EIC. (-) 25.00 Sqm 4000.00 Rupees Four Thousand Only 100000.00

12 Providing and fixing powder coated Aluminium grill having weight not less than 2.0 Kg/m2 of approved make such as (HINDALCO/JINDAL/INDAL) of approved design to the existing outer frame of Bombay sliding window including required fittings such as 'Y' channel all around the frame for properly securing the aluminium grill including circular cutting wherever directed for provision of Air cooler, all complete with cutting wastage etc. compete in all respect as per specification and direction of EIC . (+) 5.00 Sqm 3000.00 Rupees Three Thousand Only 15000.00

13 Providing, manufacturing and erecting partly glazed and partly panelled powder coated Aluminium parititions using standard sections of JINDAL, HINDALCO or equivalent as per approved design and drawing with bottom panel of 12mm thick prelaminated exterior grade particle board of reputed manufacturers such as Archid, Kitlam, Century confirming to 12823 and top panels with 5mm thick float glass as detailed below including necessary cleats, Screws, fastners etc., a) Top, middle, vertical and bottom members -100x 44 x2mm of weight 1.519Kg / RM forming grid not exceeding 1.00 Sqmt panel as approved. b) Glass - 5.00mm thick plain float glass of MODI / SAINTGOBAIN or equivalent c) Bottom Panels 12mm thick prelaminated exterior grade in top panal particle board. d) Rubber gaskets - Good quality of approved make e) Glazing clips - Weight of 0.097Kg/RM. (+) 10.00 Sqm 3500.00 Rupees Three Thousand Five Hundred Only 35000.00

14 Providing, manufacturing & fixing partly glazed partly panelled powder coated Aluminum hinged single doors with door frame shutter of approx. size 1.00 x 2.00 m of extruded section of JINDAL/HINDALCO with door frame section 100 x 44 x 2mm, vertical members, top and middle rails of door shutter of 83 x 44 x 2mm, bottom rail of door shuter of 114 x 44 x 2mm section, fixing the door to the wall with rawplugs and screws incluiding providing and fixing MS tie rod of 8mm for the door shutter, all as directed and approved be EIC. The quoted rate shall be inclusive of supplying and fixing following fixtures for each shutter. a) Aluminium body hydraulic door closer universal type of Everite / Hardwin or equivalent. 1 No. b) Powder coated Aluminium towerbolt of 200 mm long of extruded section (ISI marked only) 2 Nos. c) -----------do -----------Aldrop 250mm long 1 No. d)Internal locks of approved make 1 No. e) Powder coated Aluminium alloy handles fabricated type American 150mm ISI marked only 2 Nos. f) Aluminium powder coated butt hinges 100 mm long ISI marked 4 Nos. g) 5mm thick float glass of MODI/ SAINT GOBAIN for the upper portion of the door with good quality rubber beadings, powder coated Aluminum glazing chips. h) 12mm thick both sided pre-laminated exterior grade particle board confirming to IS 12823 of NOVAPAN/GREENLAM/FORMICA/SANDIK/SWARAJ or equivalent (ISI marks) for the lower portion of door shutter (approx. 1.00 mtr height) using powder coated Aluminium glazing clips, beading etc.as directed & approved by EIC. 25.00 Sqm 5000.00 Rupees Five Thousand Only 125000.00

15 Supplying & fixing acid proof non skid ceramic tiles of size 400x400mm x 9 mm thick (Approx size) in floor etc of Kajaria, Johnson & Johnson, Orient Bell, Somany, Nitco make etc of first quality (tiles sample as approved by EIC) for floors including providing and laying 15 mm nominal thick cement mortar screed bedding layer of CM 1:4 ( 1 cement : 4 coarse sand ) and fixing tile with cement slurry, over the existing floor, and preparation of surface by wire brush cleaning and wetting the surface with water and spreading cement slurry, including cost of raking the joints and pointing with tinted white cement, curing, cleaning including cutting of tiles, wastage and disposal of debris at directed place etc. complete as directed by EIC. [Note:- Tile sample to be got approved by EIC before laying]. (-) 250.00 Sqm 1300.00 Rupees One Thousand Three Hundred Only 325000.00

16 Supplying and fixing glazed ceramic wall tiles of first quality of reputed manufacturers such as Kajaria, Johnson & Johnson/ Orient Bell/ Somany/ Nitco tiles in dado and skirting of size (450x350x 7)mm thick or bigger size with 10 mm thick cement mortar screed bedding layer 1:4 ( 1 cement : 4 coarse sand ) cost of raking the joints and pointing with white cement mixed with matching tint finishing wall ( matching with floor tiles colour) / make all complete as directed & approved by EIC. (+) 50.00 Sqm 1300.00 Rupees One Thousand Three Hundred Only 65000.00

17 Providing & laying ultra tiles VENTURA-T of size 300 x 300 mm of approved design and shade in Treads and laid over 15mm thick cement mortar 1:4 bedding layer jointing with cement slurry matching the shade & pointing with white cement & pigment complete with labours, material wastage etc. as directed & approved by EIC. 10.00 Sqm 1300.00 Rupees One Thousand Three Hundred Only 13000.00

18 --do-- but VENTURA-R of size 152 x 300 mm for staircase risers over 15mm thick cement mortar in CM 1:4 complete all as directed & approved by EIC. (+) 5.00 Sqm 1300.00 Rupees One Thousand Three Hundred Only 6500.00

19 Providing & applying two coats oil bound distemper of approved colour with one coat of alkali resistant primer all of approved make such as Asian / Berger/ ICI or equivalent conforming to IS 428-1969 to walls, ceiling or of any description at any height, including providing and applying Birla white/Latafinish/JK white wall putty as per requirement of site for making surface even and smooth complete with cost of all materials, labour, wastage, safety measures, scaffolding, staging etc. as directed & approved by EIC. (+) 580.00 Sqm 150.00 Rupees One Hundred Fifty Only 87000.00

20 Providing & Applying two coat of premium acrylic silicon based weather resistant exterior paint including one coat of exterior primer such as weather coat long life / weather shield / Apex of reputed manufacturer including providing and applying Birla white/Latafinish/JK white/Myklatirat wall putty @ 0.40 Kg / Sqm for making surface even and smooth. All complete with labour, material ,required scaffolding, brushes and other tools & plants required for proper completion of work cleaning the splashes from door, windows and from other surfaces etc.complete as directed & approved by EIC. (+) 500.00 Sqm 150.00 Rupees One Hundred Fifty Only 75000.00

21 Supplying and fixing 110mm PVC, SWR single socketed pipe in any length with rubber ring joint laid in trenches or in floors for soil waste of approved make such as Supreme Kisan, Finolex, Prince or equivalent Conforming to IS: 4985-2000;(Class - 4) of complete with all required necessary fittings for fixing etc. complete as directed & approved by EIC . (-) 50.00 RM 200.00 Rupees Two Hundred Only 10000.00

22 Supplying and fixing PVC (SWR) bends of 110mm with access door socketed of Supreme, kisan, Finloex, Prince (ISI make) etc complete as directed & approved by EIC. (-) 10.00 Each 100.00 Rupees One Hundred Only 1000.00

23 Sand filling under floors or in foundations including watering and consolidation, complete as directed & approved by EIC. (-) 15.00 Cum 100.00 Rupees One Hundred Only 1500.00

24 Supplying & filling with aggregates of gauge 40 to 80mm broken stone or boulders in pits/ wells in layers including lead, lift, T & P etc. complete as directed & approved by EIC. (+) 10.00 Cum 2500.00 Rupees Two Thousand Five Hundred Only 25000.00

25 Drilling of 200mm dia boring hole 2m deep from ground level in soil including all tools & machinery and disposal of spoil upto a lead of 50m within the premises of factory etc. complete as directed & approved by EIC. (+) 1.00 Each 2000.00 Rupees Two Thousand Only 2000.00

26 Drilling of boring hole 200mm dia after 2 meter depth including all tools & machinery tools and disposal of spoil upto a lead of 50m within the premises of factory etc. complete as directed & approved by EIC Rate also included for making strata chart to be made for making slots in ribbed pipe. (+) 38.00 RM 1000.00 Rupees One Thousand Only 38000.00

27 Supplying & fixing 160mm dia PVC pipe of pressure rating 6 kg/ cm2 of approved make such as Supreme / Finolex / Prince (ISI make) with socket and fittings for complete job etc. complete as directed & approved by EIC. (-) 35.00 RM 250.00 Rupees Two Hundred Fifty Only 8750.00

28 Supplying & fixing 160mm dia PVC ribbed screen sloted pipe of pressure rating 6kg/ cm2 of approved make such as Supreme / Finolex /Prince (ISI make) with socket and fittings for complete job etc. complete as directed & approved by EIC. (Slot will be made in accordance with strata chart). (-) 6.00 RM 250.00 Rupees Two Hundred Fifty Only 1500.00

29 Providing & applying flush pointing in CM 1:3 in brick wall including raking out joints complete as directed & approved by EIC. (+) 50.00 Sqm 1000.00 Rupees One Thousand Only 50000.00

30 Supplying & Fixing cast iron work grade FG 150, unmachined, in gratings and similar articles exc. 5.00kg/each and as directed by EIC. (+) 2500.00 Kg 140.00 Rupees One Hundred Forty Only 350000.00

31 Providing, rendering , screeding and dubbing out in cement mortar 1:6 (1cement: 6 graded coarse sand)10mm thick, on rough or fair faces of brick/ concrete surfaces at any height / depth on wall, ceiling, fascia, etc. including trowelled to smooth and even finish without using extra cement, including cost of surface preparation , scaffolding, curing etc. complete as directed by EIC. (+) 1000.00 Sqm 180.00 Rupees One Hundred Eighty Only 180000.00

32 Supplying & fixing non-skid ceramic tiles of approx. size 400x400mm x 7-9 mm thick in floor, of reputed manufacturers such as Kajaria, Johnson & Johnson, Orient Bell, Somany, Nitco make of first quality , including providing and laying 15 mm nominal thickness cement mortar screed bedding layer of CM 1:6 ( 1 cement : 6 coarse sand ) and fixing tile with cement slurry and preparation of surface by wire brush cleaning and wetting the surface with water and spreading cement slurry. including cost of raking the joints and pointing with tinted white cement, curing, cleaning the tiles, including cutting of tiles, wastage and disposal of debris at directed place etc. complete as directed & approved by EIC. [Note:- Tile sample to be got approved by EIC before laying]. 12.00 Sqm 1300.00 Rupees One Thousand Three Hundred Only 15600.00

33 Supplying and fixing glazed ceramic wall tiles of first quality of reputed manufacturers such as Kajaria, Johnson & Johnson/ Orient Bell/ Somany/ Nitco tiles in dado and skirting, of size (450x350x 7)mm thick with cement slurry over sub- base of 10 mm thick cement mortar 1:4 ( 1 cement : 4 coarse sand ) cost of raking the joints and pointing with white cement mixed with matching tint finishing wall ( matching with floor tiles colour) / make all complete as directed & approved by EIC. 50.00 Sqm 1300.00 Rupees One Thousand Three Hundred Only 65000.00

34 Supplying and fixing in position set of coloured Glazed Vitreous China make oval shaped counter top wash Basin of Parryware or equivalent (design & colour as approved by EIC) of size 550 x 450 mm approx. including cost of 32 mm dia CP brass waste coupling, CP swan neck pillar cock, CP angle valve, CP bottle trap all CP fittings of Parryware / Plumber or equivalent make , complete in all respect as directed & approved by EIC. (+) 2.00 Each 8000.00 Rupees Eight Thousand Only 16000.00

35 Supplying and fixing urinal partition black granite on both side finish 18 - 20mm thick machine cut of size 90 cm X 50 cm (approx.) or required size to bedded and jointed grouted on wall in CM 1:2 and finishing edges with white cement and admixture pigment to match the shade of granite stone including cutting forming, round edge beading moulded in granite with polish complete in all respect including all labour, materials, T& P as per direction of EIC. 1.50 Sqm 2500.00 Rupees Two Thousand Five Hundred Only 3750.00

36 Supplying and fixing Red granite wash basin platform 20mm thick, one side polished, machine cut of required size to accommodate two oval shape wash basins, including making oval shape opening for two W.B. as per size of wash basin providing and laying bedding mortar in CM 1:4 , 15 mm and finishing & polishing the edges of granite and pointed with pigmented white cement to match the shade of granite stone including cutting forming, round edge beading moulded in granite with polish complete in all respect including all labour, materials, T& P as per direction of EIC. (-) 1.00 Sqm 2500.00 Rupees Two Thousand Five Hundred Only 2500.00

37 Providing and Fixing coloured Vitreous Chinaware coloured new magnum Urinal of Parryware or equivalent of size 635mmX395mmX420mm complete with providing and fixing plugs, bedding urinals in wall in cement mortar 1:2 ( 1 cement : 2 coarse sand), securing urinals to plugs with 60 mm long S.S screws, pointing around urinals back in cement. Complete with the following system:- (a) Providing & fixing 50mm PVC Pipe supreme make or equivalent about 750mm long concealed vertically in wall & reparing the wall with CM (1:3). (b) Providing & fixing CP Brass waste couplings and jointing with waste pipe & put in concealed pipe. (c) Providing & fixing 15mm CP Brass half turn fancy flush cock, to water line including all fittings fixture with CP Cover plate. (d) Providing & fixing CP spreader of make Parryware or equivalent 15mm dia with CP Pipe connector to urinal, all complete with required fitting & fixture T- elbow, Grating of C.P. Union, jointer connector etc. for proper functioning of urinal complete in all respect as directed & approved by EIC. (+) 3.00 Each 8000.00 Rupees Eight Thousand Only 24000.00

38 Supplying & Fixing in position coloured European Water Closet of vitreous china with 'P' or 'S' trap left or right bent of Parryware make or equivalent as per direction of EIC, with plastic seat cover and lid fixed with CP brass hinges and rubber buffers. Fixing of 10 litre capacity Plastic flushing cistern of Parryware Deluxe model make complete with all accessories such as inlet, ball valve, float, 15 mm dia PVC pipe connection,40 mm dia PVC flush pipe bent to shape with necessary connections, fittings and clamps PVC connection with union 15 mm dia overflow pipe with specials, providing and fixing 15 mm dia GI connections, GI over flow pipe with specials including cutting chases and finishing in walls after embedding of pipes , floors etc , where required with Cement mortar 1:3 ( 1cement: 3coarse sand )all complete including cost of painting of brackets( with red oxide primer and two coat of synthetic enamel paint). 1.00 Each 7000.00 Rupees Seven Thousand Only 7000.00

39 Supplying & Fixing factory made PVC solid panel door shutter 30 mm thick of approved manufacturer such as Rajshri Plastiwood/ Syntex/Polypan or equivalent brand factory made solid panel PVC door shutter consisting of frame made out of M.S. tubes of 19 gauge thickness and size of 19mmx19 mm for stiles & 15 mm x 15 mm for top & bottom rails. M.S. frame shall have a coat of steel primers of approved make and manufacture. M.S. frame shall be covered with 5 mm thick heat moulded Rajshri /Syntex/Polypan PVC 'C' channel of size 30x50 mm forming stiles, and 5 mm thick, 75 mm wide PVC sheets for top rail, lock rail & bottom rail on either side, and 10mm (5mmx2) thick, 20mmwide cross PVC sheet as gap insert for top rail & bottom rail. Panelling of 5 mm thick PVC sheet to be fitted in the M.S. frame welded/ sealed to the stiles & rails with 30 mm wide x5mm thick PVC sheet beading on either side, and join together with solvent cement adhesive.. An additional 5 mm thick PVC strip of 20 mm width is to be stuck on the interior side of the 'C' channel using PVC solvent cement adhesive etc. complete as per direction of E -I-C, manufacturer's specification & drawing. Including all fittings such as aluminum tower bolt 150mm long 2 Nos.: Sliding door bolt 200mm long 1No & aluminum handle 100mm long 2no in each shutter as directed & approved by EIC. 4.20 Sqm 2800.00 Rupees Two Thousand Eight Hundred Only 11760.00

40 Supplying & Fixing factory made polyvinyl chloride (PVC) Door Frame of approved manufacturer such as Rajshri Plastiwood / Syntex/ Polypan of size 50x47mm with a wall thickness of 5mm, made out of extruded 5mm rigid PVC foam sheet, mitre cut at two corners and joined with 2 nos. of 150 mm long brackets of 15x15mm M.S. Square tube. The two vertical door profiles are to be reinforced with 19x19 mm M.S. Square tube of 19 gauge,EPDM rubber gasket weather seal to be provided through out the frame. The door frame shall be fixed to the wall using 65/100 mm long M.S. Screws through the frame by using PVC fasteners. A minimum of 4 nos. of screws to be provided for each vertical member & minimum 2nos. For horizontal member etc. complete as per manufacturers specification and direction of EIC. 15.00 Rm 500.00 Rupees Five Hundred Only 7500.00

41 Supplying & Fixing in position tilling /adjustable type LOUVERS of size 600 x 600mm, Louver strip fixed over aluminium frame made of powder coated aluminium section of 63 x 38 x 2mm and fixing of 3.00mm thick and 100 mm wide pinheaded glass strip etc. Complete as directed and approved by EIC. (-) 2.00 Each 200.00 Rupees Two Hundred Only 400.00

42 Supplying & Fixing Aluminium powder coated barrel tower bolt 200 mm long size of extruded section of approved qualtiy (ISI mark) with all accessories which is required and complete in all respect as directed & approved by EIC. (+) 6.00 Each 200.00 Rupees Two Hundred Only 1200.00

43 Supplying & Fixing Aluminum powder coated 150 mm long Handles (dull finish cast type of good quality having ISI mark) to each door shutter all complete as directed & approved by EIC. (+) 6.00 Each 125.00 Rupees One Hundred Twenty Five Only 750.00

44 Providing and fixing medium weight, cold rolled steel Butt hinges of 100 mm size fixed with screws for doors, windows etc. all complete with labour, material and fixing to wooden / MS frame, making cut outs in wooden frame for fixing hinges etc. complete as directed by EIC. 12.00 Each 50.00 Rupees Fifty Only 600.00

45(a) Supplying and Fixing of CP brass two way bib cock for 15 mm dia pipe of Plumber / GEM / L&K or equivalent approved make, including jointing with water supply lines, complete as directed by EIC . (+) 2.00 Each 1700.00 Rupees One Thousand Seven Hundred Only 3400.00

(b) Supplying and Fixing of CP brass long body fancy type bib cock for 15 mm dia pipe of Plumber / GEM / L&K or equivalent and approved make, including jointing with water supply lines, complete as directed by EIC . (+) 2.00 Each 1000.00 Rupees One Thousand Only 2000.00

46 Supplying and fixing of CP brass angle cock / valves of Plumber / GEM / L&K make for 15 mm dia pipe including jointing with water supply line and all complete operation for fixing including required accessories etc. complete as directed by EIC. (+) 3.00 Each 700.00 Rupees Seven Hundred Only 2100.00

47 Supplying and fixing 580 x 440 mm light coloured glaze porceline Indian water closet (Orissa Pattern) confirming to IS:2556 of make parryware or equivalent with'P' or 'S' trap with or without vent set, including supplying and fixing 10 Ltrs. Capacity valve less syphonic action type low level PVC cistern confirming to IS : 774, with brackets, 40mm dia PVC waste pipe with coupling, 15mm dia high density PVC inlet pipe connection, 15mm dia CP angle cock of parry ware all above of approved make, colour etc complete as approved, specified and directed by the EIC. (-) 1.00 Each 3000.00 Rupees Three Thousand Only 3000.00

48 Supplying and fixing of good quality bevelled edge looking mirror of 5mm thickness of approved manufacturer such as Modi Atul , saint -gobain etc of any size with AC Sheet backing and 1" wooden beading all round edges, all complete as per direction of EIC. (+) 0.90 Sqm 1000.00 Rupees One Thousand Only 900.00

49 (a) Supply & fixing of G.I. water tubing 15 mm dia (Galvanized Iron) TATA/ JINDAL/ ZENITH make of medium grade in required lengths with screwed socket joints, together with all tube, fittings (Such as bends, elbows, tees, short pieces, connectors back-nuts, diminishing pieces, caps, plugs and unions etc.) and fixing complete with clips, wall hooks, wooden plugs at suitable intervals including cost of cutting through walls, floors / roofs etc and their making good, laying in trenches etc. Also for cutting, screwing and waste, and for making forged bends on piping as required, connectors shall be inserted, where required or as directed by EIC. 28.00 RM 180.00 Rupees One Hundred Eighty Only 5040.00

(b ) ---do as above but 25 mm dia. (-) 6.00 RM 225.00 Rupees Two Hundred Twenty Five Only 1350.00

50 Supplying and fixing C.P Liquid soap Dispenser of any approved make/ branded hand push types including all fixing accessories and operations etc. complete as directed & approved by EIC. (-) 1.00 Each 300.00 Rupees Three Hundred Only 300.00

51 Supplying and fixing PVC floor trap 75 mm dia. of approved make such as supreme / Finolex/ Kisan/ Prince (ISI mark)with grating including jointing to waste PVC pipes with cement concrete 1:2:4 etc. complete as directed & approved by EIC. (-) 4.00 Each 200.00 Rupees Two Hundred Only 800.00

52 Supplying and fixing 110mm/ 75mm PVC, SWR single socketed pipe in any length with rubber ring joint fixed to walls, laid in trenches, under floor for soil waste of approved make such as Supreme Kisan, Finolex, Prince or equivalent Conforming to IS: 4985-2000;(Class - 4) complete with all required necessary fittings for fixing etc. complete as directed & approved by EIC for following dia. pipes

(a) 110 mm dia. (-) 3.00 RM 250.00 Rupees Two Hundred Fifty Only 750.00

(b) 75 mm dia. 10.00 RM 200.00 Rupees Two Hundred Only 2000.00

53 Supplying and fixing PVC (SWR) Junction single 'T' equal or unequal with access door for following dia. of Supreme, Kisan, Finolex, Prince (ISI make) etc. complete as directed & approved by EIC.

(a) 110 mm dia. (-) 2.00 Each 200.00 Rupees Two Hundred Only 400.00

(b) 75 mm dia. 4.00 Each 150.00 Rupees One Hundred Fifty Only 600.00

54 Supplying and fixing PVC (SWR) bends of any radius with access door for following dia. of pipes of Supreme, kisan, Finloex, Prince (ISI make) etc complete as directed & approved by EIC.

(a) 110 mm dia. 2.00 Each 200.00 Rupees Two Hundred Only 400.00

(b) 75 mm dia. 4.00 Each 150.00 Rupees One Hundred Fifty Only 600.00

55 Supplying and Fixing PVC(SWR) reducer 110 x 75 mm of Supreme, kisan, Finolex, Prince make etc. complete all as directed & approved by EIC. (+) 1.00 Each 150.00 Rupees One Hundred Fifty Only 150.00

56 Supplying and Fixing PVC(SWR) vent cowls 75 mm dia of Supreme, kisan, Finloex, Prince (ISI make) etc. complete all as directed & approved by EIC. (+) 1.00 Each 125.00 Rupees One Hundred Twenty Five Only 125.00

57 Supplying and fixing PVC water tanks of make Sintex/ Polycon/ Tirupati / Supreme rotational moulded polythelene water storage tanks 1000 Ltr. cylindrical vertical with closed top hoisted and fixed to position, three layer body, including providing and fixing PVC ball cock, tank connection and all required G.I. fittings etc. complete as directed and approved by EIC. (+) 1.00 Each 9000.00 Rupees Nine Thousand Only 9000.00

58 Providing and fixing to chowkhat 30 mm thick, single leaf, factory made flush door shutter conforming to IS- 2202( Part-I)-1983, of G-door, Minar, Swastik, Shatabadi make and ISI marked, solid core construction, with block board core and commercial types veneers face on one sides and other face is covered with decorative face veneer with lipping/frame to match etc. complete , flush door shall be free from twist or wrap in plane etc. including provision of suitable blocks for interlocks, latches or other fittings etc. complete as directed & approved by EIC. (+) 2.50 Sqm 2800.00 Rupees Two Thousand Eight Hundred Only 7000.00

59 Providing and fixing CP Brass health faucet with telephonic arrangement and hook etc. of Plumber / GEM / L&K/ or any other equivalent make complete with required fittings & accessories as per direction of EIC. (+) 1.00 Each 1100.00 Rupees One Thousand One Hundred Only 1100.00

60 Supplying & fixing C.P Bottle trap of Plumber / GEM / L&K or any other equivalent brand etc. complete and approved by EIC. 3.00 Each 1100.00 Rupees One Thousand One Hundred Only 3300.00

61 Supplying erection & fixing of sliding door of aluminium powder coated of vertical, top middle & bottom rails of section 100 x 44 x 2mm and stiles of Sec. 83 x 44 x 2mm including supplying & fixing of top panel with 5mm with figured glass, pinhead type & bottom panel with 12mm botttom pre-laminated board including cost of handle, lock, glazing clip, rubber beading, G.rails and sliding roller for sliding door Complete as directed & approved by EIC. 2.50 Sqm 4000.00 Rupees Four Thousand Only 10000.00

62 Supplying, fabricating and fixing Stair (framed) including stringers, treads, landing, railings, balusters, hand rails etc. including cleats, brakets, etc. including one coat of red oxide primer providing metal putty and sand papering for making the surface smooth and two coat of first quality synthetic enamel paints, complete all as directed & approved by EIC. 4500.00 Kg 100.00 Rupees One Hundred Only 450000.00

63 Providing, centring & shuttering for the sides and soffits of suspended slabs, lintels, beams, floor slabs, landing and similar work of any description, in required shape and size, with true line & plumb etc. with plywood, MS plates shuttering including oiling of the top surfaces of shuttering , all supports with MS or wooden braces, struts, balli, etc, including working scaffoldings, ladders, gangways as required, including removal of formwork & centring after the stripping period as described in MES-SSR- part-I & IS 456 2000 , etc complete as directed and approved by EIC. 550.00 Sqm 250.00 Rupees Two Hundred Fifty Only 137500.00

Amount in Rs. 4699675.00

Amount in words:- Fourty Six Lakh Ninty Nine Thousand Six Hundred Seventy Five Only.