Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹60.5 LAccepted-AOC | L1 | Accepted-AOC BEING L1 | |
| 2 | L2₹63.3 L+₹2.5 L (4.16%)Rejected-Finance | L2 | Rejected-Finance BEING L2 | |
| 3 | L3₹64.2 L+₹3.5 L (5.69%)Rejected-Finance 583 URBAN ESTATE II HISAR 125005 | HISAR | HISAR | HARYANA | 125005 | L3 | Rejected-Finance BEING L3 | |
| 4 | L4₹64.3 L+₹3.6 L (5.87%)Rejected-Finance VPO SATROD KALAN HISAR HARYANA | HISAR | HISAR | HARYANA | L4 | Rejected-Finance BEING L4 | |
| 5 | L5₹66.9 L+₹6.1 L (10.1%)Rejected-Finance | L5 | Rejected-Finance BEING L5 |
Tender Value
₹85.1 L
EMD Value
₹1.5 L
Closing Date
13 Jun 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
CWE HISAR
HQ CWE HISAR HISAR MIL STN HISAR
RESURFACING OF ROADS OF ZONE A UNDER GE (W) HISAR AT HISAR MILITARY STATION
2023_MES_594129_1
CWE/HSR-09 OF 2023-24
Open Tender
Civil Works - Roads
Item Rate
180 days
HISAR MILITARY STATION
AS PER TENDER DOCUMENTS
9 documents required · 9 mandatory
₹1,000
GE (W) HISAR
₹1.5 L
1 Jul 2023
9 May 2023
15 Jun 2023
9 May 2023
13 Jun 2023
30 May 2023
Amount
Scarifying or picking gravelled, macadam or bituminous macadam surfaces in area exc 400 sqm and exe 50mm deep but n.exc 100mm deep
M&L 150mm thick WBM (compacted thickness) laid in two layer .consolidate thickness of each layer is 7.5cm of WBM, with granite/basaltt coarse aggregates of grading 2 (63 to 40mm size) or of grading 3 (50 to 20mm size), spread,rolled and consolidated and rolled to 8 to 10 ton power roller to required gradient and camber .
M&L Premix bituminous, macadam using paving itumen, VG-30, laid with paver and rolled and compacted with 8 to 10 ton powe roller to required gradient and camber (consolidated thickness 75mm or less)
M&L Preparing unsurfaces water bound macadum surface by brushing with wire brushes for removing caked mud etc. sweeping with brooms and finally fanning the cleaned surface with gunny bags to remove all loose dirt etc. ®
M&L for Applying evenly a priming/tack coat with bituminous primer using paving bitumen at 10 kg per 10 sq metre
M&L Repair to potholes any depth, not exc 1 sq m each including sweeping free from dust and mud, or water, scoring sunken surfaces in roads, paths, etc. cutting around edges to at least 25 mm in depth,making good by applying tack coat @ 5 kg per 10 sq m, putting in premixed bituminous macadam, well rammed and sealed with binder 9.8 kg per 10 sq m, blinded with 0.09 cu m of stone chippings, 6.3mm size and again well rammed (including supply of premixed macadam, binder and chippings).depth of potholes exc 30 mm ®
M&L Preparing Black top surface by brushing with wire brushes for removing caked mud etc. sweeping with mechanically brooms and finally fanning the cleaned surface with gunny bags and mechanical air compresur to remove all loose dirt etc.
M&L for Applying evenly by using mechanical sprayer machine ,a priming/tack coat with bituminous primer using paving bitumen VG-10 at 05 kg per 10 sq metre
M&L for 40mm Bituminous premix asphaltic semi dense concrete (40mm consolidated thickness) with minimum 5.5%binder content VG-30 by weight of total mix, laid spread with automatic senser mechanical paver, rolled and compacted wih 8 to 10 ton power roller to required camber and gradient complete Note:- 1, Material shall be mixed in hot&mix plant as Approved , Plant shall be not more 10 year wintage. 2. Cost of transport from to site shall be included in quaoted amount. 3. filler shall be mixed as per desing mix or minimum 2% by weingt of mix.amount of Filler not to be paid seperatelly.
M&L for 30mm Bituminous premix asphaltic semi dense concrete (30mm consolidated thickness) with minimum 5.5%binder content VG-30 by weight of total mix, laid spread with automatic senser mechanical paver, rolled and compacted wih 8 to 10 ton power roller to required camber and gradient complete Note:- 1, Material shall be mixed in hot&mix plant as Approved , Plant shall be not more 10 year wintage. 2. Cost of transport from to site shall be included in quaoted amount. 3. filler shall be mixed as per desing mix or minimum 2% by weingt of mix.amount of Filler not to be paid seperatelly.
Renewing cement concrete tiles 20-25mm thick of Size 300mmX300mm in patches, area in n.exc 5 sq.m. including removing and cleaning old tiles, preparing beds and laying or setting over 20mmthick screed bed of CM(1:4), jointing and pointing new or old tiles complete NOTE : If new tiles are required at site for repair during execution of work, the qty of new tiles will be measured and paid separately under supply only item.
Supply only coloured Chequered cement concrete tiles 30cm x 30cm x25mm thick with pigment. Chemically treated, heavy duty
Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete including taking out old/ existing Kerb stone and remove from site as directed.
Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour,design & pattern as in footparth, parks,lawns, drive ways or light traffic parking etc.,of required strength, thickness & size/shape, made by table vibratory method using PU mould, laid in required colour & patternover and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand;
Providing and laying 80mm thick factory made chamfered edge cement concrete paver block of M-30 grade with approved colour,design & pattern as in footparth, parks,lawns, drive ways or light traffic parking etc.,of required strength, thickness & size/shape, made by table vibratory method using PU mould, laid in required colour & patternover and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand;
Demolition of stone slabs and tiles of any description or thickness in floors, aprons Laid, bedded and pointed in any mortar etc.
M&L for chequered cement concrete tiles, chemicaly treated, mechanicaly machine pressed, heavy duty of size 30cmx30cmx25mm thick, set, jointed and pointed in neat cement slurry with grey cement and with pigments in floor complete all as specified over and including 15mm thick screed bed in CM 1:4 complete
M&L for 75mm Cement concrete type D- 2,1:4:8 (40mm graded aggregate) as in sub base
Supply and fixing as in Repair metal tubular dealineator made out of ABS round body fitted with 2 Nos 65 mm dia highly reflective reflectors made out of PMMA and mounted on 45/50 mm dia mild steel pipe of 600 mm height duly powder coated and thermo plastic elastomer 3 bands of green, red and yellow reflector radium tape of 25 mm wide strips with anti theft steel net for reflector protection including embedding in PCC 1:2:4 (150x150x300mm) type B1 complete all as specified and directed including taking down of existing delinator of any type.
Supply and fixing as in repair cat eye solar reflective type of metal body alloy of size 100mm x 100mm x 20mm with PAMA striplens reflector of model No. DA 972.0 fixed with and incl MS stud of suitable size as per manufactures instructions
M & L for preparing bituminous surfaces of road and marking 2.5mm thick centre lines, stop lines, dashes, arrows etc. and the like n. exc 10cm wide on roads pavements with hot applied thermo plastic road marking paint of approved colour confirming to BS 3262-1989 with special applicator machine all as per manufacturers instruction complete all as specified and directed.
M&L for Two coat of synthetic enamel paint on stone /concrete/ bricks surface inclding preparation of New Surfaces of any description, over 10cm in width or girth,not otherwisedescribed
M&L for one coat of synthetic enamel paint on stone /concrete/ bricks old surface inclding preparation of old Surfaces of any description, over 10cm in width or girth,not otherwisedescribed
Supply and fix in repair solar cat eye aluminum alloy shall (100% water proofing design according to 65) of size 125mm x 125mm x 25mm (shank 65mm) of high efficiency Mono rystafie solar panel 2.4V/0.3 watt one NI-ed rechargeable battery (1.2V/1600MA) consisting of super bright LED with 10,000 to 18,000 mcd completed as per manufactures instructions etc. all as specified anddirected including taking down exiting careye of any type
M/S SHAKTI BUILDERS
Siya constructions
M/S RAJINDER SINGH
M/S RAJESH KUMAR & SONS
PAWAN KUMAR
BAL SINGH AND SONS
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .