Repair of SE Residence R-1 in Canal Colony, Narnaul

Amount

Removing door and windows (wood and steel)with chowkats by making recesses in walls when the walls are not to be dismantled.(HSR item No.8.18-a). (i)Door

(ii) Window

(iii) Ventilator

Steel Chowkats door and window frame of size 114mm X50mm with 35mm wide double rebate.(HSR item No.18.34-d)

Factory Manufactured solid glazed door shutter of Comm. Hard wood (17.930a(III) 25mm thick 17.18 note (i)

Factory manufactured panelled door of glazed window shutter of Comm. Hard wood (17.90-b) 35mm thick 17.18note(i)

Factory manufactured wire gauge door and shutter of comm. hard wood (HSR item No.17.92(II)17.18note)

Cost of Aluminium fitting door & windows (HSR item No.17.72-a)

Supply & fixing hydraulic door closer (HSR item No.17.82-c)

Providing & fixing sliding bolt with nut and screw (HSR item No.17.83-b)

Providing & Fixing 150mm floor brass stopper (HSR item No.17.75)

Providing & Fixing GI sheet 0.80mm thick sliding shutter (HSR item No.18.17)Cup Board /Almirah in bed room

Granite marble on shelf of kitchen (HSR item No.14.49c)

Scraping of cement plaster (HSR item No.8.32-c)

12mm thick Cement plaster 1:5 (HSR item No.15.6)

Supply and erection of PVC Conduit pipe ISI Mark(HSR item No.31.44-b)25mm dia.

Supply and erection of PVC unsheathed Copper Conductor Cable Single Core 1100 volts (HSR item No.31.40) (A) Cable Size 1.5mm (3/0.81mm) HSR Item No. (31.40(i)

(B) Cable Size 2.5mm (3/1.05mm) HSR Item No. (31.40(i)

P&F G.I Sheet metal boxes with inner and outer face plate (HSR item No.31.57) (i) 1&2 modules

(ii) 3 Modules

(iii) 4 Modules

(iv) 6 Modules

(v) 8 Modules

P&F Modular type all accessories (HSR item No.3156) (i) 10Amp.,1Way Switch

(ii) 20Amp., Switch

(iii) 10Amp., Socket

(iv)16Amp., Socket

(v) Bell Push

(vi) Fan Regulator

(vii) Call Bell

(viii) Blinking Plate

Supply and erection of weather MCB Box. (HSR item No.31.50)

Supply and erection of Double Door sheet (HSR item No.31.41-iv)

Providing PVC pipe3/4"(NS item)

Brass elbow

Brass Tee

Plane elbow

Plane Tee

Concealed Valve

Brass Socket Male

Brass Socket Female

Providing and fixing in position 15mm i/d C.P brass bib cocks of best quality long body (HSR item No.30.75-a)

Providing and fixing in position automatic brass ball valves in tanks 25mm internal diameter (HSR item No.30.110-b)(iii)

Providing and fixing in position Hook

Providing and fixing in position best Indian make towel rails 20mm dia C.P. brass adjustable fixed in with raw slugs embedded in walls with C.P brass screws (HSR item No.30.68-ii)

Providing and fixing in position glass shelf with C.P brass brackets and guard rail 600mmx125mm fixed in with rowel plugs with c.p brass screws complete including cutting and making goods the walls etc. (HSR item No.30.69-A(i))

Providing and fixing in position best Indian make soap dish fixed into wall with C.P brass screws and complete in all respects including cutting and making good the wells etc.(HSR item No.30.70-a(i))

C.P Jail

Providing and fixing in position waste pipe (N.S item)

Providing and fixing in position best Indian make (ordinary)lavatory suites size 630mmx450mm with one no.tap (HSR item No.30.41(iii))

Providing and fixing in position best Indian make shower with 15or 20 I/D in-Let C.P brass with revolving joint (HSR item No.30.66-c)

Providing and fixing in position C.P brass 15mm Concealed stop cock with flange (HSR item No.30.76-a(ii))

Providing and fixing in position best quality stainless steel sinks 600mmx450mmx200mm with complete fittings (HSR item No.30.53-a)

Cutting chase in brick walls in cement or in floor for embedding G.I of H.C.I pipe /PVC lines & making good the same to its original condition (HSR No.30.95) c) size 75x50mm

Dismantling Tile Terracing in mud (HSR item No. 8.5-d)

Tile Terracing consisting of tiles 22.86cmX11.43cmX3.81cm laid over 87.50mm mud filling on a layer of 25mm mud plaster and on other layer of mud mortar for laying the tiles, including two coasts of bitumen laid hot at 1.65kg per Sqm on top of R.C.C slab including grouting with cement sand mortar 1:3 and top surface to be left clean etc.(HSR item No.13.13)

Supplying and fixing glass panes, including special metal sash putty of approved make b) Glass panes 4mm thick, exceeding 40 Sqm areas (HSR No. 18.30-b)

Cement concrete 1:2:4 gola 10cmX10cm quadrant along junction of roof with parapet wall finished smooth, where specially specified.(HSR item No.13.64)

P&F top khurra 0.6m x 0.6m for rain water pipe in 25mm thick cement concrete 1:2:4 over 50mm thick cement concrete 1:8:16 (HSR item No.13.50)

Providing & fixing inter locking tiles of 60mm thick(HSR item No.10.158)

Providing and fixing PVC rain water pipe (HSR item No.13.89-a)

Providing and fixing PVC bend ISI marka (HSR item No.13.90-a)

Preparation of plastered surface for distempering including sand papering the surface, applying filling with approved quality filler, consisting of plaster of Paris and chalk mitti including finishing the surface to the required finish complete.(HSR item No.16.51)

White Washing (HSR item No.16.47)

Preparation of plastered surface by applying two coat white cement based putty. (HSR 16.81)

Distempering with washable oil bound distemper (of approved manufacture)two coats on old distempered work (HSR item No.16.60)

Finishing walls with exterior decorative cement based paints such as snowcem, Robbiacem etc. on old work, one coat to give an even shade (HSR item No.16.62)

Painting two coats excluding priming coat with synthetic enamel paint in all shades on old/new work or metallic or plastered or concrete surfaces to give an even shade (HSR item No.16.30)

Fixing M.S angle and T-iron frames for door, windows and ventilator including iron hold fast, butt hinges of I.S.I mark fixed in position with machine screws and duly welded including all other suitable locking arrangements provided and welded with the frame and making holes and fixing glazing clips in the frame, filling the welds and finished with a coat of red lead non setting primer complete in all respects (HSR item No.18.35)

Earth filling involving excavation of earth, carriage with an Av. Lead of 495m filling under floors and in the campus in 25Cm thickness watering and compacting complete to the entire satisfaction of Engineer in-charge (Earth Should be Good Earth)

Wire Gauge of 140G or 120G. (HSR 18.32)

Providing & Fixing first quality ceramic/glazed wall tiles confirming to IS 15622 of approved make in all colours of any size as approved by Enginer- In-Charge in skirting/dados over bed of 12mm thick cement coarse sand mortar 1:3 and jointed with grey cement slurry including pointing in white cement mixed with pigment to match the shade of tiles (HSR No. 14.92 (b))

P&F vitrified tiles of size 600x600 mm of approved make in flooring laid in any pattern as specified over base of 20mm thick cement coarse sand mortar 1:3 and joined with white cement slurry, Note:- Tiles shall be of premium quality (1st Class) of reputed manufacture like NITCO, KAJARIA, SOMANI, ORIENT & JOHANSONS (HSR No. 14.89)

P&F vitrified tiles of size 600x600mm of approved make in skirting/dado laid in any pattern as specified over base of 12mm thick cement coarse sand mortar 1:3 and jointed with white cement slurry mixed with pigment to match the shade to tiles. Note:- Tiles shall be of premium quality (1st Class) of reputed manufacture like NITCO, KAJARIA, SOMANI, ORIENT & JOHANSONS (HSR No. 14.90)

Credit of tiles

Credit of old wooden window/door/ Ventilator and chowkhat including wire mesh, grills [Excluding All Aluminium Doors, windows & Ventilators etc]

Bagotia Placement Agency