Construction of Balance Work of Residential (Type II-134 Nos Type III-60 Nos, Type V-04 Nos) and Non Residential Building,Development Work at Humhama,

ITEM No. AMOUNT AMOUNT (in

(DSR/MR)

Unit Qty. DSR/MR Rate

(in Rs.) (DSR) Rs.) (NON- DSR)

2.0 EARTH WORKS

Earth work in excavation by mechanical means (Hydraulic excavator) / manual

means over areas (exceeding 30cm in depth, 1.5m in width as well as 10 sqm on

2.6 plan) including getting out and disposal of excavated earth, lead up to 50m and for

all lift, as directed by Engineer-in-Charge.

2.6.1 All kinds of soil Cum 1753.51 177.50 311247.96

Earth work in excavation by mechanical means (Hydraulic excavator)/ manual

means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on

2.7 plan) including getting out and disposal of excavated earth lead upto 50 m and lift

upto 1.5 m, as directed by Engineer-in-charge.

2.7.1 Ordinary rock Cum 46.37 498.90 23136.16

Earth work in excavation by mechanical means (Hydraulic excavator) / manual

means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on

2.8 plan), including dressing of sides and ramming of bottoms, for all lift, including

getting out the excavated soil and disposal of surplus excavated soil as directed,

within a lead of 50 m.

2.8.1 All kinds of soil Cum 1252.83 260.30 326111.65

Extra for every additional lift of 1.5 m or part thereof in excavation /banking

excavated or stacked materials.

2.26.1 All kinds of soil

1.5m to 3.0m Cum 406.91 126.80 51595.55

3.0m to 4.5m Cum 113.68 253.60 28828.49

Filling available excavated earth (excluding rock) in trenches, plinth, sides of

2.25 foundations etc. in layers not exceeding 20cm in depth, consolidating each Cum 611.82 196.00 119917.41

deposited layer by ramming and watering, lead up to 50 m and lift up to 1.5 m.

Carriage of Earth by mechanical transport including loading, unloading and Stacking

including royalty & carriage up to 5 KM complete.

Carriage of Excavated rock by mechanical transport including loading, unloading

and Stacking including royalty & carriage up to 5 KM complete.

Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and

saplings of girth up to 30 cm measured at a height of 1 m above ground level and

2.31 removal of rubbish up to a distance of 50m outside the periphery of the area Sqm 168.00 17.60 2956.8

cleared.

Digitally signed by Om Prakash

Date: 2025.07.18 21:56:26 IST

Felling trees of the girth (measured at a height of 1 m above ground level), including

2.33 cutting of trunks and branches, removing the roots and stacking of serviceable

material and disposal of unserviceable material

2.33.1 Beyond 30 cm girth upto and including 60 cm girth Each 20.00 532.35 10647

2.33.2 Beyond 60 cm girth upto and including 120 cm girth Each 15.00 2373.50 35602.5

2.33.3 Beyond 120 cm girth upto and including 240 cm girth Each 8.00 11020.15 88161.2

2.33.4 Above 240 cm girth Each 5.00 22075.20 110376

TOTAL (Carried Over to Summary of Civil Works) 1630066.47 0

4.0 CONCRETE WORKS

Providing and laying in position cement concrete of specified grade excluding the

4.1 cost of centering and shuttering - All work up to plinth level :

1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded

4.1.8 stone aggregate 40 mm nominal size derived from natural sources). Cum 280.18 6812.00 1908613.41

Providing and laying cement concrete in retaining walls, return walls, walls (any

thickness) including attached pilasters, columns, piers, abutments, pillars, posts,

4.2 struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor

blocks, plain window sills, fillets, sunken floor, etc., up to floor five level, excluding

the cost of centering, shuttering and finishing :

1:2:4 (1 Cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded

stone aggregate 20 mm nominal size derived from natural sources)

Centering and shuttering including strutting, propping etc. and removal of form work

4.3.1 Foundations, footings, bases for columns. Sqm 680.19 392.15 266736.51

TOTAL (Carried Over to Summary of Civil Works) 5529991.42 0

5.0 REINFORCED CEMENT CONCRETE WORK

5.90 Centering and shuttering including strutting, propping etc. and removal of form for :

5.9.1 Foundations, footings, bases of columns, etc. for mass concrete Sqm 36.54 392.15 14329.16

Walls (any thickness) including attached pilasters, butteresses, plinth and string

courses etc.

5.9.3 Suspended floors, roofs, landings, balconies and access platform Sqm 181.46 927.25 168260.82

5.9.5 Lintels, beams, plinth beams, girders, bressumers and cantilevers Sqm 8.06 736.40 5938.33

5.9.6 Columns, Pillars, Piers, Abutments, Posts and Struts Sqm 14.40 961.30 13842.72

5.9.16 Edges of slabs and breaks in floors and walls

5.9.16.1 Under 20 cm wide metre 89.84 208.55 18736.13

Digitally signed by Om Prakash

Date: 2025.07.18 21:56:26 IST

Providing precast cement concrete Jali 1:2:4 (1 cement : 2 coarse sand (zone-III) : 4

graded stone aggregate 6 mm nominal size ), reinforced with 1.6 mm dia mild steel

5.18 wire, including centering and shuttering, roughening cleaning, fixing and finishing in

cement mortar 1:3 (1 cement: 3 fine sand) etc. complete, excluding plastering of the

jambs, sills and soffits.

5.18.1 50 mm thick Sqm 1280.20 1886.90 2415613.15

Steel reinforcement for R.C.C. work including straightening, cutting, bending,

placing in position and binding all complete upto plinth level.

5.22.6 Thermo-Mechanically Treated bars of grade Fe-500D or more. kg 24478.42 107.85 2639997.81

Steel reinforcement for R.C.C. work including straightening, cutting, bending,

placing in position and binding all complete above plinth level.

5.22A.6 Thermo-Mechanically Treated bars of grade Fe-500D or more. kg 14350.00 107.85 1547647.5

Providing and laying in position ready mixed or site batched design mix cement

concrete for reinforced cement concrete work; using coarse aggregate and fine

aggregate derived from natural sources, Portland Pozzolana / Ordinary Portland

/Portland Slag cement, admixtures in recommended proportions as per IS: 9103 to

accelerate / retard setting of concrete, to improve durability and workability without

impairing strength; including pumping of concrete to site of laying, curing, carriage

for all leads; but excluding the cost of centering, shuttering, finishing and

reinforcement as per direction of the engineer-in-charge; for the following grades of

concrete. Note: Extra cement up to 10% of the minimum specified cement content in

design mix shall be payable separately. In case the cement content in design mix is

more than 110% of the specified minimum cement content, the contractor shall

have discretion to either re-design the mix or bear the cost of extra cement

5.33.1 All works upto plinth level

5.33.1.1 Concrete of M25 grade with minimum cement content of 330 kg /cum Cum 200.00 9504.75 1900950

5.33.2 All works above plinth level upto floor V level

5.33.2.1 Concrete of M25 grade with minimum cement content of 330 kg /cum Cum 139.32 9860.40 1373771.63

Digitally signed by Om Prakash

Date: 2025.07.18 21:56:26 IST

Rebar-Providing and supplying heavy duty HILTI HIT-RE500 V4 (Resin Epoxy

Chemical) with Steel Rebar. The product should be approved by ETA, TR 069, ICC,

CSTB, COLA, BZS with Shock approval, Seismic approval in Rebars to use in

cracked/un-cracked concrete, tested for service temperature of -40deg C to +80

deg C. The chemical should have ETA for service life of 100 years and is to be

tested for water tightness. The installation depth shall be supported by design

based on EC2/TR069/ HIT-Rebar Design Method using Profis Rebar Software and

approved by Structure Enginer- incharge. Drilling hole with double flute type drill

bits/hollow drill bits to the required depth by rotary hammer drill, cleaning with brush

and jet of clean air, filling resin and hardener using serrated nozzle to eliminate

mixing error with standard HDE A12 battery dispenser along with piston plug and

extension hose for longer depths to ensure no air bubbles are in the hole and then

fixing with Rods, conducting occasional site inspection, executing work by trained

personnel and occasional supervision from the manufacturer’s representative in

India. The installation and the setting instructions should be strictly followed as per

the manufacturer’s recommendations. Pull out test report shall be submitted to the

Structure engineer to validate the installation quality.

MRC-1 16mm dia rebar at 200mm depth Each 135.00 1250.00 168750

MRC-2 20mm dia rebar at 250mm depth Each 108.00 1850.00 199800

MRC-3 25mm dia rebar at 365mm depth Each 81.00 2450.00 198450

MRC-4 32mm dia rebar at 400mm depth Each 54.00 2850.00 153900

Providing, mixing and applying bonding coat of approved adhesive on chipped

26.31 portion of RCC as per specifications and direction of Engineer In-charge complete

in all respect.

SBR Polymer (@10% of cement weight) modified cementitious bond coat @ 2.2 kg

26.31.1 cement per sqm of surface area mixed with specified proportion of approved Sqm 260.00 141.20 36712

polymer

Epoxy bonding adhesive having coverage 2.20 sqm/kg of

approved make

TOTAL (Carried Over to Summary of Civil Works) 10644350.25 720900

6.0 BRICK WORK

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation

7.5 in foundation and plinth in:

6.1.2 Cement mortar 1:6 (1 cement : 6 coarse sand) Cum 363.22 7132.25 2590547.32

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation

6.4 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in :

6.4.2 Cement mortar 1:6 (1 cement : 6 coarse sand) Cum 144.45 9105.95 1315351.2

Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class

designation 7.5 in superstructure above plinth level up to floor V level.

6.13.2 Cement mortar 1:4 (1 cement :4 coarse sand) Sqm 265.00 1123.80 297807

Digitally signed by Om Prakash

Date: 2025.07.18 21:56:26 IST

Extra for providing and placing in position 2 Nos. 6mm dia. M.S. bars at every third

course of half brick masonry (with F.P.S. bricks).

TOTAL (Carried Over to Summary of Civil Works) 4231477.52 0

8.0 MARBLE & GRANITE WORK

Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and

prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias

and similar locations of required size,approved shade, colour and texture laid over

8.2 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with

white cement, mixed with matching pigment, epoxy touch ups, including rubbing,

curing, moulding and polishing to edges to give high gloss finish etc. complete at all

levels.

8.2.1 Raj Nagar Plain white marble/ Udaipur green marble/ Zebra black marble

8.2.1.1 Area of slab upto 0.50 sqm Sqm 56.78 3414.80 193906

8.2.1.2 Area of slab over 0.50 sqm Sqm 505.62 3078.40 1556488.29

8.2.2 Granite stone slab colour black, Cherry/Ruby red

8.2.2.2 Area of slab over 0.50 sqm (For Counter) Sqm 20.81 5136.30 106876.13

Providing edge moulding to 18 mm thick marble stone counters, Vanities etc.,

8.3.2 including machine polishing to edge to give high gloss finish etc. complete as per metre 814.04 510.95 415933.74

design approved by Engineer-in-Charge. Granite work

Extra for providing opening of required size & shape for wash basins/ kitchen sink in

kitchen platform, vanity counters and similar location in marble/Granite/Stone work

8.5 including necessary holes for pillar taps etc. including rubbing and polishing of cut Each 420.00 978.70 411054

edge etc. complete.

Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622

(thickness to be specified by the manufacturer), of approvedmake, in all colours,

shades except burgundy, bottle green, black of any size as approved by Engineer-in-

8.31 Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement Sqm 5566.03 1267.95 7057443.17

mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg

per sqm, including pointing in white cement mixed with pigment of matching shade

complete.

TOTAL (Carried Over to Summary of Civil Works) 9741701.33 0

9.0 WOOD & PVC WORK

Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I)

non-decorative type, core of block board construction with frame of 1st class hard

9.21 wood and well matched commercial 3 ply veneering with vertical grains or cross

bands and face veneers on both faces of shutters:

9.21.1 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws Sqm 2130.24 2392.65 5096918.74

Digitally signed by Om Prakash

Date: 2025.07.18 21:56:26 IST

Extra for providing lipping with 2nd class teak wood battens 25 mm minimum depth

9.23 on all edges of flush door shutters (over all area of door shutter to be measured). Sqm 2130.24 462.35 984916.46

Providing and fixing M.S. grills of required pattern in frames of windows etc. with

9.48 M.S. flats, square or round bars etc. including priming coat with approved steel

primer all complete.

9.48.1 Fixed to steel windows by welding Kg 17627.27 219.10 3862133.76

Providing and fixing ISI marked oxidised M.S. tower bolt black finish, (Barrel type)

with necessary screws etc. complete (Copper oxidised as per IS 1378)

9.63.3 150x10 mm Each 3182.00 59.45 189169.9

Providing and fixing ISI marked oxidised M.S. handles conforming to IS:4992 with

necessary screws etc. complete (Copper oxidised as per IS 1378)

9.66.2 100 mm Each 3182.00 32.55 103574.1

Providing and fixing oxidised M.S. casement stays (straight peg type) with

necessary screws etc. complete. (Copper oxidised as per IS 1378)

9.68.2 250 mm weighing not less than 150 grams Each 826.00 61.05 50427.3

Providing and fixing aluminium sliding door bolts, ISI marked anodised anodic

9.96 coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required

colour or shade, with nuts and screws etc. complete :

9.96.1 300x16 mm Each 1172.00 303.25 355409

Providing and fixing aluminium tower bolts ISI marked anodised (anodic coating not

9.97 less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or

shade with necessary screws etc. complete :

9.97.1 300x10 mm Each 3032.00 130.10 394463.2

9.97.4 150x10 mm Each 180.00 82.55 14859

Providing and fixing aluminium handles of approved make anodized (anodic coating

9.100 not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour

or shade with necessry screws etc. complete.

9.100.1 125 mm Each 3032.00 66.25 200870

9.100.2 100 mm Each 180.00 59.55 10719

Providing and fixing aluminium hanging floor door stopper ISI marked anodised

9.101 (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to

required colour and shade with necessary screws etc. complete.

9.101.1 Single rubber stopper Each 1104.00 39.60 43718.4

Providing and fixing aluminium extruded section body tubular type universal

hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body,

9.84 door weight upto 36 kg to 80 kg and door width from 701 mm to 1000 mm), with Each 1516.00 983.15 1490455.4

double speed adjustment with necessary accessories and screws etc. complete.

Providing and fixing aluminium casement stays, ISI marked, anodised (anodic

9.102 coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required Each 50.00 71.50 3575

colour and shade, with necessary screws etc. complete.

Digitally signed by Om Prakash

Date: 2025.07.18 21:56:26 IST

Providing and fixing bright finished 100 mm mortice lock with 6 levers without pair of

9.113 handles of approved quality for aluminium door, with necessary screws etc Each 208.00 850.05 176810.4

complete as per direction of Engineer- in-charge

Providing & Fixing decorative high pressure laminated sheet of plain / wood grain in

gloss / matt/ suede finish with high density protective surface layer and reverse side

9.127 of adhesive bonding quality conforming to IS : 2046 Type S, including cost of

adhesive of approved quality.

9.127.2 1.0 mm thick Sqm 4260.48 897.30 3822928.7

Providing and fixing factory made single extruded WPC (Wood Polymer Composite)

solid door/window/Clerestory windows & other Frames/Chowkhat comprising of

virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and

natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives

(maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying

PVC solvent cement and screwed with full body threaded star headed SS screws

having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N

(Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modulus of

elasticity 900 N/mm2 and resistance to spread of flame of Class A category with

property of being termite/borer proof, water/moisture proof and fire retardant and

fixed in position with M.S hold fast/lugs/SS dash fasteners of required dia and

length complete as per direction of Engineer-In- Charge. (M.S hold fast/lugs or SS

dash fasteners shall be paid for separately). Note: For WPC solid door/window

frames, minus 5 mm tolerance in dimensions i.e depth and width of profile shall be

acceptable. Variation in profile dimensions on plus side shall be acceptable but no

extra payment on this account shall be made.

26.86.1 Frame size 45 x 70 mm metre 2039.40 705.85 1439510.49

Providing and fixing factory made single extruded WPC (Wood Polymer Composite)

solid plain flush door shutter of required size comprising of virgin polymer of K value

58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice

husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100

gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800

N (Face)

26.87 & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity

850 N/mm2 and resistance to spread of flame of Class A category with property of

being termite/borer proof, water/moisture proof and fire retardant and fixing with

stainless steel butt hinges of required size with necessary full body threaded star

headed counter sunk S.S screws, all as per direction of Engineer-In- Charge. (Note:

stainless steel butt hinges and necessary S.S screws shall be paid separately)

26.87.1 30 mm thick Sqm 648.90 4346.70 2820573.63

Providing and fixing IS : 12817 marked stainless steel butt hinges with stainless

steel screws etc. complete :

9.70.2 100X58X1.90 mm Sqm 1236.00 107.10 132375.6

Digitally signed by Om Prakash

Date: 2025.07.18 21:56:26 IST

Wooden Wardrobe

Providing and fixing wardrobe,storage cabinet, over head cabinet, dress units

made of 19mm thick comm. board on top, bottom, sides, partitions, shelves,

shutters,12 mm thick commercial ply for sides & back of drawer, 6mm thick

commercial ply at back of cabinet & bottom drawers, 4.0mm thick veneer on

MRC-5 shutters & exposed sides and top of cabinets wherever required, 1 mm thick Sqm 43.81 9500.00 416157

balancing laminate in unexposed inner faces, including Ivory coast teak wood

lipping, melamine polishing, hinges, ball catchers, tower bolts, handles/knobs, multi

purpose locks,sliding chanel, etc. complete as per design and drawing. ( only

surface area of Shutter ie elevation to be measured and paid for )

Kitchen Modular

Providing 600 mm deep modular kitchen cabinet 850mm high rested at floor, made

of 19mm thick prelaminated MDF board on top, bottom, sides, partitions, shelves,

post formed edge for shutters, 12 mm thick prelaminated MDF board for sides &

back of drawers, 6mm thick prelaminated MDF board at back of cabinet & bottom

MRC-6 drawers, PVC edge binding on exposed edges of boards , including drain board Sqm 36.30 14500.00 526277.5

clip on hinges, ball catchers, handles/knobs, powder coated sliding channel,

multipurpose lock , stainless steel accessories etc. complete as per design and

drawing. All hardware's to be Brushed Stainless Steel finish. ( only length in

elevation will be measured and paid for ) excluding cost of top granite.

TOTAL (Carried Over to Summary of Civil Works) 21193408.08 942434.5

10.0 STEEL WORK

Structural steel work riveted, bolted or welded in built up sections, trusses and

10.2 framed work, including cutting, hoisting, fixing in position and applying a priming kg 5200.00 133.70 695240

coat of approved steel primer all complete.

Providing and fixing 1 mm thick M.S. sheet door with frame of 40x40x6mm angle

10.5 iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings 0

complete, including applying a priming coat of approved steel primer.

10.5.1 Using M.S. angels 40x40x6 mm for diagonal braces Sqm 2.52 5804.35 14626.96

Providing and fixing factory made ISI marked steel glazed doors, windows and

ventilators, side /top /centre hung, with beading and all members such as F7D,F4B,

K11 B and K12 B etc. complete of standard rolled steel sections, joints mitred and

10.11 flash butt welded and sash bars tenoned and riveted, including providing and fixing 0

of hinges, pivots, including priming coat of approved steel primer, but excluding the

cost of other fittings, complete all as per approved design, (sectional weight of only

steel members shall be measured for payment).

Fixing with 15x3 mm lugs 10 cm long embedded in cement

10.11.1 concrete block 15x10x10 cm of C.C. 1:3:6 (1 Cement : 3 coarse kg 13351.21 131.05 1749676.33

sand : 6 graded stone aggregate 20 mm nominal size)

Digitally signed by Om Prakash

Date: 2025.07.18 21:56:26 IST

Extra for providing and fixing steel beading of size 10 x 10 x 1.6 mm (box type),

10.12 approved shape and section with screws instead of glazing clips and metal sash metre 5177.42 49.60 256800.23

putty, in steel doors, windows, ventilators and composite units.

Providing and fixing pressed steel door frames conforming to IS: 4351,

manufactured from commercial mild steel sheet of 1.60 mm thickness, including

hinges, jamb, lock jamb, bead and if required angle threshold of mild steel angle of

section 50x25 mm, or base ties of 1.60 mm, pressed mild steel welded or rigidly

10.14 fixed together by mechanical means, including M.S. pressed butt hinges 2.5 mm 0

thick with mortar guards, lock strike-plate and shock absorbers as specified and

applying a coat of approved steel primer after pre-treatment of the surface as

directed by Engineer-in-charge:

10.14.2 Profile C 0

10.14.2.1 Fixing with adjustable lugs with split end tail to each jamb. metre 5651.20 611.75 3457121.6

Steel work welded in built up sections/ framed work including cutting, hoisting, fixing

10.25 in position and applying a priming coat of approved steel primer using structural 0

steel etc. as required

10.25.2 In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works. Kg 21678.30 172.60 3741674.58

Providing and fixing carbon steel galvanised ( minimum coating 5 micron) dash

fastener of 10 mm dia double threaded 6.8 grade (yield strength 480N/mm2),

10.27 counter sunk head, comprising of 10 mm dia polyamide PA 6 grade sleeve, 0

including drilling of hole in frame , concrete/ masonry, etc.

as per direction of Engineer-in-charge.

10.27.1 10 x 60 mm Each 87.00 131.10 11405.7

Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes,

channels, plates etc., including welding, grinding, buffing, polishing and making

curvature (wherever required) and fitting the same with necessary stainless steel

nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless

10.28 steel dash fasteners , stainless steel bolts etc., of required size, on the top of the kg 784.83 772.40 606202.69

floor or the side of waist

slab with suitable arrangement as per approval of Engineer-in-charge, (for payment

purpose only weight of stainless steel members shall be considered excluding fixing

accessories such as nuts, bolts, fasteners etc.).

Providing & fixing fly proof wire gauze to windows, clerestory windows & doors with

10.29.2 M.S. Flat 15x3 mm and nuts & bolts complete. Stainless steel (grade 304) wire Sqm 1168.33 1133.55 1324364.1

gauze of 0.5 mm dia wire and 1.4 mm aperture on both sides

Providing & fixing glass panes with putty and glazing clips in steel doors, windows,

clerestory windows all complete with : 0

10.30.2 5.5 mm thick glass panes Sqm 1335.12 1390.15 1856018.74

Digitally signed by Om Prakash

Date: 2025.07.18 21:56:26 IST

Providing orange colour safety foot rest of minimum 6 mm thick plastic

encapsulated as per IS : 10910, on 12 mm dia steel bar conforming to IS: 1786,

having minimum cross section as 23mm x 25mm and over all minimum length 263

mm and width as 165 mm with minimum 112 mm space between protruded legs

having 2 mm tread on top surface by ribbing or chequering besides necessary and

19.16 adequate anchoring projections on tail length on 138 mm as per standard drawing Each 76.00 553.70 42081.2

and suitable to with stand the bend test and chemical resistance test as per

specifications and having manufacture's permanent identification mark to be visible

even after fixing, including fixing in manholes with 30x20x15 cm cement concrete

block 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal

size) complete as per design.

Providing and fixing in position pre-cast R.C.C. manhole cover and frame of

required shape and approved quality 19.19.1 L D- 2.5 H D - 20 0

19.19.3.1 Circular shape 560 mm internal diameter Each 8.00 1675.70 13405.6

Making soak pit 2.5 m diameter 3.0 metre deep with 45 x 45 cm dry brick honey

19.32 comb shaft with bricks and S.W. drain pipe 100 mm diameter, 1.8 m long complete 0

as per standard design.

With common burnt clay F.P.S. (non modular) bricks of

class designation 7.5

TOTAL (Carried Over to Summary of Civil Works) 13795479.63 0

11.0 FLOORING WORK

Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with

grey cement slurry mixed with pigment to match the shade of the slab, including

11.26 rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4

coarse sand) :

11.26.1 25 mm thick Sqm 1700.02 1948.25 3312066.11

Kota stone slabs 20 mm thick in risers of steps, skirting, dado and pillars laid on 12

mm (average) thick cement mortar 1:3 (1 cement: 3 coarse sand) and jointed with

11.27 grey cement slurry mixed with pigment to match the shade of the slabs, including Sqm 165.70 2354.70 390162.96

rubbing and polishing complete.

11.31 Extra for pre finished nosing in treads of steps of Kota stone/ sand stone slab. metre 1157.02 191.40 221452.86

Extra for Kota stone/ sand stone in treads of steps and risers using single length

above normal size up to 2.00 metre.

Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be

specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved

make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick

11.37 cement mortar 1:4 (1 Cement : 4 Coarse sand), Jointing with grey cement slurry @ Sqm 9643.56 1096.55 10574642.76

3.3 kg/sqm including pointing the joints with white cement and matching pigment

etc., complete.

Digitally signed by Om Prakash

Date: 2025.07.18 21:56:26 IST

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by

the manufacturer) with water absorption less than 0.08% and conforming to IS:

15622, of approved make, in all colours and shades, laid on 20 mm thick cement

11.41 mortar 1:4 (1 cement : 4 coarse sand), jointing 0

with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white

cement and matching pigments etc., complete.

11.41.2 Size of Tile 600x600 mm Sqm 497.72 1553.45 773175.68

Providing and laying Vitrified tiles in different sizes (thickness to be specified by

manufacturer), with water absorption less than 0.08 % and conforming to I.S.

15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12

11.46 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey 0

cement slurry @ 3.3 kg/ sqm including grouting the joint with white cement &

matching pigments etc. complete.

11.46.2 Size of Tile 600x600 mm Sqm 43.78 1623.05 71057.13

Providing and laying Polished Granite stone flooring in required design and

patterns, in linear as well as curvilinear portions of the building all complete as per

the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick

11.56 base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement 0

slurry and pointing with white cement slurry admixed with pigment of matching

shade including rubbing , curing and polishing etc. all complete as specified and as

directed by the Engineer-in-Charge.

Polished Granite stone slab of colour Black, Cherry/Ruby

Red or equivalent

11.24 Extra for pre finished nosing to treads of steps of marble / granite stone. metre 40.00 719.90 28796

Extra for marble / granite stone flooring in treads of steps and risers using single

length up to 2.00 metre.

TOTAL (Carried Over to Summary of Civil Works) 15656411.05 0

12.0 ROOFING

Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch

of corrugation as approved by Engineer-in-Charge) of total coated thickness 0.50

mm (base metal of minimum 0.45 mm thickness with total coating thickness of

0.05mm) with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel

grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-

18 microns. Sheet should

12.50 have protective guard film of 25 microns minimum to avoid scratches during Sqm 260.00 738.65 192049

transportation and should be supplied in single length upto 12 metre or as desired

by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping

screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/

vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and

including cutting to

size and shape wherever required

Digitally signed by Om Prakash

Date: 2025.07.18 21:56:26 IST

Providing and fixing precoated galvanised steel sheet roofing accessories of total

coated thickness 0.50 mm (base metal of minimum 0.45 mm thickness with total

12.51 coating thickness of 0.05 mm) with Zinc coating 120gram per sqm as per IS: 277, in 0

240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and

polyester top coat 15-18 microns using self drilling/ self tapping screws complete :

12.51.1 Ridges plain (500 - 600mm) metre 130.00 532.35 69205.5

12.51.6 Gutter (600 mm over all girth) metre 130.00 1313.70 170781

Providing gola 75x75 mm in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4

12.21 stone aggregate 10 mm and down gauge), including finishing with cement mortar 0

1:3 (1 cement : 3 fine sand) as per standard design :

12.21.1 In 75x75 mm deep chase metre 14.00 305.15 4272.1

Making khurras 45x45 cm with average minimum thickness of 5 cm cement

concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate of 20 mm

12.22 nominal size) over P.V.C. sheet 1 m x1 m x 400 micron, finished with 12 mm Each 1.00 298.25 298.25

cement plaster 1:3 (1 cement : 3 coarse sand) and a coat of neat cement, rounding

the edges and making and finishing the outlet complete.

Providing and fixing false ceiling at all height including providing and fixing of frame

work made of special sections, power pressed from M.S. sheets and galvanized

with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and

consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm

and 37 mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash

fastener 12.5 mm dia x 50 mm long with 6 mm dia bolts, other flange of cleat fixed

to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of

required size and other end of angle hanger fixed with intermediate G.I. channels

45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the

ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm

each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a

12.45 direction perpendicular to G.I. intermediate channel with connecting clips made out 0

of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter

channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the

perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm

centre, with 25mm long dry wall screws @ 230 mm interval, including fixing of

gypsum board to ceiling section and perimeter channel with the help of dry wall

screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and finishing to a flush

finish of tapered and square edges of the board with recommended jointing

compound , jointing tapes , finishing with jointing compound in 3 layers covering

upto 150 mm on both sides of joint and two coats of primer suitable for board, all as

per manufacturer's specification and also including the cost of making openings for

light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably

12.45.3 12.5 mm thick tapered edge gypsum moisture resistant board. Sqm 2938.68 1529.10 4493532.55

TOTAL (Carried Over to Summary of Civil Works) 4930138.4 0

13.0 FINISHING WORK

Digitally signed by Om Prakash

Date: 2025.07.18 21:56:26 IST

13.4 12 mm cement plaster of mix :

13.4.2 1:6 (1 cement: 6 coarse sand) Sqm 15289.42 343.65 5254208.7

13.5 15 mm cement plaster on rough side of single or half brick wall of mix : 0

13.5.2 1:6 (1 cement: 6 coarse sand) Sqm 12800.62 395.35 5060724.57

13.6 20 mm cement plaster of mix : 0

13.6.1 1:4 (1 cement: 4 coarse sand) Sqm 15491.84 487.40 7550720.96

13.16 6 mm cement plaster of mix : 0

13.16.1 1:3 (1 cement: 3 fine sand) Sqm 7774.44 300.45 2335831.76

Extra for plastering exterior walls of height more than 10 m from ground level for

every additional height of 3 m or part thereof.

Providing and applying plaster of paris putty of 2 mm thickness over plastered

surface to prepare the surface even and smooth complete.

Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of

required shade: 0

New work (Two or more coats applied @ 1.43 ltr/10 sqm

13.47.1 over and including priming coat of exterior primer applied Sqm 19010.36 171.10 3252671.74

@ 2.20 kg/10 sqm)

13.50 Applying priming coat : 0

With ready mixed red oxide zinc chromate primer of

13.50.3 approved brand and manufacture on steel galvanised iron Sqm 140.00 67.40 9436

steel works

Painting with synthetic enamel paint of approved brand and

manufacture of required colour to give an even shade : 0

Two or more coats on new work over an under coat of

suitable shade with ordinary paint of approved brand and manufacture

Providing and applying white cement based putty of average thickness 1 mm, of

13.80 approved brand and manufacturer, over the plastered wall surface to prepare the Sqm 1467.01 156.05 228927.16

surface even and smooth complete.

Distempering with 1st quality acrylic distemper, having VOC (Volatile Organic

Compound ) content less than 50 grams/ litre, of approved brand and manufacture,

13.41 including applying additional coats wherever required, to achieve even shade and 0

colour.

New work (two or more coats) over and including water

13.41.1 thinnable priming coat with cement primer having VOC content less than 50 gram / Sqm 43646.51 185.65 8102974.53

Applying priming coats with primer of approved brand and

manufacture, having low VOC (Volatile Organic Compound ) content. 0

With ready mixed pink or grey primer on wood work (hard and soft wood) having

VOC content less than 50 grams/ litre

Add for plaster drip course/ groove in plastered surface or moulding to R.C.C.

projections.

metre 42.00 78.40 3292.8

Digitally signed by Om Prakash

Date: 2025.07.18 21:56:26 IST

TOTAL (Carried Over to Summary of Civil Works) 33833288.25 0

21 ALUMINIUM WORK

Providing and fixing aluminium work for doors, windows, ventilators and partitions

with extruded built up standard tubular sections/appropriate Z sections and other

sections of approved make conforming to IS: 733 and IS : 1285, fixed with rawl

plugs and screws or with fixing clips, or with expansion hold fasteners including

necessary filling up of gaps at junctions, at top, bottom and sides with required

21.1 PVC/neoprene felt etc. Aluminium sections shall be smooth, rust free, straight, 0

mitred and jointed echanically wherever required including cleat angle, Aluminium

snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete

as per architectural drawings and the directions of Engineer-in-charge. Glazing and

paneling to be paid for separately) :

21.1.1 For fixed portion. 0

21.1.1.2 Powder coated aluminium (minimum thickness of powder coating 50 micron) kg 688.50 530.90 365524.65

For shutters of doors, windows & ventilators including providing and fixing hinges/

pivots and making provision for fixing of fittings wherever required including the cost

21.1.2 of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately) 0

21.1.2.2 Powder coated aluminium (minimum thickness of powder coating 50 micron) kg 826.20 634.45 524182.59

Providing and fixing glazing in aluminium door, window, ventilator shutters and

partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the

21.3 architectural drawings and the directions of engineer-in-charge . (Cost of aluminium 0

snap beading shall be paid in basic item):

21.3.2 With float glass panes of 5 mm thickness (weight not less than 12.50 kg/sqm) Sqm 75.06 1505.25 112984.07

Filling the gap in between aluminium frame and adjacent RCC/Brickwork/ Stone

21.8 Work by providing weather silicon sealant over backer rod of approved quality as 0

per architectural drawings and direction of Engineer-in-charge

21.8.1 Upto 5mm depth and 5mm width metre 275.40 96.75 26644.95

TOTAL (Carried Over to Summary of Civil Works) 1029336.26 0

22.0 WATER PROOFING

Providing and laying water proofing treatment in sunken portion of WCs, bathroom

22.5 etc., by applying cement slurry mixed with water proofing cement compound

consisting of applying :

Digitally signed by Om Prakash

Date: 2025.07.18 21:56:26 IST

(a) First layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement

compound @ 0.253 kg/ sqm. This layer will be allowed to air cure for 4 hours.

(b) Second layer of slurry of cement @ 0.242 kg/sqm mixed with water proofing

cement compound @ 0.126 kg/sqm. This layer will be allowed to air cure for 4 hours

followed with water curing for 48 hours. The rate includes preparation of surface, Sqm 895.99 617.05 552872.31

treatment and sealing of all joints, corners, junctions of pipes and masonry with

polymer mixed slurry.

Providing and applying integral crystalline slurry of hydrophilic in nature for

waterproofing treatment to the RCC structures like retaining walls of the basement,

water tanks, roof slabs, podiums, reservior, sewage & water treatment plant, tunnels

/ subway and bridge deck etc., prepared by mixing in the ratio of 5 : 2 (5 parts

integral crystalline slurry : 2 parts water) for vertical surfaces and 3 : 1 (3 parts

integral crystalline slurry : 1 part water) for horizontal surfaces and applying the

same from negative (internal) side with the help of synthetic fiber brush. The

22.23 material shall meet the requirements as specified in ACI- 212-3R-2010 i.e by 0

reducing permeability of concrete by more than 90% compared with control

concrete as per DIN 1048 and resistant to 16 bar hydrostatic pressure on negative

side. The crystalline slurry shall be capable of self-healing of cracks up to a width of

0.50mm. The work shall be carried out all complete as per specification and the

direction of the engineer-in-charge. The product performance shall carry guarantee

for 10 years against any leakage.

22.23.1 For vertical surface two coats @ 0.70 kg per sqm Sqm 288.10 472.90 136243.44

22.23.2 For horizontal surface one coat @1.10 kg per sqm. Sqm 222.63 362.80 80770.16

Providing and applying of swellable type water stop tape, 19mm x 25mm thick in

linear meter (expansive nature) for construction joints treatment of RCC structure

such as raft slab, retaining walls, water storage tank and at the junctions of raft slab

with the retaining walls etc.. After cleaning the surface, one coat of required primer

22.26 for swellable water stop tape shall be applied throughout the length of the joint meter 74.00 573.45 42435.3

@3.78 litre per 240 running meter. Over the primed surface swellable type water

stop tape shall be placed. The work shall be carried out all complete as per

specification and the direction of the Engineer-In-Charge. The product performance

shall carry guarantee for 10 years against any leakage.

Digitally signed by Om Prakash

Date: 2025.07.18 21:56:26 IST

Providing and laying APP (Atactic Polypropylene Polymer) modified prefabricated

five layer 3 mm thick water proofing membrane, black finished reinforced with non-

woven polyester matt consisting of a coat of bitumen primer for bitumen membrane

@ 0.40 litre/sqm by the same membrane manufacture of density at 25°C, 0.87-0.89

kg/ litre and viscocity 70-160 cps. Over the primer coat the layer of membrane shall

be laid using Butane Torch and sealing all joints etc, and preparing the surface

14.91.1 complete. The vital physical and chemical parameters of the membrane shall be as Sqm 168.00 560.95 94239.6

under : Joint strength in longitudinal and transverse direction at 23°C as 650/

450N/5cm. Tear strength in longitudinal and transverse direction as 300/250N.

Softening point of membrane not less than 150°C. Cold flexibility shall be upto -2°C

when tested in accordance with ASTM, D - 5147. The laying of membrane shall be

got done through the authorised applicator of the manufacturer of membrane : 3

mm thick

Extra for covering top of membrane with Geotextile, 120 gsm non woven, 100%

polyester of thickness 1 to 1.25 mm bonded to the membrane with intermittent touch

14.92 by heating the membrane by Butane Torch as per manufactures recommendation. Sqm 168.00 88.90 14935.2

TOTAL (Carried Over to Summary of Civil Works) 921496.01 0

16.0 ROAD WORKS

Preparation and consolidation of sub grade with power road roller of 8 to 12 tonne

capacity after excavating earth to an average of 22.5 cm depth, dressing to camber

16.1 and consolidating with road roller including making good the undulations etc. and re- Sqm 2907.99 218.90 636559.01

rolling the sub grade and disposal of surplus earthwith lead upto 50 metres

Extra for compaction of earth work in embankment under optimum moisture

conditions to give at least 95% of the maximum dry density (proctor density).

16.3 Supplying and stacking at site. 0

16.3.9 Good earth Cum 180.00 775.50 139590

PRIME COAT 0

Surface dressing one coat on new surface with bitumen of specified grade at a rate

of 1.95 kg/sqm of surface area with 1.5 cum of stone chippings 13.2 mm nominal

16.28 size per 100 sqm of road surface, including consolidation with road roller of 6 to 8 0

tonne capacity , etc. complete :

Using bitumen emulsion (minimum 50% bitumen content RS grade conforming to

TACK COAT 0

Providing and applying tack coat using bitumen emulsion conforming to IS:8887,

16.31 using emulsion pressure distributer including preparing the surface & cleaning with 0

mechanical broom.

16.31.2 With medium setting bitumen emulsion 0

16.31.2.1 On W.B.M / W.M.M. @ 0.4kg/sqm Sqm 2303.00 21.20 48823.6

Digitally signed by Om Prakash

Date: 2025.07.18 21:56:26 IST

16.31.2.2 On bituminous surface @ 0.25kg/sqm Sqm 2303.00 14.05 32357.15

PREMIX CARPETING 0

Providing and laying Bitumen Penetration Macadam with hard stone aggregate of

quality, size and grading as specified, with bitumen of suitable penetration grade,

including required key aggregate as specified, spreading coarse aggregate with the

help of self propelled/ tipper tail mounted aggregate spreader and applying bitumen

16.36 by a pressure distributor and then spreading key aggregate with the help of 0

aggregate spreader complete, including consolidation with road roller of minimum 8

to 10 tonne capacity to achieve specified values of compaction and surface

accuracy :

For 50mm compacted thickness using coarse aggregate of size 50-20 mm graded

16.36.1 @ 0.60 cum per 10 sqm key aggregate of size 12.5 mm graded @ 0.15 cum per 10 Sqm 2303.00 505.65 1164511.95

sqm. With paving asphalt grade VG - 10 @ 50 kg/ 10 sqm.

SEAL COAT 0

Providing and laying seal coat over prepared surface of road with bitumen heated in

bitumen boiler fitted with the spray set spraying using 98 kg of bitumen of grade VG -

16.41 10 and blinding surface with 0.90 cum of stone aggregate of 6.7 mm size (Passing Sqm 2303.00 130.85 301347.55

11.2 mm sieve and retained on 2.36 mm sieve) per 100 sqm of road surface,

including rolling and finishing with power road roller all complete.

Providing and applying 2.5 mm thick road marking strips (retro- reflective) of

specified shade/ colour using hot thermoplastic material by fully/ semi automatic

thermoplastic paint applicator machine fitted with profile shoe, glass beads

16.62 dispenser, propane tank heater and profile shoe heater, driven by experienced Sqm 230.30 747.80 172218.34

operator on road surface including cost of material, labour, T&P, cleaning the road

surface of all dirt, seals, oil, grease and foreign material etc. complete as per

direction of Engineer-in-charge and accordance with applicable specifications.

16.72 Supplying and stacking of hard stone (for stone pitching) 22.5 cm thick at site. CUM 125.00 995.85 124481.25

Providing and laying C.C. pavement of mix M-25 with ready mixed concrete from

batching plant. The ready mixed concrete shall be laid and finished with screed

board vibrator , vacuum dewatering process and finally finished by floating,

16.75 brooming with wire brush etc. complete as per specifications Cum 26.25 9823.80 257874.75

and directions of Engineer-in-charge. (The panel shuttering work shall be paid for

separately). (Note:- Cement content considered in this item is @ 330 kg/cum.

Excess/less cement used as per design mix is payable/ recoverable separately).

Construction of granular sub-base by providing close graded Material conforming to

specifications, mixing in a mechanical mix plant at OMC, carriage of mixed material

by tippers to work site, for all leads & lifts, spreading in uniform layers of specified

16.78 thickness with motor grader on prepared surface and compacting with vibratory 0

power roller to achieve the

desired density, complete as per specifications and directions of Engineer in-

Charge.

With material conforming to Grade-II (size range 53 mm to

0.075 mm ) having CBR Value-25

Digitally signed by Om Prakash

Date: 2025.07.18 21:56:26 IST

Providing, laying, spreading and compacting graded stone aggregate (size range 53

mm to 0.075 mm ) to wet mix macadam (WMM) specification including premixing

the material with water at OMC in for all leads & lifts, laying in uniform layers with

16.79 mechanical paver finisher in sub- base / base course on well prepared surface and Cum 345.45 2914.30 1006744.94

compacting with vibratory roller of 8 to 10 tonne capacity to achievethe desired

density, complete as per specifications and directions of Engineer-in-Charge.

Providing and laying 60 mm thick faciory made cement concrete interlocking paver

block of M -30 grade made by block making machine with strong vibratory

16.68 compaction, of approved size, design & shape, laid in required colour and pattern Sqm 503.92 972.00 489808.36

over and including 50 mm thick compacted bed of coarse sand, filling the joints with

line sand etc. all complete as per the direction of Engineer-in-charge.

Providing and laying at or near ground level factory made kerb stone of M-25 grade

cement concrete in position to the required line, level and curvature, jointed with

cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without

grooves (thickness of joints except at sharp curve shall not to more than 5 mm),

16.69 including making drainage opening wherever required complete etc. as per direction Cum 75.95 10117.60 768441.84

of Engineer in-charge (length of finished kerb edging shall be measured to

calculate volume for payment). (Precast C.C. kerb stone shall be approved by

Engineer-in-charge).

Painting runway/taxi track/apron marking with adequate nos of coats to give uniform

finish with road marking paint of superior make as approved by the Engineer-in-

16.47.1 charge, including cleaning the surface of ail dirt, scales, oil, grease and other 0

foreign material etc. and lining out complete.

16.47.1 New work (two or more coats) Sqm 506.34 188.20 95293.19

TOTAL (Carried Over to Summary of Civil Works) 6987156.76 0

15.0 DISMANTLING AND DEMOLISHING WORK

15.2 Demolishing cement concrete including disposal of material within 50 metre lead:

15.2.2 Nominal concrete 1:4:8 or leaner mix (i/c equivalent design mix) Cum 15.00 1503.60 22554

Demolishing R.C.C. work manually/ by mechanical means including stacking of

15.3 steel bars and disposal of unserviceable material within 50 metres lead as per Cum 50.00 3551.25 177562.5

direction of Engineer - in- charge.

Extra for cutting reinforcement bars in R.C.C. or R.B. work (Payment shall be made

on the cross sectional area of R.C.C. or R.B. work)

Extra for scrapping, cleaning and straightening reinforcement from R.C.C. or R.B.

Dismolishing brick work manually / by mechanical means including stacking of

15.7 sericeable material and disposal of unserviceable material within 50 metre lead as 0

per direction of engineer- in- charge.

15.7.4 In cement mortar Cum 100.00 2060.20 206020

Digitally signed by Om Prakash

Date: 2025.07.18 21:56:26 IST

Removing mortar form bricks and cleaning bricks including stacking within a lead of

50m (stacks of cleaned bricks shall be measured): 0

15.8.3 From brick work in cement mortar 1000 Nos 49.40 6700.80 331019.52

Dismantling doors, windows and clerestory windows (steel or wood) shutter

15.12 including chowkhats, architrave, holdfasts etc. complete and stacking within 50 0

metres lead :

15.12.1 Of area 3 sq. metres and below each 10.00 367.20 3672

15.12.2 Of area beyond 3 sqm each 10.00 502.75 5027.5

Taking out doors, windows and clerestory window shutters (steel or wood) including

stacking within 50 metres lead : 0

15.13.1 Of area 3 sq. metres and below each 10.00 143.50 1435

15.13.2 Of area beyond 3 sqm each 10.00 188.90 1889

Dismantaling tile work in floor and roof laid in cement mortar including stacking

material within 50 metre lead . 0

15.23.1 For thickness of tiles 10mm to 25mm. Sqm 150.00 73.40 11010

Dismantling stone slab flooring laid in cement mortar including stacking of

serviceable material and disposal of unserviceable material within 50 metre lead:

Demolishing brick tile covering in terracing including stacking of serviceable material

and disposal of unserviceable material within 50 metres lead.

Dismantling G.I. pipes (external work) including excavation and refilling trenches

15.44 after taking out the pipes, manually/ by mechanical means including stacking of 0

pipes within 50 metres lead as per direction of Engineer-in-charge :

15.44.1 15 mm to 40 mm nominal bore meter 350.00 149.80 52430

Dismantling of flushing cistern of all types (C.I./PVC/Vitreous China) including

15.52 stacking of useful materials near the site and disposal of unserviceable materials each 20.00 112.05 2241

within 50 metres lead.

Dismantling old plaster or skirting raking out joints and cleaning the surface for

plaster including disposal of rubbish to the dumping ground within 50 metres lead.

Dismantling aluminium/ Gypsum partitions, doors, windows, fixed glazing and false

15.57 ceiling including disposal of unserviceable material and stacking of serviceable Sqm 50.00 56.35 2817.5

material with in 50 meters lead as directed by Engineer-in-charge.

Disposal of building rubbish / malba / similar unserviceable, dismantled or waste

materials by mechanical means, including loading, transporting, unloading to

15.60 approved municipal dumping ground or as approved by Engineer- in-charge, Cum 207.50 263.95 54769.63

beyond 50 m initial lead, for all leads including all lifts involved.

TOTAL (Carried Over to Summary of Civil Works) 1159605.15 0

Horti.(2020) HORTICULTURE AND LAND SCAPING

Supplying and stacking at site dump manure from approved source, including

2.4 carriage upto 5 km complete (manure measured in stacks will be reduced by 8% for

payment) :

Digitally signed by Om Prakash

Date: 2025.07.18 21:56:26 IST

2.4.2 Screened through sieve of I.S. designation 16 mm Cum 20.00 290.70 5814

2.4.3 Screened through sieve of I.S. designation 4.75 mm Cum 20.00 319.90 6398

2.7 Fine dressing of the ground. Sqm 400.00 3.70 1480

Mixing earth and sludge or manure in the required proportion specified or directed

by the Officer-in-charge

for 60 days or more till the grass forms a thick lawn, free from weeds and fit for

2.10 mowing including supplying good earth, if needed (the grass and earth shall be paid 0

for separately).

2.10.2 With grass Turf Sqm 400.00 13.30 5320

Digging holes in ordinary soil and refilling the same with the excavated earth mixed

with manure or sludge in the ratio of 2:1 by volume (2 parts of stacked volume of

earth after reduction by 20% : 1 part of stacked volume of manure after reduction by

2.14 8%) flooding with water, dressing including removal of rubbish and surplus earth, if 0

any, with all leads and lifts (cost of manure, sludge or extra good earth if needed to

be paid for separately) :

2.14.4 Holes 45 cm dia, and 45 cm deep. Each 50.00 18.70 935

Providing and fixing M. S. tree guard 45 cm square in plan, height 1.20 metre above

ground level and 0.40 metre below ground level. The vertical members shall consist

of four nos. angle iron of size 25x25x3 mm, 1.6 m long, one at each corner and 8

nos flat iron of size 25x3 mm, 1.2 m long. The vertical members shall be welded to 4

nos. 25x6 mm M. S. flats placed horizontally around the vertical member of the

cage. One name plate of 1 mm thick M.S. sheet of size 250x100 mm shall be

2.26 welded to the tree guard near the middle height and lettered CPWD/ PWD/ any Each 50.00 2219.25 110962.5

other approved name. The tree guard shall be fixed to the ground by making

suitable holes and by embedding four corners leg in the ground, including refilling

the earth, compaction etc. complete. The tree guard shall be painted with two or

more coats of synthetic enamel paint of approved brand and manufacture over a

coat of primer, complete in all respect.

thickness of existing ground prepared with proper level and ramming with required

2.34 tools wooden and than rolling the surface with light roller make the surface Per Sqm 400.00 87.50 35000

smoothen and light watering the same maintenance for 30 days or more till the

grass establish properly,as per direction of officer in charge

Complete maintenance of the entire garden features having as per yard stick in the

garden area i.e. lawn trees, shrubs, hedge, flower beds, foliages, creepers etc.

including hoeing,weeding pruning replacement of plants, gap filling, watering,

mowing of lawn, grass cutting by lawn mover and brush cutter , removal of garden

2.40 waste, applying insecticide, pesticide & fertilizers(whenever required) top dressing

of lawn with good earth and menure and maintenance of other garden related works

as directed by office-in-charge (Cost of Good Earth, Manure, Fertilizer, Insecticide ,

Pesticide will be provided by the Department & lawn mover and brush cutter with

fuel , other T & P material/articles shall be provided by the contractor.)

Digitally signed by Om Prakash

Date: 2025.07.18 21:56:26 IST

Per Sq.Mt. Per

2.40.5 Play grounds / Public parks (as per yard stick 1Mali =2.00Acre).

TOTAL (Carried Over to Summary of Horticultural Work) 174910.5 0

SANITARY FIXTURES & FITTINGS

Providing and fixing water closet squatting pan (Indian type W.C. pan

) with 100 mm sand cast Iron P or S trap, 10 litre low level white

P.V.C. flushing cistern, including flush pipe, with manually controlled

17.1 device (handle lever) conforming to IS : 7231, with all fittings and

fixtures complete, including cutting and making good the walls and

floors wherever required:

White Vitreous china Orissa pattern W.C. pan of size 580x440 mm

with integral type foot rests

Providing and fixing white vitreous china pedestal type water closet

(European type W.C. pan) with seat and lid, 10 litre low level white

P.V.C. flushing cistern, including flush pipe, with manually controlled

17.2 device (handle lever), conforming to IS : 7231, with all fittings and

fixtures complete, including cutting and making good the walls and

floors wherever required :

17.2.1 W.C. pan with ISI marked white solid plastic seat and lid Each 24 6515.55 156373.2

Providing and fixing wash basin with C.I. brackets, 15 mm dia CP

Brass single hole basin mixer of approved quality and make,

including painting of fittings and brackets, cutting and making good

the walls wherever required:-

a) White Vitreous China Wash basin size 630x450 mm with a 15 mm

CP Brass single hole basin mixer

Providing and fixing kitchen sink with C.I. brackets, C.P. brass chain

with rubber plug, 40 mm C.P. brass waste complete, including

17.9 painting the fittings and brackets, cutting and making good the walls

wherever required:

17.9.1 White glazed fire clay kitchen sink of size 600x450x 250 mm Each 202 3892.75 786335.5

Digitally signed by Om Prakash

Date: 2025.07.18 21:56:26 IST

Supply, Receiving, Storing & Fixing of CP brass wall mounted sink

mixer with C.P. wall flange, swinging spout complete as required with

MRP-1 Each 202 5215 1053430

flow rate of 6.0 LPM complying to Green Building requirements.

Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1

metre long with S.S. triangular plate to Eureopean type W.C. of

17.16A Each 24 349.15 8379.6

quality and make as approved by Engineer - in - charge.

Providing and fixing CP Brass 32mm size bottle trap of approved

17.22A Each 226 1034.8 233864.8

quality & make and as per the direction of engineer in charge.

Providing and fixing C.P. brass long nose bib cock of approved

18.50 quality conforming to IS standards and weighing not less than 810

18.50.1 15 mm nominal bore Each 210 820.7 172347

Supply, Receiving, Storing & Fixing of C.P. brass twin coat hook

MRP-2 with PVC rawl plug & C.P. brass screw complete as required. Make : Each 226 756 170856

Providing and fixing C.P. brass angle valve for basin mixer and

18.53 geyser points of approved quality conforming to IS:8931.

18.53.1 15mm nominal bore Each 1260 574.3 723618

Providing and fixing unplasticised P.V.C. connection pipe with PTMT

18.74 Nuts, collar and bush of approved quality and colour.

18.74.2 15 mm nominal bore with 45 cm length Each 1260 121.9 153594

Providing and fixing Chromium Plated towel ring Rectangular shape

with concealed fittings arrangement of approved quality and colour,

MRP-3 Each 226 1649 372674

of approved brand & manufacture complete as per direction of

Engineer in Charge.

Digitally signed by Om Prakash

Date: 2025.07.18 21:56:26 IST

Providing and fixing of C. P. brass towel rail 600 x 20 mm size

MRP-4 Each 218 1479 322422

complete with C.P. brass brackets.

Providing and fixing Cp bras liquid soap container 109 mm wide,

125 mm high and 112 mm distance from wall of standard shape with

MRP-5 Each 226 1798 406348

bracket of the same materials with snap fittings of approved quality

and colour, weighing not less than 105 gms.

Providing and fixing 600x450 mm beveled edge mirror of superior

glass (of approved quality) complete with 6 mm thick hard board

ground fixed to wooden cleats with C.P. brass screws and washers

complete.

Providing and fixing P.V.C. waste pipe for sink or wash basin

including P.V.C. waste fittings complete.

17.28.2 Flexible pipe

17.28.2.2 40 mm dia Each 202 119.55 24149.1

Providing and fixing C.P. brass long body bib cock of approved

18.51 quality conforming to IS standards and weighing not less than 690

18.51.1 15 mm nominal bore Each 396 798.95 316384.2

Providing and fixing of recessed type soap tray complete, including

MRP-6 Each 218 1095.00 238710

cutting and making good the walls where required.

Providing and Fixing Electric Hot Water Geyser of Stainless Steel

Material Grade 316 with Inlet and Outlet Connection with 15 mm dia

Angle Valve and Geyser (25 LTR)shall be equipped with inbuilt non

MRP-7 return valve and insulation on inner and outer surfaces for prevention

of heat losses 2 nos CP round wall flange and CP Brass Screws and

Rawl plugs all other required accessories Complete in all respect as

per direction of Engineer - in - charge .

MRP-7 (a) Electric Geyser 15 Litre Capacity Each 202 10213 2063026

MRP-7 (b) Electric Geyser 25 Litre Capacity Each 218 11659 2541662

Digitally signed by Om Prakash

Date: 2025.07.18 21:56:26 IST

TOTAL CARRIED OVER TO SUMMARY 5308819.6 7169128

INTERNAL & EXTERNAL WATER SUPPLY

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes,

having thermal stability for hot & cold water supply, including all

CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at

18.8 1.00 m spacing. This includes jointing of pipes & fittings with one step

CPVC solvent cement and the cost of cutting chases and making

good the same including testing of joints complete as per direction of

Engineer in Charge.

Concealed work, including cutting chases and making good the walls

18.8.1 15mm nominal bore Metre 7077.1 497.8 3522980.38

18.8.2 20mm nominal bore Metre 3456.1 537.6 1857999.36

18.8.3 25mm nominal bore Metre 513.975 627.25 322390.82

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes,

having thermal stability for hot & cold water supply, including all

CPVC plain & brass threaded fittings, including fixing the pipe with

18.7 clamps at 1.00 m spacing. This includes jointing of pipes & fittings

with one step CPVC solvent cement and testing of joints complete as

per direction of Engineer in Charge.

Internal work - Exposed on wall

18.7.2 20mm nominal bore Mtr. 132.25 335 44303.75

18.7.3 25mm nominal bore Mtr. 1477.5 401.55 593290.13

18.7.4 32 mm nominal bore Mtr. 516.8 518.75 268090

18.7.5 40mm nominal bore Mtr. 75.4 702.95 53002.43

18.7.6 50mm nominal bore Mtr. 155.25 934.15 145026.79

Providing and fixing gun metal gate valve with C.I. wheel of

approved quality (screwed end) :

18.17.4 50mm nominal bore Each 15 1026.65 15399.75

18.17.5 65mm nominal bore Each 13 1742.15 22647.95

18.17.6 80mm nominal bore Each 9 2604.55 23440.95

Digitally signed by Om Prakash

Date: 2025.07.18 21:56:26 IST

Providing and fixing ball valve (brass) of approved quality, High or low

pressure, with plastic floats complete :

18.18.2 20 mm nominal bore Each 194 462.5 89725

18.18.3 25 mm nominal bore Each 223 464.05 103483.15

MRP-8 32 mm nominal bore Each 24 2275 54600

MRP-9 40 mm nominal bore Each 16 2468 39488

Supplying, fixing, testing and commissioning of butterfly valve of PN

DSR E&M-

1.6 rating with bronze/gunmetal seat duly ISI marked complete with

nuts, bolts, washers, gaskets conforming to IS 13095 of following

sizes as required

18.11.5 100 mm dia Set 5 6667 33335

Providing and fixing motorized valve with sensor of approved quality,

to complete the work.

40 mm dia ( Flushing Riser)

MRP-10 (a) Each 6 35846 215076

Providing and placing on terrace (at all floor levels) polyethylene

water storage tank, IS : 12701 marked, with cover and suitable

18.48 Per Litre 81000 11.00 891000

locking arrangement and making necessary holes for inlet, outlet and

overflow pipes but without fittings and the base support for tank.

TOTAL CARRIED OVER TO SUMMARY 7986115.46 309164

SOIL, WASTE, VENT PIPES, RAIN WATER PIPES & FITTINGS.

Providing and fixing soil, waste and vent pipes

Supplying, Installation, Testing and Commissioning of uPVC pipes

type -B conforming to IS 13592 (1992) for soil, waste and vent pipes

including all fittings rubber ring type (plain or with access door) e.g.

MRP-11 bends, junctions, cowls, offsets, access pieces, jointing with rubber

ring joints with lubricant etc. fixed with clamps to walls with cement

concrete 1:2:4 blocks complete in all respects. (For Soil & Waste

Digitally signed by Om Prakash

Date: 2025.07.18 21:56:26 IST

MRP-11 (a) Metre 448.8 424 190291.2

MRP-11 (b) Metre 2125.2 799 1698034.8

Providing, laying, Jointing, Testing and commissioning of uPVC

pressure pipes of 6Kg/Sqcm pressure rating class 5 (IS : 4985-

2000) including fittings, tees, bends, clamps, coupling and adaptors

supports, and jointing with solvent joint, testing and necessary earth

MRP-12 work in excavation, backfilling, disposal of surplus earth with a lead

upto 50m complete, compaction and consolidation Including laying

cement concrete 1:2:4 alround UPVC pipe including bed concrete and

thrust blocks at bends as per standard design (For Soil & Waste Pipe)

MRP-12 (a) 40 OD mm Metre 516.6 173 89371.8

MRP-12 (b) 50 OD mm Metre 347.85 233 81049.05

MRP-12 (c) 65 OD mm Metre 39.6 316 12513.6

Supplying, Installation, Testing and Commissioning of uPVC, P or S

trap of self cleansing design with / without vent. arm Setting in

cement concrete 1:2:4 mix complete including cost of cutting &

making good the Wall / Floors wherever required.

110 x110 mm outlet Each 620 730 452600

Providing and fixing floor drain with jali size 110X50 size inlet and

MRP-14 outlet including cutting and making good the walls and floors

wherever required complete in all respects.

110 x 50 mm outlet Each 58 594 34452

Providing and fixing 125 mm dia, 3 mm thick Stainless steel

MRP-15 grating with frame for floor traps or drains of required pattern

including cutting and making good the floors complete.

125mm dia. Each 644 809 520996

Digitally signed by Om Prakash

Date: 2025.07.18 21:56:26 IST

Providing and fixing cast brass Cleanout plug with suitable insert

keys for opening in brass cap, male threaded joint/reducer with G.I.

socket caulked to Pipe/fittings of CI pipe including cost of lead joints

etc. complete in all respect.

100mm dia. Each 22 750 16500

Providing and fixing on wall face unplasticised Rigid PVC rain water

pipes conforming to IS : 13592 Type A, including jointing with seal

ring conforming to IS : 5382, leaving 10 mm gap for thermal

expansion, (i) Single socketed pipes.

12.41.2 110 mm diameter Metre 234.6 377.4 88538.04

TOTAL CARRIED OVER TO SUMMARY 88538.04 3095808.45

EXTERNAL SEWERAGE AND STORM WATER DRAINAGE

Excavating trenches of required width for pipes, cables, etc including

excavation for sockets, and dressing of sides, ramming of bottoms,

depth upto 1.5 m, including getting out the excavated soil, and then

returning the soil as required, in layers not exceeding 20 cm in depth,

2.10.1 including consolidating each deposited layer by ramming, watering,

etc. and disposing of surplus excavated soil as directed, within a lead

All kinds of soil

Pipes, cables etc. exceeding 80 mm dia. but not exceeding 300 mm

2.10.1.2 Metre 1637.8 352.15 576751.27

Supplying and laying of following size DWC SN8 pipe ISI marked

along with all accessories like socket, bend, couplers etc. conforming

to IS 16098, Part II complete with fitting and cutting,jointing etc.direct

MRP-17 in ground (75 cm below ground level) including excavation and

refilling the trench but excluding sand cushioning and protective

covering etc., complete as required.

200 mm dia. pipe

MRP-17 (a) Metre 44 971 42724

250 mm dia. Pipe

MRP-17 (b) Metre 1307.8 974 1273797.2

Digitally signed by Om Prakash

Date: 2025.07.18 21:56:26 IST

300 mm dia. Pipe

MRP-17 (c) Metre 72.6 850 61710

450 mm dia. Pipe

MRP-17 (d) Metre 95.7 1021 97709.7

Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse

19.2 sand : 10 graded stone aggregate 40 mm nominal size) all-round

DWC pipes including bed concrete as per standard design :

19.2.4 250 mm dia. DWC & RCC Pipe Metre 1307.8 1590.55 2080121.29

MRP-18 450 mm dia. DWC & RCC Pipe Metre 95.7 2099 200874.3

Constructing brick masonry circular type manhole 0.91 m internal dia

at bottom and 0.56m dia at top in cement mortar 1:4 (1 cement : 4

coarse sand), inside cement plaster 12 mm thick with cement mortar

1:3 (1 cement : 3 coarse sand) finished with a floating coat of neat

19.9 cement, foundation concrete 1:3:6 mix (1 cement : 3 coarse sand : 6

graded stone aggregate 40 mm nominal size), and making necessary

channel in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4

graded stone aggregate 20 mm nominal size) finished with a floating

coat of neat cement, all complete as per standard design:

0.91 m deep with S.F.R.C. cover and frame (heavy duty, HD-20 grade

designation) 560 mm internal diameter conforming to I.S. 12592, total

weight of cover and frame to be not less than 182 kg., fixed in cement

19.9.1 concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate

20 mm nominal size) including centering, shuttering all complete.

(Excavation, foot rests and 12mm thick cement plaster at the external

surface shall be paid for separately):

With common burnt clay F.P.S. (non modular) bricks of class

designation 7.5 Each 12,725.00

Extra depth for circular type manhole 0.91m internal dia (at bottom)

beyond 0.91 m to 1.67 m

With common burnt clay F.P.S. (non modular) bricks of class

designation 7.5 Metre 7,591.80

Digitally signed by Om Prakash

Date: 2025.07.18 21:56:26 IST

Providing and fixing square-mouth S.W. gully trap class SP-1

complete with C.I. grating brick masonry chamber with water tight C.I.

19.4 cover with frame of 300 x300 mm size (inside) the weight of cover to

be not less than 4.50 kg and frame to be not less than 2.70 kg as per

standard design :

19.4.2 150 x 100mm size P-type

With common burnt clay F.P.S. (non modular) bricks of class

designation 7.5

Constructing brick masonry road gully chamber 50x45x60cm with

bricks in cement mortar 1:4 (1 cement : 4 coarse sand) including

500x450mm precast RCC horizontal grating with frame complete as

per standard design.

With common burnt clay F.P.S. (non modular) bricks of class

designation 7.5

Providing orange colour safety foot rest of minimum 6 mm thick

plastic encapsulated as per IS : 10910 on 12mm dia steel bar

conforming to IS : 1786 having minimum cross section as 23

mmx25mm and over all minimum length 263 mm and width as

165mm with minimum 112 mm space between protruded legs having

2 mm tread on top surface by ribbing or chequering besides

19.16 necessary and adequate anchoring projections on tail length on 138 Each 110 553.7 60907

mm as per standard drawing and suitable to with stand the bend test

and chemical resistance test as per specifications and having

manufacture's permanent identification mark to be visible even after

fixing, including fixing in manholes with 30x20x15 cm cement

concrete block 1:3:6 (1 cement : 3 coarse sand : 6 graded stone

aggregate 20 mm nominal size) complete as per design.

Making connection of drain or sewer line with existing manhole

including breaking into and making good the walls, floors with cement

concrete 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone

19.21 aggregate 20 mm nominal size) cement plastered on both sides with

cement mortar 1:3 (1 cement : 3 coarse sand), finished with a floating

coat of neat cement and making necessary channels for the drain etc.

complete :

19.21.3 For pipes 350 to 450 mm diameter Each 3 1328.45 3985.35

Digitally signed by Om Prakash

Date: 2025.07.18 21:56:26 IST

TOTAL CARRIED TO SUMMARY 4134377.91 1676815.2

EXTERNAL WATER SUPPLY

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes,

having thermal stability for hot & cold water supply including all CPVC

18.9 plain & brass threaded fittings This includes jointing of pipes & fittings

with one step CPVC solvent cement, trenching, refilling & testing of

joints complete as per direction of Engineer in Charge.

18.9.4 32 mm nominal dia Pipe Metre 541 438.60 237282.6

18.9.5 40 mm nominal dia Pipe Metre 220.8 563.05 124321.44

18.9.6 50 mm nominal dia Pipe Metre 195.5 794.25 155275.88

18.9.7 65 mm nominal dia Pipe Metre 224.25 1674.40 375484.2

18.9.8 80 mm nominal dia Pipe Metre 28.75 2166.35 62282.56

Providing and fixing enclosed type water meter (bulk type)

conforming to IS : 2373 and tested by Municipal Board complete with

bolts, nuts, rubber insertions etc. (The tail pieces if required will be

paid separately) :

18.60..1 100 mm dia nominal bore Each 3 3627.65 10882.95

Constructing masonry Chamber 30x30x50 cm inside, in brick work

in cement mortar 1:4 (1 cement :4 coarse sand) for stop cock, with

C. I. surface box 100x100 x75 mm (inside) with hinged cover fixed in

cement concrete slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded

18.32 stone aggregate 20 mm nominal size), i/c necessary excavation, 0

foundation concrete 1:5:10 ( 1 cement : 5 fine sand : 10 graded stone

aggregate 40mm nominal size ) and inside plastering with cement

mortar 1:3 (1 cement : 3 coarse sand) 12mm thick, finished with a

floating coat of neat cement complete as per standard design :

With common burnt clay F.P.S.(non modular) bricks of

class designation 7.5

Digitally signed by Om Prakash

Date: 2025.07.18 21:56:26 IST

Constructing masonry Chamber 60x45x50 cm inside, in brick work

in cement mortar 1:4 (1 cement : 4 coarse sand) for water meter

complete with C.I. double flap surface box 400x200x200 mm (inside)

with locking arrangement and RCC top slab 1:2:4 mix (1 cement : 2

coarse sand : 4 graded stone aggregate 20 mm nominal size) , i/c

18.37 necessary excavation, foundation concrete 1:5:10 ( 1 cement : 5 fine 0

sand:10 graded stone aggregate 40 mm nominal size) and inside

plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm

thick, finished with a floating coat of neat cement complete as

per standard design :

With common burnt clay F.P.S.(non modular) bricks of

class designation 7.5

TOTAL CARRIED TO SUMMARY 1048425.48 0

SUB HEAD - I - (DOWN COMER SYSTEM - PUMPING

EQUIPMENTS)

Digitally signed by Om Prakash

Date: 2025.07.18 21:56:26 IST

Supplying, installation, testing and commissioning of electric

driven terrace pump suitable for automatic operation and

consisting of following, complete in all respects, as required:

(Terrace Pump)

(a) Horizontal type, multistage, centrifugal, split casing

pump of cast iron body & bronze impeller with stainless

steel shaft, mechanical confirming to IS : 1520

b) Suitable HP squirell cage induction motor TEFC type

18.4 suitable for operation on 415 volts, 3 phase, 50 Hz, AC 0

supply with IP55 class of protection for enclosure,

horiziontal foot mounted type with Class-'F' insulation,

conforming to IS-325.

(c) M.S.fabricated common base plate, coupling, coupling

guard, foundation bolts etc.as required.

(d) Suitable cement concrete foundation duly plastered and

with anti vibration pads.

18.4.2 450 lpm at 35 m Head Set 1 86,203.00 86203

Supplying and fixing air vessel made of 250 mm dia, 8 mm

thick MS sheet, 1200 mm in height with air release valve on

top and flanged connection to riser, drain arrangement with

18.20 25 mm dia gun metal wheel valve with required Set 1 18,244.00 18244

accessories, pressure gauge and painting with synthetic

enamel paint of approved shade as required.

TOTAL CARRIED TO SUMMARY 104447 0

SUB HEAD - II - (HOSE REEL SYSTEM)

Digitally signed by Om Prakash

Date: 2025.07.18 21:56:26 IST

Supplying and fixing first-aid Hose Reel with MS

18.17 construction spray painted in post office red, conforming to

IS 884 complete with the following as required.

20 mm nominal internal dia water hose thermoplastic

(Textile reinforced) type -2 as per IS: 12585

20 mm nominal internal dia gun metal globe valve & nozzle

Drum and brackets for fixing the equipmets on wall.

Connections from riser with 25 mm dia stop gun metal valve

& M.S. Pipe & Socket

TOTAL CARRIED TO SUMMARY 86750 0

SUB HEAD - III - (PIPING, VALVES AND ACCESSORIES)

SLTC of M.S. pipe on surface

Providing, laying, testing & commissioning of 'C' class

heavy duty MS pipe conforming to IS 3589/IS 1239

including Welding, fittings like elbows, tees, flanges, tapers,

nuts bolts, gaskets etc. and fixing the pipe on the

18.7 wall/ceiling with suitable clamp/support frame and painting

with two or more coats of synthetic enamel paint of required

shade complete as required :

18.7.1 25 mm dia Metre 12 744.00 8556

18.7.7 100 mm dia Metre 58 2,555.00 148190

Digitally signed by Om Prakash

Date: 2025.07.18 21:56:26 IST

Supplying, fixing, testing and commissioning of butterfly

valve of PN 1.6 rating with bronze/gunmetal seat duly ISI

18.11 marked complete with nuts, bolts, washers, gasket

conforming to IS 13095 of following sizes as required :

18.11.5 100 mm dia Set 2 6,667.00 13334

Providing, installation, testing and commissioning of non-

return valve of following sizes confirming to IS: 5312

18.14 complete with rubber gasket, GI bolts, nuts, washers etc.as

required :

18.14.5 100mm dia Set 2 11,050.00 22100

Supply, Installation, Testing and Commissioning of 100 mm

dia Bourden type, Stainless Steel dial type Pressure Gauge

including brass isolation valve and siphon pipe having

MRF-01 calibration of 0-16 Kg / cm2 .as approved by architect and Each 10 1,996.00 19960

complete in all respect.. (MAKE:H-GURU / EQV.)

Providing & fixing double flanged Metallic expansion with

M.S. fixed flanges (PN-1.6) joint (suitable for system test

pressure) of standard length as per manufacturers specs

MRF-02 including rubber gaskets, flanges, nuts, bolts and washers

complete as required as per specificationsas approved by

architect and complete in all respect. (Make :- Electroflex /

100 mm dia Each 4 10,000.00 40000

18.18 Providing and fixing ball valve (brass) of approved quality,

DSR High or low pressure, with plastic floats complete :

Digitally signed by Om Prakash

Date: 2025.07.18 21:56:26 IST

18.18.3 25 mm nominal bore Each 10 464.05 4640.5

TOTAL CARRIED TO SUMMARY 196820.5 59960

SUB HEAD - IV - (FIRE EXTINGUISHERS)

Supply, installation, testing and commissioning of ISI

marked (IS:15683:2006) portable chemical fire extinguisher,

water (gas pressure) type capacity 9 litres with gun metal

cap and nozzle and complete in all respects including

MRF-03 initial fill and wall suspension brackets as required as per Each 10 9,957.00 99570

specificationsas approved by architect and complete in all

respect.(Make - Exflame)

Providing and fixing fire extinguisher of carbon dioxide type

consisting of brand new high pressure steel cylinder bearing

IS: 7285 mark and having the approval of controller of

explosives Nagpur, wheel type valve bearing IS:3224 mark

internal discharge tube, 1 meter long high pressure

MRF-04 discharge hose, non conducting horn, suspension bracket,

fully charged bearing IS: making fixed to wall as directed

conforming IS : 15683:2006as approved by architect and

complete in all respect.(Make - Exflame)

4.5kg capacity cylinder Each 10 7,049.00 70490

TOTAL CARRIED TO SUMMARY 0 170060

A) ELECTRICAL WORKS - PART -I - INTERNAL

WIRING

Digitally signed by Om Prakash

Date: 2025.07.18 21:56:26 IST

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm

FRLS PVC insulated copper conductor single core cable in surface / recessed

10 medium class PVC conduit, with modular switch, modular plate,suitable GI box and

earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single

core cable etc. as required.

1.10.1 Group A Point 2303 1015.00 2337951

Wiring for group controlled (looped) light point/exhaust fan point / call bell point

(without independent switch etc.) with 1.5 sq.mm FRLS PVC insulated copper

1.55 conductor single core cable in surface/recessed PVC conduit, and earthing the point

with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc.as

required.

1.55.1 Group A Point 1569 649.00 1018410.8

Wiring for twin control light point with 1.5 sq.mm FRLS PVC insulated copper

conductor single core cable in surface / recessed medium class PVC conduit, 2 way

1.11 modular switch modular plate, suitable GI box and earthing the point with 1.5 Point 166 1562.00 258511

sq.mm. FRLS PVC insulated copper conductor single core cable etc. as required.

Wiring for light/ power plug with 2X4 sq. mm FRLS PVC insulated copper conductor

single core cable in surface/ recessed medium class PVC conduit alongwith 1 No 4

1.12 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing Metre 8110 334.00 2708740

as required.

Wiring for light/ power plug with 4X4 sq. mm FRLS PVC insulated copper conductor

single core cable in surface/ recessed medium class PVC conduit alongwith 2 Nos 4

1.13 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing Metre 4055 537.00 2177535

as required.

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of

1.14 FRLS PVC insulated copper conductor, single core cable in surface/ recessed

medium class PVC conduit as required

1.14.2 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire Metre 15073 275.00 4145166.67

1.14.3 2 X 4 sq. mm + 1 X 4 sq. mm earth wire Metre 11420 334.00 3814280

1.14.4 2 X 6 sq. mm + 1 X 6 sq. mm earth wire Metre 3920 439.00 1720880

Supplying and drawing co-axial TV cable RG-6 grade, 0.7 mm solid copper

1.19 conductor PE insulated, shielded with fine tinned copper braid and protected with Metre 6120 47.00 287640

PVC sheath in the existing surface/ recessed steel/ PVC conduit as required.

Supplying and fixing of following sizes of medium class PVC conduit along with

1.21 accessories in surface/recess including cutting the wall and making good the same

in case of recessed conduit as required.

1.21.2 25 mm Metre 16000 145.00 2320000

1.21.4 40 mm Metre 4600 228.00 1048800

1.21.5 50 mm Metre 4025 284.00 1143100

Digitally signed by Om Prakash

Date: 2025.07.18 21:56:26 IST

Supplying and fixing following modular switch/ socket on the existing modular plate

1.24 & switch box including connections but excluding modular plate etc. as required.

1.24.1 5/6 amps switch Each 1292 103.00 133076

1.24.3 15/16 amp switch Each 808 156.00 126048

1.24.4 3 pin 5/6 amp socket outlet Each 1292 122.00 157624

1.24.5 6 pin 15/16 amp socket outlet Each 808 197.00 159176

1.24.6 Telephone Socket Outlet Each 8 148.00 1184

1.24.7 TV antenna socket Each 204 148.00 30192

Supplying and fixing two module stepped type electronic fan regulator on the

1.25 existing modular plate switch box including connections but excluding modular plate Each 808 369.00 298152

etc. as required.

Supplying and fixing modular blanking plate on the existing modular plate & switch

box excluding modular plate as required.

Supplying and fixing following size/ modules, GI box alongwith modular base &

cover plate for modular switches in recess etc as required.

1.27.1 1 or 2 Module (75 mmX75 mm) Each 224 298.00 66752

1.27.2 3 Module (100 mmX75 mm) Each 2100 327.00 686700

1.27.3 4 Module (125 mmX75 mm) Each 400 343.00 137200

1.27.4 6 Module (200 mmX75 mm) Each 204 402.00 82008

1.27.5 8 Module (125 mmX125 mm) Each 400 454.00 181600

Supplying and fixing following Modular base & cover plate on existing modular metal

boxes etc. as required.

1.28.1 1 or 2 Module (75 mmX75 mm) Each 224 133.00 29792

1.28.2 3 Module (100 mmX75 mm) Each 2100 151.00 317100

1.28.3 4 Module (125 mmX75 mm) Each 400 158.00 63200

1.28.4 6 Module (200 mmX75 mm) Each 204 182.00 37128

1.28.5 8 Module (125 mmX125 mm) Each 400 211.00 84400

Supplying, installation, testing and commissioning of 25A Modular socket (AC &

Geyser)

Supplying, installation, testing and commissioning of 25A Modular MCB (AC &

Geyser)

Supplying and fixing 3 pin, 5 amp ceiling rose on the existing junction box/ wooden

block including connection etc as required.

Digitally signed by Om Prakash

Date: 2025.07.18 21:56:26 IST

Supplying and fixing brass batten/ angle holder including connection etc. as

required.

Supplying and fixing call bell/ buzzer suitable for single phase, 230 volts, complete

as required.

Supplying, installation, testing and commissioning of following LED tube light

fitting including batten with Electronic Driver Heat sink Capacitor complete with

MRE-3 all other accessories on surface/ in false ceiling, including connection, earthing etc

complete as per specification and IP20, P.F. should be greater than 0.9. LED

chip efficacy ratio * 120 lumens /watt.

MRE-3 (a) 36 watt {4 feet} Nos 752 3150 2368800

MRE-3 (b) 11 watt {2 feet} Nos 208 1600 332800

Supplying, installation, testing and commissioning of 1200mm dia ceiling fan

including wiring the down rods of standard length up to 30 cm with 1.5 sq. mm

MRE-4 FRLS PVC insulated, copper conductor, single core cable, earthing etc. Nos 808 2580 2084640

complete as required. P.F. should be greater than 0.9, with BEE Star rating

from 3 star and above, IS: 374:2019 including all amendments.

Supplying, installation, testing and commissioning of following LED fitting

(luminaries) panel light in round/ square shape complete with electronic driver heat

MRE-5 sink capacitor and all other accessories on surface/ in false ceiling etc. as per 0

specification and P.F. should be greater than 0.9. LED chip efficacy ratio * 100

lumens /watt.

MRE-5 (a) 18 Watt Nos 331 3350 1108850

Supply, Installation, Testing & Commissioning of 18W WALL BRACKET LIGHT,

Housing Material Cast Aluminium with B22 Holder Tye, Diffuser Material PPR with

MRE-6 TIN Coated Powder Coated Finish, Suitable of used with 15W LED Lamp Nos 1540 1150 1771000

1.49 Numbering of ceiling fan/ exhaust fan/ fluorescent fittings as required. Each 1760 57.00 100320

Installation of exhaust fan in the existing opening, including making good the

damage, connection, testing, commissioning etc. as required.

1.50.1 Upto 450mm sweep Each 200 450.00 90000

Total of Sub Head 26125710.47 8270890

B) MCCB, MCB & DB'S

Supplying and fixing following way, single pole and neutral, sheet steel, MCB

distribution board, 240 volts, on surface/ recess, complete with tinned copper bus

2.3 bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including

earthing etc. as required. (But without MCB/RCCB/Isolator)

2.3.4 16 way, Double door Each 196 3141.00 615636

Digitally signed by Om Prakash

Date: 2025.07.18 21:56:26 IST

Supplying and fixing following way, horizontal type three pole and neutral, sheet

steel, MCB distribution board, 415 volts, on surface/ recess, complete with tinned

2.4 copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder 0

painted including earthing etc. as required. (But without MCB/RCCB/Isolator)

2.4.2 6 way (4 + 18), Double door Each 17 4974.00 84558

2.4.3 8 way (4 + 24), Double door Each 17 5967.00 101439

Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, "C" curve, miniature

2.10 circuit breaker suitable for inductive load of following poles in the existing MCB DB

complete with connections, testing and commissioning etc. as required

2.10.1 Single pole Each 2862 256.00 732672

Supplying and fixing following rating, double pole, (single phase and neutral), 240

2.14 volts, residual current circuit breaker (RCCB), having a sensitivity current upto 30

milliamperes in the existing

2.14.2 40 amps Each 298 2642.00 787316

Total of Sub Head 2321621 0

C) EARTHING

Earthing with G.I. earth pipe 4.5 metre long, 40 mm dia including accessories, and

5.2 providing masonry enclosure with cover plate having locking arrangement and Each 72 6855.00 493560

watering pipe etc. with charcoal/ coke and salt as required.

Providing and fixing 25 mm X 5 mm G.I. strip on surface or in recess for

connections etc. as required.

Metre 3360 244.00 819840

Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing as

required.

Metre 10000 70.00 700000

Total of Sub Head 2013400 0

D) LIGHTNING CONDUCTOR

Providing and fixing of lightning conductor finial, made of 25 mm dia 300 mm long,

6.2 G.I. tube, having single prong at top, with 85 mm dia 6 mm thick G.I. base plate Each 78 518.00 40404

including holes etc. complete as required.

Providing and fixing G.I. tape 20 mm X 3 mm thick on parapet or surface of wall for

lightning conductor complete as required. (For horizontal run)

Metre 420 126.00 52920

Providing and fixing G.I. tape 20 mm X 3 mm thick on parapet or surface of wall for

lightning conductor complete as required. (For vertical run)

Metre 765 197.00 150705

Providing and fixing testing joint, made of 20 mm X 3 mm thick G.I. strip, 125 mm

6.12 long, with 4 nos. of G.I. bolts, nuts, chuck nuts and spring washers etc. complete as Each 78 121.00 9438

required.

Earthing with G.I. earth pipe 4.5 metre long, 40 mm dia including accessories, and

5.2 providing masonry enclosure with cover plate having locking arrangement and Each 78 6855.00 534690

watering pipe etc. with charcoal/ coke and salt as required.

Digitally signed by Om Prakash

Date: 2025.07.18 21:56:26 IST

Total of Sub Head 788157 0

E) MV CABLE JOINTING & END TERMINATION

Supplying and making end termination with brass compression gland and aluminium

9.1 lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium

conductor cable of 1.1 KV grade as required.

9.1.1 2 X 6 sq. mm (19mm) Each 708 240.00 169920

9.1.23 3½ X 70 sq. mm (38mm) Each 356 468.00 166608

9.1.24 3½ X 95 sq. mm (45mm) Each 204 588.00 119952

9.1.31 3½ X 400 sq. mm (82mm) Each 84 1556.00 130704

9.1.32 4 X 10 sq. mm (25mm) Each 116 269.00 31204

9.1.33 4 X 16 sq. mm (28mm) Each 84 309.00 25956

Total of Sub Head 644344 0

F) EXTERNAL ELECTRICAL WORKS

SUPPLYING OF LIGHT FIXTURES/EXHAUST FAN/CEILING FAN

MRE-7 300mm Exhaust Fan with Louvers Nos. 200 2710 542000

DP MCB BOX

Supplying and fixing DP sheet steel enclosure in recess along eith 25/32 amps, 240

volts "C" curve DP MCB complete with connections, testing and commissioning etc

as required.

MRE-9 GI PIPE BRACKETS FOR 3 STEPPED STEELTUBULAR 0

SUPPLY & LAYING OF CABLE

supply & layingof the following size of 1.1 KV grade aluminium conductor

MRE-10 armoured power cable, XLPE as per is specification with latest amendment to be 0

laid 1 mtr below the ground level including excavation , sand cushioning, covering

with sand and bricks etc. as required.

MRE-10 (a) 3.5 x 400 sq mm A2XFY XLPE cable RM 500 6378 3189000

MRE-10 (b) 3.5 x 95 sq mm A2XFY XLPE cable RM 140 1556 217840

MRE-10 (c) 4 x 16 sq mm A2XFY XLPE cable RM 490 522 255780

MRE-10 (d) 2 x 6 sq mm Cu. UnArmoured cable (for DB I/C Cable) RM 4350 549 2388150

MRE-10 (e) 4 x 6 sq mm Cu. UnArmoured cable (for DB I/C Cable) RM 1240 911 1129640

MRE-10 (f) 4 x 10 sq mm Cu. UnArmoured cable (for DB I/C Cable) RM 1190 1412 1680280

Digitally signed by Om Prakash

Date: 2025.07.18 21:56:26 IST

LT PANELS (SUPPLY)

Supply/Receiving/handling/erection/testing/commissioning of cubicle type panels

fabericated out of 1.6 mm rust inhibited CRCA sheet steel bolted and modular

construction complete with incoming and out-going feeders, bus bars of electrolytic

MRE-11 grade aluminium duly insulated with heat shrinkable PVC sleeves and colour coded 0

and support on DMC/SMC supporters, outgoing feeders, meters, indicating as

specified and shown on line drawings. PCC shall be totally enclosed dust and

vermin proof construction with heavy duty neoprene gaskets. The floor mounting

panels shall be

provided with mounting channels. The construction of PCC panels shall be strictly

as per standard specifications. Panels shall incorporate double copper earthing bus,

cable alleys, bus bar chambers, bus interconnections. The panel shall be baked

enamel (Powder coated) painted. The panel shall be provided with name plate,

designation plate for all incoming outgoing feeders, danger plate, panels shall be

provided with steel lock and two key for eah panel should be provided and the key 0

should be common for all compartment/doors and Mechanical/Electrical interlocking

where ever it is required.Complete in all respet as required by the site -in- charge.de-

interlock facility, off-position and pad locking facility, etc. complete in all respects

and as per standard specifications and drawings. Panel shall be suitable for 50 KA

short-circuit rating.

METER BOARD PANEL TYPE - II

INCOMER

1 Nos. 100 Amp, FP, MCCB, 25kA, with rotory handle

1 Set R-Y-B Phase indicators with HRC fuse

1 Set Digital Multifunction Metre (V,I,Hz, Pf, KWh, KW etc)

MRE-11 (a) OUTGOINGS Nos 17 161407 2743919

12 Nos, 40 Amp MCB, DP, 10 kA, curve-C

12 Nos Space for 1ϕ KWh meters

BUSBAR

1 Set 125 Amp TP+100%N aluminium bus-bar duly coloured sleeved

METER BOARD PANEL TYPE - III

INCOMER

1 Nos. 100 Amp, FP, MCCB, 25kA, with rotory handle

1 Set R-Y-B Phase indicators with HRC fuse

1 Set Digital Multifunction Metre (V,I,Hz, Pf, KWh, KW etc)

MRE-11 (b) OUTGOINGS Nos 8 183417 1467336

12 Nos, 40 Amp MCB, DP, 10 kA

12 Nos Space for 1ϕ KWh meters

BUSBAR

1 Set 125 Amp T+100%PN aluminium bus-bar duly coloured sleeved

Digitally signed by Om Prakash

Date: 2025.07.18 21:56:26 IST

METER BOARD PANEL TYPE - V

INCOMER

1 Nos. 100 Amp, FP, MCCB, 25kA, with rotory handle

1 Set R-Y-B Phase indicators with HRC fuse

1 Set Digital Multifunction Metre (V,I,Hz, Pf, KWh, KW etc)

MRE-11 (c) OUTGOINGS Nos 1 134994 134994

6 Nos, 63 Amp MCB, FP, 10 kA, curve-C

6 Nos Space for 3ϕ KWh meters

BUSBAR

1 Set 125 Amp TP+100%N aluminium bus-bar duly coloured sleeved

MRE-11 (d) 1ϕ KWh Meter 40 Amp with LCD display Nos 196 1835 359660

MRE-11 (e) 3ϕ, 4 Wire, KWh Meter 40 Amp with LCD display Nos 4 3669 14676

K MAIN ELECTRICAL PANEL TYPE - 2 0

INCOMER 0

1No.800 A FP MCCB(35 KA) with PRTM 0

Metering & Indication 0

Multifunction digital meter (consisting of Voltage, Current, Frequency, PF, kWh, kVA

parameter) with RS-485 Port. 0

Sets of 800/5A, CL-1, 35VA CTs for measuring. 0

Sets of phase indicating lamp with 2A control MCBs. 0

BUS-BAR 0

1 Set of 850A TPN Aluminium Bus Bar with colour coded PVC Sleeves 0

OUTGOINGS 0

22 no 100 A 4P MCCB 0

MRE-11 (f) MAIN PANELdescrived above Meter 1 733666 733666

L MAIN ELECTRICAL PANEL TYPE - 3 0

INCOMER 0

1No.400 A FP MCCB(16 KA) with PRTM 0

Metering & Indication 0

Multifunction digital meter (consisting of Voltage, Current, Frequency, PF, kWh, kVA

parameter) with RS-485 Port. 0

Sets of 400/5A, CL-1, 35VA CTs for measuring. 0

Sets of phase indicating lamp with 2A control MCBs. 0

BUS-BAR 0

1 Set of 500A TPN Aluminium Bus Bar with colour coded PVC Sleeves 0

OUTGOINGS 0

Digitally signed by Om Prakash

Date: 2025.07.18 21:56:26 IST

10 no 100 A 4P MCCB 0

MRE-11 (g) MAIN PANELdescrived above Meter 1 513567 513567

Total Amount 0 15696308

Total Amount 0 15696308

G) CABLE TRAY

Ladder Cable Tray

Supply, laying, fixing Ladder and perforated type Cable Trays shall be

manufactured as per IS /IEC 61537 and it shall be of Pre Galvanized bolted type

and factory fabricated out of CRCA sheet with standard accessories like tees-

Horizontal and Vertical, Circular bends- Horizontal and Vertical, Coupler plates,

MRE-12 Reducers, 4-way cross, Tray covers, Fasteners. etc. for different loads and number 0

and size of cables as given below. All indoor type cable trays shall be galvanized

according to BS EN /IEC 10346 with 275 GSM and All outdoor type cable trays shall

be Hot dip galvanized according to DIN EN ISO 1461 with 60 microns.

MRE-12 (a) 600mm x 100mm x 3mm Meter 320 1532 490240

Runners 20 x 150 x 20 x 2.5 mm

Rungs 20 x 30 x 20 x 2.5 mm 250 mm C/C 0

MRE-12 (b) 300mm x 100mm x 3mm Meter 480 1255 602400

Runners 20 x 150 x 20 x 2.5 mm

Rungs 20 x 30 x 20 x 2.5 mm 250 mm C/C 0

Providing & fixing 32mm x 32mm x 5mm GI angle suspenders & 40mm x 40mm x

MRE-13 5mm base supports for ladder cable trays of size 750mm & 600mm with all Kg 360 261 93960

necessary fixing accessories.

Providing & fixing 25mm x 25mm x 5mm GI angle suspenders & 40mm x 40mm x

MRE-14 5mm base supports for ladder cable trays of size 450mm & below with all necessary Kg 590 144 84960

fixing accessories.

Perforated Cable Tray

Supplying and installing following size of perforated painted M.S cable trays with

perforation not more than 17.5%, inconvenient sections, joined with connectors,

4.1 suspended from the ceiling with M.S. suspenders including bolts&nuts, painting

suspenders etc as required.

4.1.2 150 mm width X 50 mm depth X 1.6mm thickness Meter 260 604.00 157040

4.1.4 300 mm width X 50 mm depth X 1.6mm thickness Meter 570 777.00 442890

Total Of Sub Head Cable Tray 599930 1271560

Digitally signed by Om Prakash

Date: 2025.07.18 21:56:26 IST