BIRED/37/e-NIQ(1st call) of 2025-2026

SUB-HEAD 1--DISTRIBUTION WIRING. Distribution wiring in 1.1 KV grade 2x22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire (Brand Polycab/ Finolex/Havells/RR Kabel) partly in 20mm size PVC rigid conduit 'FR' (Precision make) [for ceiling portion only] and in 19mm bore, 3mm thick polythene pipe [for horizontal & vertical run embedded in wall], with 1x22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire for ECC, to light/fan/call bell points with Modular type switch (Brand Anchor Roma/ Legrand Mylinc/ Crabtree) fixed on Modular GI switch board complete with 2 no. suitable size “Ph & N” copper bar with top cover plate making earthing attachment fixed on wall incl. mending good damages to original finish. [only PVC Rigid Conduit on ceiling and remaining portion concealed] Average run 10 Mtr. [4(e)/E-25]

Distn. wiring in 22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed single core stranded copper wire (Brand approved by EIC) in 19 mm bore, 3 mm thick polythen pipe complete with all accessories embedded in wall to 240 V 6A 5 pin plug point incl. S&F 240 V 6A 3 pin Modular type plug socket & Modular type switch (Brand approved by EIC) incl. S&F earth continuity wire, fixed on 4 Module GI switch board with 3/4 Module top cover plate flushed in wall incl. mending good damages to original finish. On Board . [ 3 (i) / E-20 ]

SUB-HEAD 2--CUTTING CHANEL & WIRE LAYING. Cutting channel of required size on masonry wall by Electric operated cutting machine incl. supplying & fixing heavy gauge polythene pipe dia as stated below, by means of anchoring chemical (Hilti/Sika) and GI 'U' hooks of 8 SWG incl. supplying and drawing 18 SWG GI wire as Fish wire as per GS. 13 mm dia 3 mm thick. [ 5(a)/ E- 2 ]

19 mm dia 3 mm thick. [ 6(a)/ E- 2 ]

25 mm dia 3 mm thick. [ 7(a)/ E- 2 ]

Supplying and fixing PVC Rigid Conduit 'FR' [Precision Make] of following sizes on wall, ceiling with saddles and other accessories as required and mending good damages to building works. 20 mm size [ 7(a)/ E- 16 ]

25 mm size [ 7(b)/ E- 16 ]

Supplying & Fixing aluminium strip measuring 25mm x 3mm typically weighs approximately 0.22 kg/ meter for clamp of PVC Rigid Conduit pipe on ceiling portion.

Supplying and Drawing 1.1 KV single core stranded 'FR' PVC insulated & unsheathed single core stranded copper wire (Brand Polycab/ Finolex/Havells/RR Kabel) of the following sizes in the prelaid polythene pipe and by the prelaid GI fish wire and making necy. connection as required 3 x(1.5 sqmm) [ 1(b) /E- 9]

2x(2.5sqmm) + 1x(1.5sqmm) as ECC [ 1(s) /E- 9]

2x(4 sqmm)+1x(2.5 sqmm) [ 1(v) /E- 9]

2x(6 sqmm) + 1x(4 sqmm) as ECC [ 1(y) /E- 9]

Supplying & Fixing solderless Copper socket by crimping of Copper wires. a)1.5 sq mm

b) 2.5 sq mm [9(i) / F-5]

c) 4 sq mm [9(ii) / F-5]

d) 6 sq mm [9(iii) / F-5]

Supplying & Fixing sheet metal inspection box (16 SWG) of the following sizes flushed in wall by housing the same after cutting brick wall incl. making earthing attachment, painting and mending good damages to building works. 150 mm x 100 mm x 65 mm [11(b)/E-4]

200 mm x 150 mm x 65 mm [11(d)/E-4]

Supply & Fixing bakelite / perspex top cover on existing switch board by Brass screws after making housing for switch by cutting bakelite / perspex cover and making necessary connections as required 150 mm x 100 mm x 65 mm [12(b)/E-4]

200 mm x 150 mm x 65 mm [12(d)/E-4]

SUB-HEAD 3--PLUGS, SOCKETS & A.C POINT Supply & Fixing 240 V, 16 A, 3 pin Modular type plug socket (Brand Anchor Roma/ Legrand Mylinc/ Crabtree) with 16A Modular type switch, without plug top on 4 Module GI Modular type switch board with top cover plate flushed in wall incl. S&F switch board and cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc. [9(b)/E-18]

Supplying & Fixing GI Modular Switch Board of the following sizes complete with three no. suitable size Copper bar with holes (for Ph, N & E) fixed on bakelite/Hard Rubber insulator over the MS welded chairs incl. top cover flushed in wall for housing the board after cutting the brick wall incl. making earthing attachment, painting and mending good damages to building works. 6 module 1(b)/E-17]

Supply & Fixing 240 V, 6A, 5 pin Modular type plug socket (Brand Anchor Roma/ Legrand Mylinc/ Crabtree), without switch & plug top, on existing GI Modular type switch board with top cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc. [4(a)/E-17]

Supply & Fixing 240 V 6 A Modular type switch (Brand Anchor Roma/ Legrand Mylinc/ Crabtree) on existing GI Modular type switch board having top cover plate and making necessary connections as required [3(a)/E-17]

Supply & Fixing 240 V, 4 nos. 6 A, 3 pin Modular type plug socket with 4 nos. 6A Modular type switch (Brand Anchor Roma/ Legrand Mylinc/ Crabtree), 16A Modular switch type MCB (C-Curve) and Indicator without plug top on 2 row 18 Module GI Modular type switch board with 2 row 18 Module top cover plate flushed in wall incl. S&F switch board and cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc. [12/E-18]

Supply & Fixing 240 V, 25 A, Modular type starter (Brand North-West/ Anchor/ Legrand / Crabtree) with 25A Modular switch type DP MCB (CCurve) and 4 Module GI Modular type switch board with 4 Module top cover plate flushed in wall incl. S&F switch board and cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc. [17/E-19]

Supply & Fixing 240 V, 25 A, 3 pin Modular type plug socket (Brand Anchor Roma/ Legrand Mylinc/ Crabtree), without plug top and switch with 2 Module GI Modular type switch board with top cover plate flushed in wall and making necy. connections with PVC Cu wire and earth continuity wire etc. [ 5(a) / E-17]

Supply & Fixing 240 V, 25 A, 3 pin Modular type plug top with indicator (Brand approved by EIC) & necy. Connections. [5(b) / E-17]

Supply & Fixing 240 V, 25 A, 3 pin Modular type plug socket with 20/25A Modular switch (Brand Anchor Roma/ Legrand Mylinc/ Crabtree) type SP MCB (C-Curve) and 4 Module GI Modular type switch board with 4 Module top cover plate flushed in wall incl. S&F switch board and cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc. (for inverter connection).

SUB-HEAD 4-- HTPNDB, SPNDB etc. Supplying and fixing double-door Horizontal TPN MCB Distribution Board with IP-42/43 protection, concealed in wall as per GS. 8 Way[ Legrand / L& K / Scimens ] [ 14 / D- 10 ]

Supplying and fixing double-door SPN MCB Distribution Board with IP-42/43 protection, concealed in wall as per GS. 2+8 Way[ Legrand / L& K / Scimens ] [ 13 / D- 9 ]

2+12 Way[ Legrand / L& K / Scimens] [ 13 / D- 9 ]

Supplying and fixing 240/415 V MCB Isolator on din rail of existing DBs and necessary connection as perGS [Make-Legrand/ Schneider/Siemens/ Crabtree/ L&T) as per direction of EIC. ] 40 A DP [ 6 / D- 5 ]

Supplying and fixing 240/415 V MCB of Breaking capacity 10kA & C characteristics on din rail of existing DBs and necessary connectionas per GS (Make-Legrand/ Schneider/Siemens/Crabtree/L&T) as per direction of EIC. 6-32 SP [ 7 / D- 6]

Supplying and fixing 240V DP Changeover switch with Sheet Steel enclosure on flat iron frame on wall with nuts bolts etc. 32 A [3(a)/D-2] (Make-HPL, Havells, Standard) UPS connection

Supplying and fixing double door sheet steel (16SWG), powder coated cable end box for TPN DB horizontal SPNDB enclosure with IP-42/43 as per GS. 8 Way (horizontal ) [16/D-12]

Supplying and fixing 415V, TPN SFU with sheet steel enclosure on flat iron/angle iron frame on wall with nuts bolts etc incl. S & F 3 nos. DIN type HRC fuse as per rating WITH Angle iron frame. [Make- L&T, Havells] 63 A [4(a)/D-3]

Sub Head -4---Supplying & Laying of Cable Supply and delivery of 3 Core XLPE Insulated & Sheathed Armoured stranded Aluminium Conductor cables for Working Voltage up to 1100 Volts of following sizes. [ Make- Havells/ RR/ KEI or equivelant model As per choice of EIC] 3 Core 10 Sqmm .

Supplying and fixing compression type gland complete with brass gland, rubber ring for dust & moisture proof entry and Finishing the end of following XLPE/PVC armoured cables by crimping method incl. supplying and fixing solderless socket (Dowels make), tapes, anticorrosive paste & jointing materials. 3 Core 10 Sq. mm [7(b)/F-4n & 8-b(xi)/F-5]

Laying of cable as below, after cutting floor /pavement / wall/ and making holes incl., embedding the cable at an average depth as below and mending good the damages to original finish incl. removing the rubbish Incl. following size GI [Hot Dip] Wire as Earthing as per GS. From 2.5 sqmm to 35 sqmm incl earthing attachment in 2x 10 SWG GI [Hot Dip] Wire. [5(i)/F-3 & 118/K-3]

Laying of cable upto 3/4 core 25 sqmm on wall/surface incl. S & F MS saddles with earthing attachment in 10 SWG GI (Hot Dip) Wire, making holes etc. as necy. mending good damages and painting. [ 2(b)/ F- 1 ]

Laying of one No. cable upto 35 sqmm in underground trench 460mm wide x 760 mm average depth, with brick protection on the top of the cable with 8 (eight) Nos. bricks per metre, including filling the space between the brick & cable and also the trench with shifted soil, leveling up and restoring surface duly rammed. [ 1(a)/ F- 2 ]

SUB-HEAD 6--FIXING OF LIGHT FITTINGS. Fixing only single/twin florescent light fitting complete with all accessories Directly on wall/ceiling with HW block and suitable size MS fastener, Ceiling plate, nipples etc. as required.

Fixing only single/twin fluorescent light fitting suspended 25 cm bellow the ceiling with 2 No. 20 mm dia EI conduit (14 SWG) supports fixed with “L” type MS clamp whose one side fixed on ceiling with suitable size 4 nos. fastener and other side connected with the conduit with suitable size of bolts and nuts incl. S&F EI conduit, “L” type (125mmx125mm) 6mm thick and 25mm with MS clamps as per GS. [ 17 /C-2]

Extra for suspension exceeding 25 cm with S&F additional 2 no. 20 mm dia EI conduit (14 SWG) supports & necy. PVC insulated wire and painting etc. as required by 2x24/0.20 mm (1.5sqmm.) flexible copper wire of 1.10 mt. length. [ 16 /C-2]

Supply & Fixing angular batten holder (Anchor) on 75mm dia PVC round block / round bakelite on wall/ceiling. [ 22/D-13 ]

Fixing only lamp. [11/C-2]

SUB-HEAD 5--SUPPLY OF LIGHT FITTINGS. Supply and delivery of twin Industrial type LED luminaries with aluminium extrusion heat sink incl. Supply of 2nos. 20W LED Tube with LED Batten. [Make- SURYA , 2xT-8 cat no.- SLE TL DS 20 P AL EXT & SUB 218 T8 LED or equivalent Philips (TMC 502 2xT-LED 22W, 1200mm 18W 865 T8 I – 2100lm) /CG / Bajaj / Wipro/ Havells as approved by E.I.C] (With 3 yrs warrnty)

Supply and delivery of Single Industrial type LED luminaries with aluminium extrusion heat sink incl. Supply of 1nos. 20W LED Tube with LED Batten. [Make- SURYA , 1xT-8 cat no.- SLE TL DS 20 P AL EXT & SUB 118 T8 LED or equivalent Philips (TMC 502 1xT-LED 22W, 1200mm 18W 865 T8 I – 2100lm)/CG / Bajaj / Wipro/ Havells as approved by E.I.C] (With 3 yrs warrnty)

Supply of 20 W Surface mounted LED 2'x2' light fittings having 110 lm/Watt and CCT-6500K with glare free uniform illumination Incl. necessary connections as per direction of EIC. (make- Surya LED Cat. SLE DS 20 11S-ASTRUM XX or equivalent Philips/CG / Bajaj / Wipro/ Havells as approved by E.I.C] (With 3 yrs warrnty)

Supply and Fixing of 240V, 45 W LED street light with system output of >110 lm/W. Aluminium PDC housing with integrated lens cover that complies with IP66 protection. luminarie complete with all accessories (Make- Surya , cat no.- SLE UL 45W IP66 LXN G1 or equivalent model of Philips (BRP331 LED54 CW R5N PC PSU S1 V1)/Wipro ) on existing MS Pipe/Mini Pole/Long Pole as per direction of E.I.C. (With 5 Yrs Warranty)

Supply of 14W LED bulb [Surya/ Philips/CG / Bajaj / Wipro/ Havells as approved by E.I.C on existing batten holder [NS]

SUB-HEAD 6--FIXING OF FANS. Supplying & Fixing iron beam fan clamp of two piece type, as per approved specification, fabricated from 40 mm x 9 mm MS sheet flat suitable for beam having flange upto 150 mm wide – (As per Drawing no. 476 of PWD Specification Book – May 1991) [ 30/D-14 ]

Providing and fixing extra down rods of 20 mm dia X 1.6 mm thick MS conduit, wiring with copper conductor including painting etc. as required.

Supply & Fixing 240V, Modular Socket (2 Module) type fan regulator (Step type) (Brand approved by EIC) on existing Modular GI switch board as per GS [ 10 / E-18 ]

Fixing only ceiling fan complete with blades, canopy, fork, rubber bush etc as per GS [ 21 (a) / C-3 ]

Engraving the deptt. number with 10 mm lettering on the body as per GS. [ 24 (a) / C-3 ]

Painting upto 10 letters of the engraved number with approved black /red paint as required as per GS [ 26(a)/C-3 ]

Extra for additional one letter incl. hifen, stroke and stop [ 24(b)/C-3 ]

Fixing only cabin fan on wall/ceiling by S&F rag bolts, nuts & washers (6 mm dia x 62 mm long) or as reqd. incl. S&F 24/0.20 PVC insulated flexible copper wire 0.5 mt. length. [ 29/C-4 ]

Fixing only exhaust fan after making hole in wall and making good damages and smooth cement finish etc. as practicable as possible and providing necy. length of PVC insulated wire and making connection for exhaust of following diameter. For 23 cm (9") Exhaust fan. [ 28 (a) / C-4 ]

Fixing only louver shutter/cowl on wall with necy. bolts & nuts (6 mm dia x 62 mm long). For 23 cm (9") Exhaust fan [ 30 (a) / C-4]

SUB-HEAD 7--SUPPLY OF FANS. Supply of 1200 mm sweep ceiling fan complete with C2 Capacitor, blades, canopy, fork, rubber bush etc as per GS (Make - usha striker PWD or equivatent model of Crompton High Speed HS Ceiling Fan Brown as approved by E.I.C.) Warranty 2 Years. [NS]

Supply of 450mm sweep wall bracket fan(high speed) with metal body & blades(Make - EPC or equivatent model of Crompton/ Usha as approved by E.I.C. Warranty 2 Years. [NS]

Supply of Exhaust fans complete with all accessories having the following Model / Cat No. ( Make -EPC ) 9" ( 230mm ) Speed 1370 RPM [NS]

Supplying & Fixing 240 V AC/DC superior type Ding-Dong Call Bell (Anchor) on HW board incl. S&F HW board as per GS [ 20( a )/D-13 ]

Earthing with 50 mm dia GI pipe 3.64 mm thick x 3.04 Mts. Long With TATA-Medium GI pipe as per GS [ 2(a)/G-1]

Extra for providing masonery enclosure on the top of the earth electrode of overall size 86.36 cm x 86.36 cm x 46 cm deep (below ground level) complete with cemented brick work(1:6) of 25 cm width duly plastered with cement morter (inside) Cl hinged inspection cover of size 36.56 cm x 35.56 cm with locking arrangement, GI reducer including drilling of 46 nos. 12 mm dia holes on the GI pipe. [3(a)/G-2]

Excavation of soil for installation of Earth Electrode and filling & ramming. (For Soft Soil) [1(a)/G-1]

Extra for treatment of soil by using salt & charcoal or coke for plate electrode [3(b)/G-2]

Connecting the equipments body to earth busbar including S & F 25 mm x 6 mm galvanised (Hot Dip) MS flat on wall/floor with GI saddles as required and connection to equipments incl. drilling holes, with bolts, nuts, washers etc. [d/G-3] (for Earthing GI pipe to HTPNDB)

Supplying & fixing earth busbar of galvanized (Hot Dip) MS flat 25 mm x 6 mm on wall having clearance of 6 mm from wall including providing drilled holes on the busbar complete with GI bolts, nuts, washers, spacing insulators etc. as required [4(a)/G-2]

N.B: i) Payment will be made after availability of fund from concern Department. ii) Payment will be made as per P.W.D norms. iii) Rate should be quoted including All Taxes and Cess.

Please Enable Macros to View BoQ information