Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹35.9 LAccepted-AOC | L1 | Accepted-AOC L1 | |
| 2 | L2₹37.0 L+₹73,525 (2.03%)Rejected-AOC | L2 | Rejected-AOC L2 | |
| 3 | L3₹37.3 L+₹1.1 L (2.97%)Rejected-AOC 131 SANGAM NAGAR OPP NATIONAL SCHOOL SANGHVI PUNE 411027 | PUNE | MAHARASHTRA | 411027 | L3 | Rejected-AOC L3 | |
| 4 | L4₹38.0 L+₹1.8 L (4.91%)Rejected-AOC NO 1A 1 SHALOM VALLUVAR STREET SIVANANDHA COLONY COIMBATORE TAMIL NADU 641 012 | COIMBATORE | TAMIL NADU | 641012 | L4 | Rejected-AOC L4 |
Tender Value
₹41 L
EMD Value
₹82,000
Closing Date
8 Sept 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
CWE NAVY CHENNAI
Commander Works Engineers Navy Military Engineer Services Fort St George Rajaji Salai Chennai600 009
PROVISION OF AUTOMATIC VOLTAGE REGULATOR FOR DRC UNDER GE TIRUNELVELI
2022_MES_544700_1
CA NO CWE/NAVY/TVL/81385/E8 OF 2022-23
Open Tender
Electrical and Maintenance Works
Item Rate
180 days
TIRUNELVELI
Please refer Tender documents.
9 documents required · 9 mandatory
₹500
GE TIRUNELVELI
₹82,000
Yes
3 Nov 2022
11 Aug 2022
9 Sept 2022
11 Aug 2022
8 Sept 2022
25 Aug 2022
12 Aug 2022 - 20 Aug 2022
Amount
Supply, Install, testing and commissioning of HT 11 KV, 3 phase, 50 Hz outdoor type, ONAN oil cooled, oil immersed, copper wound outdoor HT AVR class 'A' insulation on load stepless rolling contact type automatic voltage regulator auto wound delta connected booster transformer double wound open/open automatic control gear consist of one electronic relay design AVR 500 KVA with input 9 KV to 12 KV and output 11 KV ± 1%, one reversing geared motor unit, two limit switch in order to avoid over running highest and lower position, chain drive, coupling devices and all electrical connections including fitting as lifting lugs, earthing terminals, rating plate, filter valve top and bottom, oil filling hole, thermometer pocket, silica gel dehydrating breather, oil level gauge, conservator tank, dial type oil temperature indicator with alarm and contacts, explosion vent, Bucholz Relay with alarm and trip contacts, air release plug with following specification: (i) Hand control : Hand wheel will be located in the front of the regulator tank at convenient operative height. (ii) Motor Control : Raise/ Lower push button control by means of small single phase reversible geared motor of the permanent capacitor type shall be provided. The limit switches shall be provided to restrict the travel at extreme positions, with the arrangement, it would also be possible to provide remote control of the regulating unit. The reversible geared motor wound of 'STEP-SYN' type. (iii) Automatic control : For automatic correction of fluctuating supply voltage providing Electronic Relay which will sense the output voltage and provide signal to the driving motor for necessary correction. (iv) Maximum temperature rise: (i) Oil by thermometer : 50 deg. C (ii) Winding by resistance : 55 deg. C (iii) Hot spot temperature indicator : 65 deg. C (iv) Limit of hot spot temperature : 110 deg C
Supply, laying & testing XLPE cable , earthed, insulated, screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty)with stranded aluminium conductor, 11000 volts grade, of size 3 core 95 sq mm complete all as specified and directed. Note: Earthwork, excavation, cable protection shall be measured and paid under relevant items here-in-after.
Earthing complete with GI plate electrode 60cm×60cm.× 6 mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less 'than 1.5 metres below normal ground level, connected to 32×6 mm GI strip as earthing lead by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 3 connected to earthing test point all as specified or indicated including funnel mesh, GI water pipe of dia 15mm, GI protection pipe of dia 40mm all as specified and directed by Engineer-in-Charge.
Notes:- (i) Quoted rate deemed to include necessary earth work PCC chamber, RCC cover, reinforcement, removal of surplus soil , site clearance etc. (ii) Copper earth strip , GI Pipe 40 mm light grade 7.5 mtr and GI Pipe 15 mm medium grade 1.50 mtr deemed to be included the rate quoted by the contractor. (iii) Beyond 7.5 M the GI earth strip & GI pipe light grade 40 mm dia shall be measured and paid separately under the respective item of the schedule (iv) Quoted rate include testing after completion from test point and the desired earth resistance shall be not more than 2 ohm .If the desired result is not obtained the earthing will be re-done by the contractor at no extra cost.
Supply,errection, testing and commissioning of 11 KV 630 Amps 25 KA for 1sec floor mounting type, front access switch board of protection class IP 42 or better equipped with draw out type VCB breaker out door complete with all accessories, High grade Electrolytic Copper Busbar covered with Insulation Sleeves, CTs , PTs, Digital Meters with RS485 MOD BUS provision, Numerical / Electromechanical relays etc.rate shall be for the complete board including base frame , cutouts foundation bolts connected civil works and all other necessary items required for complete foundation of the panel. All necessary interlocking arrangements to be provided as per standards and as indicated in the drawings. The panel comprising the following :-
Incoming panel - 01 No comprising a) 11 KV 630 amps, 25 KA for 1 sec TP electrical draw out type, VCB breaker fitted with the following: b)1 No. shunt tripping device suitable for 110V D.C c)1 No. 12 No/ 12 NC Auxiliary contacts. d)1 set of LED Indicating lamps with series resister (red,green,suitable for 11.0V D.C) e)1 set of space heater with thermostat control suitable for operation on 230 Volts AC. f)1 No. DC power pack suitable for 3 trips with 110V DC output g)3 Nos. of 150/1A, CL-1,15VA CT for Metering h)1 Nos. 11KV/110 V, CL: 1, 200 VA air insulated draw out type cast resin potential transformer with primary fuse and secondary MCB
NUMERICAL RELAY a) 1 No non directional combined instantaneous high set unit 2 O/C & E/F relay with 2 nos hand reset contacts. b) 1 No non directional combined IDMT 2 O/C & E/F relay with 2 nos hand reset contact per unit per pole c) 1 Nos master trip relay.
Supply and fixing Cable jointing kit for 11 KV (Earthed) grade cable for outdoor termination heat shrink type joint complete with jointing material and accessories suitable for 3 core XLPE armoured aluminium conductor cable of size 50 sqmm to 95 sqmm complete all as specified and directed.
Excavation in trenches not exc. 1.5 m wide and not exc.1.5 m deep for laying of cable, pipe and for erecting of steel tubular swaged pole etc, and getting out in hard/dense soil complete all specified and directed.
Returning, filling in including spreading, levelling, watering and well ramming in layers not exc 25 cm complete all specified and directed. .
Removing excavated material not exc 50 mtrs and depositing where directed at a level not exceeding 1.5 mtr above the starting points in soil all as directed by Engineer-in-Charge.
Supply, spreading and compacting of approved river sand in cable ducts / trenches for cable cushion on both top and bottom of cable, including ramming as specified and directed by Engineer-in-Charge. (Note :- 1. Punned thickness only will be measured 2. Riddled earth may be used in case of non availability of river sand subject to price adjustment in terms of condition 62 of IAFW 2249.)
Supplying and laying reinforced precast concrete cable cover, but class HV, Type 1, flat, size 300mmx l80mm x 40mm complete all specified and directed.
PHEJAYS AGENCIES
LEO ENTERPRISES
shalom constructions
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .